Style: uncrusitfy

This commit is contained in:
Alfred Gedeon 2020-07-01 22:27:40 -07:00 committed by alfred gedeon
parent a5dbc2b1de
commit 718178c68a
406 changed files with 108795 additions and 106323 deletions

View file

@ -26,11 +26,11 @@
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,47 +43,47 @@ extern "C" {
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
#endif
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
* not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
#endif
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
/*-----------------------------------------------------------*/
/* Scheduler utilities. */
extern void vPortYield( void );
#define portNVIC_INT_CTRL ( ( volatile uint32_t * ) 0xe000ed04 )
#define portNVIC_PENDSVSET 0x10000000
#define portYIELD() vPortYield()
extern void vPortYield( void );
#define portNVIC_INT_CTRL ( ( volatile uint32_t * ) 0xe000ed04 )
#define portNVIC_PENDSVSET 0x10000000
#define portYIELD() vPortYield()
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) *(portNVIC_INT_CTRL) = portNVIC_PENDSVSET
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) *( portNVIC_INT_CTRL ) = portNVIC_PENDSVSET
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
/*-----------------------------------------------------------*/
@ -93,40 +93,39 @@ extern void vPortYield( void );
* Set basepri to portMAX_SYSCALL_INTERRUPT_PRIORITY without effecting other
* registers. r0 is clobbered.
*/
#define portSET_INTERRUPT_MASK() __set_BASEPRI( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portSET_INTERRUPT_MASK() __set_BASEPRI( configMAX_SYSCALL_INTERRUPT_PRIORITY )
/*
* Set basepri back to 0 without effective other registers.
* r0 is clobbered. FAQ: Setting BASEPRI to 0 is not a bug. Please see
* http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html before disagreeing.
*/
#define portCLEAR_INTERRUPT_MASK() __set_BASEPRI( 0 )
#define portCLEAR_INTERRUPT_MASK() __set_BASEPRI( 0 )
extern uint32_t ulPortSetInterruptMask( void );
extern void vPortClearInterruptMask( uint32_t ulNewMask );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetInterruptMask()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortClearInterruptMask( x )
extern uint32_t ulPortSetInterruptMask( void );
extern void vPortClearInterruptMask( uint32_t ulNewMask );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetInterruptMask()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) vPortClearInterruptMask( x )
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portDISABLE_INTERRUPTS() portSET_INTERRUPT_MASK()
#define portENABLE_INTERRUPTS() portCLEAR_INTERRUPT_MASK()
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
#define portDISABLE_INTERRUPTS() portSET_INTERRUPT_MASK()
#define portENABLE_INTERRUPTS() portCLEAR_INTERRUPT_MASK()
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portNOP()
#define portNOP()
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */