Rename /Demo/MSP430FR5969_LaunchPad to /Demo/MSP430X_MSP430FR5969_LaunchPad for consistency with other MSP430 demo directory names.

Fixed typos in comments repeated in multiple source files.

FreeRTOS/Demo/CORTEX_A5_SAMA5D3x_Xplained_IAR/FreeRTOSConfig.h

@@ -134,24 +134,24 @@ FreeRTOS/Source/tasks.c for limitations. */
 #define configUSE_STATS_FORMATTING_FUNCTIONS	1
 
 /* Cortex-A specific setting:  FPU has 16 (rather than 32) d registers.  See:
-http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-MPUs-without-a-GIC.html */
+http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-proprietary-interrupt-controller.html */
 #define configFPU_D32	0
 
 /* Cortex-A specific setting:  The address of the register within the interrupt
 controller from which the address of the current interrupt's handling function
 can be obtained.  See:
-http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-MPUs-without-a-GIC.html */
+http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-proprietary-interrupt-controller.html */
 #define configINTERRUPT_VECTOR_ADDRESS	0xFFFFF010UL
 
 /* Cortex-A specific setting:  The address of End of Interrupt register within
 the interrupt controller.  See:
-http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-MPUs-without-a-GIC.html */
+http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-proprietary-interrupt-controller.html */
 #define configEOI_ADDRESS	0xFFFFF038UL
 
 /* Cortex-A specific setting: configCLEAR_TICK_INTERRUPT() is a macro that is
 called by the RTOS kernel's tick handler to clear the source of the tick
 interrupt.  See:
-http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-MPUs-without-a-GIC.html */
+http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-proprietary-interrupt-controller.html */
 #define configPIT_PIVR	( *( ( volatile uint32_t * ) 0xFFFFFE38UL ) )
 #define configCLEAR_TICK_INTERRUPT() ( void ) configPIT_PIVR /* Read PIT_PIVR to clear interrupt. */
 

FreeRTOS/Demo/CORTEX_A5_SAMA5D3x_Xplained_IAR/Full_Demo/main_full.c

@@ -225,7 +225,7 @@ static void prvPseudoRandomiser( void *pvParameters );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check task.  If the variables keep incrementing,
-then the register check tasks has not discovered any errors.  If a variable
+then the register check tasks have not discovered any errors.  If a variable
 stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
@@ -233,7 +233,7 @@ volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
 void main_full( void )
 {
-	/* Start all the other standard demo/test tasks.  They have not particular
+	/* Start all the other standard demo/test tasks.  They have no particular
 	functionality, but do demonstrate how to use the FreeRTOS API and test the
 	kernel port. */
 	vStartInterruptQueueTasks();

FreeRTOS/Demo/CORTEX_A5_SAMA5D4x_EK_IAR/FreeRTOSConfig.h

@@ -134,24 +134,24 @@ FreeRTOS/Source/tasks.c for limitations. */
 #define configUSE_STATS_FORMATTING_FUNCTIONS	1
 
 /* Cortex-A specific setting:  FPU has 32 (rather than 16) d registers.  See:
-http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-MPUs-without-a-GIC.html */
+http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-proprietary-interrupt-controller.html */
 #define configFPU_D32	1
 
 /* Cortex-A specific setting:  The address of the register within the interrupt
 controller from which the address of the current interrupt's handling function
 can be obtained.  See:
-http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-MPUs-without-a-GIC.html */
+http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-proprietary-interrupt-controller.html */
 #define configINTERRUPT_VECTOR_ADDRESS	0xFC06E010UL
 
 /* Cortex-A specific setting:  The address of End of Interrupt register within
 the interrupt controller.  See:
-http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-MPUs-without-a-GIC.html */
+http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-proprietary-interrupt-controller.html */
 #define configEOI_ADDRESS	0xFC06E038UL
 
 /* Cortex-A specific setting: configCLEAR_TICK_INTERRUPT() is a macro that is
 called by the RTOS kernel's tick handler to clear the source of the tick
 interrupt.  See:
-http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-MPUs-without-a-GIC.html */
+http://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-proprietary-interrupt-controller.html */
 #define configCLEAR_TICK_INTERRUPT() ( void ) ( *( ( volatile uint32_t * ) 0xFC068638UL ) ) /* Read PIT_PIVR to clear interrupt. */
 
