Continued to work on the MQTT demo project.

A few review comments added into the MQTT implementation.
This commit is contained in:
Richard Barry 2019-07-24 00:27:14 +00:00
parent 53842d4cac
commit fe4511b35e
21 changed files with 244 additions and 166 deletions

View file

@ -138,10 +138,8 @@ configNETWORK_INTERFACE_TO_USE to 2 results in the wireless network being
used. */
#define configNETWORK_INTERFACE_TO_USE 3L
/* The address of an echo server that will be used by the two demo echo client
tasks.
http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_Echo_Clients.html
http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/UDP_Echo_Clients.html */
/* The address of an echo server is only left in this project as it douples as
the address to which logging is sent should UDP logging be enabled. */
#define configECHO_SERVER_ADDR0 192
#define configECHO_SERVER_ADDR1 168
#define configECHO_SERVER_ADDR2 0
@ -154,9 +152,9 @@ configNETWORK_INTERFACE_TO_USE definition above for information on how to
configure the real network connection to use. */
#define configMAC_ADDR0 0x00
#define configMAC_ADDR1 0x11
#define configMAC_ADDR2 0x22
#define configMAC_ADDR3 0x33
#define configMAC_ADDR4 0x44
#define configMAC_ADDR2 0x11
#define configMAC_ADDR3 0x11
#define configMAC_ADDR4 0x11
#define configMAC_ADDR5 0x41
/* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or
@ -202,5 +200,11 @@ ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */
#define strncasecmp _strnicmp
#define strcmpi _strcmpi
/* Prototype for the function used to print out. In this case it prints to the
console before the network is connected then a UDP port after the network has
connected. */
extern void vLoggingPrintf( const char *pcFormatString, ... );
#define configPRINTF( X ) vLoggingPrintf X
#endif /* FREERTOS_CONFIG_H */