mirror of
https://github.com/FreeRTOS/FreeRTOS-Kernel.git
synced 2025-04-23 06:51:58 -04:00
Added first version of the "full" build configuration to the FM3/IAR demo.
This commit is contained in:
Richard Barry
parent
fdceeeb190
commit
f6bf081cdb
|
|
@ -59,31 +59,36 @@
|
||||||
#include "FreeRTOS.h"
|
#include "FreeRTOS.h"
|
||||||
#include "task.h"
|
#include "task.h"
|
||||||
|
|
||||||
/* Library includes. */
|
/* Fujitsu drivers/libraries. */
|
||||||
#include "mss_gpio.h"
|
#include "mb9bf506n.h"
|
||||||
|
#include "system_mb9bf50x.h"
|
||||||
|
|
||||||
|
/* Only the LEDs on one of the two seven segment displays are used. */
|
||||||
#define partstMAX_LEDS 8
|
#define partstMAX_LEDS 8
|
||||||
|
|
||||||
static volatile unsigned long ulGPIOState = 0UL;
|
/* The LEDs are controlled by bits 8 to 15 of the IO port. */
|
||||||
|
#define partstLED_0_OFFSET 8
|
||||||
|
|
||||||
/*-----------------------------------------------------------*/
|
/*-----------------------------------------------------------*/
|
||||||
|
|
||||||
void vParTestInitialise( void )
|
void vParTestInitialise( void )
|
||||||
{
|
{
|
||||||
long x;
|
const unsigned short usGPIOState = 0xFF00U;
|
||||||
|
|
||||||
/* Initialise the GPIO */
|
/* Analog inputs are not used on the LED outputs. */
|
||||||
MSS_GPIO_init();
|
FM3_GPIO->ADE = 0x00FF;
|
||||||
|
|
||||||
/* Set up GPIO for the LEDs. */
|
/* LED seg1 to GPIO output (P18->P1F). */
|
||||||
for( x = 0; x < partstMAX_LEDS; x++ )
|
FM3_GPIO->DDR1 = 0xFF00;
|
||||||
{
|
FM3_GPIO->PFR1 = 0x0000;
|
||||||
MSS_GPIO_config( ( mss_gpio_id_t ) x , MSS_GPIO_OUTPUT_MODE );
|
|
||||||
}
|
|
||||||
|
|
||||||
/* All LEDs start off. */
|
/* LED seg2 to GPIO output (P30->P3F). */
|
||||||
ulGPIOState = 0xffffffffUL;
|
FM3_GPIO->DDR3 = 0xFF00;
|
||||||
MSS_GPIO_set_outputs( ulGPIOState );
|
FM3_GPIO->PFR3 = 0x0000;
|
||||||
|
|
||||||
|
/* Start with all LEDs off. */
|
||||||
|
FM3_GPIO->PDOR3 = usGPIOState;
|
||||||
|
FM3_GPIO->PDOR1 = usGPIOState;
|
||||||
}
|
}
|
||||||
/*-----------------------------------------------------------*/
|
/*-----------------------------------------------------------*/
|
||||||
|
|
||||||
|
|
@ -97,14 +102,12 @@ void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
|
||||||
{
|
{
|
||||||
if( xValue == pdTRUE )
|
if( xValue == pdTRUE )
|
||||||
{
|
{
|
||||||
ulGPIOState &= ~( 1UL << uxLED );
|
FM3_GPIO->PDOR3 &= ~( 1UL << ( uxLED + partstLED_0_OFFSET ) );
|
||||||
}
|
}
|
||||||
else
|
else
|
||||||
{
|
{
|
||||||
ulGPIOState |= ( 1UL << uxLED );
|
FM3_GPIO->PDOR3 |= ( 1UL << ( uxLED + partstLED_0_OFFSET ) );
|
||||||
}
|
}
|
||||||
|
|
||||||
MSS_GPIO_set_outputs( ulGPIOState );
|
|
||||||
}
|
}
|
||||||
taskEXIT_CRITICAL();
|
taskEXIT_CRITICAL();
|
||||||
}
|
}
|
||||||
|
|
@ -121,14 +124,12 @@ unsigned portBASE_TYPE uxInterruptFlags;
|
||||||
{
|
{
|
||||||
if( xValue == pdTRUE )
|
if( xValue == pdTRUE )
|
||||||
{
|
{
|
||||||
ulGPIOState &= ~( 1UL << uxLED );
|
FM3_GPIO->PDOR3 &= ~( 1UL << ( uxLED + partstLED_0_OFFSET ) );
|
||||||
}
|
}
|
||||||
else
|
else
|
||||||
{
|
{
|
||||||
ulGPIOState |= ( 1UL << uxLED );
|
FM3_GPIO->PDOR3 |= ( 1UL << ( uxLED + partstLED_0_OFFSET ) );
|
||||||
}
|
}
|
||||||
|
|
||||||
MSS_GPIO_set_outputs( ulGPIOState );
|
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
portCLEAR_INTERRUPT_MASK_FROM_ISR( uxInterruptFlags );
|
portCLEAR_INTERRUPT_MASK_FROM_ISR( uxInterruptFlags );
|
||||||
|
|
@ -143,16 +144,14 @@ void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
|
||||||
interrupt. */
|
interrupt. */
|
||||||
taskENTER_CRITICAL();
|
taskENTER_CRITICAL();
|
||||||
{
|
{
|
||||||
if( ( ulGPIOState & ( 1UL << uxLED ) ) != 0UL )
|
if( ( FM3_GPIO->PDOR3 & ( 1UL << ( uxLED + partstLED_0_OFFSET ) ) ) != 0UL )
|
||||||
{
|
{
|
||||||
ulGPIOState &= ~( 1UL << uxLED );
|
FM3_GPIO->PDOR3 &= ~( 1UL << ( uxLED + partstLED_0_OFFSET ) );
|
||||||
}
|
}
|
||||||
else
|
else
|
||||||
{
|
{
|
||||||
ulGPIOState |= ( 1UL << uxLED );
|
FM3_GPIO->PDOR3 |= ( 1UL << ( uxLED + partstLED_0_OFFSET ) );
|
||||||
}
|
}
|
||||||
|
|
||||||
MSS_GPIO_set_outputs( ulGPIOState );
|
|
||||||
}
|
}
|
||||||
taskEXIT_CRITICAL();
|
taskEXIT_CRITICAL();
|
||||||
}
|
}
|
||||||
|
|
@ -167,7 +166,7 @@ long lReturn = pdFALSE;
|
||||||
{
|
{
|
||||||
taskENTER_CRITICAL();
|
taskENTER_CRITICAL();
|
||||||
{
|
{
|
||||||
if( ( ulGPIOState & ( 1UL << ulLED ) ) == 0UL )
|
if( ( FM3_GPIO->PDOR3 & ( 1UL << ( ulLED + partstLED_0_OFFSET ) ) ) == 0UL )
|
||||||
{
|
{
|
||||||
lReturn = pdTRUE;
|
lReturn = pdTRUE;
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -874,6 +874,878 @@
|
||||||
</plugin>
|
</plugin>
|
||||||
</debuggerPlugins>
|
</debuggerPlugins>
|
||||||
</configuration>
|
</configuration>
|
||||||
|
<configuration>
|
||||||
|
<name>Full</name>
|
||||||
|
<toolchain>
|
||||||
|
<name>ARM</name>
|
||||||
|
</toolchain>
|
||||||
|
<debug>1</debug>
|
||||||
|
<settings>
|
||||||
|
<name>C-SPY</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>22</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>CInput</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CEndian</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CProcessor</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCVariant</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacFile</name>
|
||||||
|
<state>$PROJ_DIR$\config\Ram_VTOR.mac</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MemOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MemFile</name>
|
||||||
|
<state>$TOOLKIT_DIR$\CONFIG\debugger\Fujitsu\iomb9bf506n.ddf</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>RunToEnable</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>RunToName</name>
|
||||||
|
<state>main</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CExtraOptionsCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CExtraOptions</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CFpuProcessor</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDDFArgumentProducer</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDownloadSuppressDownload</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDownloadVerifyAll</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCProductVersion</name>
|
||||||
|
<state>5.50.5.51996</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDynDriverList</name>
|
||||||
|
<state>JLINK_ID</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCLastSavedByProductVersion</name>
|
||||||
|
<state>6.20.1.52589</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDownloadAttachToProgram</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>UseFlashLoader</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CLowLevel</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCBE8Slave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacFile2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CDevice</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FlashLoadersV3</name>
|
||||||
|
