Add FreeRTOS-Plus directory.

FreeRTOS/Demo/AVR32_UC3/AT32UC3A/GCC/config.mk

@@ -0,0 +1,150 @@
+# Hey Emacs, this is a -*- makefile -*-
+
+# The purpose of this file is to define the build configuration variables used
+# by the generic Makefile. See Makefile header for further information.
+
+# Copyright (c) 2007, Atmel Corporation All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice, this
+# list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation and/
+# or other materials provided with the distribution.
+#
+# 3. The name of ATMEL may not be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
+# SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
+# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
+# OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+# Base paths
+PRJ_PATH = ../..
+APPS_PATH = $(PRJ_PATH)/APPLICATIONS
+BRDS_PATH = $(PRJ_PATH)/BOARDS
+COMP_PATH = $(PRJ_PATH)/COMPONENTS
+DRVR_PATH = $(PRJ_PATH)/DRIVERS
+SERV_PATH = $(PRJ_PATH)/SERVICES
+UTIL_PATH = $(PRJ_PATH)/UTILS
+
+# CPU architecture: {ap|uc}
+ARCH = uc
+
+# Part: {none|ap7xxx|uc3xxxxx}
+PART = uc3a0512
+
+# Flash memories: [{cfi|internal}@address,size]...
+FLASH = internal@0x80000000,512Kb
+
+# Clock source to use when programming: [{xtal|extclk|int}]
+PROG_CLOCK = xtal
+
+# Device/Platform/Board include path
+PLATFORM_INC_PATH = \
+  $(BRDS_PATH)/
+
+# Target name: {*.a|*.elf}
+TARGET = $(PART)-rtosdemo.elf
+
+# Definitions: [-D name[=definition]...] [-U name...]
+# Things that might be added to DEFS:
+#   BOARD             Board used: {EVKxxxx}
+#   EXT_BOARD         Extension board used (if any): {EXTxxxx}
+DEFS = -D BOARD=EVK1100
+
+# Include path
+INC_PATH = \
+  $(UTIL_PATH)/ \
+  $(UTIL_PATH)/PREPROCESSOR/ \
+  $(SERV_PATH)/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/ \
+  $(DRVR_PATH)/INTC/ \
+  $(DRVR_PATH)/PM/ \
+  $(DRVR_PATH)/GPIO/ \
+  $(DRVR_PATH)/TC/ \
+  ../../../../Source/portable/GCC/AVR32_UC3/ \
+  ../../../../Source/include/ \
+  ../../../Common/include/ \
+  ../../
+
+# C source files
+CSRCS = \
+  $(BRDS_PATH)/EVK1100/led.c \
+  $(DRVR_PATH)/INTC/intc.c \
+  $(DRVR_PATH)/PM/pm.c \
+  $(DRVR_PATH)/GPIO/gpio.c \
+  $(DRVR_PATH)/TC/tc.c \
+  ../../../../Source/portable/GCC/AVR32_UC3/port.c \
+  ../../../../Source/portable/MemMang/heap_3.c \
+  ../../../../Source/list.c \
+  ../../../../Source/queue.c \
+  ../../../../Source/tasks.c \
+  ../../../Common/Minimal/BlockQ.c \
+  ../../../Common/Minimal/comtest.c \
+  ../../../Common/Minimal/death.c \
+  ../../../Common/Minimal/dynamic.c \
+  ../../../Common/Minimal/flash.c \
+  ../../../Common/Minimal/flop.c \
+  ../../../Common/Minimal/integer.c \
+  ../../../Common/Minimal/PollQ.c \
+  ../../../Common/Minimal/semtest.c \
+  ../../ParTest/ParTest.c \
+  ../../serial/serial.c \
+  ../../main.c
+
+# Assembler source files
+ASSRCS = \
+  $(SERV_PATH)/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.S \
+  ../../../../Source/portable/GCC/AVR32_UC3/exception.S
+
+# Library path
+LIB_PATH =
+
+# Libraries to link with the project
+LIBS =
+
+# Linker script file if any
+LINKER_SCRIPT = $(UTIL_PATH)/LINKER_SCRIPTS/AT32UC3A/0512/GCC/link_uc3a0512.lds
+
+# Options to request or suppress warnings: [-fsyntax-only] [-pedantic[-errors]] [-w] [-Wwarning...]
+# For further details, refer to the chapter "GCC Command Options" of the GCC manual.
+WARNINGS = -Wall
+
+# Options for debugging: [-g]...
+# For further details, refer to the chapter "GCC Command Options" of the GCC manual.
+DEBUG = -g
+
+# Options that control optimization: [-O[0|1|2|3|s]]...
+# For further details, refer to the chapter "GCC Command Options" of the GCC manual.
+OPTIMIZATION = -O0 -ffunction-sections -fdata-sections
+
+# Extra flags to use when preprocessing
+CPP_EXTRA_FLAGS =
+
+# Extra flags to use when compiling
+C_EXTRA_FLAGS =
+
+# Extra flags to use when assembling
+AS_EXTRA_FLAGS =
+
+# Extra flags to use when linking
+LD_EXTRA_FLAGS = -Wl,--gc-sections -Wl,-e,_trampoline
+
+# Documentation path
+DOC_PATH = \
+  ../../DOC/
+
+# Documentation configuration file
+DOC_CFG = \
+  ../doxyfile.doxygen