len0rd/FreeRTOS-Kernel
1
0
Fork 0
mirror of https://github.com/FreeRTOS/FreeRTOS-Kernel.git synced 2025-08-19 09:38:32 -04:00
Code Issues Projects Releases Packages Wiki Activity

Cortex-M Assert when NVIC implements 8 PRIO bits (#639)

Browse source 
* Cortex-M Assert when NVIC implements 8 PRIO bits

* Fix CM3 ports

* Fix ARM_CM3_MPU

* Fix ARM CM3

* Fix ARM_CM4_MPU

* Fix ARM_CM4

* Fix GCC ARM_CM7

* Fix IAR ARM ports

* Uncrustify changes

* Fix MikroC_ARM_CM4F port

* Fix MikroC_ARM_CM4F port-(2)

* Fix RVDS ARM ports

* Revert changes for Tasking/ARM_CM4F port

* Revert changes for Tasking/ARM_CM4F port-(2)

* Update port.c

Fix GCC/ARM_CM4F port

* Update port.c

* update GCC\ARM_CM4F port

* update port.c

* Assert to check configMAX_SYSCALL_INTERRUPT_PRIORITY is set to higher priority

* Fix merge error: remove duplicate code

* Fix typos

---------

Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
Co-authored-by: Ubuntu <ubuntu@ip-172-31-17-174.ec2.internal>
This commit is contained in:
kar-rahul-aws 2023-03-23 15:06:33 +05:30 • committed by GitHub
parent 9488ba22d8
commit 99797e14e3
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
17 changed files with 826 additions and 387 deletions
Download patch file Download diff file Expand all files Collapse all files

37
portable/GCC/ARM_CM3/port.c Normal file → Executable file
View file

@ -262,6 +262,7 @@ BaseType_t xPortStartScheduler( void )
#if ( configASSERT_DEFINED == 1 )
{
volatile uint32_t ulOriginalPriority;
volatile uint32_t ulImplementedPrioBits = 0;
volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER );
volatile uint8_t ucMaxPriorityValue;
@ -293,20 +294,46 @@ BaseType_t xPortStartScheduler( void )
/* Calculate the maximum acceptable priority group value for the number
* of bits read back. */
ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS;
while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE )
{
ulMaxPRIGROUPValue--;
ulImplementedPrioBits++;
ucMaxPriorityValue <<= ( uint8_t ) 0x01;
}
if( ulImplementedPrioBits == 8 )
{
/* When the hardware implements 8 priority bits, there is no way for
* the software to configure PRIGROUP to not have sub-priorities. As
* a result, the least significant bit is always used for sub-priority
* and there are 128 preemption priorities and 2 sub-priorities.
*
* This may cause some confusion in some cases - for example, if
* configMAX_SYSCALL_INTERRUPT_PRIORITY is set to 5, both 5 and 4
* priority interrupts will be masked in Critical Sections as those
* are at the same preemption priority. This may appear confusing as
* 4 is higher (numerically lower) priority than
* configMAX_SYSCALL_INTERRUPT_PRIORITY and therefore, should not
* have been masked. Instead, if we set configMAX_SYSCALL_INTERRUPT_PRIORITY
* to 4, this confusion does not happen and the behaviour remains the same.
*
* The following assert ensures that the sub-priority bit in the
* configMAX_SYSCALL_INTERRUPT_PRIORITY is clear to avoid the above mentioned
* confusion. */
configASSERT( ( configMAX_SYSCALL_INTERRUPT_PRIORITY & 0x1U ) == 0U );
ulMaxPRIGROUPValue = 0;
}
else
{
ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS - ulImplementedPrioBits;
}
#ifdef __NVIC_PRIO_BITS
{
/* Check the CMSIS configuration that defines the number of
* priority bits matches the number of priority bits actually queried
* from the hardware. */
configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS );
configASSERT( ulImplementedPrioBits == __NVIC_PRIO_BITS );
}
#endif
@ -315,7 +342,7 @@ BaseType_t xPortStartScheduler( void )
/* Check the FreeRTOS configuration that defines the number of
* priority bits matches the number of priority bits actually queried
* from the hardware. */
configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS );
configASSERT( ulImplementedPrioBits == configPRIO_BITS );
}
#endif
@ -756,4 +783,4 @@ __attribute__( ( weak ) ) void vPortSetupTimerInterrupt( void )
configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue );
}
#endif /* configASSERT_DEFINED */
#endif /* configASSERT_DEFINED */