Add low power timer library source file for the Pearl Gecko demo.

Fix types in comments.

FreeRTOS/Demo/CORTEX_EFM32_Giant_Gecko_Simplicity_Studio/.settings/com.silabs.ide.project.core.prefs

@@ -1,2 +0,0 @@
-copiedFilesOriginState={}
-eclipse.preferences.version=1

FreeRTOS/Demo/CORTEX_EFM32_Giant_Gecko_Simplicity_Studio/Low_Power_Demo/low_power_tick_management_BURTC.c

@@ -220,7 +220,7 @@ TickType_t xModifiableIdleTime;
 		BURTC_CompareSet( 0, ( ulReloadValueForOneTick - ulCountBeforeSleep ) + ulStoppedTimerCompensation );
 		BURTC_Enable( true );
 
-		/* Re-enable interrupts - see comments above the cpsid instruction()
+		/* Re-enable interrupts - see comments above the INT_Enable() call
 		above. */
 		INT_Enable();
 	}
@@ -259,7 +259,7 @@ TickType_t xModifiableIdleTime;
 		ulCountAfterSleep = BURTC_CounterGet();
 		BURTC_Enable( false );
 
-		/* Re-enable interrupts - see comments above the cpsid instruction()
+		/* Re-enable interrupts - see comments above the INT_Enable() call
 		above. */
 		INT_Enable();
 		__asm volatile( "dsb" );

FreeRTOS/Demo/CORTEX_EFM32_Giant_Gecko_Simplicity_Studio/Low_Power_Demo/low_power_tick_management_RTC.c

@@ -244,7 +244,7 @@ TickType_t xModifiableIdleTime;
 		RTC_CompareSet( 0, ( ulReloadValueForOneTick - ulCountBeforeSleep ) + ulStoppedTimerCompensation );
 		RTC_Enable( true );
 
-		/* Re-enable interrupts - see comments above the cpsid instruction()
+		/* Re-enable interrupts - see comments above the INT_Enable() call
 		above. */
 		INT_Enable();
 	}
@@ -283,7 +283,7 @@ TickType_t xModifiableIdleTime;
 		ulCountAfterSleep = RTC_CounterGet();
 		RTC_Enable( false );
 
-		/* Re-enable interrupts - see comments above the cpsid instruction()
+		/* Re-enable interrupts - see comments above the INT_Enable() call
 		above. */
 		INT_Enable();
 		__asm volatile( "dsb" );

FreeRTOS/Demo/CORTEX_EFM32_Pearl_Gecko_Simplicity_Studio/FreeRTOSConfig.h

@@ -98,7 +98,7 @@ extern "C" {
  *  See the comments at the top of main.c, main_full.c and main_low_power.c for
  *  more information.
  */
-#define configCREATE_LOW_POWER_DEMO	0
+#define configCREATE_LOW_POWER_DEMO		0
 
 /* Some configuration is dependent on the demo being built. */
 #if( configCREATE_LOW_POWER_DEMO == 0 )

FreeRTOS/Demo/CORTEX_EFM32_Pearl_Gecko_Simplicity_Studio/SiLabs_Source/emlib/em_letimer.c

