mirror of
https://github.com/FreeRTOS/FreeRTOS-Kernel.git
synced 2025-09-12 00:57:44 -04:00
Update GCC compiler for:
* RX600v2 * RX600 * RX100 Signed-off-by: Dinh Van Nam <vannam.dinh.xt@renesas.com>
This commit is contained in:
Dinh Van Nam
parent
226af680e1
commit
d7c280593d
6 changed files with 1146 additions and 1136 deletions
|
|
@ -40,16 +40,20 @@
|
|||
#include "string.h"
|
||||
|
||||
/* Hardware specifics. */
|
||||
#if defined(configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H) && (configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H == 1)
|
||||
#include "platform.h"
|
||||
#else
|
||||
#include "iodefine.h"
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* Tasks should start with interrupts enabled and in Supervisor mode, therefore
|
||||
* PSW is set with U and I set, and PM and IPL clear. */
|
||||
PSW is set with U and I set, and PM and IPL clear. */
|
||||
#define portINITIAL_PSW ( ( StackType_t ) 0x00030000 )
|
||||
|
||||
/* The peripheral clock is divided by this value before being supplying the
|
||||
* CMT. */
|
||||
CMT. */
|
||||
#if ( configUSE_TICKLESS_IDLE == 0 )
|
||||
/* If tickless idle is not used then the divisor can be fixed. */
|
||||
#define portCLOCK_DIVISOR 8UL
|
||||
|
|
@ -64,15 +68,15 @@
|
|||
#endif
|
||||
|
||||
/* These macros allow a critical section to be added around the call to
|
||||
* xTaskIncrementTick(), which is only ever called from interrupts at the kernel
|
||||
* priority - ie a known priority. Therefore these local macros are a slight
|
||||
* optimisation compared to calling the global SET/CLEAR_INTERRUPT_MASK macros,
|
||||
* which would require the old IPL to be read first and stored in a local variable. */
|
||||
xTaskIncrementTick(), which is only ever called from interrupts at the kernel
|
||||
priority - ie a known priority. Therefore these local macros are a slight
|
||||
optimisation compared to calling the global SET/CLEAR_INTERRUPT_MASK macros,
|
||||
which would require the old IPL to be read first and stored in a local variable. */
|
||||
#define portDISABLE_INTERRUPTS_FROM_KERNEL_ISR() __asm volatile ( "MVTIPL %0" ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) )
|
||||
#define portENABLE_INTERRUPTS_FROM_KERNEL_ISR() __asm volatile ( "MVTIPL %0" ::"i"(configKERNEL_INTERRUPT_PRIORITY) )
|
||||
|
||||
/* Keys required to lock and unlock access to certain system registers
|
||||
* respectively. */
|
||||
respectively. */
|
||||
#define portUNLOCK_KEY 0xA50B
|
||||
#define portLOCK_KEY 0xA500
|
||||
|
||||
|
|
@ -89,13 +93,21 @@ static void prvStartFirstTask( void ) __attribute__( ( naked ) );
|
|||
* restoring of registers). Written in asm code as direct register access is
|
||||
* required.
|
||||
*/
|
||||
#if defined(configTICK_VECTOR)
|
||||
void vPortSoftwareInterruptISR( void ) __attribute__((naked, vector( R_BSP_SECNAME_INTVECTTBL, VECT_ICU_SWINT )));
|
||||
#else
|
||||
void vPortSoftwareInterruptISR( void ) __attribute__((naked));
|
||||
#endif
|
||||
|
||||
/*
|
||||
* The tick interrupt handler.
|
||||
*/
|
||||
void vPortTickISR( void ) __attribute__( ( interrupt ) );
|
||||
|
||||
#if defined(configTICK_VECTOR)
|
||||
void vPortTickISR( void ) __attribute__((interrupt( R_BSP_SECNAME_INTVECTTBL, _VECT( configTICK_VECTOR ) )));
|
||||
#else
|
||||
void vPortTickISR( void ) __attribute__((interrupt));
|
||||
#endif
|
||||
/*
|
||||
* Sets up the periodic ISR used for the RTOS tick using the CMT.
|
||||
* The application writer can define configSETUP_TICK_INTERRUPT() (in
|
||||
|
|
@ -104,9 +116,8 @@ void vPortTickISR( void ) __attribute__( ( interrupt ) );
|
|||
*/
|
||||
static void prvSetupTimerInterrupt( void );
|
||||
#ifndef configSETUP_TICK_INTERRUPT
|
||||
|
||||
/* The user has not provided their own tick interrupt configuration so use
|
||||
* the definition in this file (which uses the interval timer). */
|
||||
the definition in this file (which uses the interval timer). */
|
||||
#define configSETUP_TICK_INTERRUPT() prvSetupTimerInterrupt()
|
||||
#endif /* configSETUP_TICK_INTERRUPT */
|
||||
|
||||
|
|
@ -130,34 +141,32 @@ static const uint32_t ulMatchValueForOneTick = ( ( configPERIPHERAL_CLOCK_HZ / p
|
|||
#if configUSE_TICKLESS_IDLE == 1
|
||||
|
||||
/* Holds the maximum number of ticks that can be suppressed - which is
|
||||
* basically how far into the future an interrupt can be generated. Set
|
||||
* during initialisation. This is the maximum possible value that the
|
||||
* compare match register can hold divided by ulMatchValueForOneTick. */
|
||||
basically how far into the future an interrupt can be generated. Set
|
||||
during initialisation. This is the maximum possible value that the
|
||||
compare match register can hold divided by ulMatchValueForOneTick. */
|
||||
static const TickType_t xMaximumPossibleSuppressedTicks = USHRT_MAX / ( ( configPERIPHERAL_CLOCK_HZ / portCLOCK_DIVISOR ) / configTICK_RATE_HZ );
|
||||
|
||||
/* Flag set from the tick interrupt to allow the sleep processing to know if
|
||||
* sleep mode was exited because of a tick interrupt, or an interrupt
|
||||
* generated by something else. */
|
||||
sleep mode was exited because of a tick interrupt, or an interrupt
|
||||
generated by something else. */
|
||||
static volatile uint32_t ulTickFlag = pdFALSE;
|
||||
|
||||
/* The CMT counter is stopped temporarily each time it is re-programmed.
