diff --git a/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/.cproject b/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/.cproject
index f6753354b..113fca4bf 100644
--- a/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/.cproject
+++ b/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/.cproject
@@ -20,53 +20,59 @@
-
+
-
+
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
-
+
@@ -74,22 +80,22 @@
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
-
+
-
-
+
+
@@ -729,53 +735,53 @@
-
+
-
+
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
-
+
@@ -783,22 +789,22 @@
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
-
+
-
-
+
+
diff --git a/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/CreateProjectDirectoryStructure.bat b/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/CreateProjectDirectoryStructure.bat
new file mode 100644
index 000000000..62a02d304
--- /dev/null
+++ b/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/CreateProjectDirectoryStructure.bat
@@ -0,0 +1,55 @@
+REM This file should be executed from the command line prior to the first
+REM build. It will be necessary to refresh the Eclipse project once the
+REM .bat file has been executed (normally just press F5 to refresh).
+
+REM Copies all the required files from their location within the standard
+REM FreeRTOS directory structure to under the Eclipse project directory.
+REM This permits the Eclipse project to be used in 'managed' mode and without
+REM having to setup any linked resources.
+
+REM Have the files already been copied?
+IF EXIST FreeRTOS_Source Goto END
+
+ REM Create the required directory structure.
+ MD FreeRTOS_Source
+ MD FreeRTOS_Source\include
+ MD FreeRTOS_Source\portable\GCC
+ MD FreeRTOS_Source\portable\GCC\MicroBlaze
+ MD FreeRTOS_Source\portable\MemMang
+ MD Demo_Source\Common_Demo_Files
+ MD Demo_Source\Common_Demo_Files\include
+
+ REM Copy the core kernel files.
+ copy ..\..\..\..\Source\tasks.c FreeRTOS_Source
+ copy ..\..\..\..\Source\queue.c FreeRTOS_Source
+ copy ..\..\..\..\Source\list.c FreeRTOS_Source
+ copy ..\..\..\..\Source\timers.c FreeRTOS_Source
+
+ REM Copy the common header files
+
+ copy ..\..\..\..\Source\include\*.* FreeRTOS_Source\include
+
+ REM Copy the portable layer files
+ copy ..\..\..\..\Source\portable\GCC\MicroBlaze\*.* FreeRTOS_Source\portable\GCC\MicroBlaze
+
+ REM Copy the basic memory allocation files
+ copy ..\..\..\..\Source\portable\MemMang\heap_2.c FreeRTOS_Source\portable\MemMang
+
+ REM Copy the files that define the common demo tasks.
+ copy ..\Common\minimal\dynamic.c Demo_Source\Common_Demo_Files
+ copy ..\Common\minimal\comtest.c Demo_Source\Common_Demo_Files
+ copy ..\Common\minimal\GenQTest.c Demo_Source\Common_Demo_Files
+ copy ..\Common\minimal\TimerDemo.c Demo_Source\Common_Demo_Files
+ copy ..\Common\minimal\countsem.c Demo_Source\Common_Demo_Files
+
+ REM Copy the common demo file headers.
+ copy ..\Common\include\dynamic.h Demo_Source\Common_Demo_Files\include
+ copy ..\Common\include\comtest.h Demo_Source\Common_Demo_Files\include
+ copy ..\Common\include\comtest2.h Demo_Source\Common_Demo_Files\include
+ copy ..\Common\include\GenQTest.h Demo_Source\Common_Demo_Files\include
+ copy ..\Common\include\serial.h Demo_Source\Common_Demo_Files\include
+ copy ..\Common\include\partest.h Demo_Source\Common_Demo_Files\include
+ copy ..\Common\include\TimerDemo.h Demo_Source\Common_Demo_Files\include
+ copy ..\Common\include\countsem.h Demo_Source\Common_Demo_Files\include
+
+: END
diff --git a/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/FreeRTOSConfig.h b/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/FreeRTOSConfig.h
new file mode 100644
index 000000000..43e1cd6e9
--- /dev/null
+++ b/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/FreeRTOSConfig.h
@@ -0,0 +1,122 @@
+/*
+ FreeRTOS V7.0.1 - Copyright (C) 2011 Real Time Engineers Ltd.
