Add FreeRTOS-Plus directory.

FreeRTOS/Demo/lwIP_AVR32_UC3/conf_eth.h

@@ -0,0 +1,140 @@
+/*This file is prepared for Doxygen automatic documentation generation.*/
+/*! \file ******************************************************************
+ *
+ * \brief Ethernet module configuration file.
+ *
+ * This file contains the possible external configuration of the Ethernet module.
+ *
+ * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
+ * - Supported devices:  All AVR32 devices can be used.
+ * - AppNote:
+ *
+ * \author               Atmel Corporation: http://www.atmel.com \n
+ *                       Support and FAQ: http://support.atmel.no/
+ *
+ ***************************************************************************/
+
+/* Copyright (c) 2007, Atmel Corporation All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of ATMEL may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
+ * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+#ifndef _CONF_ETH_H_
+#define _CONF_ETH_H_
+
+/*! define stack size for WEB server task */
+#define lwipBASIC_WEB_SERVER_STACK_SIZE   256
+
+/*! define stack size for TFTP server task */
+#define lwipBASIC_TFTP_SERVER_STACK_SIZE  1024
+
+/*! define stack size for SMTP Client task */
+#define lwipBASIC_SMTP_CLIENT_STACK_SIZE  256
+
+/*! define stack size for lwIP task */
+#define lwipINTERFACE_STACK_SIZE          512
+
+/*! define stack size for netif task */
+#define netifINTERFACE_TASK_STACK_SIZE    256
+
+/*! define WEB server priority */
+#define ethWEBSERVER_PRIORITY             ( tskIDLE_PRIORITY + 2 )
+
+/*! define TFTP server priority */
+#define ethTFTPSERVER_PRIORITY            ( tskIDLE_PRIORITY + 3 )
+
+/*! define SMTP Client priority */
+#define ethSMTPCLIENT_PRIORITY            ( tskIDLE_PRIORITY + 5 )
+
+/*! define lwIP task priority */
+#define lwipINTERFACE_TASK_PRIORITY       ( configMAX_PRIORITIES - 1 )
+
+/*! define netif task priority */
+#define netifINTERFACE_TASK_PRIORITY      ( configMAX_PRIORITIES - 1 )
+
+/*! Number of threads that can be started with sys_thread_new() */
+#define SYS_THREAD_MAX                      6
+
+/*! LED used by the ethernet task, toggled on each activation */
+#define webCONN_LED                         7
+
+/*! Phy Address (set through strap options) */
+#define ETHERNET_CONF_PHY_ADDR             0x01
+#define ETHERNET_CONF_PHY_ID               0x20005C90
+
+/*! Number of receive buffers */
+#define ETHERNET_CONF_NB_RX_BUFFERS        20
+
+/*! USE_RMII_INTERFACE must be defined as 1 to use an RMII interface, or 0
+to use an MII interface. */
+#define ETHERNET_CONF_USE_RMII_INTERFACE   1
+
+/*! Number of Transmit buffers */
+#define ETHERNET_CONF_NB_TX_BUFFERS        10
+
+/*! Size of each Transmit buffer. */
+#define ETHERNET_CONF_TX_BUFFER_SIZE       512
+
+/*! Clock definition */
+#define ETHERNET_CONF_SYSTEM_CLOCK         48000000
+
+/*! Use Auto Negociation to get speed and duplex */
+#define ETHERNET_CONF_AN_ENABLE                      1
+
+/*! Do not use auto cross capability */
+#define ETHERNET_CONF_AUTO_CROSS_ENABLE              0
+/*! use direct cable */
+#define ETHERNET_CONF_CROSSED_LINK                   0
+
+
+/* ethernet default parameters */
+/*! MAC address definition.  The MAC address must be unique on the network. */
+#define ETHERNET_CONF_ETHADDR0                        0x00
+#define ETHERNET_CONF_ETHADDR1                        0x04
+#define ETHERNET_CONF_ETHADDR2                        0x25
+#define ETHERNET_CONF_ETHADDR3                        0x40
+#define ETHERNET_CONF_ETHADDR4                        0x40
+#define ETHERNET_CONF_ETHADDR5                        0x40
+
+/*! The IP address being used. */
+#define ETHERNET_CONF_IPADDR0                         192
+#define ETHERNET_CONF_IPADDR1                         168
+#define ETHERNET_CONF_IPADDR2                         0
+#define ETHERNET_CONF_IPADDR3                         2
+
+/*! The gateway address being used. */
+#define ETHERNET_CONF_GATEWAY_ADDR0                   192
+#define ETHERNET_CONF_GATEWAY_ADDR1                   168
+#define ETHERNET_CONF_GATEWAY_ADDR2                   0
+#define ETHERNET_CONF_GATEWAY_ADDR3                   1
+
+/*! The network mask being used. */
+#define ETHERNET_CONF_NET_MASK0                       255
+#define ETHERNET_CONF_NET_MASK1                       255
+#define ETHERNET_CONF_NET_MASK2                       255
+#define ETHERNET_CONF_NET_MASK3                       0
+
+#endif