<state>$PROJ_DIR$\config\flashloader\FlashLoader.board</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck1</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath1</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck3</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath3</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OverrideDefFlashBoard</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesOffset1</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesOffset2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesOffset3</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesUse1</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesUse2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesUse3</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>ARMSIM_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>1</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>OCSimDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCSimEnablePSP</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCSimPspOverrideConfig</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCSimPspConfigFile</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>ANGEL_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>0</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>CCAngelHeartbeat</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CAngelCommunication</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CAngelCommBaud</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>3</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CAngelCommPort</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ANGELTCPIP</name>
|
||||||
|
<state>aaa.bbb.ccc.ddd</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DoAngelLogfile</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AngelLogFile</name>
|
||||||
|
<state>$PROJ_DIR$\cspycomm.log</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>GDBSERVER_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>0</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>OCDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TCPIP</name>
|
||||||
|
<state>aaa.bbb.ccc.ddd</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DoLogfile</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>LogFile</name>
|
||||||
|
<state>$PROJ_DIR$\cspycomm.log</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJTagBreakpointRadio</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJTagDoUpdateBreakpoints</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJTagUpdateBreakpoints</name>
|
||||||
|
<state>_call_main</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>IARROM_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>1</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>CRomLogFileCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRomLogFileEditB</name>
|
||||||
|
<state>$PROJ_DIR$\cspycomm.log</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRomCommPort</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRomCommBaud</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>7</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>JLINK_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>13</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>JLinkSpeed</name>
|
||||||
|
<state>32</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkDoLogfile</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkLogFile</name>
|
||||||
|
<state>$PROJ_DIR$\cspycomm.log</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkHWResetDelay</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>JLinkInitialSpeed</name>
|
||||||
|
<state>32</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCDoJlinkMultiTarget</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCScanChainNonARMDevices</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkMultiTarget</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkIRLength</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkCommRadio</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkTCPIP</name>
|
||||||
|
<state>aaa.bbb.ccc.ddd</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkSpeedRadioV2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCUSBDevice</name>
|
||||||
|
<version>1</version>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchReset</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchUndef</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchSWI</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchData</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchPrefetch</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchIRQ</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchFIQ</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkBreakpointRadio</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkDoUpdateBreakpoints</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkUpdateBreakpoints</name>
|
||||||
|
<state>_call_main</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkInterfaceRadio</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCJLinkAttachSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkResetList</name>
|
||||||
|
<version>5</version>
|
||||||
|
<state>7</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkInterfaceCmdLine</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCatchCORERESET</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCatchMMERR</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCatchNOCPERR</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCatchCHRERR</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCatchSTATERR</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCatchBUSERR</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCatchINTERR</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCatchHARDERR</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCatchDummy</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCJLinkScriptFile</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkUsbSerialNo</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCTcpIpAlt</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJLinkTcpIpSerialNo</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCpuClockEdit</name>
|
||||||
|
<state>72.0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCSwoClockAuto</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCSwoClockEdit</name>
|
||||||
|
<state>2000</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>LMIFTDI_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>2</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>OCDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>LmiftdiSpeed</name>
|
||||||
|
<state>500</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCLmiftdiDoLogfile</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCLmiftdiLogFile</name>
|
||||||
|
<state>$PROJ_DIR$\cspycomm.log</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCLmiFtdiInterfaceRadio</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCLmiFtdiInterfaceCmdLine</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>MACRAIGOR_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>3</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>jtag</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EmuSpeed</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TCPIP</name>
|
||||||
|
<state>aaa.bbb.ccc.ddd</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DoLogfile</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>LogFile</name>
|
||||||
|
<state>$PROJ_DIR$\cspycomm.log</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DoEmuMultiTarget</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EmuMultiTarget</name>
|
||||||
|
<state>0@ARM7TDMI</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EmuHWReset</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CEmuCommBaud</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>4</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CEmuCommPort</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>jtago</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>UnusedAddr</name>
|
||||||
|
<state>0x00800000</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCMacraigorHWResetDelay</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJTagBreakpointRadio</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJTagDoUpdateBreakpoints</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJTagUpdateBreakpoints</name>
|
||||||
|