+
+
+ ***************************************************************************
+ * *
+ * FreeRTOS tutorial books are available in pdf and paperback. *
+ * Complete, revised, and edited pdf reference manuals are also *
+ * available. *
+ * *
+ * Purchasing FreeRTOS documentation will not only help you, by *
+ * ensuring you get running as quickly as possible and with an *
+ * in-depth knowledge of how to use FreeRTOS, it will also help *
+ * the FreeRTOS project to continue with its mission of providing *
+ * professional grade, cross platform, de facto standard solutions *
+ * for microcontrollers - completely free of charge! *
+ * *
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *
+ * *
+ * Thank you for using FreeRTOS, and thank you for your support! *
+ * *
+ ***************************************************************************
+
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ >>>NOTE<<< The modification to the GPL is included to allow you to
+ distribute a combined work that includes FreeRTOS without being obliged to
+ provide the source code for proprietary components outside of the FreeRTOS
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+
+/* The following #error directive is to remind users that a batch file must be
+ * executed prior to this project being built. The batch file *cannot* be
+ * executed from within CCS4! Once it has been executed, re-open or refresh
+ * the CCS4 project and remove the #error line below.
+ */
+//#error Ensure CreateProjectDirectoryStructure.bat has been executed before building. See comment immediately above.
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+#define configUSE_PREEMPTION 1
+#define configUSE_IDLE_HOOK 1
+#define configUSE_TICK_HOOK 0
+#define configCPU_CLOCK_HZ ( 100000000UL )
+#define configTICK_RATE_HZ ( ( portTickType ) 1000 )
+#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 5 )
+#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 10 * 1024 ) )
+#define configMAX_TASK_NAME_LEN ( 10 )
+#define configUSE_TRACE_FACILITY 0
+#define configUSE_16_BIT_TICKS 1
+#define configIDLE_SHOULD_YIELD 1
+#define configUSE_MUTEXES 1
+#define configQUEUE_REGISTRY_SIZE 0
+#define configGENERATE_RUN_TIME_STATS 0
+#define configCHECK_FOR_STACK_OVERFLOW 2
+#define configUSE_RECURSIVE_MUTEXES 1
+#define configUSE_MALLOC_FAILED_HOOK 1
+#define configUSE_APPLICATION_TASK_TAG 0
+#define configUSE_COUNTING_SEMAPHORES 1
+#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 80 )
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES 0
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+/* Software timer definitions. */
+#define configUSE_TIMERS 1
+#define configTIMER_TASK_PRIORITY ( 3 )
+#define configTIMER_QUEUE_LENGTH 10
+#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE )
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+#define INCLUDE_vTaskPrioritySet 1
+#define INCLUDE_uxTaskPriorityGet 1
+#define INCLUDE_vTaskDelete 0
+#define INCLUDE_vTaskCleanUpResources 0
+#define INCLUDE_vTaskSuspend 1
+#define INCLUDE_vTaskDelayUntil 1
+#define INCLUDE_vTaskDelay 1
+
+#define configASSERT( x ) if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); for( ;; ); }
+
+#endif /* FREERTOS_CONFIG_H */
+
diff --git a/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/main-blinky.c b/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/main-blinky.c
new file mode 100644
index 000000000..0ec8afee8
--- /dev/null
+++ b/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/main-blinky.c
@@ -0,0 +1,376 @@
+/*
+ FreeRTOS V7.0.1 - Copyright (C) 2011 Real Time Engineers Ltd.
+
+
+ FreeRTOS supports many tools and architectures. V7.0.0 is sponsored by:
+ Atollic AB - Atollic provides professional embedded systems development
+ tools for C/C++ development, code analysis and test automation.
+ See http://www.atollic.com
+
+
+ ***************************************************************************
+ * *
+ * FreeRTOS tutorial books are available in pdf and paperback. *
+ * Complete, revised, and edited pdf reference manuals are also *
+ * available. *
+ * *
+ * Purchasing FreeRTOS documentation will not only help you, by *
+ * ensuring you get running as quickly as possible and with an *
+ * in-depth knowledge of how to use FreeRTOS, it will also help *
+ * the FreeRTOS project to continue with its mission of providing *
+ * professional grade, cross platform, de facto standard solutions *
+ * for microcontrollers - completely free of charge! *
+ * *
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *
+ * *
+ * Thank you for using FreeRTOS, and thank you for your support! *
+ * *
+ ***************************************************************************
+
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ >>>NOTE<<< The modification to the GPL is included to allow you to
+ distribute a combined work that includes FreeRTOS without being obliged to
+ provide the source code for proprietary components outside of the FreeRTOS
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ * main-blinky.c is included when the "Blinky" build configuration is used.
