Add FreeRTOS-Plus directory.

FreeRTOS/Demo/HCS12_CodeWarrior_banked/readme.txt

@@ -0,0 +1,121 @@
+//------------------------------------------------------------------------
+//  Readme.txt
+//------------------------------------------------------------------------
+This project stationery is designed to get you up and running
+quickly with CodeWarrior for MC9S12DP256B.
+It is set up for the selected CPU and target connection,
+but can be easily modified.
+
+Sample code for the following language(s) is at your disposal:
+- C
+
+The wizard has prepared CodeWarrior target(s) with the connection methods of
+your choice:
+- Simulator:
+  This interface/target is prepared to use the FCS (Full Chip Simulation).
+
+- P&E ICD12:
+  This enables to debug with the P&E ICD12 target interface.
+  The P&E ICD12 target interface allows to debug using the
+  BDM connector with P&E BDM Multilink or Cable12 hardware.
+  The BDM Multilink and Cable12 connect to the host parallel port.
+  Please consult your hardware documentation for additional details.
+
+
+Additional connections can be chosen in the simulator/debugger,
+use the menu Component > Set Target.
+
+//------------------------------------------------------------------------
+//  Processor Expert
+//------------------------------------------------------------------------
+This project is prepared to be designed with Processor Expert.
+The project has an additional 'tab' named 'Processor Expert' where you
+can configure the CPU and its beans.
+The CPU selected is inserted into the Processor Expert project panel, in
+the Debug and Release configurations.
+Change of the configuration is possible by the mouse double-click on it.
+All the installed Embedded Beans are accessible in the Bean Selector
+window, grouped into folders according to their function. The mouse
+double-click on selected Embedded Bean in the Bean Selector window adds
+the Bean to the project. The mouse double-click on the Bean icon in the
+Project panel opens the Bean Inspector window, which is used to set the
+Bean properties. Source code is generated after selecting the
+(Code Design 'Project_name.mcp') menu command from the CodeWarrior main
+window (Processor Expert > Code design 'Project_name.mcp').
+Use the bean methods and events to write your code in the main module
+'Project_name'.c and the event module Events.c.
+
+For more help please read Processor Expert help:
+ (Processor Expert > Help > 'Topic').
+
+The following folders are used in CodeWarrior project window for
+ProcessorExpert:
+- User modules: contains your sources. The main module 'Project_name'.c
+  and event module Events.c are located here after the Processor Expert
+  code generation.
+- Prm: Linker parameter file used for linking. Note that the file used
+  for the linker is specified in the Linker Preference Panel. To open
+  the Preference Panel, please press <ALT-F7> or open the
+  (Edit > 'Current Build Target Name' Settings...) menu item in the
+  CodeWarrior main window menu, while the project window is opened).
+  After Processor Expert code generation 'Project_name'.prm file
+  will be placed here. You can switch off the .prm file generation in
+  Processor Expert if you want (in the CPU bean, Build Options)
+- Generated code: this folder appears after the Processor Expert code
+  generation and contains generated code from Processor Expert.
+- Doc: other files generated from the Processor Expert (documentation)
+
+//------------------------------------------------------------------------
+//  Getting Started
+//------------------------------------------------------------------------
+To build/debug your project, use the menu Project > Debug or press F5.
+This will open the simulator/debugger.
+Press again F5 in the debugger (or menu Run > Start/Continue) to start
+the application. The menu Run > Halt or F6 stops the application.
+In the debugger menu Component > Open you can load additional components.
+
+//------------------------------------------------------------------------
+// Project structure
+//------------------------------------------------------------------------
+The project generated contains various files/folders:
+- readme.txt: this file
+- Sources: folder with the application source code
+- Startup Code: C/C++ startup code
+- Prm:
+   - burner.bbl file to generate S-Records
+- Linker Map: the .map file generated by the linker
+- Libraries: needed library files (ANSI, derivative header/implementation files)
+- Debugger Project File: contains a .ini file for the debugger for each
+  connection
+- Debugger Cmd Files: contains sub-folders for each connection with command
+  files
+
+//------------------------------------------------------------------------
+//  Adding your own code
+//------------------------------------------------------------------------
+Once everything is working as expected, you can begin adding your own code
+to the project. Keep in mind that we provide this as an example of how to
+get up and running quickly with CodeWarrior. There are certainly other
+ways to handle interrupts and set up your linker command file. Feel free
+to modify any of the source files provided.
+
+//------------------------------------------------------------------------
+//  Simulator/Debugger: Additional components
+//------------------------------------------------------------------------
+In the simulator/debugger, you can load additional components. Try the menu
+Component > Open.
+
+//------------------------------------------------------------------------
+//  Additional documentation
+//------------------------------------------------------------------------
+Check out the online documentation provided. Use in CodeWarrior IDE the
+menu Help > Online Manuals.
+
+//------------------------------------------------------------------------
+//  Contacting Metrowerks
+//------------------------------------------------------------------------
+For bug reports, technical questions, and suggestions, please use the
+forms installed in the Release_Notes folder and send them to:
+USA:          support@metrowerks.com
+EUROPE:       support_europe@metrowerks.com
+ASIA/PACIFIC: j-emb-sup@metrowerks.com