<state>_call_main</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCMacraigorInterfaceRadio</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCMacraigorInterfaceCmdLine</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>PEMICRO_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>0</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>OCDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCPEMicroAttachSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPEMicroInterfaceList</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPEMicroResetDelay</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPEMicroJtagSpeed</name>
|
||||||
|
<state>#UNINITIALIZED#</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJPEMicroShowSettings</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DoLogfile</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>LogFile</name>
|
||||||
|
<state>$PROJ_DIR$\cspycomm.log</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPEMicroUSBDevice</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPEMicroSerialPort</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCJPEMicroTCPIPAutoScanNetwork</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPEMicroTCPIP</name>
|
||||||
|
<state>10.0.0.1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPEMicroCommCmdLineProducer</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>RDI_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>2</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>CRDIDriverDll</name>
|
||||||
|
<state>###Uninitialized###</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRDILogFileCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRDILogFileEdit</name>
|
||||||
|
<state>$PROJ_DIR$\cspycomm.log</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDIHWReset</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchReset</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchUndef</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchSWI</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchData</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchPrefetch</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchIRQ</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRDICatchFIQ</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>STLINK_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>2</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>OCDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCSTLinkInterfaceRadio</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCSTLinkInterfaceCmdLine</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCSTLinkResetList</name>
|
||||||
|
<version>1</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCpuClockEdit</name>
|
||||||
|
<state>72.0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCSwoClockAuto</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCSwoClockEdit</name>
|
||||||
|
<state>2000</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>THIRDPARTY_ID</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>0</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>CThirdPartyDriverDll</name>
|
||||||
|
<state>###Uninitialized###</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CThirdPartyLogFileCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CThirdPartyLogFileEditB</name>
|
||||||
|
<state>$PROJ_DIR$\cspycomm.log</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCDriverInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<debuggerPlugins>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\FreeRTOS\FreeRTOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
</debuggerPlugins>
|
||||||
|
</configuration>
|
||||||
</project>
|
</project>
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -899,6 +899,904 @@
|
||||||
<data/>
|
<data/>
|
||||||
</settings>
|
</settings>
|
||||||
</configuration>
|
</configuration>
|
||||||
|
<configuration>
|
||||||
|
<name>Full</name>
|
||||||
|
<toolchain>
|
||||||
|
<name>ARM</name>
|
||||||
|
</toolchain>
|
||||||
|
<debug>1</debug>
|
||||||
|
<settings>
|
||||||
|
<name>General</name>
|
||||||
|
<archiveVersion>3</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>21</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>ExePath</name>
|
||||||
|
<state>Full\Exe</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ObjPath</name>
|
||||||
|
<state>Full\Obj</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ListPath</name>
|
||||||
|
<state>Full\List</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Variant</name>
|
||||||
|
<version>19</version>
|
||||||
|
<state>37</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GEndianMode</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Input variant</name>
|
||||||
|
<version>3</version>
|
||||||
|
<state>3</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Input description</name>
|
||||||
|
<state>No specifier n, no float nor long long.</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Output variant</name>
|
||||||
|
<version>2</version>
|
||||||
|
<state>3</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Output description</name>
|
||||||
|
<state>No specifier a, A.</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GOutputBinary</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FPU</name>
|
||||||
|
<version>2</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OGCoreOrChip</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GRuntimeLibSelect</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GRuntimeLibSelectSlave</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>RTDescription</name>
|
||||||
|
<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OGProductVersion</name>
|
||||||
|
<state>5.50.5.51996</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OGLastSavedByProductVersion</name>
|
||||||
|
<state>6.20.1.52589</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GeneralEnableMisra</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GeneralMisraVerbose</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OGChipSelectEditMenu</name>
|
||||||
|
<state>MB9BF506N Fujitsu MB9BF506N</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GenLowLevelInterface</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GEndianModeBE</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OGBufferedTerminalOutput</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GenStdoutInterface</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GeneralMisraRules98</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GeneralMisraVer</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GeneralMisraRules04</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>RTConfigPath2</name>
|
||||||
|
<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GFPUCoreSlave</name>
|
||||||
|
<version>19</version>
|
||||||
|
<state>37</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GBECoreSlave</name>
|
||||||
|
<version>19</version>
|
||||||
|
<state>37</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OGUseCmsis</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OGUseCmsisDspLib</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>ICCARM</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>28</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>CCDefines</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPreprocFile</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPreprocComments</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPreprocLine</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCListCFile</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCListCMnemonics</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCListCMessages</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCListAssFile</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCListAssSource</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCEnableRemarks</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCDiagSuppress</name>