 /* Prevent C code being included in assembly files when the IAR compiler is

FreeRTOS/Demo/CORTEX_A5_SAMA5D4x_EK_IAR/Full_Demo/main_full.c

@@ -225,7 +225,7 @@ static void prvPseudoRandomiser( void *pvParameters );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check task.  If the variables keep incrementing,
-then the register check tasks has not discovered any errors.  If a variable
+then the register check tasks have not discovered any errors.  If a variable
 stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
@@ -233,7 +233,7 @@ volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
 void main_full( void )
 {
-	/* Start all the other standard demo/test tasks.  They have not particular
+	/* Start all the other standard demo/test tasks.  They have no particular
 	functionality, but do demonstrate how to use the FreeRTOS API and test the
 	kernel port. */
 	vStartInterruptQueueTasks();

FreeRTOS/Demo/CORTEX_A9_Cyclone_V_SoC_DK/main_full.c

@@ -214,7 +214,7 @@ static void prvPseudoRandomiser( void *pvParameters );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check task.  If the variables keep incrementing,
-then the register check tasks has not discovered any errors.  If a variable
+then the register check tasks have not discovered any errors.  If a variable
 stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
@@ -222,7 +222,7 @@ volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
 void main_full( void )
 {
-	/* Start all the other standard demo/test tasks.  They have not particular
+	/* Start all the other standard demo/test tasks.  They have no particular
 	functionality, but do demonstrate how to use the FreeRTOS API and test the
 	kernel port. */
 	vStartDynamicPriorityTasks();

FreeRTOS/Demo/CORTEX_A9_RZ_R7S72100_IAR_DS-5/Source/Full-Demo/main_full.c

@@ -257,7 +257,7 @@ extern void vCreateAndVerifySampleFiles( void );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo/src/Full_Demo/main_full.c

@@ -230,7 +230,7 @@ static void prvPseudoRandomiser( void *pvParameters );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check task.  If the variables keep incrementing,
-then the register check tasks has not discovered any errors.  If a variable
+then the register check tasks have not discovered any errors.  If a variable
 stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
@@ -241,7 +241,7 @@ char *pcStatusMessage = "All tasks running without error";
 
 void main_full( void )
 {
-	/* Start all the other standard demo/test tasks.  They have not particular
+	/* Start all the other standard demo/test tasks.  They have no particular
 	functionality, but do demonstrate how to use the FreeRTOS API and test the
 	kernel port. */
 	vStartInterruptQueueTasks();

FreeRTOS/Demo/CORTEX_M0+_Atmel_SAMD20_XPlained/RTOSDemo/src/main-full.c

@@ -180,7 +180,7 @@ void main_full( void );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M0_Infineon_XMC1000_IAR_Keil_GCC/main-full.c

@@ -198,7 +198,7 @@ void main_full( void );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M0_LPC1114_LPCXpresso/RTOSDemo/Source/main-full.c

@@ -172,7 +172,7 @@ void main_full( void );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M0_STM32F0518_IAR/main-full.c

@@ -183,7 +183,7 @@ void main_full( void );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M4F_ATSAM4E_Atmel_Studio/src/main_full.c

@@ -262,7 +262,7 @@ const uint8_t ucMACAddress[ 6 ] = { configMAC_ADDR0, configMAC_ADDR1, configMAC_
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M4F_Infineon_XMC4000_GCC_Dave/main_full.c

@@ -164,7 +164,7 @@ static void prvRegTest2Task( void *pvParameters ) __attribute__((naked));
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M4F_Infineon_XMC4000_IAR/main_full.c

@@ -166,7 +166,7 @@ extern void vRegTest2Task( void *pvParameters );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M4F_Infineon_XMC4000_Keil/main_full.c

@@ -164,7 +164,7 @@ extern void vRegTest2Task( void *pvParameters );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M4F_Infineon_XMC4000_Tasking/main_full.c

@@ -166,7 +166,7 @@ static void vRegTest2Task( void *pvParameters );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M4F_Infineon_XMC4500_GCC_Atollic/src/main_full.c

@@ -175,7 +175,7 @@ static void vRegTest2Task( void *pvParameters ) __attribute__((naked));
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M4F_M0_LPC43xx_Keil/M4/main.c

@@ -206,7 +206,7 @@ static void prvOptionallyCreateComprehensveTestApplication( void );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M4F_MSP432_LaunchPad_IAR_CCS_Keil/Full_Demo/main_full.c

