mirror of
https://github.com/FreeRTOS/FreeRTOS-Kernel.git
synced 2025-06-04 03:19:04 -04:00
New demo being added - work in progress.
This commit is contained in:
Richard Barry
parent
efc8243397
commit
e540f0abf4
78
Source/portable/IAR/AtmelSAM9XE/ISR_Support.h
Normal file
78
Source/portable/IAR/AtmelSAM9XE/ISR_Support.h
Normal file
|
|
@ -0,0 +1,78 @@
|
|||
EXTERN pxCurrentTCB
|
||||
EXTERN ulCriticalNesting
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; Context save and restore macro definitions
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
|
||||
portSAVE_CONTEXT MACRO
|
||||
|
||||
; Push R0 as we are going to use the register.
|
||||
STMDB SP!, {R0}
|
||||
|
||||
; Set R0 to point to the task stack pointer.
|
||||
STMDB SP, {SP}^
|
||||
NOP
|
||||
SUB SP, SP, #4
|
||||
LDMIA SP!, {R0}
|
||||
|
||||
; Push the return address onto the stack.
|
||||
STMDB R0!, {LR}
|
||||
|
||||
; Now we have saved LR we can use it instead of R0.
|
||||
MOV LR, R0
|
||||
|
||||
; Pop R0 so we can save it onto the system mode stack.
|
||||
LDMIA SP!, {R0}
|
||||
|
||||
; Push all the system mode registers onto the task stack.
|
||||
STMDB LR, {R0-LR}^
|
||||
NOP
|
||||
SUB LR, LR, #60
|
||||
|
||||
; Push the SPSR onto the task stack.
|
||||
MRS R0, SPSR
|
||||
STMDB LR!, {R0}
|
||||
|
||||
LDR R0, =ulCriticalNesting
|
||||
LDR R0, [R0]
|
||||
STMDB LR!, {R0}
|
||||
|
||||
; Store the new top of stack for the task.
|
||||
LDR R1, =pxCurrentTCB
|
||||
LDR R0, [R1]
|
||||
STR LR, [R0]
|
||||
|
||||
ENDM
|
||||
|
||||
|
||||
portRESTORE_CONTEXT MACRO
|
||||
|
||||
; Set the LR to the task stack.
|
||||
LDR R1, =pxCurrentTCB
|
||||
LDR R0, [R1]
|
||||
LDR LR, [R0]
|
||||
|
||||
; The critical nesting depth is the first item on the stack.
|
||||
; Load it into the ulCriticalNesting variable.
|
||||
LDR R0, =ulCriticalNesting
|
||||
LDMFD LR!, {R1}
|
||||
STR R1, [R0]
|
||||
|
||||
; Get the SPSR from the stack.
|
||||
LDMFD LR!, {R0}
|
||||
MSR SPSR_cxsf, R0
|
||||
|
||||
; Restore all system mode registers for the task.
|
||||
LDMFD LR, {R0-R14}^
|
||||
NOP
|
||||
|
||||
; Restore the return address.
|
||||
LDR LR, [LR, #+60]
|
||||
|
||||
; And return - correcting the offset in the LR to obtain the
|
||||
; correct address.
|
||||
SUBS PC, LR, #4
|
||||
|
||||
ENDM
|
||||
|
||||
280
Source/portable/IAR/AtmelSAM9XE/port.c
Normal file
280
Source/portable/IAR/AtmelSAM9XE/port.c
Normal file
|
|
@ -0,0 +1,280 @@
|
|||
/*
|
||||
FreeRTOS.org V5.1.1 - Copyright (C) 2003-2008 Richard Barry.
|
||||
|
||||
This file is part of the FreeRTOS.org distribution.
|
||||
|
||||
FreeRTOS.org is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
FreeRTOS.org is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with FreeRTOS.org; if not, write to the Free Software
|
||||
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
|
||||
A special exception to the GPL can be applied should you wish to distribute
|
||||
a combined work that includes FreeRTOS.org, without being obliged to provide
|
||||
the source code for any proprietary components. See the licensing section
|
||||
of http://www.FreeRTOS.org for full details of how and when the exception
|
||||
can be applied.
