Add Xtensa port

The project file is for Xtensa Xplorer simulator.
Also add tests for one size stream buffer.

FreeRTOS/Source/portable/ThirdParty/XCC/Xtensa/xtensa_config.h

@@ -0,0 +1,182 @@
+/*******************************************************************************
+// Copyright (c) 2003-2015 Cadence Design Systems, Inc.
+//
+// Permission is hereby granted, free of charge, to any person obtaining
+// a copy of this software and associated documentation files (the
+// "Software"), to deal in the Software without restriction, including
+// without limitation the rights to use, copy, modify, merge, publish,
+// distribute, sublicense, and/or sell copies of the Software, and to
+// permit persons to whom the Software is furnished to do so, subject to
+// the following conditions:
+//
+// The above copyright notice and this permission notice shall be included
+// in all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+// EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+// CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+--------------------------------------------------------------------------------
+
+  Configuration-specific information for Xtensa build. This file must be
+  included in FreeRTOSConfig.h to properly set up the config-dependent
+  parameters correctly.
+
+  NOTE: To enable thread-safe C library support, XT_USE_THREAD_SAFE_CLIB must
+  be defined to be > 0 somewhere above or on the command line.
+
+*******************************************************************************/
+
+#ifndef XTENSA_CONFIG_H
+#define XTENSA_CONFIG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <xtensa/hal.h>
+#include <xtensa/config/core.h>
+#include <xtensa/config/system.h>	/* required for XSHAL_CLIB */
+
+#include "xtensa_context.h"
+
+
+/*-----------------------------------------------------------------------------
+*                                 STACK REQUIREMENTS
+*
+* This section defines the minimum stack size, and the extra space required to
+* be allocated for saving coprocessor state and/or C library state information
+* (if thread safety is enabled for the C library). The sizes are in bytes.
+*
+* Stack sizes for individual tasks should be derived from these minima based on
+* the maximum call depth of the task and the maximum level of interrupt nesting.
+* A minimum stack size is defined by XT_STACK_MIN_SIZE. This minimum is based
+* on the requirement for a task that calls nothing else but can be interrupted.
+* This assumes that interrupt handlers do not call more than a few levels deep.
+* If this is not true, i.e. one or more interrupt handlers make deep calls then
+* the minimum must be increased.
+*
+* If the Xtensa processor configuration includes coprocessors, then space is 
+* allocated to save the coprocessor state on the stack.
+*
+* If thread safety is enabled for the C runtime library, (XT_USE_THREAD_SAFE_CLIB
+* is defined) then space is allocated to save the C library context in the TCB.
+* 
+* Allocating insufficient stack space is a common source of hard-to-find errors.
+* During development, it is best to enable the FreeRTOS stack checking features.
+*
+* Usage:
+* 
+* XT_USE_THREAD_SAFE_CLIB -- Define this to a nonzero value to enable thread-safe
+*                            use of the C library. This will require extra stack
+*                            space to be allocated for tasks that use the C library
+*                            reentrant functions. See below for more information.
+* 
+* NOTE: The Xtensa toolchain supports multiple C libraries and not all of them
+* support thread safety. Check your core configuration to see which C library
+* was chosen for your system.
+* 
+* XT_STACK_MIN_SIZE       -- The minimum stack size for any task. It is recommended
+*                            that you do not use a stack smaller than this for any
+*                            task. In case you want to use stacks smaller than this
