+ Added xTaskCatchUpTicks() which corrects the tick count value after the application code has held interrupts disabled for an extended period.
+ Updated the xTaskResumeAll() implementation so it uses the new xTaskCatchUpTicks() function mentioned above to unwind ticks that were pended while the scheduler was suspended.
+ Various maintenance on the message buffer, stream buffer and abort delay demos.
+ Change type of uxPendedTicks from UBaseType_t to TickType_t to ensure it has same type as variables it is compared to, and therefore also rename the variable xPendingTicks.
+ Correct spelling mistake within a comment that was common to all the ARMv7-M ports.
+ Add configASSERT() into ARM Cortex-M ports to check the number of priority
bit settings.
+ Clear the 'control' register before starting ARM Cortex-M4F ports in case
the FPU is used before the scheduler is started. This just saves a few
bytes on the main stack as it prevents space being left for a later save
of FPU registers.
+ Added xSemaphoreGetMutexHolderFromISR().
+ Corrected use of portNVIC_PENDSVSET to portNVIC_PENDSVSET_BIT in MPU ports.
- Clear the SysTick current value register before starting the SysTick (only required if something uses SysTick before starting the scheduler).
- Ensure atomic operations are thread safe by executing clrex in the context switch.
+ Set flash wait states on MSP432 demos.
+ Remove use of obsolete IO library in PIC32 demos.
+ Remove obsolete item left on stack of first task to run in the Cortex-M0 ports.
+ Correct IA32 GCC vPortExitCritical() implementation when configMAX_API_CALL_INTERRUPT_PRIORITY == portMAX_PRIORITY.
Add RVDS ARM Cortex-M4F MPU port.
Increase the size of each buffer allocated to pbufs in the Microblaze lwIP demo to prevent pbufs chaining.
Use _start as the top of the stack for each Microblaze task, rather than NULL, as NULL was causing the Xilinx SDK to try and unwind the stack too far.
Tidy up CEC1302 demo.
Ensure bit 0 of the task address is clear when setting up stack of initial Cortex-M3/4/7 stacks (for strict compliance, although not practically necessary).
vTaskGetTaskInfo() changed to vTaskGetInfo() - with a macro added for backward compatibility.
Fix build error when configSUPPORT_STATIC_ALLOCATION and configNUM_THREAD_LOCAL_STORAGE_POINTERS were greater than zero at the same time.
Allow the pdMS_TO_TICKS macro to be overridden by a definition in FreeRTOSConfig.h.
- Remove the standard demo files that used the [long since deprecated] alternative API.
- Add standard demo task that tests the new xTaskAbortDelay() function.
- Update the Win32 Visual Studio project to use Visual Studio 2015 Community Edition.
- Rename the xGenericListItem TCB member to xStateListItem as it better describes the member's purpose.
+ Added xPortIsInsideInterrupt() to RVDS ARM CM4F port - the same will get added to other ports in time.
Demo application code:
+ Added first pass Microchip CEC1302 demo for Keil.
+ Harden the new StaticAllocation.c standard demo tasks against integer promotion rules causing problems on 16-bit architectures.
+ Updated all ARM Cortex-M0 ports to include an additional ISB instruction as the scheduler is started.
Demo app files:
+ Fixex build issues in XMC1000 demos.
+ Support tickless idle when configUSE_PREEMPTION is 0 (previously tickless idle was only supported when the pre-emptive scheduler was being used).
+ If a stack was statically allocated, then don't try freeing it if the TCB cannot be allocated.
+ Remove use of INCLUDE_xEventGroupsSetBitsFromISR() pre-processor macro, as it was not tested anyway.
Demo app changes:
+ Updated SAM4L Atmel Studio project to use Atmel Studio 7.
Exclude the entire croutine.c file when configUSE_CO_ROUTINES is 0.
New ports:
Added Cortex-M7 IAR and Keil port layers that include a minor errata workaround r0p1 Cortex-M7 devices.
Added Cortex-M4F port layer for CCS.
New demo applications:
Added demo application for STM32F7.
Added demo application for SAMv71.
+ Made xTaskNotifyGiveFromISR() its own function, rather than a macro that calls xTaskNotifyFromISR() (minor performance improvement).
+ GCC and Keil Cortex-M4F ports now use vPortRaiseBASEPRI() in place of ulPortRaiseBASEPRI() where the return value is not required (minor performance improvement).
Demo changes:
Change the [very basic] FreeRTOS+UDP SAM4E driver to use task notifications rather than a semaphore (execution time now 55% what it was in FreeRTOS V8.1.2!).
Robustness improvements to IntQueue.c standard demo task.h.
Added the latest standard demo tasks, reg test tasks and int q tasks to the SAM4E demo.
+ Fix a few compiler warnings.
+ Add TickType_t specific critical sections so critical sections are not used when accessing the tick count in cases where the access is atomic (32-bit tick count, 32-bit architecture).
+ Optimise Cortex-M4F ports by inlining some critical section macros.
+ Original ports used a #define to set the path to portmacro.h - that method has been obsolete for years and now all the old definitions have been moved into a separate header files called deprecated_definitions.h.
+ Cortex-M port now check the active vector bits against 0xff when determining if a function is called from an interrupt - previously only a subset of the bits (0x1f) were checked.
+ Add in new standard demo/test files TaskNotify.c/h and include the files in the simulator demos.
+ Update trace recorder code, and some demos to use the new version (more to do).
+ Introduce uxTaskPriorityGetFromISR().
+ Minor typo corrections.
+ Update MingW simulator demo to match the MSVC simulator demo.
+ Update the RZ IAR project so it targets the RZ RSK rather than custom hardware.
+ Update the RZ ARM/DS-5 project so it targets the RZ RSK rather than custom hardware.
+ Updated RX64M demos to use the new iodefine.h naming.
Cortex-A9 port related:
+ Update IAR, ARM and GCC Cortex-A9 port layers to include a 'task exit error' function which is called if a task attempts to incorrectly exit its implementing function.
+ Moved the instruction which switches into system mode out of the restore context macro, as it is only needed when starting the first task.
Core kernel files related:
+ Ensure there are no references to the mutexes held count when mutexes are excluded from the build.
Add additional asserts to the Keil CM3 and CM4F ports (other CM3/4 ports already updated).
Add the additional yield necessitated by the mutex held count to the case when configUSE_QUEUE_SETS is 0.