@@ -0,0 +1,544 @@
+/***************************************************************************//**
+ * @file em_letimer.c
+ * @brief Low Energy Timer (LETIMER) Peripheral API
+ * @version 4.2.1
+ *******************************************************************************
+ * @section License
+ * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
+ *******************************************************************************
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no
+ * obligation to support this Software. Silicon Labs is providing the
+ * Software "AS IS", with no express or implied warranties of any kind,
+ * including, but not limited to, any implied warranties of merchantability
+ * or fitness for any particular purpose or warranties against infringement
+ * of any proprietary rights of a third party.
+ *
+ * Silicon Labs will not be liable for any consequential, incidental, or
+ * special damages, or any other relief, or for any claim by any third party,
+ * arising from your use of this Software.
+ *
+ ******************************************************************************/
+
+#include "em_letimer.h"
+#if defined(LETIMER_COUNT) && (LETIMER_COUNT > 0)
+#include "em_cmu.h"
+#include "em_assert.h"
+
+/***************************************************************************//**
+ * @addtogroup EM_Library
+ * @{
+ ******************************************************************************/
+
+/***************************************************************************//**
+ * @addtogroup LETIMER
+ * @brief Low Energy Timer (LETIMER) Peripheral API
+ * @{
+ ******************************************************************************/
+
+/*******************************************************************************
+ *******************************   DEFINES   ***********************************
+ ******************************************************************************/
+
+/** @cond DO_NOT_INCLUDE_WITH_DOXYGEN */
+
+/** Validation of valid comparator register for assert statements. */
+#define LETIMER_COMP_REG_VALID(reg)    (((reg) <= 1))
+
+/** Validation of LETIMER register block pointer reference for assert statements. */
+#define LETIMER_REF_VALID(ref)         ((ref) == LETIMER0)
+
+/** Validation of valid repeat counter register for assert statements. */
+#define LETIMER_REP_REG_VALID(reg)     (((reg) <= 1))
+
+/** @endcond */
+
+
+/*******************************************************************************
+ **************************   LOCAL FUNCTIONS   ********************************
+ ******************************************************************************/
+
+/** @cond DO_NOT_INCLUDE_WITH_DOXYGEN */
+
+#if defined(_EFM32_GECKO_FAMILY)
+/***************************************************************************//**
+ * @brief
+ *   Wait for ongoing sync of register(s) to low frequency domain to complete.
+ *
+ * @note
+ *   This only applies to the Gecko Family, see the reference manual
+ *   chapter about Access to Low Energy Peripherals (Asynchronos Registers)
+ *   for details.
+ *
+ * @param[in] letimer
+ *   Pointer to LETIMER peripheral register block
+ *
+ * @param[in] mask
+ *   Bitmask corresponding to SYNCBUSY register defined bits, indicating
+ *   registers that must complete any ongoing synchronization.
+ ******************************************************************************/
+__STATIC_INLINE void regSync(LETIMER_TypeDef *letimer, uint32_t mask)
+{
+#if defined(_LETIMER_FREEZE_MASK)
+  /* Avoid deadlock if modifying the same register twice when freeze mode is */
+  /* activated. */
+  if (letimer->FREEZE & LETIMER_FREEZE_REGFREEZE)
+    return;
+#endif
+
+  /* Wait for any pending previous write operation to have been completed */
+  /* in low frequency domain, only required for Gecko Family of devices  */
+  while (letimer->SYNCBUSY & mask)
+    ;
+}
+#endif
+
+/** @endcond */
+
+/*******************************************************************************
+ **************************   GLOBAL FUNCTIONS   *******************************
+ ******************************************************************************/
+
+/***************************************************************************//**
+ * @brief