+*                            size, you must verify that the smaller size(s) will work
+*                            under all operating conditions.
+*
+* XT_STACK_EXTRA          -- The amount of extra stack space to allocate for a task
+*                            that does not make C library reentrant calls. Add this
+*                            to the amount of stack space required by the task itself.
+*
+* XT_STACK_EXTRA_CLIB     -- The amount of space to allocate for C library state.
+*
+-----------------------------------------------------------------------------*/
+
+/* Extra space required for interrupt/exception hooks. */
+#ifdef XT_INTEXC_HOOKS
+  #ifdef __XTENSA_CALL0_ABI__
+    #define STK_INTEXC_EXTRA        0x200
+  #else
+    #define STK_INTEXC_EXTRA        0x180
+  #endif
+#else
+  #define STK_INTEXC_EXTRA          0
+#endif
+
+/* Check C library thread safety support and compute size of C library save area.
+   For the supported libraries, we enable thread safety by default, and this can
+   be overridden from the compiler/make command line. */
+#if (XSHAL_CLIB == XTHAL_CLIB_NEWLIB) || (XSHAL_CLIB == XTHAL_CLIB_XCLIB)
+  #ifndef XT_USE_THREAD_SAFE_CLIB
+    #define XT_USE_THREAD_SAFE_CLIB         1
+  #endif
+#else
+  #define XT_USE_THREAD_SAFE_CLIB           0
+#endif
+
+#if XT_USE_THREAD_SAFE_CLIB > 0u
+  #if XSHAL_CLIB == XTHAL_CLIB_XCLIB
+    #define XT_HAVE_THREAD_SAFE_CLIB        1
+    #if !defined __ASSEMBLER__
+      #include <sys/reent.h>
+      #define XT_CLIB_CONTEXT_AREA_SIZE     ((sizeof(struct _reent) + 15) + (-16))
+      #define XT_CLIB_GLOBAL_PTR            _reent_ptr
+      #define _REENT_INIT_PTR               _init_reent
+      #define _impure_ptr                   _reent_ptr
+
+      void _reclaim_reent(void * ptr);
+    #endif
+  #elif XSHAL_CLIB == XTHAL_CLIB_NEWLIB
+    #define XT_HAVE_THREAD_SAFE_CLIB        1
+    #if !defined __ASSEMBLER__
+      #include <sys/reent.h>
+      #define XT_CLIB_CONTEXT_AREA_SIZE     ((sizeof(struct _reent) + 15) + (-16))
+      #define XT_CLIB_GLOBAL_PTR            _impure_ptr
+    #endif
+  #else
+    #define XT_HAVE_THREAD_SAFE_CLIB        0
+    #error The selected C runtime library is not thread safe.
+  #endif
+#else
+  #define XT_CLIB_CONTEXT_AREA_SIZE         0
+#endif
+
+/*------------------------------------------------------------------------------
+  Extra size -- interrupt frame plus coprocessor save area plus hook space.
+  NOTE: Make sure XT_INTEXC_HOOKS is undefined unless you really need the hooks.
+------------------------------------------------------------------------------*/
+#ifdef __XTENSA_CALL0_ABI__
+  #define XT_XTRA_SIZE            (XT_STK_FRMSZ + STK_INTEXC_EXTRA + 0x10 + XT_CP_SIZE)
+#else
+  #define XT_XTRA_SIZE            (XT_STK_FRMSZ + STK_INTEXC_EXTRA + 0x20 + XT_CP_SIZE)
+#endif
+
+/*------------------------------------------------------------------------------
+  Space allocated for user code -- function calls and local variables.
+  NOTE: This number can be adjusted to suit your needs. You must verify that the
+  amount of space you reserve is adequate for the worst-case conditions in your
+  application.
+  NOTE: The windowed ABI requires more stack, since space has to be reserved
+  for spilling register windows.
+------------------------------------------------------------------------------*/
+#ifdef __XTENSA_CALL0_ABI__
+  #define XT_USER_SIZE            0x200
+#else
+  #define XT_USER_SIZE            0x400
+#endif
+
+/* Minimum recommended stack size. */
+#define XT_STACK_MIN_SIZE         ((XT_XTRA_SIZE + XT_USER_SIZE) / sizeof(unsigned char))
+
+/* OS overhead with and without C library thread context. */
+#define XT_STACK_EXTRA              (XT_XTRA_SIZE)
+#define XT_STACK_EXTRA_CLIB         (XT_XTRA_SIZE + XT_CLIB_CONTEXT_AREA_SIZE)
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* XTENSA_CONFIG_H */
+