|
||||||
|
<state>Pa082</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCDiagRemark</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCDiagWarning</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCDiagError</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCObjPrefix</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCAllowList</name>
|
||||||
|
<version>1</version>
|
||||||
|
<state>0000000</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCDebugInfo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IEndianMode</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IProcessor</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IExtraOptionsCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IExtraOptions</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCLangConformance</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCSignedPlainChar</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRequirePrototypes</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCMultibyteSupport</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCDiagWarnAreErr</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCompilerRuntimeInfo</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IFpuProcessor</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OutputFile</name>
|
||||||
|
<state>$FILE_BNAME$.o</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCLibConfigHeader</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>PreInclude</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CompilerMisraOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCIncludePath2</name>
|
||||||
|
<state>$PROJ_DIR$/Fujitu_source</state>
|
||||||
|
<state>$PROJ_DIR$</state>
|
||||||
|
<state>$PROJ_DIR$/../../Source/include</state>
|
||||||
|
<state>$PROJ_DIR$/../../Source/portable/IAR/ARM_CM3</state>
|
||||||
|
<state>$PROJ_DIR$/../common/include</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCStdIncCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCCodeSection</name>
|
||||||
|
<state>.text</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IInterwork2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IProcessorMode2</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCOptLevel</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCOptStrategy</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCOptLevelSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CompilerMisraRules98</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CompilerMisraRules04</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPosIndRopi</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPosIndRwpi</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCPosIndNoDynInit</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IccLang</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IccCDialect</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IccAllowVLA</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IccCppDialect</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IccExceptions</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IccRTTI</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IccStaticDestr</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IccCppInlineSemantics</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IccCmsis</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IccFloatSemantics</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>AARM</name>
|
||||||
|
<archiveVersion>2</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>8</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>AObjPrefix</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AEndian</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ACaseSensitivity</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacroChars</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AWarnEnable</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AWarnWhat</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AWarnOne</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AWarnRange1</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AWarnRange2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ADebug</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AltRegisterNames</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ADefines</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AList</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AListHeader</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AListing</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Includes</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacDefs</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacExps</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacExec</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OnlyAssed</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MultiLine</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>PageLengthCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>PageLength</name>
|
||||||
|
<state>80</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TabSpacing</name>
|
||||||
|
<state>8</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AXRef</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AXRefDefines</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AXRefInternal</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AXRefDual</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AProcessor</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AFpuProcessor</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AOutputFile</name>
|
||||||
|
<state>$FILE_BNAME$.o</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AMultibyteSupport</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ALimitErrorsCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ALimitErrorsEdit</name>
|
||||||
|
<state>100</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AIgnoreStdInclude</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AUserIncludes</name>
|
||||||
|
<state>$PROJ_DIR$</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AExtraOptionsCheckV2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AExtraOptionsV2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>OBJCOPY</name>
|
||||||
|
<archiveVersion>0</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>1</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>OOCOutputFormat</name>
|
||||||
|
<version>2</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCOutputOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OOCOutputFile</name>
|
||||||
|
<state>RTOSDemo_IAR.srec</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OOCCommandLineProducer</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OOCObjCopyEnable</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>CUSTOM</name>
|
||||||
|
<archiveVersion>3</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<extensions></extensions>
|
||||||
|
<cmdline></cmdline>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>BICOMP</name>
|
||||||
|
<archiveVersion>0</archiveVersion>
|
||||||
|
<data/>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>BUILDACTION</name>
|
||||||
|
<archiveVersion>1</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<prebuild></prebuild>
|
||||||
|
<postbuild></postbuild>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>ILINK</name>
|
||||||
|
<archiveVersion>0</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>13</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>IlinkLibIOConfig</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>XLinkMisraHandler</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkInputFileSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkOutputFile</name>
