Removed outdated AVR32 demo.

This commit is contained in:
Richard Barry 2010-06-13 13:53:05 +00:00
parent 61dc1e332a
commit d09fcd3abe
5 changed files with 0 additions and 772 deletions

View file

@ -1,72 +0,0 @@
/*This file is prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
*
* \brief AVR32 UC3 ISP trampoline.
*
* In order to be able to program a project with both BatchISP and JTAGICE mkII
* without having to take the general-purpose fuses into consideration, add this
* file to the project and change the program entry point to _trampoline.
*
* The pre-programmed ISP will be erased if JTAGICE mkII is used.
*
* - Compiler: GNU GCC for AVR32
* - Supported devices: All AVR32UC devices can be used.
*
* \author Atmel Corporation: http://www.atmel.com \n
* Support and FAQ: http://support.atmel.no/
*
******************************************************************************/
/* Copyright (c) 2007, Atmel Corporation All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of ATMEL may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "../conf_isp.h"
//! @{
//! \verbatim
// This must be linked @ 0x80000000 if it is to be run upon reset.
.section .reset, "ax", @progbits
.global _trampoline
.type _trampoline, @function
_trampoline:
// Jump to program start.
rjmp program_start
.org PROGRAM_START_OFFSET
program_start:
// Jump to the C runtime startup routine.
lda.w pc, _stext
//! \endverbatim
//! @}

View file

@ -1,91 +0,0 @@
/*This file is prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
*
* \brief AVR32 UC3 ISP trampoline.
*
* In order to be able to program a project with both BatchISP and JTAGICE mkII
* without having to take the general-purpose fuses into consideration, add this
* file to the project and change the program entry point to __trampoline.
*
* The pre-programmed ISP will be erased if JTAGICE mkII is used.
*
* - Compiler: IAR EWAVR32
* - Supported devices: All AVR32UC devices can be used.
*
* \author Atmel Corporation: http://www.atmel.com \n
* Support and FAQ: http://support.atmel.no/
*
******************************************************************************/
/* Copyright (c) 2007, Atmel Corporation All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of ATMEL may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "../conf_isp.h"
//! @{
//! \verbatim
RSEG SSTACK:DATA:NOROOT(2)
// This must be linked @ 0x80000000 if it is to be run upon reset.
RSEG RESET:CODE:NOROOT(1)
PUBLIC __trampoline
__trampoline:
// Jump to program start.
rjmp program_start
ORG PROGRAM_START_OFFSET
program_start:
// Initialize the stack pointer.
lddpc sp, ??SPS
// Jump to the C runtime startup routine.
lddpc pc, ??cmain
// Constant data area.
ALIGN 2
??SPS:
DC32 SFE(SSTACK) & ~3
EXTERN ?main
??cmain:
DC32 ?main
END
//! \endverbatim
//! @}

View file

@ -1,119 +0,0 @@
/*This file is prepared for Doxygen automatic documentation generation.*/
/*! \file ******************************************************************
*
* \brief ISP configuration file.
*
* This file contains the possible external configuration of the ISP.
*
* - Compiler: IAR EWAVR32 and GNU GCC for AVR32
* - Supported devices: All AVR32 devices with a USB module can be used.
* - AppNote:
*
* \author Atmel Corporation: http://www.atmel.com \n
* Support and FAQ: http://support.atmel.no/
*
***************************************************************************/
/* Copyright (c) 2007, Atmel Corporation All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of ATMEL may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _CONF_ISP_H_
#define _CONF_ISP_H_
#include <avr32/io.h>
#include "compiler.h"
//_____ D E F I N I T I O N S ______________________________________________
#define PRODUCT_MANUFACTURER_ID 0x58
#define PRODUCT_FAMILY_ID 0x20
#define ISP_VERSION 0x00
#define ISP_ID0 0x00
#define ISP_ID1 0x00
#define ISP_GPFB_FORCE 31
#define ISP_GPFB_FORCE_MASK 0x80000000
#define ISP_GPFB_FORCE_OFFSET 31
#define ISP_GPFB_FORCE_SIZE 1
#define ISP_GPFB_IO_COND_EN 30
#define ISP_GPFB_IO_COND_EN_MASK 0x40000000
#define ISP_GPFB_IO_COND_EN_OFFSET 30
#define ISP_GPFB_IO_COND_EN_SIZE 1
#define ISP_GPFB_BOD_EN 29
#define ISP_GPFB_BOD_EN_MASK 0x20000000
#define ISP_GPFB_BOD_EN_OFFSET 29
#define ISP_GPFB_BOD_EN_SIZE 1
#define ISP_CFG (*(volatile U32 *)ISP_CFG_ADDRESS)
#define ISP_CFG_ADDRESS (AVR32_FLASHC_USER_PAGE_ADDRESS + ISP_CFG_OFFSET)
#define ISP_CFG_OFFSET 0x000001FC
#define ISP_CFG_SIZE 4
#define ISP_CFG_BOOT_KEY 17
#define ISP_CFG_BOOT_KEY_MASK 0xFFFE0000
#define ISP_CFG_BOOT_KEY_OFFSET 17
#define ISP_CFG_BOOT_KEY_SIZE 15
#define ISP_CFG_BOOT_KEY_VALUE 0x494F
#define ISP_CFG_IO_COND_LEVEL 16
#define ISP_CFG_IO_COND_LEVEL_MASK 0x00010000
#define ISP_CFG_IO_COND_LEVEL_OFFSET 16
#define ISP_CFG_IO_COND_LEVEL_SIZE 1
#define ISP_CFG_IO_COND_PIN 8
#define ISP_CFG_IO_COND_PIN_MASK 0x0000FF00
#define ISP_CFG_IO_COND_PIN_OFFSET 8
#define ISP_CFG_IO_COND_PIN_SIZE 8
#define ISP_CFG_CRC8 0
#define ISP_CFG_CRC8_MASK 0x000000FF
#define ISP_CFG_CRC8_OFFSET 0
#define ISP_CFG_CRC8_SIZE 8
#define ISP_CFG_CRC8_POLYNOMIAL 0x107
#define ISP_KEY (*(volatile U32 *)ISP_KEY_ADDRESS)
#define ISP_KEY_ADDRESS (AVR32_SRAM_ADDRESS + ISP_KEY_OFFSET)
#define ISP_KEY_OFFSET 0x00000000
#define ISP_KEY_SIZE 4
#define ISP_KEY_VALUE ('I' << 24 | 'S' << 16 | 'P' << 8 | 'K')
#ifndef ISP_OSC
#define ISP_OSC 0
#endif
#define DFU_FRAME_LENGTH 2048
#define PROGRAM_START_ADDRESS (AVR32_FLASH_ADDRESS + PROGRAM_START_OFFSET)
#define PROGRAM_START_OFFSET 0x00002000
#endif // _CONF_ISP_H_