@@ -227,7 +227,7 @@ static void prvConfigureClocks( void );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check task.  If the variables keep incrementing,
-then the register check tasks has not discovered any errors.  If a variable
+then the register check tasks have not discovered any errors.  If a variable
 stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
@@ -243,7 +243,7 @@ void main_full( void )
 	used so set to 0 to make this obvious. */
 	xSerialPortInitMinimal( 0, mainRX_QUEUE_LENGTH );
 
-	/* Start all the other standard demo/test tasks.  They have not particular
+	/* Start all the other standard demo/test tasks.  They have no particular
 	functionality, but do demonstrate how to use the FreeRTOS API and test the
 	kernel port. */
 	vStartInterruptQueueTasks();

FreeRTOS/Demo/CORTEX_M4F_STM32F407ZG-SK/main.c

@@ -252,7 +252,7 @@ static void prvOptionallyCreateComprehensveTestApplication( void );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check software timer.  If the variables keep
-incrementing, then the register check tasks has not discovered any errors.  If
+incrementing, then the register check tasks have not discovered any errors.  If
 a variable stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 

FreeRTOS/Demo/CORTEX_M4_ATSAM4L_Atmel_Studio/src/main_full.c

@@ -161,7 +161,7 @@ void main_full( void )
 {
 TimerHandle_t xCheckTimer = NULL;
 
-	/* Start all the other standard demo/test tasks.  They have not particular
+	/* Start all the other standard demo/test tasks.  They have no particular
 	functionality, but do demonstrate how to use the FreeRTOS API and test the
 	kernel port. */
 	vStartDynamicPriorityTasks();

FreeRTOS/Demo/CORTEX_M7_SAMV71_Xplained_IAR_Keil/Full_Demo/main_full.c

@@ -202,7 +202,7 @@ extern void vRegTest2Implementation( void );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check task.  If the variables keep incrementing,
-then the register check tasks has not discovered any errors.  If a variable
+then the register check tasks have not discovered any errors.  If a variable
 stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
@@ -210,7 +210,7 @@ volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
 void main_full( void )
 {
-	/* Start all the other standard demo/test tasks.  They have not particular
+	/* Start all the other standard demo/test tasks.  They have no particular
 	functionality, but do demonstrate how to use the FreeRTOS API and test the
 	kernel port. */
 	vStartInterruptQueueTasks();

FreeRTOS/Demo/CORTEX_M7_STM32F7_STM32756G-EVAL_IAR_Keil/Full_Demo/main_full.c

@@ -211,7 +211,7 @@ extern void vUSBCommandConsoleStart( uint16_t usStackSize, UBaseType_t uxPriorit
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check task.  If the variables keep incrementing,
-then the register check tasks has not discovered any errors.  If a variable
+then the register check tasks have not discovered any errors.  If a variable
 stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
@@ -219,7 +219,7 @@ volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
 void main_full( void )
 {
-	/* Start all the other standard demo/test tasks.  They have not particular
+	/* Start all the other standard demo/test tasks.  They have no particular
 	functionality, but do demonstrate how to use the FreeRTOS API and test the
 	kernel port. */
 	vStartInterruptQueueTasks();

FreeRTOS/Demo/CORTEX_STM32L152_Discovery_IAR/main_full.c

@@ -167,7 +167,7 @@ TimerHandle_t xCheckTimer = NULL;
 	/* The LCD is only used in the Full demo. */
 	prvConfigureLCD();
 
-	/* Start all the other standard demo/test tasks.  They have not particular
+	/* Start all the other standard demo/test tasks.  They have no particular
 	functionality, but do demonstrate how to use the FreeRTOS API and test the
 	kernel port. */
 	vStartDynamicPriorityTasks();

FreeRTOS/Demo/MicroBlaze_Kintex7_EthernetLite/RTOSDemo/src/Full_Demo/main_full.c

@@ -230,7 +230,7 @@ void vFullDemoIdleHook( void );
 
 /* The following two variables are used to communicate the status of the
 register check tasks to the check task.  If the variables keep incrementing,
-then the register check tasks has not discovered any errors.  If a variable
+then the register check tasks have not discovered any errors.  If a variable
 stops incrementing, then an error has been found. */
 volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
@@ -238,7 +238,7 @@ volatile unsigned long ulRegTest1LoopCounter = 0UL, ulRegTest2LoopCounter = 0UL;
 
 void main_full( void )
 {
-	/* Start all the other standard demo/test tasks.  They have not particular
+	/* Start all the other standard demo/test tasks.  They have no particular
 	functionality, but do demonstrate how to use the FreeRTOS API and test the
 	kernel port. */
 	vStartDynamicPriorityTasks();