|
||||||
|
<state>RTOSDemo_IAR.out</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkDebugInfoEnable</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkKeepSymbols</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkRawBinaryFile</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkRawBinarySymbol</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkRawBinarySegment</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkRawBinaryAlign</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkDefines</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkConfigDefines</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkMapFile</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkLogFile</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkLogInitialization</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkLogModule</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkLogSection</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkLogVeneer</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkIcfOverride</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkIcfFile</name>
|
||||||
|
<state>$PROJ_DIR$\config\MB9BF506.icf</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkIcfFileSlave</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkEnableRemarks</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkSuppressDiags</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkTreatAsRem</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkTreatAsWarn</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkTreatAsErr</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkWarningsAreErrors</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkUseExtraOptions</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkExtraOptions</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkLowLevelInterfaceSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkAutoLibEnable</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkAdditionalLibs</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkOverrideProgramEntryLabel</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkProgramEntryLabelSelect</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkProgramEntryLabel</name>
|
||||||
|
<state>__iar_program_start</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DoFill</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FillerByte</name>
|
||||||
|
<state>0xFF</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FillerStart</name>
|
||||||
|
<state>0x0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FillerEnd</name>
|
||||||
|
<state>0x0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CrcSize</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CrcAlign</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CrcAlgo</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CrcPoly</name>
|
||||||
|
<state>0x11021</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CrcCompl</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CrcBitOrder</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CrcInitialValue</name>
|
||||||
|
<state>0x0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DoCrc</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkBE8Slave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkBufferedTerminalOutput</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkStdoutInterfaceSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CrcFullSize</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkIElfToolPostProcess</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkLogAutoLibSelect</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkLogRedirSymbols</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkLogUnusedFragments</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkCrcReverseByteOrder</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkCrcUseAsInput</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkOptInline</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkOptExceptionsAllow</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkOptExceptionsForce</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkCmsis</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkOptMergeDuplSections</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkOptUseVfe</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IlinkOptForceVfe</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>IARCHIVE</name>
|
||||||
|
<archiveVersion>0</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>0</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>IarchiveInputs</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IarchiveOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IarchiveOutput</name>
|
||||||
|
<state>###Unitialized###</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>BILINK</name>
|
||||||
|
<archiveVersion>0</archiveVersion>
|
||||||
|
<data/>
|
||||||
|
</settings>
|
||||||
|
</configuration>
|
||||||
<group>
|
<group>
|
||||||
<name>Common_Demo_Source</name>
|
<name>Common_Demo_Source</name>
|
||||||
<excluded>
|
<excluded>
|
||||||
|
|
@ -982,6 +1880,9 @@
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\main_blinky.c</name>
|
<name>$PROJ_DIR$\main_blinky.c</name>
|
||||||
|
<excluded>
|
||||||
|
<configuration>Full</configuration>
|
||||||
|
</excluded>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\ParTest.c</name>
|
<name>$PROJ_DIR$\ParTest.c</name>
|
||||||
|
|
|
||||||
|
|
@ -102,11 +102,6 @@
|
||||||
* the Blocked state every 200 milliseconds, and therefore toggles the LED
|
* the Blocked state every 200 milliseconds, and therefore toggles the LED
|
||||||
* every 200 milliseconds.
|
* every 200 milliseconds.
|
||||||
*
|
*
|
||||||
* The Demo Specific OLED Task:
|
|
||||||
* The OLED task is a very simple task that just scrolls a message across the
|
|
||||||
* OLED. Ideally this would be done in a timer, but the OLED driver accesses
|
|
||||||
* the I2C which is time consuming.
|
|
||||||
*
|
|
||||||
* The Demo Specific LED Software Timer and the Button Interrupt:
|
* The Demo Specific LED Software Timer and the Button Interrupt:
|
||||||
* The user button SW1 is configured to generate an interrupt each time it is
|
* The user button SW1 is configured to generate an interrupt each time it is
|
||||||
* pressed. The interrupt service routine switches an LED on, and resets the
|
* pressed. The interrupt service routine switches an LED on, and resets the
|
||||||
|
|
@ -144,12 +139,9 @@
|
||||||
#include "queue.h"
|
#include "queue.h"
|
||||||
#include "timers.h"
|
#include "timers.h"
|
||||||
|
|
||||||
/* Microsemi drivers/libraries includes. */
|
/* Fujitsu drivers/libraries. */
|
||||||
#include "mss_gpio.h"
|
#include "mb9bf506n.h"
|
||||||
#include "mss_watchdog.h"
|
#include "system_mb9bf50x.h"
|
||||||
#include "mss_timer.h"
|
|
||||||
#include "mss_ace.h"
|
|
||||||
#include "oled.h"
|
|
||||||
|
|
||||||
/* Common demo includes. */
|
/* Common demo includes. */
|
||||||
#include "partest.h"
|
#include "partest.h"
|
||||||
|
|
@ -179,11 +171,13 @@ the queue empty. */
|
||||||
/* The LED toggled by the check timer callback function. */
|
/* The LED toggled by the check timer callback function. */
|
||||||
#define mainCHECK_LED 0x07UL
|
#define mainCHECK_LED 0x07UL
|
||||||
|
|
||||||
/* The LED turned on by the button interrupt, and turned off by the LED timer. */
|
|
||||||
#define mainTIMER_CONTROLLED_LED 0x06UL
|
|
||||||
|
|
||||||
/* The LED toggle by the queue receive task. */
|
/* The LED toggle by the queue receive task. */
|
||||||
#define mainTASK_CONTROLLED_LED 0x05UL
|
#define mainTASK_CONTROLLED_LED 0x8000UL
|
||||||
|
|
||||||
|
/* The LED turned on by the button interrupt, and turned off by the LED timer.