|
||||
|
||||
***************************************************************************
|
||||
***************************************************************************
|
||||
* *
|
||||
* SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
|
||||
* and even write all or part of your application on your behalf. *
|
||||
* See http://www.OpenRTOS.com for details of the services we provide to *
|
||||
* expedite your project. *
|
||||
* *
|
||||
***************************************************************************
|
||||
***************************************************************************
|
||||
|
||||
Please ensure to read the configuration and relevant port sections of the
|
||||
online documentation.
|
||||
|
||||
http://www.FreeRTOS.org - Documentation, latest information, license and
|
||||
contact details.
|
||||
|
||||
http://www.SafeRTOS.com - A version that is certified for use in safety
|
||||
critical systems.
|
||||
|
||||
http://www.OpenRTOS.com - Commercial support, development, porting,
|
||||
licensing and training services.
|
||||
*/
|
||||
|
||||
/*-----------------------------------------------------------
|
||||
* Implementation of functions defined in portable.h for the Atmel ARM7 port.
|
||||
*----------------------------------------------------------*/
|
||||
|
||||
|
||||
/* Standard includes. */
|
||||
#include <stdlib.h>
|
||||
|
||||
/* Scheduler includes. */
|
||||
#include "FreeRTOS.h"
|
||||
#include "task.h"
|
||||
|
||||
/* Hardware includes. */
|
||||
#include <board.h>
|
||||
#include <pio/pio.h>
|
||||
#include <pio/pio_it.h>
|
||||
#include <pit/pit.h>
|
||||
#include <aic/aic.h>
|
||||
#include <tc/tc.h>
|
||||
#include <utility/led.h>
|
||||
#include <utility/trace.h>
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* Constants required to setup the initial stack. */
|
||||
#define portINITIAL_SPSR ( ( portSTACK_TYPE ) 0x3f ) /* System mode, THUMB mode, interrupts enabled. */
|
||||
#define portINSTRUCTION_SIZE ( ( portSTACK_TYPE ) 4 )
|
||||
|
||||
/* Constants required to setup the PIT. */
|
||||
#define port1MHz_IN_Hz ( 1000000ul )
|
||||
#define port1SECOND_IN_uS ( 1000000ul )
|
||||
|
||||
/* Constants required to handle critical sections. */
|
||||
#define portNO_CRITICAL_NESTING ( ( unsigned portLONG ) 0 )
|
||||
|
||||
|
||||
#define portINT_LEVEL_SENSITIVE 0
|
||||
#define portPIT_ENABLE ( ( unsigned portSHORT ) 0x1 << 24 )
|
||||
#define portPIT_INT_ENABLE ( ( unsigned portSHORT ) 0x1 << 25 )
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* Setup the PIT to generate the tick interrupts. */
|
||||
static void prvSetupTimerInterrupt( void );
|
||||
|
||||
/* ulCriticalNesting will get set to zero when the first task starts. It
|
||||
cannot be initialised to 0 as this will cause interrupts to be enabled
|
||||
during the kernel initialisation process. */
|
||||
unsigned portLONG ulCriticalNesting = ( unsigned portLONG ) 9999;
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/*
|
||||
* Initialise the stack of a task to look exactly as if a call to
|
||||
* portSAVE_CONTEXT had been called.
|
||||
*
|
||||
* See header file for description.