+ *   Get LETIMER compare register value.
+ *
+ * @param[in] letimer
+ *   Pointer to LETIMER peripheral register block
+ *
+ * @param[in] comp
+ *   Compare register to get, either 0 or 1
+ *
+ * @return
+ *   Compare register value, 0 if invalid register selected.
+ ******************************************************************************/
+uint32_t LETIMER_CompareGet(LETIMER_TypeDef *letimer, unsigned int comp)
+{
+  uint32_t ret;
+
+  EFM_ASSERT(LETIMER_REF_VALID(letimer) && LETIMER_COMP_REG_VALID(comp));
+
+  /* Initialize selected compare value */
+  switch (comp)
+  {
+    case 0:
+      ret = letimer->COMP0;
+      break;
+
+    case 1:
+      ret = letimer->COMP1;
+      break;
+
+    default:
+      /* Unknown compare register selected */
+      ret = 0;
+      break;
+  }
+
+  return(ret);
+}
+
+
+/***************************************************************************//**
+ * @brief
+ *   Set LETIMER compare register value.
+ *
+ * @note
+ *   The setting of a compare register requires synchronization into the
+ *   low frequency domain. If the same register is modified before a previous
+ *   update has completed, this function will stall until the previous
+ *   synchronization has completed. This only applies to the Gecko Family, see
+ *   comment in the LETIMER_Sync() internal function call.
+ *
+ * @param[in] letimer
+ *   Pointer to LETIMER peripheral register block
+ *
+ * @param[in] comp
+ *   Compare register to set, either 0 or 1
+ *
+ * @param[in] value
+ *   Initialization value (<= 0x0000ffff)
+ ******************************************************************************/
+void LETIMER_CompareSet(LETIMER_TypeDef *letimer,
+                        unsigned int comp,
+                        uint32_t value)
+{
+  volatile uint32_t *compReg;
+
+  EFM_ASSERT(LETIMER_REF_VALID(letimer)
+             && LETIMER_COMP_REG_VALID(comp)
+             && ((value & ~(_LETIMER_COMP0_COMP0_MASK
+                            >> _LETIMER_COMP0_COMP0_SHIFT))
+                 == 0));
+
+  /* Initialize selected compare value */
+  switch (comp)
+  {
+    case 0:
+      compReg  = &(letimer->COMP0);
+      break;
+
+    case 1:
+      compReg  = &(letimer->COMP1);
+      break;
+
+    default:
+      /* Unknown compare register selected, abort */
+      return;
+  }
+
+#if defined(_EFM32_GECKO_FAMILY)
+  /* LF register about to be modified require sync. busy check */
+  regSync(letimer, comp ? LETIMER_SYNCBUSY_COMP1 : LETIMER_SYNCBUSY_COMP0);
+#endif
+
+  *compReg = value;
+}
+
+
+/***************************************************************************//**
+ * @brief
+ *   Start/stop LETIMER.
+ *
+ * @note
+ *   The enabling/disabling of the LETIMER modifies the LETIMER CMD register
+ *   which requires synchronization into the low frequency domain. If this
+ *   register is modified before a previous update to the same register has
+ *   completed, this function will stall until the previous synchronization has
+ *   completed. This only applies to the Gecko Family, see comment in the
+ *   LETIMER_Sync() internal function call.
+ *
+ * @param[in] letimer
+ *   Pointer to LETIMER peripheral register block.
+ *
+ * @param[in] enable
+ *   true to enable counting, false to disable.
+ ******************************************************************************/
+void LETIMER_Enable(LETIMER_TypeDef *letimer, bool enable)
+{
+  EFM_ASSERT(LETIMER_REF_VALID(letimer));
+
+#if defined(_EFM32_GECKO_FAMILY)
+  /* LF register about to be modified require sync. busy check */
+  regSync(letimer, LETIMER_SYNCBUSY_CMD);
+#endif
+
+  if (enable)
+  {
+    letimer->CMD = LETIMER_CMD_START;
+  }
+  else
+  {
+    letimer->CMD = LETIMER_CMD_STOP;
+  }
+}
+
+#if defined(_LETIMER_FREEZE_MASK)
+/***************************************************************************//**
+ * @brief
+ *   LETIMER register synchronization freeze control.
+ *
+ * @details
+ *   Some LETIMER registers require synchronization into the low frequency (LF)
+ *   domain. The freeze feature allows for several such registers to be
+ *   modified before passing them to the LF domain simultaneously (which
+ *   takes place when the freeze mode is disabled).
+ *
+ * @note
+ *   When enabling freeze mode, this function will wait for all current
