Verify that the application has correctly installed PendSV
and SVCall handlers. The application can choose to
disable these checks by setting configCHECK_HANDLER_INSTALLATION
to 0 in their FreeRTOSConfig.h.
* Add SMP template port and example
* Add readme file for smp configuration
* Update SMP build flow and add CI build
---------
Co-authored-by: Soren Ptak <ptaksoren@gmail.com>
Co-authored-by: Rahul Kar <118818625+kar-rahul-aws@users.noreply.github.com>
* Add portMEMORY_BARRIER() to RX MCU ports
* Remove the memory barrier from the SH2A_FPU portable directory
---------
Co-authored-by: Rahul Kar <118818625+kar-rahul-aws@users.noreply.github.com>
Earlier the System Call entry from an unprivileged task
looked like:
1. SVC for entering system call.
2. System call implementation.
3. SVC for exiting system call.
Now, the system call entry needs to make only one SVC
call and everything else is handled internally.
This PR also makes the following changes:
1. Update the Access Control List (ACL) mechanism to
grant access to all the kernel objects before the
scheduler is started.
2. Add one struct param for system calls with 5 parameters.
This removes the need for special handling for system
calls with 5 parameters.
3. Remove raise privilege SVC when MPU wrapper v2 is used.
4. Add additional run time parameter checks to MPU wrappers
for xTaskGenericNotify and xQueueTakeMutexRecursive APIs.
The Cortex-A53 ports are generic and can be used as a starting point
for other Armv8-A application processors. Therefore, rename
`ARM_CA53_64_BIT` to `Arm_AARCH64` and `ARM_CA53_64_BIT_SRE` to
`Arm_AARCH64_SRE`.
With this renaming, existing projects that use old port, should
migrate to renamed port as follows:
* `ARM_CA53_64_BIT` -> `Arm_AARCH64`
* `ARM_CA53_64_BIT_SRE` -> `Arm_AARCH64_SRE`
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
* Support configurable RISC-V chip extension
Added the FREERTOS_RISCV_EXTENSION option to allow the user
to select which chip extension they want included. Removed the
port for pulpino to instead use the new option.
* Add port GCC_RISC_V_GENERIC and IAR_RISC_V_GENERIC
* Add two rics-v generic ports to support FREERTOS_RISCV_EXTENSION
config
---------
Co-authored-by: Joe Benczarski <jbenczarski@trijicon.com>
Co-authored-by: chinglee-iot <61685396+chinglee-iot@users.noreply.github.com>
Co-authored-by: Ching-Hsin Lee <chinglee@amazon.com>
Co-authored-by: kar-rahul-aws <118818625+kar-rahul-aws@users.noreply.github.com>
Co-authored-by: Soren Ptak <ptaksoren@gmail.com>
* fix build on 64 bit platform
* moving sample cmake project to a separate root level dir
* moving sample cmake project to a separate root level dir
* updating paths for the sample cmake project
* rename example folder
* use configKERNEL_PROVIDED_STATIC_MEMORY
* update comments
* update comments
* rename folder to examples
* fix formatting
* removed the copyright and license header for files expected to be copied by users
* fixed a bug in the kernel checker. temporarily restored the copyright in the sample config to allow this PR to pass the checks.
* Uncrustify: triggered by comment.
---------
Co-authored-by: GitHub Action <action@github.com>
Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
Aligns the stack end to a page boundary before computing its
size, since the size depends on both the start and end.
The original change which introduced stack alignment (#674)
only worked for cases where the round + trunc operation would
wind up within the same area, but would lead to segfaults in
other cases.
Also adds a typecast to the `mach_vm_round_page()` call, as
it is actually a macro which casts to `mach_vm_offset_t` and
the result here is used as a `StackType_t` pointer.
Tested on ARM64 and Intel MacOS, as well as ARM64 and Intel
Linux. The test code included a single-task case, as well
as a case with two tasks passing queue messages.
* config file experiments
* adding a config file for an example
* Added a template port and updated the CMakeLists
* template and default configuration build
* finalising the sample FreeRTOSConfig.h header file
* removed .config hidden file
* further reductions in the template port
* Uncrustify: triggered by comment.
* Uncrustify: triggered by comment.
* minor readme updates
* fixed spelling error in HTTP
* fixed a type and added a link to the sample readme
* uncrustified FreeRTOSConfig.h
* Uncrustify: triggered by comment.
* Revert "Uncrustify: triggered by comment."
This reverts commit e534f46f2d.
* Revert "Revert "Uncrustify: triggered by comment.""
This reverts commit c9058dd383.
* excluding the FreeRTOSConfig.h from copyright+license check because this file is intended to be incorporated into user code
* Removed the copyright and license from the template files
* put license copy in the template and sample files
* Uncrustify: triggered by comment.
---------
Co-authored-by: GitHub Action <action@github.com>
According to Armv8-M technical reference manual, if the main extension
is not implemented then PSPLIM_NS is RES0. Update the cortex-M23
port to not use the reserved PSPLIM_NS.