|
||||
* The following constant offsets the CMT counter match value by the number of
|
||||
* CMT counts that would typically be missed while the counter was stopped to
|
||||
* compensate for the lost time. The large difference between the divided CMT
|
||||
* clock and the CPU clock means it is likely ulStoppedTimerCompensation will
|
||||
* equal zero - and be optimised away. */
|
||||
The following constant offsets the CMT counter match value by the number of
|
||||
CMT counts that would typically be missed while the counter was stopped to
|
||||
compensate for the lost time. The large difference between the divided CMT
|
||||
clock and the CPU clock means it is likely ulStoppedTimerCompensation will
|
||||
equal zero - and be optimised away. */
|
||||
static const uint32_t ulStoppedTimerCompensation = 100UL / ( configCPU_CLOCK_HZ / ( configPERIPHERAL_CLOCK_HZ / portCLOCK_DIVISOR ) );
|
||||
|
||||
#endif /* if configUSE_TICKLESS_IDLE == 1 */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/*
|
||||
* See header file for description.
|
||||
*/
|
||||
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
|
||||
TaskFunction_t pxCode,
|
||||
void * pvParameters )
|
||||
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
|
||||
{
|
||||
/* Offset to end up on 8 byte boundary. */
|
||||
pxTopOfStack--;
|
||||
|
|
@ -172,8 +181,8 @@ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
|
|||
*pxTopOfStack = ( StackType_t ) pxCode;
|
||||
|
||||
/* When debugging it can be useful if every register is set to a known
|
||||
* value. Otherwise code space can be saved by just setting the registers
|
||||
* that need to be set. */
|
||||
value. Otherwise code space can be saved by just setting the registers
|
||||
that need to be set. */
|
||||
#ifdef USE_FULL_REGISTER_INITIALISATION
|
||||
{
|
||||
pxTopOfStack--;
|
||||
|
|
@ -206,13 +215,13 @@ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
|
|||
*pxTopOfStack = 0x22222222;
|
||||
pxTopOfStack--;
|
||||
}
|
||||
#else /* ifdef USE_FULL_REGISTER_INITIALISATION */
|
||||
#else
|
||||
{
|
||||
/* Leave space for the registers that will get popped from the stack
|
||||
* when the task first starts executing. */
|
||||
when the task first starts executing. */
|
||||
pxTopOfStack -= 15;
|
||||
}
|
||||
#endif /* ifdef USE_FULL_REGISTER_INITIALISATION */
|
||||
#endif
|
||||
|
||||
*pxTopOfStack = ( StackType_t ) pvParameters; /* R1 */
|
||||
pxTopOfStack--;
|
||||
|
|
@ -230,10 +239,10 @@ BaseType_t xPortStartScheduler( void )
|
|||
if( pxCurrentTCB != NULL )
|
||||
{
|
||||
/* Call an application function to set up the timer that will generate
|
||||
* the tick interrupt. This way the application can decide which
|
||||
* peripheral to use. If tickless mode is used then the default
|
||||
* implementation defined in this file (which uses CMT0) should not be
|
||||
* overridden. */
|
||||
the tick interrupt. This way the application can decide which
|
||||
peripheral to use. If tickless mode is used then the default
|
||||
implementation defined in this file (which uses CMT0) should not be
|
||||
overridden. */
|
||||
configSETUP_TICK_INTERRUPT();
|
||||
|
||||
/* Enable the software interrupt. */
|
||||
|
|
@ -250,11 +259,11 @@ BaseType_t xPortStartScheduler( void )
|
|||
}
|
||||
|
||||
/* Execution should not reach here as the tasks are now running!
|
||||
* prvSetupTimerInterrupt() is called here to prevent the compiler outputting
|
||||
* a warning about a statically declared function not being referenced in the
|
||||
* case that the application writer has provided their own tick interrupt
|
||||
* configuration routine (and defined configSETUP_TICK_INTERRUPT() such that
|
||||
* their own routine will be called in place of prvSetupTimerInterrupt()). */
|
||||
prvSetupTimerInterrupt() is called here to prevent the compiler outputting
|
||||
a warning about a statically declared function not being referenced in the
|
||||
case that the application writer has provided their own tick interrupt
|
||||
configuration routine (and defined configSETUP_TICK_INTERRUPT() such that
|
||||
their own routine will be called in place of prvSetupTimerInterrupt()). */
|
||||
prvSetupTimerInterrupt();
|
||||
|
||||
/* Should not get here. */
|
||||
|
|
@ -265,7 +274,7 @@ BaseType_t xPortStartScheduler( void )
|
|||
void vPortEndScheduler( void )
|
||||
{
|
||||
/* Not implemented in ports where there is nothing to return to.
|
||||
* Artificially force an assert. */
|
||||
Artificially force an assert. */
|
||||
configASSERT( pxCurrentTCB == NULL );
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
|
@ -274,22 +283,19 @@ static void prvStartFirstTask( void )
|
|||
{
|
||||
__asm volatile
|
||||
(
|
||||
|
||||
/* When starting the scheduler there is nothing that needs moving to the
|
||||
* interrupt stack because the function is not called from an interrupt.
|
||||
* Just ensure the current stack is the user stack. */
|
||||
interrupt stack because the function is not called from an interrupt.
|
||||
Just ensure the current stack is the user stack. */
|
||||
"SETPSW U \n" \
|
||||
|
||||
|
||||
/* Obtain the location of the stack associated with which ever task
|
||||
* pxCurrentTCB is currently pointing to. */
|
||||
pxCurrentTCB is currently pointing to. */
|
||||
"MOV.L #_pxCurrentTCB, R15 \n" \
|
||||
"MOV.L [R15], R15 \n" \
|
||||
"MOV.L [R15], R0 \n" \
|
||||
|
||||
|
||||
/* Restore the registers from the stack of the task pointed to by
|
||||
* pxCurrentTCB. */
|
||||
pxCurrentTCB. */
|
||||
"POP R15 \n" \
|
||||
|
||||
/* Accumulator low 32 bits. */
|
||||
|
|
@ -317,11 +323,10 @@ void vPortSoftwareInterruptISR( void )
|
|||
/* Re-enable interrupts. */
|
||||
"SETPSW I \n" \
|
||||
|
||||
|
||||
/* Move the data that was automatically pushed onto the interrupt stack when
|
||||
* the interrupt occurred from the interrupt stack to the user stack.
|
||||
*
|
||||
* R15 is saved before it is clobbered. */
|
||||
the interrupt occurred from the interrupt stack to the user stack.
