Add FreeRTOS-Plus directory.

FreeRTOS/Demo/Common/drivers/Atmel/at91lib/peripherals/aes/aes.c

@@ -0,0 +1,196 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support 
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+#ifndef trace_LEVEL
+    #define trace_LEVEL     1
+#endif
+
+//------------------------------------------------------------------------------
+//         Headers
+//------------------------------------------------------------------------------
+
+#include "aes.h"
+#include <board.h>
+#include <utility/trace.h>
+#include <utility/assert.h>
+
+//------------------------------------------------------------------------------
+//         Global functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// Configures the AES peripheral to encrypt/decrypt, start mode (manual, auto,
+/// PDC) and operating mode (ECB, CBC, OFB, CFB, CTR).
+/// \param cipher  Indicates if the peripheral should encrypt or decrypt data.
+/// \param smode  Start mode.
+/// \param opmode  Operating mode.
+//------------------------------------------------------------------------------
+void AES_Configure(
+    unsigned char cipher,
+    unsigned int smode,
+    unsigned int opmode)
+{
+    trace_LOG(trace_DEBUG, "-D- AES_Configure()\n\r");
+    SANITY_CHECK((cipher & 0xFFFFFFFE) == 0);
+    SANITY_CHECK((smode & 0xFFFFFCFF) == 0);
+    SANITY_CHECK((opmode & 0xFFFF8FFF) == 0);
+
+    // Reset the peripheral first
+    AT91C_BASE_AES->AES_CR = AT91C_AES_SWRST;
+
+    // Configure mode register
+    AT91C_BASE_AES->AES_MR = cipher | smode | opmode;
+}
+
+//------------------------------------------------------------------------------
+/// Sets the key used by the AES algorithm to cipher the plain text or
+/// decipher the encrypted text.
+/// \param pKey  Pointer to a 16-bytes cipher key.
+//------------------------------------------------------------------------------
+void AES_SetKey(const unsigned int *pKey)
+{
+    trace_LOG(trace_DEBUG, "-D- AES_SetKey()\n\r");
+    SANITY_CHECK(pKey);
+
+    AT91C_BASE_AES->AES_KEYWxR[0] = pKey[0];
+    AT91C_BASE_AES->AES_KEYWxR[1] = pKey[1];
+    AT91C_BASE_AES->AES_KEYWxR[2] = pKey[2];
+    AT91C_BASE_AES->AES_KEYWxR[3] = pKey[3];
+}
+
+//------------------------------------------------------------------------------
+/// Sets the initialization vector that is used to encrypt the plain text or
+/// decrypt the cipher text in chained block modes (CBC, CFB, OFB & CTR).
+/// \param pVector  Pointer to a 16-bytes initialization vector.
+//------------------------------------------------------------------------------
+void AES_SetVector(const unsigned int *pVector)
+{
+    trace_LOG(trace_DEBUG, "-D- AES_SetVector()\n\r");
+    SANITY_CHECK(pVector);
+
+    AT91C_BASE_AES->AES_IVxR[0] = pVector[0];
+    AT91C_BASE_AES->AES_IVxR[1] = pVector[1];
+    AT91C_BASE_AES->AES_IVxR[2] = pVector[2];
+    AT91C_BASE_AES->AES_IVxR[3] = pVector[3];
+}
+
+//------------------------------------------------------------------------------
+/// Sets the input data of the AES algorithm (i.e. plain text in cipher mode,
+/// ciphered text in decipher mode). If auto mode is active, the encryption is
+/// started automatically after writing the last word.
+/// \param pData  Pointer to the 16-bytes data to cipher/decipher.