|
||||
*/
|
||||
portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters )
|
||||
{
|
||||
portSTACK_TYPE *pxOriginalTOS;
|
||||
|
||||
pxOriginalTOS = pxTopOfStack;
|
||||
|
||||
/* Setup the initial stack of the task. The stack is set exactly as
|
||||
expected by the portRESTORE_CONTEXT() macro. */
|
||||
|
||||
/* First on the stack is the return address - which in this case is the
|
||||
start of the task. The offset is added to make the return address appear
|
||||
as it would within an IRQ ISR. */
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) pxCode + portINSTRUCTION_SIZE;
|
||||
pxTopOfStack--;
|
||||
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0xaaaaaaaa; /* R14 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x12121212; /* R12 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x11111111; /* R11 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x10101010; /* R10 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x09090909; /* R9 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x08080808; /* R8 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x07070707; /* R7 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x06060606; /* R6 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x05050505; /* R5 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x04040404; /* R4 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x03030303; /* R3 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x02020202; /* R2 */
|
||||
pxTopOfStack--;
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) 0x01010101; /* R1 */
|
||||
pxTopOfStack--;
|
||||
|
||||
/* When the task starts is will expect to find the function parameter in
|
||||
R0. */
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) pvParameters; /* R0 */
|
||||
pxTopOfStack--;
|
||||
|
||||
/* The status register is set for system mode, with interrupts enabled. */
|
||||
*pxTopOfStack = ( portSTACK_TYPE ) portINITIAL_SPSR;
|
||||
pxTopOfStack--;
|
||||
|
||||
/* Interrupt flags cannot always be stored on the stack and will
|
||||
instead be stored in a variable, which is then saved as part of the
|
||||
tasks context. */
|
||||
*pxTopOfStack = portNO_CRITICAL_NESTING;
|
||||
|
||||
return pxTopOfStack;
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
portBASE_TYPE xPortStartScheduler( void )
|
||||
{
|
||||
extern void vPortStartFirstTask( void );
|
||||
|
||||
/* Start the timer that generates the tick ISR. Interrupts are disabled
|
||||
here already. */
|
||||
prvSetupTimerInterrupt();
|
||||
|
||||
/* Start the first task. */
|
||||
vPortStartFirstTask();
|
||||
|
||||
/* Should not get here! */
|
||||
return 0;
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
void vPortEndScheduler( void )
|
||||
{
|
||||
/* It is unlikely that the ARM port will require this function as there
|
||||
is nothing to return to. */
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
#if configUSE_PREEMPTION == 0
|
||||
|
||||
/* The cooperative scheduler requires a normal IRQ service routine to
|
||||
simply increment the system tick. */
|
||||
static __arm __irq void vPortNonPreemptiveTick( void );
|
||||
static __arm __irq void vPortNonPreemptiveTick( void )
|
||||
{
|
||||
unsigned portLONG ulDummy;
|
||||
|
||||
/* Increment the tick count - which may wake some tasks but as the
|
||||
preemptive scheduler is not being used any woken task is not given
|
||||
processor time no matter what its priority. */
|
||||
vTaskIncrementTick();
|
||||
|
||||
/* Clear the PIT interrupt. */
|
||||
ulDummy = AT91C_BASE_PITC->PITC_PIVR;
|
||||
|
||||
/* End the interrupt in the AIC. */
|
||||
AT91C_BASE_AIC->AIC_EOICR = ulDummy;
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
/* Currently the IAR port requires the preemptive tick function to be
|
||||
defined in an asm file. */
|
||||
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
static void prvSetupTimerInterrupt( void )
|
||||
{
|
||||
const unsigned portLONG ulPeriodIn_uS = ( 1 / configTICK_RATE_HZ ) * port1SECOND_IN_uS;
|
||||
|
||||
/* Setup the PIT for the required frequency. */
|
||||
PIT_Init( ulPeriodIn_uS, BOARD_MCK / port1MHz_IN_Hz );
|
||||
|
||||
/* Setup the PIT interrupt. */
|
||||
AIC_DisableIT( AT91C_ID_SYS );
|
||||
|
||||
#if configUSE_PREEMPTION == 0
|
||||
AIC_ConfigureIT( AT91C_ID_SYS, AT91C_AIC_PRIOR_LOWEST, vPortNonPreemptiveTick );
|
||||
#else
|
||||
extern void ( vPortPreemptiveTick )( void );
|
||||
AIC_ConfigureIT( AT91C_ID_SYS, AT91C_AIC_PRIOR_LOWEST, vPortPreemptiveTick );
|
||||
#endif
|
||||
|
||||
AIC_EnableIT( AT91C_ID_SYS );
|
||||
PIT_EnableIT();
|
||||
|
||||
/* Enable the PIT itself. */
|
||||
PIT_Enable();
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
void vPortEnterCritical( void )
|
||||
{
|
||||
/* Disable interrupts first! */
|
||||
__disable_irq();
|
||||
|
||||
/* Now interrupts are disabled ulCriticalNesting can be accessed
|
||||
directly. Increment ulCriticalNesting to keep a count of how many times
|
||||
portENTER_CRITICAL() has been called. */
|
||||
ulCriticalNesting++;
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
void vPortExitCritical( void )
|
||||
{
|
||||
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
|
||||
{
|
||||
/* Decrement the nesting count as we are leaving a critical section. */
|
||||
ulCriticalNesting--;
|
||||
|
||||
/* If the nesting level has reached zero then interrupts should be
|
||||
re-enabled. */
|
||||
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
|
||||
{
|
||||
__enable_irq();
|
||||
}
|
||||
}
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
58
Source/portable/IAR/AtmelSAM9XE/portasm.s79
Normal file
58
Source/portable/IAR/AtmelSAM9XE/portasm.s79
Normal file
|
|
@ -0,0 +1,58 @@
|
|||
RSEG ICODE:CODE
|
||||
CODE32
|
||||
|
||||
EXTERN vTaskSwitchContext
|
||||
EXTERN vTaskIncrementTick
|
||||
|
||||
PUBLIC vPortYieldProcessor
|
||||
PUBLIC vPortPreemptiveTick
|
||||
PUBLIC vPortStartFirstTask
|
||||
|
||||
#include "ISR_Support.h"
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; Starting the first task is just a matter of restoring the context that
|
||||
; was created by pxPortInitialiseStack().
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
vPortStartFirstTask:
|
||||
portRESTORE_CONTEXT
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; Manual context switch function. This is the SWI hander.
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
vPortYieldProcessor:
|
||||
ADD LR, LR, #4 ; Add 4 to the LR to make the LR appear exactly
|
||||
; as if the context was saved during and IRQ
|
||||
; handler.
|
||||
|
||||
portSAVE_CONTEXT ; Save the context of the current task...
|
||||
LDR R0, =vTaskSwitchContext ; before selecting the next task to execute.
|
||||
mov lr, pc
|
||||
BX R0
|
||||
portRESTORE_CONTEXT ; Restore the context of the selected task.
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
; Preemptive context switch function. This will only ever get installed if
|
||||
; portUSE_PREEMPTION is set to 1 in portmacro.h.
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
vPortPreemptiveTick:
|
||||
portSAVE_CONTEXT ; Save the context of the current task.
|
||||
|
||||
LDR R0, =vTaskIncrementTick ; Increment the tick count - this may wake a task.
|
||||
mov lr, pc
|
||||
BX R0
|
||||
LDR R0, =vTaskSwitchContext ; Select the next task to execute.
|
||||
mov lr, pc
|
||||
BX R0
|
||||
#if 0
|
||||
LDR R14, =AT91C_BASE_PITC ; Clear the PIT interrupt
|
||||
LDR R0, [R14, #PITC_PIVR ]
|
||||
|
||||
LDR R14, =AT91C_BASE_AIC ; Mark the End of Interrupt on the AIC
|
||||
STR R14, [R14, #AIC_EOICR]
|
||||
#endif
|
||||
portRESTORE_CONTEXT ; Restore the context of the selected task.
|
||||
|
||||
|
||||
END
|
||||
|
||||
131
Source/portable/IAR/AtmelSAM9XE/portmacro.h
Normal file
131
Source/portable/IAR/AtmelSAM9XE/portmacro.h
Normal file
|
|
@ -0,0 +1,131 @@
|
|||
/*
|
||||
FreeRTOS.org V5.1.1 - Copyright (C) 2003-2008 Richard Barry.
|
||||
|
||||
This file is part of the FreeRTOS.org distribution.
|
||||
|
||||
FreeRTOS.org is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
FreeRTOS.org is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with FreeRTOS.org; if not, write to the Free Software
|
||||
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
|
||||
A special exception to the GPL can be applied should you wish to distribute
|
||||
a combined work that includes FreeRTOS.org, without being obliged to provide
|
||||
the source code for any proprietary components. See the licensing section
|
||||
of http://www.FreeRTOS.org for full details of how and when the exception
|
||||
can be applied.
|
||||
|
||||
***************************************************************************
|
||||
***************************************************************************
|
||||
* *
|
||||
* SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *
|
||||
* and even write all or part of your application on your behalf. *
|
||||
* See http://www.OpenRTOS.com for details of the services we provide to *
|
||||
* expedite your project. *
|
||||
* *
|
||||
***************************************************************************
|
||||
***************************************************************************
|
||||
|
||||
Please ensure to read the configuration and relevant port sections of the
|
||||
online documentation.
|
||||
|
||||
http://www.FreeRTOS.org - Documentation, latest information, license and
|
||||
contact details.
|
||||
|
||||
http://www.SafeRTOS.com - A version that is certified for use in safety
|
||||
critical systems.
|
||||
|
||||
http://www.OpenRTOS.com - Commercial support, development, porting,
|
||||
licensing and training services.
|
||||
*/
|
||||
|
||||
|
||||
#ifndef PORTMACRO_H
|
||||
#define PORTMACRO_H
|
||||
|
||||
#include <intrinsics.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------
|
||||
* Port specific definitions.
|
||||
*
|
||||
* The settings in this file configure FreeRTOS correctly for the
|
||||
* given hardware and compiler.
|
||||
*
|
||||
* These settings should not be altered.
|
||||
*-----------------------------------------------------------
|
||||
*/
|
||||
|
||||
/* Type definitions. */
|
||||
#define portCHAR char
|
||||
#define portFLOAT float
|
||||
#define portDOUBLE double
|
||||
#define portLONG long
|
||||
#define portSHORT short
|
||||
#define portSTACK_TYPE unsigned portLONG
|
||||
#define portBASE_TYPE portLONG
|
||||
|
||||
#if( configUSE_16_BIT_TICKS == 1 )
|
||||
typedef unsigned portSHORT portTickType;
|
||||
#define portMAX_DELAY ( portTickType ) 0xffff
|
||||
#else
|
||||
typedef unsigned portLONG portTickType;
|
||||
#define portMAX_DELAY ( portTickType ) 0xffffffff
|
||||
#endif
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* Hardware specifics. */
|
||||
#define portSTACK_GROWTH ( -1 )
|
||||
#define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ )
|
||||
#define portBYTE_ALIGNMENT 8
|
||||
#define portYIELD() asm ( "SWI 0" )
|
||||
#define portNOP() asm ( "NOP" )
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* Critical section handling. */
|
||||
__arm __interwork void vPortDisableInterruptsFromThumb( void );
|
||||
__arm __interwork void vPortEnableInterruptsFromThumb( void );
|
||||
__arm __interwork void vPortEnterCritical( void );
|
||||
__arm __interwork void vPortExitCritical( void );
|
||||
|
||||
#define portDISABLE_INTERRUPTS() __disable_irq()
|
||||
#define portENABLE_INTERRUPTS() __enable_irq()
|
||||
#define portENTER_CRITICAL() vPortEnterCritical()
|
||||
#define portEXIT_CRITICAL() vPortExitCritical()
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* Task utilities. */
|
||||
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
|
||||
{ \
|
||||
extern void vTaskSwitchContext( void ); \
|
||||
\
|
||||
if( xSwitchRequired ) \
|
||||
{ \
|
||||
vTaskSwitchContext(); \
|
||||
} \
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
|
||||
/* Task function macros as described on the FreeRTOS.org WEB site. */
|
||||
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
|
||||
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* PORTMACRO_H */
|
||||
|
||||
|
||||
Loading…
Reference in a new issue