|
||||||
|
Although it looks like this value is the same as that defined for
|
||||||
|
mainTASK_CONTROLLED_LED, the two LEDs are on different ports. */
|
||||||
|
#define mainTIMER_CONTROLLED_LED 0x8000UL
|
||||||
|
|
||||||
/* Constant used by the standard timer test functions. */
|
/* Constant used by the standard timer test functions. */
|
||||||
#define mainTIMER_TEST_PERIOD ( 50 )
|
#define mainTIMER_TEST_PERIOD ( 50 )
|
||||||
|
|
@ -195,23 +189,13 @@ the queue empty. */
|
||||||
#define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
|
#define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
|
||||||
#define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
|
#define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
|
||||||
#define mainFLASH_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
|
#define mainFLASH_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
|
||||||
#define mainuIP_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 )
|
|
||||||
#define mainOLED_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
|
|
||||||
#define mainINTEGER_TASK_PRIORITY ( tskIDLE_PRIORITY )
|
#define mainINTEGER_TASK_PRIORITY ( tskIDLE_PRIORITY )
|
||||||
#define mainGEN_QUEUE_TASK_PRIORITY ( tskIDLE_PRIORITY )
|
#define mainGEN_QUEUE_TASK_PRIORITY ( tskIDLE_PRIORITY )
|
||||||
|
|
||||||
/* The WEB server uses string handling functions, which in turn use a bit more
|
|
||||||
stack than most of the other tasks. */
|
|
||||||
#define mainuIP_STACK_SIZE ( configMINIMAL_STACK_SIZE * 3 )
|
|
||||||
|
|
||||||
/* The period at which the check timer will expire, in ms, provided no errors
|
/* The period at which the check timer will expire, in ms, provided no errors
|
||||||
have been reported by any of the standard demo tasks. */
|
have been reported by any of the standard demo tasks. */
|
||||||
#define mainCHECK_TIMER_PERIOD_MS ( 3000UL / portTICK_RATE_MS )
|
#define mainCHECK_TIMER_PERIOD_MS ( 3000UL / portTICK_RATE_MS )
|
||||||
|
|
||||||
/* The period at which the OLED timer will expire. Each time it expires, it's
|
|
||||||
callback function updates the OLED text. */
|
|
||||||
#define mainOLED_PERIOD_MS ( 75UL / portTICK_RATE_MS )
|
|
||||||
|
|
||||||
/* The period at which the check timer will expire, in ms, if an error has been
|
/* The period at which the check timer will expire, in ms, if an error has been
|
||||||
reported in one of the standard demo tasks. */
|
reported in one of the standard demo tasks. */
|
||||||
#define mainERROR_CHECK_TIMER_PERIOD_MS ( 500UL / portTICK_RATE_MS )
|
#define mainERROR_CHECK_TIMER_PERIOD_MS ( 500UL / portTICK_RATE_MS )
|
||||||
|
|
@ -252,18 +236,6 @@ static void prvCheckTimerCallback( xTimerHandle xTimer );
|
||||||
*/
|
*/
|
||||||
void vParTestSetLEDFromISR( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue );
|
void vParTestSetLEDFromISR( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue );
|
||||||
|
|
||||||
/*
|
|
||||||
* Contains the implementation of the WEB server.
|
|
||||||
*/
|
|
||||||
extern void vuIP_Task( void *pvParameters );
|
|
||||||
|
|
||||||
/*
|
|
||||||
* A very simply task that does nothing but scroll the OLED display. Ideally
|
|
||||||
* this would be done within a timer, but it accesses the I2C port which is
|
|
||||||
* time consuming.
|
|
||||||
*/
|
|
||||||
static void prvOLEDTask( void * pvParameters);
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------*/
|
/*-----------------------------------------------------------*/
|
||||||
|
|
||||||
/* The queue used by both application specific demo tasks defined in this file. */
|
/* The queue used by both application specific demo tasks defined in this file. */
|
||||||
|
|
@ -277,9 +249,9 @@ static xTimerHandle xLEDTimer = NULL;
|
||||||
function. */
|
function. */
|
||||||
static xTimerHandle xCheckTimer = NULL;
|
static xTimerHandle xCheckTimer = NULL;
|
||||||
|
|
||||||
/* The status message that is displayed at the bottom of the "task stats" web
|
/* If an error is detected in a standard demo task, then pcStatusMessage will
|
||||||
page, which is served by the uIP task. This will report any errors picked up
|
be set to point to a string that identifies the offending task. This is just
|
||||||
by the check timer callback. */
|
to make debugging easier. */
|
||||||
static const char *pcStatusMessage = NULL;
|
static const char *pcStatusMessage = NULL;
|
||||||
|
|
||||||
/*-----------------------------------------------------------*/
|
/*-----------------------------------------------------------*/
|
||||||
|
|
@ -298,7 +270,6 @@ int main(void)
|
||||||
comments at the top of this file. */
|
comments at the top of this file. */
|
||||||
xTaskCreate( prvQueueReceiveTask, ( signed char * ) "Rx", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_RECEIVE_TASK_PRIORITY, NULL );
|
xTaskCreate( prvQueueReceiveTask, ( signed char * ) "Rx", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_RECEIVE_TASK_PRIORITY, NULL );
|
||||||
xTaskCreate( prvQueueSendTask, ( signed char * ) "TX", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_SEND_TASK_PRIORITY, NULL );
|
xTaskCreate( prvQueueSendTask, ( signed char * ) "TX", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_SEND_TASK_PRIORITY, NULL );
|
||||||
xTaskCreate( prvOLEDTask, ( signed char * ) "OLED", configMINIMAL_STACK_SIZE, NULL, mainOLED_TASK_PRIORITY, NULL );
|
|
||||||
|
|
||||||
/* Create the software timer that is responsible for turning off the LED
|
/* Create the software timer that is responsible for turning off the LED
|
||||||
if the button is not pushed within 5000ms, as described at the top of
|
if the button is not pushed within 5000ms, as described at the top of
|
||||||
|
|
@ -329,9 +300,6 @@ int main(void)
|
||||||
vStartRecursiveMutexTasks();
|
vStartRecursiveMutexTasks();
|
||||||
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
|
vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
|
||||||
|
|
||||||
/* Create the web server task. */
|
|
||||||
xTaskCreate( vuIP_Task, ( signed char * ) "uIP", mainuIP_STACK_SIZE, NULL, mainuIP_TASK_PRIORITY, NULL );
|
|
||||||
|
|
||||||
/* The suicide tasks must be created last, as they need to know how many
|
/* The suicide tasks must be created last, as they need to know how many
|
||||||
tasks were running prior to their creation in order to ascertain whether
|
tasks were running prior to their creation in order to ascertain whether
|
||||||
or not the correct/expected number of tasks are running at any given
|
or not the correct/expected number of tasks are running at any given
|
||||||
|
|
@ -417,28 +385,35 @@ static void prvCheckTimerCallback( xTimerHandle xTimer )
|
||||||
static void prvLEDTimerCallback( xTimerHandle xTimer )
|
static void prvLEDTimerCallback( xTimerHandle xTimer )
|
||||||
{
|
{
|
||||||
/* The timer has expired - so no button pushes have occurred in the last
|
/* The timer has expired - so no button pushes have occurred in the last
|
||||||
five seconds - turn the LED off. */
|
five seconds - turn the LED off. NOTE - accessing the LED port should use
|
||||||
vParTestSetLED( mainTIMER_CONTROLLED_LED, pdFALSE );
|
a critical section because it is accessed from multiple tasks, and the
|
||||||
|
button interrupt - in this trivial case, for simplicity, the critical
|
||||||
|
section is omitted.