+//------------------------------------------------------------------------------
+void AES_SetInputData(const unsigned int *pData)
+{
+    trace_LOG(trace_DEBUG, "-D- AES_SetInputData()\n\r");
+    SANITY_CHECK(pData);
+
+    AT91C_BASE_AES->AES_IDATAxR[0] = pData[0];
+    AT91C_BASE_AES->AES_IDATAxR[1] = pData[1];
+    AT91C_BASE_AES->AES_IDATAxR[2] = pData[2];
+    AT91C_BASE_AES->AES_IDATAxR[3] = pData[3];
+}
+
+//------------------------------------------------------------------------------
+/// Stores the result of the last AES operation (encrypt/decrypt) in the
+/// provided buffer.
+/// \param pData  Pointer to a 16-bytes buffer.
+//------------------------------------------------------------------------------
+void AES_GetOutputData(unsigned int *pData)
+{
+    trace_LOG(trace_DEBUG, "-D- AES_GetOutputData()\n\r");
+    SANITY_CHECK(pData);
+
+    pData[0] = AT91C_BASE_AES->AES_ODATAxR[0];
+    pData[1] = AT91C_BASE_AES->AES_ODATAxR[1];
+    pData[2] = AT91C_BASE_AES->AES_ODATAxR[2];
+    pData[3] = AT91C_BASE_AES->AES_ODATAxR[3];
+}
+
+//------------------------------------------------------------------------------
+/// Sets the input buffer to use when in PDC mode.
+/// \param pInput  Pointer to the input buffer.
+//------------------------------------------------------------------------------
+void AES_SetInputBuffer(const unsigned int *pInput)
+{
+    trace_LOG(trace_DEBUG, "-D- AES_SetInputBuffer()\n\r");
+    SANITY_CHECK(pInput);
+
+    AT91C_BASE_AES->AES_TPR = (unsigned int) pInput;
+    AT91C_BASE_AES->AES_TCR = 4;
+}
+
+//------------------------------------------------------------------------------
+/// Sets the output buffer to use when in PDC mode.
+/// \param pOutput  Pointer to the output buffer.
+//------------------------------------------------------------------------------
+void AES_SetOutputBuffer(unsigned int *pOutput)
+{
+    trace_LOG(trace_DEBUG, "-D- AES_SetOutputBuffer()\n\r");
+    SANITY_CHECK(pOutput);
+
+    AT91C_BASE_AES->AES_RPR = (unsigned int) pOutput;
+    AT91C_BASE_AES->AES_RCR = 4;
+}
+
+//------------------------------------------------------------------------------
+/// Starts the encryption/decryption process when in manual or PDC mode. In
+/// manual mode, the key and input data must have been entered using
+/// AES_SetKey() and AES_SetInputData(). In PDC mode, the key, input & output
+/// buffer must have been set using AES_SetKey(), AES_SetInputBuffer() and
+/// AES_SetOutputBuffer().
+//------------------------------------------------------------------------------
+void AES_Start(void)
+{
+    trace_LOG(trace_DEBUG, "AES_Start()\n\r");
+    SANITY_CHECK(((AT91C_BASE_AES->AES_MR & AT91C_AES_SMOD) == AT91C_AES_SMOD_MANUAL)
+                 || ((AT91C_BASE_AES->AES_MR & AT91C_AES_SMOD) == AT91C_AES_SMOD_PDC));
+
+    // Manual mode
+    if ((AT91C_BASE_AES->AES_MR & AT91C_AES_SMOD) == AT91C_AES_SMOD_MANUAL) {
+
+        AT91C_BASE_AES->AES_CR = AT91C_AES_START;
+    }
+    // PDC
+    else {
+
+        AT91C_BASE_AES->AES_PTCR = AT91C_PDC_RXTEN | AT91C_PDC_TXTEN;
+    }
+}
+
+//------------------------------------------------------------------------------
+/// Returns the current value of the AES interrupt status register.
+//------------------------------------------------------------------------------
+unsigned int AES_GetStatus(void)
+{
+    trace_LOG(trace_DEBUG, "-D- AES_GetStatus()\n\r");
+
+    return AT91C_BASE_AES->AES_ISR;
+}
+