+ * main-full.c is included when the "Full" build configuration is used.
+ *
+ * main-blinky.c (this file) defines a very simple demo that creates two tasks,
+ * one queue, and one timer. It also demonstrates how MicroBlaze interrupts
+ * can interact with FreeRTOS tasks/timers.
+ *
+ * This simple demo project runs on the Spartan-6 SP605 development board.
+ *
+ * The idle hook function:
+ * The idle hook function demonstrates how to query the amount of FreeRTOS heap
+ * space that is remaining (see vApplicationIdleHook() defined in this file).
+ *
+ * The main() Function:
+ * main() creates one software timer, one queue, and two tasks. It then starts
+ * the scheduler.
+ *
+ * The Queue Send Task:
+ * The queue send task is implemented by the prvQueueSendTask() function in
+ * this file. prvQueueSendTask() sits in a loop that causes it to repeatedly
+ * block for 200 milliseconds, before sending the value 100 to the queue that
+ * was created within main(). Once the value is sent, the task loops back
+ * around to block for another 200 milliseconds.
+ *
+ * The Queue Receive Task:
+ * The queue receive task is implemented by the prvQueueReceiveTask() function
+ * in this file. prvQueueReceiveTask() sits in a loop that causes it to
+ * repeatedly attempt to read data from the queue that was created within
+ * main(). When data is received, the task checks the value of the data, and
+ * if the value equals the expected 100, toggles the green LED. The 'block
+ * time' parameter passed to the queue receive function specifies that the task
+ * should be held in the Blocked state indefinitely to wait for data to be
+ * available on the queue. The queue receive task will only leave the Blocked
+ * state when the queue send task writes to the queue. As the queue send task
+ * writes to the queue every 200 milliseconds, the queue receive task leaves
+ * the Blocked state every 200 milliseconds, and therefore toggles the LED
+ * every 200 milliseconds.
+ *
+ * The LED Software Timer and the Button Interrupt:
+ * The user button SW1 is configured to generate an interrupt each time it is
+ * pressed. The interrupt service routine switches an LED on, and resets the
+ * LED software timer. The LED timer has a 5000 millisecond (5 second) period,
+ * and uses a callback function that is defined to just turn the LED off again.
+ * Therefore, pressing the user button will turn the LED on, and the LED will
+ * remain on until a full five seconds pass without the button being pressed.
+ */
+
+/* Kernel includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "timers.h"
+
+/* BSP includes. */
+#include "xenv_standalone.h"
+
+/* Priorities at which the tasks are created. */
+#define mainQUEUE_RECEIVE_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 )
+#define mainQUEUE_SEND_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
+
+/* The rate at which data is sent to the queue, specified in milliseconds, and
+converted to ticks using the portTICK_RATE_MS constant. */
+#define mainQUEUE_SEND_FREQUENCY_MS ( 200 / portTICK_RATE_MS )
+
+/* The number of items the queue can hold. This is 1 as the receive task
+will remove items as they are added, meaning the send task should always find
+the queue empty. */
+#define mainQUEUE_LENGTH ( 1 )
+
+/* The LED toggle by the queue receive task. */
+#define mainTASK_CONTROLLED_LED 0x01UL
+
+/* The LED turned on by the button interrupt, and turned off by the LED timer. */
+#define mainTIMER_CONTROLLED_LED 0x02UL
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Setup the NVIC, LED outputs, and button inputs.
+ */
+static void prvSetupHardware( void );
+
+/*
+ * The tasks as described in the comments at the top of this file.
+ */
+static void prvQueueReceiveTask( void *pvParameters );
+static void prvQueueSendTask( void *pvParameters );
+
+/*
+ * The LED timer callback function. This does nothing but switch off the
+ * LED defined by the mainTIMER_CONTROLLED_LED constant.