|
||||||
|
|
||||||
|
A ParTest function is not used to set the LED as the LED is not on the seven
|
||||||
|
segment display that the ParTest functions control. */
|
||||||
|
FM3_GPIO->PDOR1 |= mainTIMER_CONTROLLED_LED;
|
||||||
}
|
}
|
||||||
/*-----------------------------------------------------------*/
|
/*-----------------------------------------------------------*/
|
||||||
|
|
||||||
/* The ISR executed when the user button is pushed. */
|
/* The ISR executed when the user button is pushed. */
|
||||||
void GPIO8_IRQHandler( void )
|
void INT0_7_Handler( void )
|
||||||
{
|
{
|
||||||
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
|
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
|
||||||
|
|
||||||
/* The button was pushed, so ensure the LED is on before resetting the
|
/* The button was pushed, so ensure the LED is on before resetting the
|
||||||
LED timer. The LED timer will turn the LED off if the button is not
|
LED timer. The LED timer will turn the LED off if the button is not
|
||||||
pushed within 5000ms. */
|
pushed within 5000ms. */
|
||||||
vParTestSetLEDFromISR( mainTIMER_CONTROLLED_LED, pdTRUE );
|
FM3_GPIO->PDOR1 &= ~mainTIMER_CONTROLLED_LED;
|
||||||
|
|
||||||
/* This interrupt safe FreeRTOS function can be called from this interrupt
|
/* This interrupt safe FreeRTOS function can be called from this interrupt
|
||||||
because the interrupt priority is below the
|
because the interrupt priority is below the
|
||||||
configMAX_SYSCALL_INTERRUPT_PRIORITY setting in FreeRTOSConfig.h. */
|
configMAX_SYSCALL_INTERRUPT_PRIORITY setting in FreeRTOSConfig.h. */
|
||||||
xTimerResetFromISR( xLEDTimer, &xHigherPriorityTaskWoken );
|
xTimerResetFromISR( xLEDTimer, &xHigherPriorityTaskWoken );
|
||||||
|
|
||||||
/* Clear the interrupt before leaving. */
|
/* Clear the interrupt before leaving. This just clears all the interrupts
|
||||||
MSS_GPIO_clear_irq( MSS_GPIO_8 );
|
for simplicity, as only one is actually used in this simple demo anyway. */
|
||||||
|
FM3_EXTI->EICL = 0x0000;
|
||||||
|
|
||||||
/* If calling xTimerResetFromISR() caused a task (in this case the timer
|
/* If calling xTimerResetFromISR() caused a task (in this case the timer
|
||||||
service/daemon task) to unblock, and the unblocked task has a priority
|
service/daemon task) to unblock, and the unblocked task has a priority
|
||||||
|
|
@ -456,7 +431,7 @@ const unsigned long ulValueToSend = 100UL;
|
||||||
|
|
||||||
/* The timer command queue will have been filled when the timer test tasks
|
/* The timer command queue will have been filled when the timer test tasks
|
||||||
were created in main() (this is part of the test they perform). Therefore,
|
were created in main() (this is part of the test they perform). Therefore,
|
||||||
while the check and OLED timers can be created in main(), they cannot be
|
while the check and count timers can be created in main(), they cannot be
|
||||||
started from main(). Once the scheduler has started, the timer service
|
started from main(). Once the scheduler has started, the timer service
|
||||||
task will drain the command queue, and now the check and OLED timers can be
|
task will drain the command queue, and now the check and OLED timers can be
|
||||||
started successfully. */
|
started successfully. */
|
||||||
|
|
@ -503,64 +478,35 @@ unsigned long ulReceivedValue;
|
||||||
}
|
}
|
||||||
/*-----------------------------------------------------------*/
|
/*-----------------------------------------------------------*/
|
||||||
|
|
||||||
static void prvOLEDTask( void * pvParameters)
|
|
||||||
{
|
|
||||||
static struct oled_data xOLEDData;
|
|
||||||
static unsigned char ucOffset1 = 0, ucOffset2 = 5;
|
|
||||||
static portTickType xLastScrollTime = 0UL;
|
|
||||||
|
|
||||||
/* Initialise the display. */
|
|
||||||
OLED_init();
|
|
||||||
|
|
||||||
/* Initialise the parts of the oled_data structure that do not change. */
|
|
||||||
xOLEDData.line1 = FIRST_LINE;
|
|
||||||
xOLEDData.string1 = " www.FreeRTOS.org";
|
|
||||||
xOLEDData.line2 = SECOND_LINE;
|
|
||||||
xOLEDData.string2 = " www.FreeRTOS.org";
|
|
||||||
xOLEDData.contrast_val = OLED_CONTRAST_VAL;
|
|
||||||
xOLEDData.on_off = OLED_HORIZ_SCROLL_OFF;
|
|
||||||