|
||||
|
||||
R15 is saved before it is clobbered. */
|
||||
"PUSH.L R15 \n" \
|
||||
|
||||
/* Read the user stack pointer. */
|
||||
|
|
@ -361,9 +366,8 @@ void vPortSoftwareInterruptISR( void )
|
|||
"MOV.L [ R15 ], R15 \n" \
|
||||
"MOV.L R0, [ R15 ] \n" \
|
||||
|
||||
|
||||
/* Ensure the interrupt mask is set to the syscall priority while the kernel
|
||||
* structures are being accessed. */
|
||||
structures are being accessed. */
|
||||
"MVTIPL %0 \n" \
|
||||
|
||||
/* Select the next task to run. */
|
||||
|
|
@ -372,16 +376,14 @@ void vPortSoftwareInterruptISR( void )
|
|||
/* Reset the interrupt mask as no more data structure access is required. */
|
||||
"MVTIPL %1 \n" \
|
||||
|
||||
|
||||
/* Load the stack pointer of the task that is now selected as the Running
|
||||
* state task from its TCB. */
|
||||
state task from its TCB. */
|
||||
"MOV.L #_pxCurrentTCB,R15 \n" \
|
||||
"MOV.L [ R15 ], R15 \n" \
|
||||
"MOV.L [ R15 ], R0 \n" \
|
||||
|
||||
|
||||
/* Restore the context of the new task. The PSW (Program Status Word) and
|
||||
* PC will be popped by the RTE instruction. */
|
||||
PC will be popped by the RTE instruction. */
|
||||
"POP R15 \n" \
|
||||
"MVTACLO R15 \n" \
|
||||
"POP R15 \n" \
|
||||
|
|
@ -401,7 +403,7 @@ void vPortTickISR( void )
|
|||
__asm volatile( "SETPSW I" );
|
||||
|
||||
/* Increment the tick, and perform any processing the new tick value
|
||||
* necessitates. Ensure IPL is at the max syscall value first. */
|
||||
necessitates. Ensure IPL is at the max syscall value first. */
|
||||
portDISABLE_INTERRUPTS_FROM_KERNEL_ISR();
|
||||
{
|
||||
if( xTaskIncrementTick() != pdFALSE )
|
||||
|
|
@ -417,7 +419,7 @@ void vPortTickISR( void )
|
|||
ulTickFlag = pdTRUE;
|
||||
|
||||
/* If this is the first tick since exiting tickless mode then the CMT
|
||||
* compare match value needs resetting. */
|
||||
compare match value needs resetting. */
|
||||
CMT0.CMCOR = ( uint16_t ) ulMatchValueForOneTick;
|
||||
}
|
||||
#endif
|
||||
|
|
@ -488,11 +490,11 @@ static void prvSetupTimerInterrupt( void )
|
|||
{
|
||||
CMT0.CMCR.BIT.CKS = 0;
|
||||
}
|
||||
#else /* if portCLOCK_DIVISOR == 512 */
|
||||
#else
|
||||
{
|
||||
#error Invalid portCLOCK_DIVISOR setting
|
||||
}
|
||||
#endif /* if portCLOCK_DIVISOR == 512 */
|
||||
#endif
|
||||
|
||||
/* Enable the interrupt... */
|
||||
_IEN( _CMT0_CMI0 ) = 1;
|
||||
|
|
@ -513,8 +515,8 @@ static void prvSetupTimerInterrupt( void )
|
|||
configPRE_SLEEP_PROCESSING( xExpectedIdleTime );
|
||||
|
||||
/* xExpectedIdleTime being set to 0 by configPRE_SLEEP_PROCESSING()
|
||||
* means the application defined code has already executed the WAIT
|
||||
* instruction. */
|
||||
means the application defined code has already executed the WAIT
|
||||
instruction. */
|
||||
if( xExpectedIdleTime > 0 )
|
||||
{
|
||||
__asm volatile( "WAIT" );
|
||||
|
|
@ -543,41 +545,38 @@ static void prvSetupTimerInterrupt( void )
|
|||
}
|
||||
|
||||
/* Calculate the reload value required to wait xExpectedIdleTime tick
|
||||
* periods. */
|
||||
periods. */
|
||||
ulMatchValue = ulMatchValueForOneTick * xExpectedIdleTime;
|
||||
|
||||
if( ulMatchValue > ulStoppedTimerCompensation )
|
||||
{
|
||||
/* Compensate for the fact that the CMT is going to be stopped
|
||||
* momentarily. */
|
||||
momentarily. */
|
||||
ulMatchValue -= ulStoppedTimerCompensation;
|
||||
}
|
||||
|
||||
/* Stop the CMT momentarily. The time the CMT is stopped for is
|
||||
* accounted for as best it can be, but using the tickless mode will
|
||||
* inevitably result in some tiny drift of the time maintained by the
|
||||
* kernel with respect to calendar time. */
|
||||
accounted for as best it can be, but using the tickless mode will
|
||||
inevitably result in some tiny drift of the time maintained by the
|
||||
kernel with respect to calendar time. */
|
||||
CMT.CMSTR0.BIT.STR0 = 0;
|
||||
|
||||
while( CMT.CMSTR0.BIT.STR0 == 1 )
|
||||
{
|
||||
/* Nothing to do here. */
|
||||
}
|
||||
|
||||
/* Critical section using the global interrupt bit as the i bit is
|
||||
* automatically reset by the WAIT instruction. */
|
||||
automatically reset by the WAIT instruction. */
|
||||
__asm volatile( "CLRPSW i" );
|
||||
|
||||
/* The tick flag is set to false before sleeping. If it is true when
|
||||
* sleep mode is exited then sleep mode was probably exited because the
|
||||
* tick was suppressed for the entire xExpectedIdleTime period. */
|
||||
sleep mode is exited then sleep mode was probably exited because the
|
||||
tick was suppressed for the entire xExpectedIdleTime period. */
|
||||
ulTickFlag = pdFALSE;
|
||||
|
||||
/* If a context switch is pending then abandon the low power entry as
|
||||
* the context switch might have been pended by an external interrupt that
|
||||
* requires processing. */
|
||||
the context switch might have been pended by an external interrupt that
|
||||
requires processing. */
|
||||
eSleepAction = eTaskConfirmSleepModeStatus();
|
||||
|
||||
if( eSleepAction == eAbortSleep )
|
||||
{
|
||||
/* Restart tick. */
|
||||
|
|
@ -596,7 +595,7 @@ static void prvSetupTimerInterrupt( void )
|
|||
SYSTEM.PRCR.WORD = portLOCK_KEY;
|
||||
|
||||
/* Sleep until something happens. Calling prvSleep() will
|
||||
* automatically reset the i bit in the PSW. */
|
||||
automatically reset the i bit in the PSW. */
|
||||
prvSleep( xExpectedIdleTime );
|
||||
|
||||
/* Restart the CMT. */
|
||||
|
|
@ -616,7 +615,7 @@ static void prvSetupTimerInterrupt( void )
|
|||
SYSTEM.PRCR.WORD = portLOCK_KEY;
|
||||
|
||||
/* Adjust the match value to take into account that the current
|
||||
* time slice is already partially complete. */
|
||||
time slice is already partially complete. */
|
||||
ulMatchValue -= ( uint32_t ) CMT0.CMCNT;
|
||||
CMT0.CMCOR = ( uint16_t ) ulMatchValue;
|
||||