+ */
+static void vLEDTimerCallback( xTimerHandle xTimer );
+
+/*-----------------------------------------------------------*/
+
+/* The queue used by both tasks. */
+static xQueueHandle xQueue = NULL;
+
+/* The LED software timer. This uses vLEDTimerCallback() as its callback
+function. */
+static xTimerHandle xLEDTimer = NULL;
+
+/* Maintains the current LED output state. */
+static volatile unsigned long ulGPIOState = 0UL;
+
+/*-----------------------------------------------------------*/
+
+int main(void)
+{
+ /* Configure the NVIC, LED outputs and button inputs. */
+ prvSetupHardware();
+
+ /* Create the queue. */
+ xQueue = xQueueCreate( mainQUEUE_LENGTH, sizeof( unsigned long ) );
+
+ if( xQueue != NULL )
+ {
+ /* Start the two tasks as described in the comments at the top of this
+ file. */
+ xTaskCreate( prvQueueReceiveTask, ( signed char * ) "Rx", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_RECEIVE_TASK_PRIORITY, NULL );
+ xTaskCreate( prvQueueSendTask, ( signed char * ) "TX", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_SEND_TASK_PRIORITY, NULL );
+
+ /* Create the software timer that is responsible for turning off the LED
+ if the button is not pushed within 5000ms, as described at the top of
+ this file. */
+ xLEDTimer = xTimerCreate( ( const signed char * ) "LEDTimer", /* A text name, purely to help debugging. */
+ ( 5000 / portTICK_RATE_MS ), /* The timer period, in this case 5000ms (5s). */
+ pdFALSE, /* This is a one shot timer, so xAutoReload is set to pdFALSE. */
+ ( void * ) 0, /* The ID is not used, so can be set to anything. */
+ vLEDTimerCallback /* The callback function that switches the LED off. */
+ );
+
+ /* Start the tasks and timer running. */
+ vTaskStartScheduler();
+ }
+
+ /* If all is well, the scheduler will now be running, and the following line
+ will never be reached. If the following line does execute, then there was
+ insufficient FreeRTOS heap memory available for the idle and/or timer tasks
+ to be created. See the memory management section on the FreeRTOS web site
+ for more details. */
+ for( ;; );
+}
+/*-----------------------------------------------------------*/
+
+static void vLEDTimerCallback( xTimerHandle xTimer )
+{
+ /* The timer has expired - so no button pushes have occurred in the last
+ five seconds - turn the LED off. NOTE - accessing the LED port should use
+ a critical section because it is accessed from multiple tasks, and the
+ button interrupt - in this trivial case, for simplicity, the critical
+ section is omitted. */
+ ulGPIOState |= mainTIMER_CONTROLLED_LED;
+//_RB_ MSS_GPIO_set_outputs( ulGPIOState );
+}
+/*-----------------------------------------------------------*/
+
+/* The ISR executed when the user button is pushed. */
+void GPIO8_IRQHandler( void )
+{
+portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
+
+ /* The button was pushed, so ensure the LED is on before resetting the
+ LED timer. The LED timer will turn the LED off if the button is not
+ pushed within 5000ms. */
+ ulGPIOState &= ~mainTIMER_CONTROLLED_LED;
+//_RB_ MSS_GPIO_set_outputs( ulGPIOState );
+
+ /* This interrupt safe FreeRTOS function can be called from this interrupt
+ because the interrupt priority is below the
+ configMAX_SYSCALL_INTERRUPT_PRIORITY setting in FreeRTOSConfig.h. */
+ xTimerResetFromISR( xLEDTimer, &xHigherPriorityTaskWoken );
+
+ /* Clear the interrupt before leaving. */
+//_RB_ MSS_GPIO_clear_irq( MSS_GPIO_8 );
+
+ /* If calling xTimerResetFromISR() caused a task (in this case the timer
+ service/daemon task) to unblock, and the unblocked task has a priority
+ higher than or equal to the task that was interrupted, then
+ xHigherPriorityTaskWoken will now be set to pdTRUE, and calling
+ portEND_SWITCHING_ISR() will ensure the unblocked task runs next. */
+ portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+}
+/*-----------------------------------------------------------*/
+
+static void prvQueueSendTask( void *pvParameters )
+{
+portTickType xNextWakeTime;
+const unsigned long ulValueToSend = 100UL;
+
+ /* Initialise xNextWakeTime - this only needs to be done once. */
+ xNextWakeTime = xTaskGetTickCount();
+
+ for( ;; )
+ {
+ /* Place this task in the blocked state until it is time to run again.