xOLEDData.column_scrool_per_step = OLED_HORIZ_SCROLL_STEP;
|
|
||||||
xOLEDData.start_page = OLED_START_PAGE;
|
|
||||||
xOLEDData.time_intrval_btw_scroll_step = OLED_HORIZ_SCROLL_TINVL;
|
|
||||||
xOLEDData.end_page = OLED_END_PAGE;
|
|
||||||
|
|
||||||
|
|
||||||
/* Initialise the last scroll time. This only needs to be done once,
|
|
||||||
because from this point on it will get automatically updated in the
|
|
||||||
xTaskDelayUntil() API function. */
|
|
||||||
xLastScrollTime = xTaskGetTickCount();
|
|
||||||
|
|
||||||
for( ;; )
|
|
||||||
{
|
|
||||||
/* Wait until it is time to update the OLED again. */
|
|
||||||
vTaskDelayUntil( &xLastScrollTime, mainOLED_PERIOD_MS );
|
|
||||||
|
|
||||||
xOLEDData.char_offset1 = ucOffset1++;
|
|
||||||
xOLEDData.char_offset2 = ucOffset2++;
|
|
||||||
|
|
||||||
OLED_write_data( &xOLEDData, BOTH_LINES );
|
|
||||||
}
|
|
||||||
}
|
|
||||||
/*-----------------------------------------------------------*/
|
|
||||||
|
|
||||||
static void prvSetupHardware( void )
|
static void prvSetupHardware( void )
|
||||||
{
|
{
|
||||||
|
const unsigned short usButtonInputBit = 0x01U;
|
||||||
|
|
||||||
|
SystemInit();
|
||||||
SystemCoreClockUpdate();
|
SystemCoreClockUpdate();
|
||||||
|
|
||||||
/* Disable the Watch Dog Timer */
|
/* Initialise the IO used for the LEDs on the 7 segment displays. */
|
||||||
MSS_WD_disable( );
|
|
||||||
|
|
||||||
/* Configure the GPIO for the LEDs. */
|
|
||||||
vParTestInitialise();
|
vParTestInitialise();
|
||||||
|
|
||||||
/* ACE Initialization */
|
/* Set the switches to input (P18->P1F). */
|
||||||
ACE_init();
|
FM3_GPIO->DDR5 = 0x0000;
|
||||||
|
FM3_GPIO->PFR5 = 0x0000;
|
||||||
|
|
||||||
|
/* Assign the button input as GPIO. */
|
||||||
|
FM3_GPIO->PFR1 |= usButtonInputBit;
|
||||||
|
|
||||||
|
/* Button interrupt on falling edge. */
|
||||||
|
FM3_EXTI->ELVR = 0x0003;
|
||||||
|
|
||||||
|
/* Clear all external interrupts. */
|
||||||
|
FM3_EXTI->EICL = 0x0000;
|
||||||
|
|
||||||
|
/* Enable the button interrupt. */
|
||||||
|
FM3_EXTI->ENIR |= usButtonInputBit;
|
||||||
|
|
||||||
/* Setup the GPIO and the NVIC for the switch used in this simple demo. */
|
/* Setup the GPIO and the NVIC for the switch used in this simple demo. */
|
||||||
NVIC_SetPriority( GPIO8_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
NVIC_SetPriority( EXINT0_7_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
||||||
NVIC_EnableIRQ( GPIO8_IRQn );
|
NVIC_EnableIRQ( EXINT0_7_IRQn );
|
||||||
MSS_GPIO_config( MSS_GPIO_8, MSS_GPIO_INPUT_MODE | MSS_GPIO_IRQ_EDGE_NEGATIVE );
|
|
||||||
MSS_GPIO_enable_irq( MSS_GPIO_8 );
|
|
||||||
}
|
}
|
||||||
/*-----------------------------------------------------------*/
|
/*-----------------------------------------------------------*/
|
||||||
|
|
||||||
|
|
@ -623,34 +569,3 @@ char *pcGetTaskStatusMessage( void )
|
||||||
}
|
}
|
||||||
/*-----------------------------------------------------------*/
|
/*-----------------------------------------------------------*/
|
||||||
|
|
||||||
void vMainConfigureTimerForRunTimeStats( void )
|
|
||||||
{
|
|
||||||
const unsigned long ulMax32BitValue = 0xffffffffUL;
|
|
||||||
|
|
||||||
MSS_TIM64_init( MSS_TIMER_PERIODIC_MODE );
|
|
||||||
MSS_TIM64_load_immediate( ulMax32BitValue, ulMax32BitValue );
|
|
||||||
MSS_TIM64_start();
|
|
||||||
}
|
|
||||||
/*-----------------------------------------------------------*/
|
|
||||||
|
|
||||||
unsigned long ulGetRunTimeCounterValue( void )
|
|
||||||
{
|
|
||||||
unsigned long long ullCurrentValue;
|
|
||||||
const unsigned long long ulMax64BitValue = 0xffffffffffffffffULL;
|
|
||||||
unsigned long *pulHighWord, *pulLowWord;
|
|
||||||
|
|
||||||
pulHighWord = ( unsigned long * ) &ullCurrentValue;
|
|
||||||
pulLowWord = pulHighWord++;
|
|
||||||
|
|
||||||
MSS_TIM64_get_current_value( ( uint32_t * ) pulHighWord, ( uint32_t * ) pulLowWord );
|
|
||||||
|
|
||||||
/* Convert the down count into an upcount. */
|
|
||||||
ullCurrentValue = ulMax64BitValue - ullCurrentValue;
|
|
||||||
|
|
||||||
/* Scale to a 32bit number of suitable frequency. */
|
|
||||||
ullCurrentValue >>= 13;
|
|
||||||
|
|
||||||
/* Just return 32 bits. */
|
|
||||||
return ( unsigned long ) ullCurrentValue;
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue