Add FreeRTOS-Plus directory.

FreeRTOS/Demo/MB91460_Softune/PRC/set_MONITOR.prc

@@ -0,0 +1,53 @@
+# THIS SAMPLE CODE IS PROVIDED AS IS AND IS SUBJECT TO ALTERATIONS. FUJITSU */
+# MICROELECTRONICS ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR */
+# ELIGIBILITY FOR ANY PURPOSES.                                             */
+#                 (C) Fujitsu Microelectronics Europe GmbH                  */
+
+# Environment and memory manioulation after program upload
+
+
+# Settings
+SET VARIABLE abortIRQ0 = 0x1
+SET VARIABLE intVectorMonitorDebugger = 0x10FFC00
+
+
+
+
+# Disable all Interrupts
+SET REGISTER I = 0x0
+
+# Set Table Base Register
+SET REGISTER TBR = intVectorMonitorDebugger
+
+# Run to smd_tbr and save TBR of Application
+go ,Start91460\smd_tbr
+SET VARIABLE intVectorApllication  = %r0
+SET REGISTER TBR = intVectorApllication  
+
+# Copy required vector table entries of monitor debugger in vector table of application
+MOVE intVectorMonitorDebugger + 0x3C0..intVectorMonitorDebugger + 0x3FF, intVectorApllication + 0x3C0
+    
+# Prepare Entries for INT0
+IF %abortIRQ0 == 1
+  MOVE intVectorMonitorDebugger + 0x3C0..intVectorMonitorDebugger + 0x3C3, intVectorApllication + 0x3BC
+  SET MEMORY/BYTE 0x32 = 0x3
+  SET MEMORY/BYTE 0x30 = 0x0
+  SET MEMORY/BYTE 0x31 = 0x1
+  SET MEMORY/BYTE 0x440 = 0x10
+  SET REGISTER ILM = 0x1E
+ENDIF
+
+# Setting indicates software reset, which leads to that the clock settings are not changed.
+SET REGISTER R4 = 0x8
+
+
+# Set TBR to Vector table of application
+SET REGISTER TBR = intVectorApllication 
+
+
+# Run to smd_c and let the CS enabled
+go noClockStartup,Start91460\smd_cs
+set register r2 = %r2|0x3
+
+# Run to main()
+go ,main