|
||||
|
|
@ -625,15 +624,14 @@ static void prvSetupTimerInterrupt( void )
|
|||
CMT.CMSTR0.BIT.STR0 = 1;
|
||||
|
||||
/* Sleep until something happens. Calling prvSleep() will
|
||||
* automatically reset the i bit in the PSW. */
|
||||
automatically reset the i bit in the PSW. */
|
||||
prvSleep( xExpectedIdleTime );
|
||||
|
||||
/* Stop CMT. Again, the time the SysTick is stopped for is
|
||||
* accounted for as best it can be, but using the tickless mode will
|
||||
* inevitably result in some tiny drift of the time maintained by the
|
||||
* kernel with respect to calendar time. */
|
||||
accounted for as best it can be, but using the tickless mode will
|
||||
inevitably result in some tiny drift of the time maintained by the
|
||||
kernel with respect to calendar time. */
|
||||
CMT.CMSTR0.BIT.STR0 = 0;
|
||||
|
||||
while( CMT.CMSTR0.BIT.STR0 == 1 )
|
||||
{
|
||||
/* Nothing to do here. */
|
||||
|
|
@ -644,42 +642,42 @@ static void prvSetupTimerInterrupt( void )
|
|||
if( ulTickFlag != pdFALSE )
|
||||
{
|
||||
/* The tick interrupt has already executed, although because
|
||||
* this function is called with the scheduler suspended the actual
|
||||
* tick processing will not occur until after this function has
|
||||
* exited. Reset the match value with whatever remains of this
|
||||
* tick period. */
|
||||
this function is called with the scheduler suspended the actual
|
||||
tick processing will not occur until after this function has
|
||||
exited. Reset the match value with whatever remains of this
|
||||
tick period. */
|
||||
ulMatchValue = ulMatchValueForOneTick - ulCurrentCount;
|
||||
CMT0.CMCOR = ( uint16_t ) ulMatchValue;
|
||||
|
||||
/* The tick interrupt handler will already have pended the tick
|
||||
* processing in the kernel. As the pending tick will be
|
||||
* processed as soon as this function exits, the tick value
|
||||
* maintained by the tick is stepped forward by one less than the
|
||||
* time spent sleeping. The actual stepping of the tick appears
|
||||
* later in this function. */
|
||||
processing in the kernel. As the pending tick will be
|
||||
processed as soon as this function exits, the tick value
|
||||
maintained by the tick is stepped forward by one less than the
|
||||
time spent sleeping. The actual stepping of the tick appears
|
||||
later in this function. */
|
||||
ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Something other than the tick interrupt ended the sleep.
|
||||
* How many complete tick periods passed while the processor was
|
||||
* sleeping? */
|
||||
How many complete tick periods passed while the processor was
|
||||
sleeping? */
|
||||
ulCompleteTickPeriods = ulCurrentCount / ulMatchValueForOneTick;
|
||||
|
||||
/* The match value is set to whatever fraction of a single tick
|
||||
* period remains. */
|
||||
period remains. */
|
||||
ulMatchValue = ulCurrentCount - ( ulCompleteTickPeriods * ulMatchValueForOneTick );
|
||||
CMT0.CMCOR = ( uint16_t ) ulMatchValue;
|
||||
}
|
||||
|
||||
/* Restart the CMT so it runs up to the match value. The match value
|
||||
* will get set to the value required to generate exactly one tick period
|
||||
* the next time the CMT interrupt executes. */
|
||||
will get set to the value required to generate exactly one tick period
|
||||
the next time the CMT interrupt executes. */
|
||||
CMT0.CMCNT = 0;
|
||||
CMT.CMSTR0.BIT.STR0 = 1;
|
||||
|
||||
/* Wind the tick forward by the number of tick periods that the CPU
|
||||
* remained in a low power state. */
|
||||
remained in a low power state. */
|
||||
vTaskStepTick( ulCompleteTickPeriods );
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@
|
|||
*/
|
||||
|
||||
/* Type definitions - these are a bit legacy and not really used now, other than
|
||||
* portSTACK_TYPE and portBASE_TYPE. */
|
||||
portSTACK_TYPE and portBASE_TYPE. */
|
||||
#define portCHAR char
|
||||
#define portFLOAT float
|
||||
#define portDOUBLE double
|
||||
|
|
@ -65,7 +65,7 @@
|
|||
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
|
||||
|
||||
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
|
||||
* not need to be guarded with a critical section. */
|
||||
not need to be guarded with a critical section. */
|
||||
#define portTICK_TYPE_IS_ATOMIC 1
|
||||
#endif
|
||||
/*-----------------------------------------------------------*/
|
||||
|
|
@ -77,8 +77,8 @@
|
|||
#define portNOP() __asm volatile( "NOP" )
|
||||
|
||||
/* Save clobbered register, set ITU SWINR (at address 0x872E0), read the value
|
||||
* back to ensure it is set before continuing, then restore the clobbered
|
||||
* register. */
|
||||
back to ensure it is set before continuing, then restore the clobbered
|
||||
register. */
|
||||
#define portYIELD() \
|
||||
__asm volatile \
|
||||
( \
|
||||
|
|
@ -91,14 +91,14 @@
|
|||
#define portYIELD_FROM_ISR( x ) if( x != pdFALSE ) { portYIELD(); }
|
||||
|
||||
/* These macros should not be called directly, but through the
|
||||
* taskENTER_CRITICAL() and taskEXIT_CRITICAL() macros. An extra check is
|
||||
* performed if configASSERT() is defined to ensure an assertion handler does not
|
||||
* inadvertently attempt to lower the IPL when the call to assert was triggered
|
||||
* because the IPL value was found to be above configMAX_SYSCALL_INTERRUPT_PRIORITY
|
||||
* when an ISR safe FreeRTOS API function was executed. ISR safe FreeRTOS API
|
||||
* functions are those that end in FromISR. FreeRTOS maintains a separate
|
||||
* interrupt API to ensure API function and interrupt entry is as fast and as
|
||||
* simple as possible. */
|
||||
taskENTER_CRITICAL() and taskEXIT_CRITICAL() macros. An extra check is
|
||||
performed if configASSERT() is defined to ensure an assertion handler does not
|
||||
inadvertently attempt to lower the IPL when the call to assert was triggered
|
||||
because the IPL value was found to be above configMAX_SYSCALL_INTERRUPT_PRIORITY
|
||||
when an ISR safe FreeRTOS API function was executed. ISR safe FreeRTOS API
|
||||
functions are those that end in FromISR. FreeRTOS maintains a separate
|
||||
interrupt API to ensure API function and interrupt entry is as fast and as
|
||||
simple as possible. */
|
||||
#define portENABLE_INTERRUPTS() __asm volatile ( "MVTIPL #0" )
|
||||
#ifdef configASSERT
|
||||
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() configASSERT( ( ulPortGetIPL() <= configMAX_SYSCALL_INTERRUPT_PRIORITY ) )
|
||||
|
|
|
|||
|
|
@ -37,20 +37,24 @@
|
|||
#include "string.h"
|
||||
|
||||
/* Hardware specifics. */
|
||||
#if defined(configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H) && (configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H == 1)
|
||||
#include "platform.h"
|
||||
#else
|
||||
#include "iodefine.h"
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* Tasks should start with interrupts enabled and in Supervisor mode, therefore
|
||||
* PSW is set with U and I set, and PM and IPL clear. */
|
||||
PSW is set with U and I set, and PM and IPL clear. */
|
||||
#define portINITIAL_PSW ( ( StackType_t ) 0x00030000 )
|
||||
#define portINITIAL_FPSW ( ( StackType_t ) 0x00000100 )
|
||||
|
||||
/* These macros allow a critical section to be added around the call to
|
||||
* xTaskIncrementTick(), which is only ever called from interrupts at the kernel
|
||||
* priority - ie a known priority. Therefore these local macros are a slight
|
||||
* optimisation compared to calling the global SET/CLEAR_INTERRUPT_MASK macros,
|
||||
* which would require the old IPL to be read first and stored in a local variable. */
|
||||
xTaskIncrementTick(), which is only ever called from interrupts at the kernel
|
||||
priority - ie a known priority. Therefore these local macros are a slight
|
||||
optimisation compared to calling the global SET/CLEAR_INTERRUPT_MASK macros,
|
||||
which would require the old IPL to be read first and stored in a local variable. */
|
||||
#define portDISABLE_INTERRUPTS_FROM_KERNEL_ISR() __asm volatile ( "MVTIPL %0" ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) )
|
||||
#define portENABLE_INTERRUPTS_FROM_KERNEL_ISR() __asm volatile ( "MVTIPL %0" ::"i"(configKERNEL_INTERRUPT_PRIORITY) )
|
||||
|
||||
|
|
@ -67,12 +71,20 @@ static void prvStartFirstTask( void ) __attribute__( ( naked ) );
|
|||
* restoring of registers). Written in asm code as direct register access is
|
||||
* required.
|
||||
*/
|
||||
#if defined(configTICK_VECTOR)
|
||||
void vSoftwareInterruptISR( void ) __attribute__((naked, vector( R_SECNAME_INTVECTTBL, VECT_ICU_SWINT )));
|
||||
#else
|
||||
void vSoftwareInterruptISR( void ) __attribute__((naked));
|
||||
#endif
|
||||
|
||||
/*
|
||||
* The tick interrupt handler.
|
||||
*/
|
||||
#if defined(configTICK_VECTOR)
|
||||
void vTickISR( void ) __attribute__((interrupt( R_SECNAME_INTVECTTBL, _VECT( configTICK_VECTOR ) )));
|
||||
#else
|
||||
void vTickISR( void ) __attribute__((interrupt));
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
|
|
@ -83,9 +95,7 @@ extern void * pxCurrentTCB;
|
|||
/*
|
||||
* See header file for description.
|
||||
*/
|
||||
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
|
||||
TaskFunction_t pxCode,
|
||||
void * pvParameters )
|
||||
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
|
||||
{
|
||||
/* R0 is not included as it is the stack pointer. */
|
||||
|
||||
|
|
@ -96,8 +106,8 @@ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
|
|||
*pxTopOfStack = ( StackType_t ) pxCode;
|
||||
|
||||
/* When debugging it can be useful if every register is set to a known
|
||||
* value. Otherwise code space can be saved by just setting the registers
|
||||
* that need to be set. */
|
||||
value. Otherwise code space can be saved by just setting the registers
|
||||
that need to be set. */
|
||||
#ifdef USE_FULL_REGISTER_INITIALISATION
|
||||
{
|
||||
pxTopOfStack--;
|
||||
|
|
@ -130,11 +140,11 @@ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
|
|||
*pxTopOfStack = 0x22222222;
|
||||
pxTopOfStack--;
|
||||
}
|
||||
#else /* ifdef USE_FULL_REGISTER_INITIALISATION */
|
||||
#else
|
||||
{
|
||||
pxTopOfStack -= 15;
|
||||
}
|
||||
#endif /* ifdef USE_FULL_REGISTER_INITIALISATION */
|
||||
#endif
|
||||
|
||||
*pxTopOfStack = ( StackType_t ) pvParameters; /* R1 */
|
||||
pxTopOfStack--;
|
||||
|
|
@ -156,8 +166,8 @@ BaseType_t xPortStartScheduler( void )
|
|||
if( pxCurrentTCB != NULL )
|
||||
{
|
||||
/* Call an application function to set up the timer that will generate the
|
||||
* tick interrupt. This way the application can decide which peripheral to
|
||||
* use. A demo application is provided to show a suitable example. */
|
||||
tick interrupt. This way the application can decide which peripheral to
|
||||
use. A demo application is provided to show a suitable example. */
|
||||
vApplicationSetupTimerInterrupt();
|
||||
|
||||
/* Enable the software interrupt. */
|
||||
|
|
@ -181,7 +191,7 @@ BaseType_t xPortStartScheduler( void )
|
|||
void vPortEndScheduler( void )
|
||||
{
|
||||
/* Not implemented in ports where there is nothing to return to.
|
||||
* Artificially force an assert. */
|
||||
Artificially force an assert. */
|
||||
configASSERT( pxCurrentTCB == NULL );
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
|
@ -190,22 +200,19 @@ static void prvStartFirstTask( void )
|
|||
{
|
||||
__asm volatile
|
||||
(
|
||||
|
||||
/* When starting the scheduler there is nothing that needs moving to the
|
||||
* interrupt stack because the function is not called from an interrupt.
|
||||
* Just ensure the current stack is the user stack. */
|
||||
interrupt stack because the function is not called from an interrupt.