+ The block time is specified in ticks, the constant used converts ticks
+ to ms. While in the Blocked state this task will not consume any CPU
+ time. */
+ vTaskDelayUntil( &xNextWakeTime, mainQUEUE_SEND_FREQUENCY_MS );
+
+ /* Send to the queue - causing the queue receive task to unblock and
+ toggle an LED. 0 is used as the block time so the sending operation
+ will not block - it shouldn't need to block as the queue should always
+ be empty at this point in the code. */
+ xQueueSend( xQueue, &ulValueToSend, 0 );
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvQueueReceiveTask( void *pvParameters )
+{
+unsigned long ulReceivedValue;
+
+ for( ;; )
+ {
+ /* Wait until something arrives in the queue - this task will block
+ indefinitely provided INCLUDE_vTaskSuspend is set to 1 in
+ FreeRTOSConfig.h. */
+ xQueueReceive( xQueue, &ulReceivedValue, portMAX_DELAY );
+
+ /* To get here something must have been received from the queue, but
+ is it the expected value? If it is, toggle the green LED. */
+ if( ulReceivedValue == 100UL )
+ {
+ /* NOTE - accessing the LED port should use a critical section
+ because it is accessed from multiple tasks, and the button interrupt
+ - in this trivial case, for simplicity, the critical section is
+ omitted. */
+ if( ( ulGPIOState & mainTASK_CONTROLLED_LED ) != 0 )
+ {
+ ulGPIOState &= ~mainTASK_CONTROLLED_LED;
+ }
+ else
+ {
+ ulGPIOState |= mainTASK_CONTROLLED_LED;
+ }
+//_RB_ MSS_GPIO_set_outputs( ulGPIOState );
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvSetupHardware( void )
+{
+ XCACHE_ENABLE_ICACHE();
+ XCACHE_ENABLE_DCACHE();
+}
+/*-----------------------------------------------------------*/
+
+void vApplicationMallocFailedHook( void )
+{
+ /* Called if a call to pvPortMalloc() fails because there is insufficient
+ free memory available in the FreeRTOS heap. pvPortMalloc() is called
+ internally by FreeRTOS API functions that create tasks, queues, software
+ timers, and semaphores. The size of the FreeRTOS heap is set by the
+ configTOTAL_HEAP_SIZE configuration constant in FreeRTOSConfig.h. */
+ for( ;; );
+}
+/*-----------------------------------------------------------*/
+
+void vApplicationStackOverflowHook( xTaskHandle *pxTask, signed char *pcTaskName )
+{
+ ( void ) pcTaskName;
+ ( void ) pxTask;
+
+ /* Run time stack overflow checking is performed if
+ configconfigCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook
+ function is called if a stack overflow is detected. */
+ for( ;; );
+}
+/*-----------------------------------------------------------*/
+
+void vApplicationIdleHook( void )
+{
+volatile size_t xFreeHeapSpace;
+
+ /* This function is called on each cycle of the idle task. In this case it
+ does nothing useful, other than report the amout of FreeRTOS heap that
+ remains unallocated. */
+ xFreeHeapSpace = xPortGetFreeHeapSize();
+
+ if( xFreeHeapSpace > 100 )
+ {
+ /* By now, the kernel has allocated everything it is going to, so
+ if there is a lot of heap remaining unallocated then
+ the value of configTOTAL_HEAP_SIZE in FreeRTOSConfig.h can be
+ reduced accordingly. */
+ }
+}
+/*-----------------------------------------------------------*/
+
+void vMainConfigureTimerForRunTimeStats( void )
+{
+ /* This function is not used by the Blinky build configuration, but needs
+ to be defined as the Blinky and Full build configurations share a
+ FreeRTOSConfig.h header file. */
+}
+/*-----------------------------------------------------------*/
+
+unsigned long ulGetRunTimeCounterValue( void )
+{
+ /* This function is not used by the Blinky build configuration, but needs
+ to be defined as the Blinky and Full build configurations share a
+ FreeRTOSConfig.h header file. */
+ return 0UL;
+}
+/*-----------------------------------------------------------*/
+
+void vApplicationSetupTimerInterrupt( void )
+{
+ //_RB_
+}
+
+
diff --git a/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/src/testperiph.c b/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/src/testperiph.c
index 21b4e9540..d18632d9a 100644
--- a/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/src/testperiph.c
+++ b/Demo/MicroBlaze_Spartan-6_EthernetLite/SDKProjects/RTOSDemoSource/src/testperiph.c
@@ -52,7 +52,7 @@
#define GPIO_CHANNEL1 1
-int main()
+int xmain()
{
static XIntc intc;