+ *   ongoing LETIMER synchronization to LF domain to complete (Normally
+ *   synchronization will not be in progress.) However for this reason, when
+ *   using freeze mode, modifications of registers requiring LF synchronization
+ *   should be done within one freeze enable/disable block to avoid unecessary
+ *   stalling.
+ *
+ * @param[in] letimer
+ *   Pointer to LETIMER peripheral register block.
+ *
+ * @param[in] enable
+ *   @li true - enable freeze, modified registers are not propagated to the
+ *       LF domain
+ *   @li false - disables freeze, modified registers are propagated to LF
+ *       domain
+ ******************************************************************************/
+void LETIMER_FreezeEnable(LETIMER_TypeDef *letimer, bool enable)
+{
+  if (enable)
+  {
+    /*
+     * Wait for any ongoing LF synchronization to complete. This is just to
+     * protect against the rare case when a user
+     * - modifies a register requiring LF sync
+     * - then enables freeze before LF sync completed
+     * - then modifies the same register again
+     * since modifying a register while it is in sync progress should be
+     * avoided.
+     */
+    while (letimer->SYNCBUSY)
+      ;
+
+    letimer->FREEZE = LETIMER_FREEZE_REGFREEZE;
+  }
+  else
+  {
+    letimer->FREEZE = 0;
+  }
+}
+#endif /* defined(_LETIMER_FREEZE_MASK) */
+
+/***************************************************************************//**
+ * @brief
+ *   Initialize LETIMER.
+ *
+ * @details
+ *   Note that the compare/repeat values must be set separately with
+ *   LETIMER_CompareSet() and LETIMER_RepeatSet(). That should probably be done
+ *   prior to the use of this function if configuring the LETIMER to start when
+ *   initialization is completed.
+ *
+ * @note
+ *   The initialization of the LETIMER modifies the LETIMER CTRL/CMD registers
+ *   which require synchronization into the low frequency domain. If any of those
+ *   registers are modified before a previous update to the same register has
+ *   completed, this function will stall until the previous synchronization has
+ *   completed. This only applies to the Gecko Family, see comment in the
+ *   LETIMER_Sync() internal function call.
+ *
+ * @param[in] letimer
+ *   Pointer to LETIMER peripheral register block.
+ *
+ * @param[in] init
+ *   Pointer to LETIMER initialization structure.
+ ******************************************************************************/
+void LETIMER_Init(LETIMER_TypeDef *letimer, const LETIMER_Init_TypeDef *init)
+{
+  uint32_t tmp = 0;
+
+  EFM_ASSERT(LETIMER_REF_VALID(letimer));
+
+  /* Stop timer if specified to be disabled and running */
+  if (!(init->enable) && (letimer->STATUS & LETIMER_STATUS_RUNNING))
+  {
+#if defined(_EFM32_GECKO_FAMILY)
+    /* LF register about to be modified require sync. busy check */
+    regSync(letimer, LETIMER_SYNCBUSY_CMD);
+#endif
+    letimer->CMD = LETIMER_CMD_STOP;
+  }
+
+  /* Configure DEBUGRUN flag, sets whether or not counter should be
+   * updated when debugger is active */
+  if (init->debugRun)
+  {
+    tmp |= LETIMER_CTRL_DEBUGRUN;
+  }
+
+#if defined(LETIMER_CTRL_RTCC0TEN)
+  if (init->rtcComp0Enable)
+  {
+    tmp |= LETIMER_CTRL_RTCC0TEN;
+  }
+
+  if (init->rtcComp1Enable)
+  {
+    tmp |= LETIMER_CTRL_RTCC1TEN;
+  }
+#endif
+
+  if (init->comp0Top)
+  {
+    tmp |= LETIMER_CTRL_COMP0TOP;
+  }
+
+  if (init->bufTop)
+  {
+    tmp |= LETIMER_CTRL_BUFTOP;
+  }
+
+  if (init->out0Pol)
+  {
+    tmp |= LETIMER_CTRL_OPOL0;
+  }
+
+  if (init->out1Pol)
+  {
+    tmp |= LETIMER_CTRL_OPOL1;
+  }
+
+  tmp |= init->ufoa0 << _LETIMER_CTRL_UFOA0_SHIFT;
+  tmp |= init->ufoa1 << _LETIMER_CTRL_UFOA1_SHIFT;
+  tmp |= init->repMode << _LETIMER_CTRL_REPMODE_SHIFT;
+
+#if defined(_EFM32_GECKO_FAMILY)
+  /* LF register about to be modified require sync. busy check */
+  regSync(letimer, LETIMER_SYNCBUSY_CTRL);
+#endif
+  letimer->CTRL = tmp;
+
+  /* Start timer if specified to be enabled and not already running */
+  if (init->enable && !(letimer->STATUS & LETIMER_STATUS_RUNNING))
+  {
+#if defined(_EFM32_GECKO_FAMILY)
+    /* LF register about to be modified require sync. busy check */
+    regSync(letimer, LETIMER_SYNCBUSY_CMD);
+#endif
+    letimer->CMD = LETIMER_CMD_START;
+  }
+}
+
+