|
||||
Just ensure the current stack is the user stack. */
|
||||
"SETPSW U \n" \
|
||||
|
||||
|
||||
/* Obtain the location of the stack associated with which ever task
|
||||
* pxCurrentTCB is currently pointing to. */
|
||||
pxCurrentTCB is currently pointing to. */
|
||||
"MOV.L #_pxCurrentTCB, R15 \n" \
|
||||
"MOV.L [R15], R15 \n" \
|
||||
"MOV.L [R15], R0 \n" \
|
||||
|
||||
|
||||
/* Restore the registers from the stack of the task pointed to by
|
||||
* pxCurrentTCB. */
|
||||
pxCurrentTCB. */
|
||||
"POP R15 \n" \
|
||||
|
||||
/* Accumulator low 32 bits. */
|
||||
|
|
@ -237,11 +244,10 @@ void vSoftwareInterruptISR( void )
|
|||
/* Re-enable interrupts. */
|
||||
"SETPSW I \n" \
|
||||
|
||||
|
||||
/* Move the data that was automatically pushed onto the interrupt stack when
|
||||
* the interrupt occurred from the interrupt stack to the user stack.
|
||||
*
|
||||
* R15 is saved before it is clobbered. */
|
||||
the interrupt occurred from the interrupt stack to the user stack.
|
||||
|
||||
R15 is saved before it is clobbered. */
|
||||
"PUSH.L R15 \n" \
|
||||
|
||||
/* Read the user stack pointer. */
|
||||
|
|
@ -283,9 +289,8 @@ void vSoftwareInterruptISR( void )
|
|||
"MOV.L [ R15 ], R15 \n" \
|
||||
"MOV.L R0, [ R15 ] \n" \
|
||||
|
||||
|
||||
/* Ensure the interrupt mask is set to the syscall priority while the kernel
|
||||
* structures are being accessed. */
|
||||
structures are being accessed. */
|
||||
"MVTIPL %0 \n" \
|
||||
|
||||
/* Select the next task to run. */
|
||||
|
|
@ -294,16 +299,14 @@ void vSoftwareInterruptISR( void )
|
|||
/* Reset the interrupt mask as no more data structure access is required. */
|
||||
"MVTIPL %1 \n" \
|
||||
|
||||
|
||||
/* Load the stack pointer of the task that is now selected as the Running
|
||||
* state task from its TCB. */
|
||||
state task from its TCB. */
|
||||
"MOV.L #_pxCurrentTCB,R15 \n" \
|
||||
"MOV.L [ R15 ], R15 \n" \
|
||||
"MOV.L [ R15 ], R0 \n" \
|
||||
|
||||
|
||||
/* Restore the context of the new task. The PSW (Program Status Word) and
|
||||
* PC will be popped by the RTE instruction. */
|
||||
PC will be popped by the RTE instruction. */
|
||||
"POP R15 \n" \
|
||||
"MVTACLO R15 \n" \
|
||||
"POP R15 \n" \
|
||||
|
|
@ -325,7 +328,7 @@ void vTickISR( void )
|
|||
__asm volatile( "SETPSW I" );
|
||||
|
||||
/* Increment the tick, and perform any processing the new tick value
|
||||
* necessitates. Ensure IPL is at the max syscall value first. */
|
||||
necessitates. Ensure IPL is at the max syscall value first. */
|
||||
portDISABLE_INTERRUPTS_FROM_KERNEL_ISR();
|
||||
{
|
||||
if( xTaskIncrementTick() != pdFALSE )
|
||||
|
|
@ -353,6 +356,9 @@ uint32_t ulPortGetIPL( void )
|
|||
|
||||
void vPortSetIPL( uint32_t ulNewIPL )
|
||||
{
|
||||
/* Avoid compiler warning about unreferenced parameter. */
|
||||
( void ) ulNewIPL;
|
||||
|
||||
__asm volatile
|
||||
(
|
||||
"PUSH R5 \n" \
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@
|
|||
*/
|
||||
|
||||
/* Type definitions - these are a bit legacy and not really used now, other than
|
||||
* portSTACK_TYPE and portBASE_TYPE. */
|
||||
portSTACK_TYPE and portBASE_TYPE. */
|
||||
#define portCHAR char
|
||||
#define portFLOAT float
|
||||
#define portDOUBLE double
|
||||
|
|
@ -65,7 +65,7 @@
|
|||
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
|
||||
|
||||
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
|
||||
* not need to be guarded with a critical section. */
|
||||
not need to be guarded with a critical section. */
|
||||
#define portTICK_TYPE_IS_ATOMIC 1
|
||||
#endif
|
||||
/*-----------------------------------------------------------*/
|
||||
|
|
@ -77,9 +77,9 @@
|
|||
#define portNOP() __asm volatile( "NOP" )
|
||||
|
||||
/* Yield equivalent to "*portITU_SWINTR = 0x01; ( void ) *portITU_SWINTR;"
|
||||
* where portITU_SWINTR is the location of the software interrupt register
|
||||
* (0x000872E0). Don't rely on the assembler to select a register, so instead
|
||||
* save and restore clobbered registers manually. */
|
||||
where portITU_SWINTR is the location of the software interrupt register
|
||||
(0x000872E0). Don't rely on the assembler to select a register, so instead
|
||||
save and restore clobbered registers manually. */
|
||||
#define portYIELD() \
|
||||
__asm volatile \
|
||||
( \
|
||||
|
|
@ -93,14 +93,14 @@
|
|||
#define portYIELD_FROM_ISR( x ) if( x != pdFALSE ) portYIELD()
|
||||
|
||||
/* These macros should not be called directly, but through the
|
||||
* taskENTER_CRITICAL() and taskEXIT_CRITICAL() macros. An extra check is
|
||||
* performed if configASSERT() is defined to ensure an assertion handler does not
|
||||
* inadvertently attempt to lower the IPL when the call to assert was triggered
|
||||
* because the IPL value was found to be above configMAX_SYSCALL_INTERRUPT_PRIORITY
|
||||
* when an ISR safe FreeRTOS API function was executed. ISR safe FreeRTOS API
|
||||
* functions are those that end in FromISR. FreeRTOS maintains a separate
|
||||
* interrupt API to ensure API function and interrupt entry is as fast and as
|
||||
* simple as possible. */
|
||||
taskENTER_CRITICAL() and taskEXIT_CRITICAL() macros. An extra check is
|
||||
performed if configASSERT() is defined to ensure an assertion handler does not
|
||||
inadvertently attempt to lower the IPL when the call to assert was triggered
|
||||
because the IPL value was found to be above configMAX_SYSCALL_INTERRUPT_PRIORITY
|
||||
when an ISR safe FreeRTOS API function was executed. ISR safe FreeRTOS API
|
||||
functions are those that end in FromISR. FreeRTOS maintains a separate
|
||||
interrupt API to ensure API function and interrupt entry is as fast and as
|
||||
simple as possible. */
|
||||
#define portENABLE_INTERRUPTS() __asm volatile ( "MVTIPL #0" )
|
||||
#ifdef configASSERT
|
||||
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() configASSERT( ( ulPortGetIPL() <= configMAX_SYSCALL_INTERRUPT_PRIORITY ) )
|
||||
|
|
|
|||
|
|
@ -37,20 +37,24 @@
|
|||
#include "string.h"
|
||||
|
||||
/* Hardware specifics. */
|
||||
#if defined(configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H) && (configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H == 1)
|
||||
#include "platform.h"
|
||||
#else
|
||||
#include "iodefine.h"
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
/* Tasks should start with interrupts enabled and in Supervisor mode, therefore
|
||||
* PSW is set with U and I set, and PM and IPL clear. */
|
||||
PSW is set with U and I set, and PM and IPL clear. */
|
||||
#define portINITIAL_PSW ( ( StackType_t ) 0x00030000 )
|
||||
#define portINITIAL_FPSW ( ( StackType_t ) 0x00000100 )
|
||||
|
||||
/* These macros allow a critical section to be added around the call to
|
||||
* xTaskIncrementTick(), which is only ever called from interrupts at the kernel
|
||||
* priority - ie a known priority. Therefore these local macros are a slight
|
||||
* optimisation compared to calling the global SET/CLEAR_INTERRUPT_MASK macros,
|
||||
* which would require the old IPL to be read first and stored in a local variable. */
|
||||
xTaskIncrementTick(), which is only ever called from interrupts at the kernel
|
||||
priority - ie a known priority. Therefore these local macros are a slight
|
||||
optimisation compared to calling the global SET/CLEAR_INTERRUPT_MASK macros,
|
||||
which would require the old IPL to be read first and stored in a local variable. */
|
||||
#define portMASK_INTERRUPTS_FROM_KERNEL_ISR() __asm volatile ( "MVTIPL %0" ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) )
|
||||
#define portUNMASK_INTERRUPTS_FROM_KERNEL_ISR() __asm volatile ( "MVTIPL %0" ::"i"(configKERNEL_INTERRUPT_PRIORITY) )
|
||||
|
||||
|
|
@ -67,12 +71,20 @@ static void prvStartFirstTask( void ) __attribute__( ( naked ) );
|
|||
* restoring of registers). Written in asm code as direct register access is
|
||||
* required.
|
||||
*/
|
||||
#if defined(configTICK_VECTOR)
|
||||
void vSoftwareInterruptISR( void ) __attribute__((naked, vector( R_BSP_SECNAME_INTVECTTBL, VECT_ICU_SWINT )));
|
||||
#else
|
||||
void vSoftwareInterruptISR( void ) __attribute__((naked));
|
||||
#endif
|
||||
|
||||
/*
|
||||
* The tick interrupt handler.
|
||||
*/
|
||||
#if defined(configTICK_VECTOR)
|
||||
void vTickISR( void ) __attribute__((interrupt( R_BSP_SECNAME_INTVECTTBL, _VECT( configTICK_VECTOR ) )));
|
||||
#else
|
||||
void vTickISR( void ) __attribute__((interrupt));
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------*/
|
||||
|
||||
|
|
@ -83,9 +95,7 @@ extern void * pxCurrentTCB;
|
|||
/*
|
||||
* See header file for description.
|
||||
*/
|
||||
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
|
||||
TaskFunction_t pxCode,
|
||||
void * pvParameters )
|
||||
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
|
||||
{
|
||||
/* R0 is not included as it is the stack pointer. */
|
||||
|
||||
|
|
@ -96,8 +106,8 @@ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
|
|||
*pxTopOfStack = ( StackType_t ) pxCode;
|
||||
|
||||
/* When debugging it can be useful if every register is set to a known
|
||||
* value. Otherwise code space can be saved by just setting the registers
|
||||
* that need to be set. */
|
||||
value. Otherwise code space can be saved by just setting the registers
|
||||
that need to be set. */
|
||||
#ifdef USE_FULL_REGISTER_INITIALISATION
|
||||
{
|
||||
pxTopOfStack--;
|
||||
|
|
@ -130,11 +140,11 @@ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
|
|||
*pxTopOfStack = 0x22222222;
|
||||
pxTopOfStack--;
|
||||
}
|
||||
#else /* ifdef USE_FULL_REGISTER_INITIALISATION */
|
||||
#else
|
||||
{
|
||||
pxTopOfStack -= 15;
|
||||
}
|
||||
#endif /* ifdef USE_FULL_REGISTER_INITIALISATION */
|
||||
#endif
|
||||
|
||||
*pxTopOfStack = ( StackType_t ) pvParameters; /* R1 */
|
||||
pxTopOfStack--;
|
||||
|
|
@ -164,8 +174,8 @@ BaseType_t xPortStartScheduler( void )
|
|||
if( pxCurrentTCB != NULL )
|
||||
{
|
||||
/* Call an application function to set up the timer that will generate the
|
||||
* tick interrupt. This way the application can decide which peripheral to
|
||||
* use. A demo application is provided to show a suitable example. */
|
||||
tick interrupt. This way the application can decide which peripheral to
|
||||
use. A demo application is provided to show a suitable example. */
|
||||
vApplicationSetupTimerInterrupt();
|
||||
|
||||
/* Enable the software interrupt. */
|
||||
|
|
@ -189,7 +199,7 @@ BaseType_t xPortStartScheduler( void )
|
|||
void vPortEndScheduler( void )
|
||||
{
|
||||
/* Not implemented in ports where there is nothing to return to.
|
||||
* Artificially force an assert. */
|
||||
Artificially force an assert. */
|
||||
configASSERT( pxCurrentTCB == NULL );
|
||||
}
|
||||
/*-----------------------------------------------------------*/
|
||||
|
|
@ -198,22 +208,19 @@ static void prvStartFirstTask( void )
|
|||
{
|
||||
__asm volatile
|
||||
(
|
||||
|
||||
/* When starting the scheduler there is nothing that needs moving to the
|
||||
* interrupt stack because the function is not called from an interrupt.
|
||||
* Just ensure the current stack is the user stack. */
|
||||
interrupt stack because the function is not called from an interrupt.