A task's privilege level is stored in ulTaskFlag member in the TCB. Current
implementation of portSWITCH_TO_USER_MODE() does not update this
flag but just lowers the processor's privilege level. This results in many
APIs incorrectly determining task's privilege level and access permissions -
- xPortIsAuthorizedToAccessBuffer
- xPortIsTaskPrivileged
- xPortIsAuthorizedToAccessKernelObject
This PR fixes the portSWITCH_TO_USER_MODE() implementation to correctly
update the ulTaskFlag member in the TCB before lowering the processor's
privilege level.
Add trace hook macro for most ports
In pull request #659 we introduced better support for tracing
tools like systemview. This patchset adds support for more
ports as requested in the original pull request.
This PR adds Access Control to kernel objects on a per task basis to MPU
ports. The following needs to be defined in the `FreeRTOSConfig.h` to
enable this feature:
```c
#define configUSE_MPU_WRAPPERS_V1 0
#define configENABLE_ACCESS_CONTROL_LIST 1
```
This PR adds the following new APIs:
```c
void vGrantAccessToTask( TaskHandle_t xTask,
TaskHandle_t xTaskToGrantAccess );
void vRevokeAccessToTask( TaskHandle_t xTask,
TaskHandle_t xTaskToRevokeAccess );
void vGrantAccessToSemaphore( TaskHandle_t xTask,
SemaphoreHandle_t xSemaphoreToGrantAccess );
void vRevokeAccessToSemaphore( TaskHandle_t xTask,
SemaphoreHandle_t xSemaphoreToRevokeAccess );
void vGrantAccessToQueue( TaskHandle_t xTask,
QueueHandle_t xQueueToGrantAccess );
void vRevokeAccessToQueue( TaskHandle_t xTask,
QueueHandle_t xQueueToRevokeAccess );
void vGrantAccessToQueueSet( TaskHandle_t xTask,
QueueSetHandle_t xQueueSetToGrantAccess );
void vRevokeAccessToQueueSet( TaskHandle_t xTask,
QueueSetHandle_t xQueueSetToRevokeAccess );
void vGrantAccessToEventGroup( TaskHandle_t xTask,
EventGroupHandle_t xEventGroupToGrantAccess );
void vRevokeAccessToEventGroup( TaskHandle_t xTask,
EventGroupHandle_t xEventGroupToRevokeAccess );
void vGrantAccessToStreamBuffer( TaskHandle_t xTask,
StreamBufferHandle_t xStreamBufferToGrantAccess );
void vRevokeAccessToStreamBuffer( TaskHandle_t xTask,
StreamBufferHandle_t xStreamBufferToRevokeAccess );
void vGrantAccessToMessageBuffer( TaskHandle_t xTask,
MessageBufferHandle_t xMessageBufferToGrantAccess );
void vRevokeAccessToMessageBuffer( TaskHandle_t xTask,
MessageBufferHandle_t xMessageBufferToRevokeAccess );
void vGrantAccessToTimer( TaskHandle_t xTask,
TimerHandle_t xTimerToGrantAccess );
void vRevokeAccessToTimer( TaskHandle_t xTask,
TimerHandle_t xTimerToRevokeAccess );
```
An unprivileged task by default has access to itself only and no other
kernel object. The application writer needs to explicitly grant an
unprivileged task access to all the kernel objects it needs. The best
place to do that is before starting the scheduler when all the kernel
objects are created.
For example, let's say an unprivileged tasks needs access to a queue and
an event group, the application writer needs to do the following:
```c
vGrantAccessToQueue( xUnprivilegedTaskHandle, xQueue );
vGrantAccessToEventGroup( xUnprivilegedTaskHandle, xEventGroup );
```
The application writer MUST revoke all the accesses before deleting a
task. Failing to do so will result in undefined behavior. In the above
example, the application writer needs to make the following 2 calls
before deleting the task:
```c
vRevokeAccessToQueue( xUnprivilegedTaskHandle, xQueue );
vRevokeAccessToEventGroup( xUnprivilegedTaskHandle, xEventGroup );
```
* Add Trace Hook Macros and function that returns the start of the stack.
* Remove obsolete functions.
---------
Co-authored-by: kar-rahul-aws <118818625+kar-rahul-aws@users.noreply.github.com>
Co-authored-by: Rahul Kar <karahulx@amazon.com>
Co-authored-by: chinglee-iot <61685396+chinglee-iot@users.noreply.github.com>
* Use new version of CI-CD Actions
* Use cSpell spell check, and use ubuntu-20.04 for formatting check
* Format and spell check all files in the portable directory
* Remove the https:// from #errors and #warnings as uncrustify attempts to change it to /*
* Use checkout@v3 instead of checkout@v2 on all jobs
---------
Setting configENABLE_HEAP_PROTECTOR to 1 obfuscates heap
block pointers by XORing them with an application supplied
canary value. This obfuscation helps to catch heap corruption
should a heap buffer overflow occur.
This PR also adds heap bounds checking to heap_4 and heap_5.
This PR also adds some additional integer underflow checks.