+/***************************************************************************//**
+ * @brief
+ *   Get LETIMER repeat register value.
+ *
+ * @param[in] letimer
+ *   Pointer to LETIMER peripheral register block
+ *
+ * @param[in] rep
+ *   Repeat register to get, either 0 or 1
+ *
+ * @return
+ *   Repeat register value, 0 if invalid register selected.
+ ******************************************************************************/
+uint32_t LETIMER_RepeatGet(LETIMER_TypeDef *letimer, unsigned int rep)
+{
+  uint32_t ret;
+
+  EFM_ASSERT(LETIMER_REF_VALID(letimer) && LETIMER_REP_REG_VALID(rep));
+
+  /* Initialize selected compare value */
+  switch (rep)
+  {
+    case 0:
+      ret = letimer->REP0;
+      break;
+
+    case 1:
+      ret = letimer->REP1;
+      break;
+
+    default:
+      /* Unknown compare register selected */
+      ret = 0;
+      break;
+  }
+
+  return(ret);
+}
+
+
+/***************************************************************************//**
+ * @brief
+ *   Set LETIMER repeat counter register value.
+ *
+ * @note
+ *   The setting of a repeat counter register requires synchronization into the
+ *   low frequency domain. If the same register is modified before a previous
+ *   update has completed, this function will stall until the previous
+ *   synchronization has completed. This only applies to the Gecko Family, see
+ *   comment in the LETIMER_Sync() internal function call.
+ *
+ * @param[in] letimer
+ *   Pointer to LETIMER peripheral register block
+ *
+ * @param[in] rep
+ *   Repeat counter register to set, either 0 or 1
+ *
+ * @param[in] value
+ *   Initialization value (<= 0x0000ffff)
+ ******************************************************************************/
+void LETIMER_RepeatSet(LETIMER_TypeDef *letimer,
+                       unsigned int rep,
+                       uint32_t value)
+{
+  volatile uint32_t *repReg;
+#if defined(_EFM32_GECKO_FAMILY)
+  uint32_t          syncbusy;
+#endif
+  EFM_ASSERT(LETIMER_REF_VALID(letimer)
+             && LETIMER_REP_REG_VALID(rep)
+             && ((value & ~(_LETIMER_REP0_REP0_MASK
+                            >> _LETIMER_REP0_REP0_SHIFT))
+                 == 0));
+
+  /* Initialize selected compare value */
+  switch (rep)
+  {
+    case 0:
+      repReg = &(letimer->REP0);
+#if defined(_EFM32_GECKO_FAMILY)
+      syncbusy = LETIMER_SYNCBUSY_REP0;
+#endif
+      break;
+
+    case 1:
+      repReg = &(letimer->REP1);
+#if defined(_EFM32_GECKO_FAMILY)
+      syncbusy = LETIMER_SYNCBUSY_REP1;
+#endif
+      break;
+
+    default:
+      /* Unknown compare register selected, abort */
+      return;
+  }
+
+#if defined(_EFM32_GECKO_FAMILY)
+  /* LF register about to be modified require sync. busy check */
+  regSync(letimer, syncbusy);
+#endif
+
+  *repReg = value;
+}
+
+
+/***************************************************************************//**
+ * @brief
+ *   Reset LETIMER to same state as after a HW reset.
+ *
+ * @note
+ *   The ROUTE register is NOT reset by this function, in order to allow for
+ *   centralized setup of this feature.
+ *
+ * @param[in] letimer
+ *   Pointer to LETIMER peripheral register block.
+ ******************************************************************************/
+void LETIMER_Reset(LETIMER_TypeDef *letimer)
+{
+#if defined(_LETIMER_FREEZE_MASK)
+  /* Freeze registers to avoid stalling for LF synchronization */
+  LETIMER_FreezeEnable(letimer, true);
+#endif
+
+  /* Make sure disabled first, before resetting other registers */
+  letimer->CMD = LETIMER_CMD_STOP | LETIMER_CMD_CLEAR
+                 | LETIMER_CMD_CTO0 | LETIMER_CMD_CTO1;
+  letimer->CTRL  = _LETIMER_CTRL_RESETVALUE;
+  letimer->COMP0 = _LETIMER_COMP0_RESETVALUE;
+  letimer->COMP1 = _LETIMER_COMP1_RESETVALUE;
+  letimer->REP0  = _LETIMER_REP0_RESETVALUE;
+  letimer->REP1  = _LETIMER_REP1_RESETVALUE;
+  letimer->IEN   = _LETIMER_IEN_RESETVALUE;
+  letimer->IFC   = _LETIMER_IFC_MASK;
+  /* Do not reset route register, setting should be done independently */
+
+#if defined(_LETIMER_FREEZE_MASK)
+  /* Unfreeze registers, pass new settings on to LETIMER */
+  LETIMER_FreezeEnable(letimer, false);
+#endif
+}
+
+
+/** @} (end addtogroup LETIMER) */
+/** @} (end addtogroup EM_Library) */
+#endif /* defined(LETIMER_COUNT) && (LETIMER_COUNT > 0) */