|
||||
Just ensure the current stack is the user stack. */
|
||||
"SETPSW U \n" \
|
||||
|
||||
|
||||
/* Obtain the location of the stack associated with which ever task
|
||||
* pxCurrentTCB is currently pointing to. */
|
||||
pxCurrentTCB is currently pointing to. */
|
||||
"MOV.L #_pxCurrentTCB, R15 \n" \
|
||||
"MOV.L [R15], R15 \n" \
|
||||
"MOV.L [R15], R0 \n" \
|
||||
|
||||
|
||||
/* Restore the registers from the stack of the task pointed to by
|
||||
* pxCurrentTCB. */
|
||||
pxCurrentTCB. */
|
||||
"POP R15 \n" \
|
||||
|
||||
/* Accumulator low 32 bits. */
|
||||
|
|
@ -261,11 +268,10 @@ void vSoftwareInterruptISR( void )
|
|||
/* Re-enable interrupts. */
|
||||
"SETPSW I \n" \
|
||||
|
||||
|
||||
/* Move the data that was automatically pushed onto the interrupt stack when
|
||||
* the interrupt occurred from the interrupt stack to the user stack.
|
||||
*
|
||||
* R15 is saved before it is clobbered. */
|
||||
the interrupt occurred from the interrupt stack to the user stack.
|
||||
|
||||
R15 is saved before it is clobbered. */
|
||||
"PUSH.L R15 \n" \
|
||||
|
||||
/* Read the user stack pointer. */
|
||||
|
|
@ -312,9 +318,8 @@ void vSoftwareInterruptISR( void )
|
|||
"MOV.L [ R15 ], R15 \n" \
|
||||
"MOV.L R0, [ R15 ] \n" \
|
||||
|
||||
|
||||
/* Ensure the interrupt mask is set to the syscall priority while the kernel
|
||||
* structures are being accessed. */
|
||||
structures are being accessed. */
|
||||
"MVTIPL %0 \n" \
|
||||
|
||||
/* Select the next task to run. */
|
||||
|
|
@ -323,16 +328,14 @@ void vSoftwareInterruptISR( void )
|
|||
/* Reset the interrupt mask as no more data structure access is required. */
|
||||
"MVTIPL %1 \n" \
|
||||
|
||||
|
||||
/* Load the stack pointer of the task that is now selected as the Running
|
||||
* state task from its TCB. */
|
||||
state task from its TCB. */
|
||||
"MOV.L #_pxCurrentTCB,R15 \n" \
|
||||
"MOV.L [ R15 ], R15 \n" \
|
||||
"MOV.L [ R15 ], R0 \n" \
|
||||
|
||||
|
||||
/* Restore the context of the new task. The PSW (Program Status Word) and
|
||||
* PC will be popped by the RTE instruction. */
|
||||
PC will be popped by the RTE instruction. */
|
||||
"POP R15 \n" \
|
||||
|
||||
/* Accumulator low 32 bits. */
|
||||
|
|
@ -374,7 +377,7 @@ void vTickISR( void )
|
|||
__asm volatile( "SETPSW I" );
|
||||
|
||||
/* Increment the tick, and perform any processing the new tick value
|
||||
* necessitates. Ensure IPL is at the max syscall value first. */
|
||||
necessitates. Ensure IPL is at the max syscall value first. */
|
||||
portMASK_INTERRUPTS_FROM_KERNEL_ISR();
|
||||
{
|
||||
if( xTaskIncrementTick() != pdFALSE )
|
||||
|
|
@ -402,6 +405,9 @@ uint32_t ulPortGetIPL( void )
|
|||
|
||||
void vPortSetIPL( uint32_t ulNewIPL )
|
||||
{
|
||||
/* Avoid compiler warning about unreferenced parameter. */
|
||||
( void ) ulNewIPL;
|
||||
|
||||
__asm volatile
|
||||
(
|
||||
"PUSH R5 \n" \
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@
|
|||
*/
|
||||
|
||||
/* Type definitions - these are a bit legacy and not really used now, other than
|
||||
* portSTACK_TYPE and portBASE_TYPE. */
|
||||
portSTACK_TYPE and portBASE_TYPE. */
|
||||
#define portCHAR char
|
||||
#define portFLOAT float
|
||||
#define portDOUBLE double
|
||||
|
|
@ -65,7 +65,7 @@
|
|||
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
|
||||
|
||||
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
|
||||
* not need to be guarded with a critical section. */
|
||||
not need to be guarded with a critical section. */
|
||||
#define portTICK_TYPE_IS_ATOMIC 1
|
||||
#endif
|
||||
/*-----------------------------------------------------------*/
|
||||
|
|
@ -77,9 +77,9 @@
|
|||
#define portNOP() __asm volatile( "NOP" )
|
||||
|
||||
/* Yield equivalent to "*portITU_SWINTR = 0x01; ( void ) *portITU_SWINTR;"
|
||||
* where portITU_SWINTR is the location of the software interrupt register
|
||||
* (0x000872E0). Don't rely on the assembler to select a register, so instead
|
||||
* save and restore clobbered registers manually. */
|
||||
where portITU_SWINTR is the location of the software interrupt register
|
||||
(0x000872E0). Don't rely on the assembler to select a register, so instead
|
||||
save and restore clobbered registers manually. */
|
||||
#define portYIELD() \
|
||||
__asm volatile \
|
||||
( \
|
||||
|
|
@ -93,14 +93,14 @@
|
|||
#define portYIELD_FROM_ISR( x ) if( x != pdFALSE ) portYIELD()
|
||||
|
||||
/* These macros should not be called directly, but through the
|
||||
* taskENTER_CRITICAL() and taskEXIT_CRITICAL() macros. An extra check is
|
||||
* performed if configASSERT() is defined to ensure an assertion handler does not
|
||||
* inadvertently attempt to lower the IPL when the call to assert was triggered
|
||||
* because the IPL value was found to be above configMAX_SYSCALL_INTERRUPT_PRIORITY
|
||||
* when an ISR safe FreeRTOS API function was executed. ISR safe FreeRTOS API
|
||||
* functions are those that end in FromISR. FreeRTOS maintains a separate
|
||||
* interrupt API to ensure API function and interrupt entry is as fast and as
|
||||
* simple as possible. */
|
||||
taskENTER_CRITICAL() and taskEXIT_CRITICAL() macros. An extra check is
|
||||
performed if configASSERT() is defined to ensure an assertion handler does not
|
||||
inadvertently attempt to lower the IPL when the call to assert was triggered
|
||||
because the IPL value was found to be above configMAX_SYSCALL_INTERRUPT_PRIORITY
|
||||
when an ISR safe FreeRTOS API function was executed. ISR safe FreeRTOS API
|
||||
functions are those that end in FromISR. FreeRTOS maintains a separate
|
||||
interrupt API to ensure API function and interrupt entry is as fast and as
|
||||
simple as possible. */
|
||||
#define portENABLE_INTERRUPTS() __asm volatile ( "MVTIPL #0" )
|
||||
#ifdef configASSERT
|
||||
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() configASSERT( ( ulPortGetIPL() <= configMAX_SYSCALL_INTERRUPT_PRIORITY ) )
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue