Fix potential memory leak in the Win32 FreeRTOS+TCP network interface initialisation sequence.

Introduce portMEMORY_BARRIER() macro to assist with memory access ordering when suspending the scheduler if link time optimization is used.

FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/WinPCap/NetworkInterface.c

@@ -389,6 +389,8 @@ uint32_t ulNetMask;
 		{
 			printf( "\nAn error occurred setting the packet filter.\n" );
 		}
+
+		pcap_freecode( &xFilterCode );
 	}
 
 	/* Create the buffers used to pass packets between the FreeRTOS simulator

FreeRTOS/Source/include/FreeRTOS.h

@@ -241,6 +241,10 @@ extern "C" {
 	#define configASSERT_DEFINED 1
 #endif
 
+#ifndef portMEMORY_BARRIER
+	#define portMEMORY_BARRIER()
+#endif
+
 /* The timers module relies on xTaskGetSchedulerState(). */
 #if configUSE_TIMERS == 1
 

FreeRTOS/Source/portable/GCC/RISC-V/portASM.S

@@ -25,19 +25,6 @@
  * 1 tab == 4 spaces!
  */
 
-#if __riscv_xlen == 64
-	#error Not implemented yet - change lw to ld, and sw to sd.
-	#define portWORD_SIZE 8
-	#define store_x sd
-	#define load_x ld
-#elif __riscv_xlen == 32
-	#define portWORD_SIZE 4
-	#define store_x sw
-	#define load_x lw
-#else
-	#error Assembler did not define __riscv_xlen
-#endif
-
 /*
  * The FreeRTOS kernel's RISC-V port is split between the the code that is
  * common across all currently supported RISC-V chips (implementations of the
@@ -68,6 +55,18 @@
  * registers.
  *
  */
+#if __riscv_xlen == 64
+    #define portWORD_SIZE 8
+    #define store_x sd
+    #define load_x ld
+#elif __riscv_xlen == 32
+    #define store_x sw
+    #define load_x lw
+    #define portWORD_SIZE 4
+#else
+    #error Assembler did not define __riscv_xlen
+#endif
+
 #include "freertos_risc_v_chip_specific_extensions.h"
 
 /* Check the freertos_risc_v_chip_specific_extensions.h and/or command line

FreeRTOS/Source/portable/GCC/RISC-V/portmacro.h

@@ -44,14 +44,25 @@ extern "C" {
  */
 
 /* Type definitions. */
-#define portSTACK_TYPE	uint32_t
+#if __riscv_xlen == 64
-#define portBASE_TYPE	long
+	#define portSTACK_TYPE	uint64_t
+	#define portBASE_TYPE	int64_t
+	#define portUBASE_TYPE	uint64_t
+	#define portMAX_DELAY ( TickType_t ) 0xffffffffffffffffUL
+#elif __riscv_xlen == 32
+	#define portSTACK_TYPE	uint32_t
+	#define portBASE_TYPE	int32_t
+	#define portUBASE_TYPE	uint32_t
+	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+#else
+	#error Assembler did not define __riscv_xlen
+#endif
+
 
 typedef portSTACK_TYPE StackType_t;
-typedef long BaseType_t;
+typedef portBASE_TYPE BaseType_t;
-typedef unsigned long UBaseType_t;
+typedef portUBASE_TYPE UBaseType_t;
-typedef uint32_t TickType_t;
+typedef portUBASE_TYPE TickType_t;
-#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
 
 /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
 not need to be guarded with a critical section. */

FreeRTOS/Source/tasks.c

@@ -2104,6 +2104,7 @@ void vTaskSuspendAll( void )
 	post in the FreeRTOS support forum before reporting this as a bug! -
 	http://goo.gl/wu4acr */
 	++uxSchedulerSuspended;
+	portMEMORY_BARRIER();
 }
 /*----------------------------------------------------------*/