len0rd/FreeRTOS-Kernel
1
0
Fork 0
mirror of https://github.com/FreeRTOS/FreeRTOS-Kernel.git synced 2025-08-19 09:38:32 -04:00
Code Issues Projects Releases Packages Wiki Activity

Changes to core code and port layer:

Browse source 
+ Add configASSERT() into ARM Cortex-M ports to check the number of priority
      bit settings.
    + Clear the 'control' register before starting ARM Cortex-M4F ports in case
      the FPU is used before the scheduler is started.  This just saves a few
      bytes on the main stack as it prevents space being left for a later save
      of FPU registers.
    + Added xSemaphoreGetMutexHolderFromISR().
    + Corrected use of portNVIC_PENDSVSET to portNVIC_PENDSVSET_BIT in MPU ports.
This commit is contained in:
Richard Barry 2016-08-16 11:38:58 +00:00
parent bdbf347c22
commit 75ffac21d7
32 changed files with 1196 additions and 215 deletions
Download patch file Download diff file Expand all files Collapse all files

25
FreeRTOS/Source/portable/GCC/ARM_CM4_MPU/port.c
View file

@ -374,6 +374,24 @@ BaseType_t xPortStartScheduler( void )
ucMaxPriorityValue <<= ( uint8_t ) 0x01;
}
#ifdef __NVIC_PRIO_BITS
{
/* Check the CMSIS configuration that defines the number of
priority bits matches the number of priority bits actually queried
from the hardware. */
configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS );
}
#endif
#ifdef configPRIO_BITS
{
/* Check the FreeRTOS configuration that defines the number of
priority bits matches the number of priority bits actually queried
from the hardware. */
configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS );
}
#endif
/* Shift the priority group value back to its position within the AIRCR
register. */
ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT;
@ -407,12 +425,17 @@ BaseType_t xPortStartScheduler( void )
/* Lazy save always. */
*( portFPCCR ) |= portASPEN_AND_LSPEN_BITS;
/* Start the first task. */
/* Start the first task. This also clears the bit that indicates the FPU is
in use in case the FPU was used before the scheduler was started - which
would otherwise result in the unnecessary leaving of space in the SVC stack
for lazy saving of FPU registers. */
__asm volatile(
" ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */
" ldr r0, [r0] \n"
" ldr r0, [r0] \n"
" msr msp, r0 \n" /* Set the msp back to the start of the stack. */
" mov r0, #0 \n" /* Clear the bit that indicates the FPU is in use, see comment above. */
" msr control, r0 \n"
" cpsie i \n" /* Globally enable interrupts. */
" cpsie f \n"
" dsb \n"

4
FreeRTOS/Source/portable/GCC/ARM_CM4_MPU/portmacro.h
View file

@ -173,7 +173,7 @@ typedef struct MPU_SETTINGS
#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL )
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
/*-----------------------------------------------------------*/
@ -246,7 +246,7 @@ not necessary for to use this port. They are defined so the common demo files
/* Set the privilege level to user mode if xRunningPrivileged is false. */
portFORCE_INLINE static void vPortResetPrivilege( BaseType_t xRunningPrivileged )
{
if( xRunningPrivileged != pdTRUE )
if( xRunningPrivileged != pdTRUE )
{
__asm volatile ( " mrs r0, control \n" \
" orr r0, #1 \n" \