Allow RX YRDK demos to work with Rev1 and Rev3 boards, and with any web browser.

Demo/RX600_RX62N-RDK_GNURX/RTOSDemo/ParTest.c

@@ -185,62 +185,62 @@ long lReturn = pdFALSE;
 	{
 		switch( ulLED )
 		{
-			case 0	:	if( LED4 != 0 )
+			case 0	:	if( LED4 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 1	:	if( LED5 != 0 )
+			case 1	:	if( LED5 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 2	:	if( LED6 != 0 )
+			case 2	:	if( LED6 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 3	:	if( LED7 != 0 )
+			case 3	:	if( LED7 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 4	:	if( LED8 != 0 )
+			case 4	:	if( LED8 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 5	:	if( LED9 != 0 )
+			case 5	:	if( LED9 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 6	:	if( LED10 != 0 )
+			case 6	:	if( LED10 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 7	:	if( LED11 != 0 )
+			case 7	:	if( LED11 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 8	:	if( LED12 != 0 )
+			case 8	:	if( LED12 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 9	:	if( LED13 != 0 )
+			case 9	:	if( LED13 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 10	:	if( LED14 != 0 )
+			case 10	:	if( LED14 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 11	:	if( LED15 != 0 )
+			case 11	:	if( LED15 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}

Demo/RX600_RX62N-RDK_GNURX/RTOSDemo/include/yrdkrx62ndef.h

@@ -40,8 +40,14 @@ Macro definitions
 #define     CMT0_CLK_SELECT (512)
 
 /* General Values */
+#ifdef LED_POSITIVE_LOGIC
 	#define		LED_ON          (1) 
 	#define 	LED_OFF			(0)
+#else
+/* LEDs are using NEGATIVE LOGIC... */
+	#define		LED_ON          (0)
+	#define 	LED_OFF			(1)
+#endif
 #define 	SET_BIT_HIGH	(1)
 #define 	SET_BIT_LOW		(0)
 #define 	SET_BYTE_HIGH	(0xFF)

Demo/RX600_RX62N-RDK_GNURX/RTOSDemo/uIP_Task.c

@@ -243,15 +243,19 @@ void vApplicationProcessFormInput( char *pcInputString )
 {
 char *c;
 
-	/* Process the form input sent by the IO page of the served HTML. */
+	/* Only interested in processing form input if this is the IO page. */
+	c = strstr( pcInputString, "io.shtml" );
 	
+	if( c )
+	{
+		/* Is there a command in the string? */
 		c = strstr( pcInputString, "?" );
 	    if( c )
 	    {
 			/* Turn the LED's on or off in accordance with the check box status. */
 			if( strstr( c, "LED0=1" ) != NULL )
 			{
-			/* Turn LEDs on. */
+				/* Turn the LEDs on. */
 				vParTestSetLED( 7, 1 );
 				vParTestSetLED( 8, 1 );
 				vParTestSetLED( 9, 1 );
@@ -259,7 +263,16 @@ char *c;
 			}
 			else
 			{
-			/* Turn LED 4 off. */
+				/* Turn the LEDs off. */
+				vParTestSetLED( 7, 0 );
+				vParTestSetLED( 8, 0 );
+				vParTestSetLED( 9, 0 );
+				vParTestSetLED( 10, 0 );
+			}
+	    }
+		else
+		{
+			/* Commands to turn LEDs off are not always explicit. */
 			vParTestSetLED( 7, 0 );
 			vParTestSetLED( 8, 0 );
 			vParTestSetLED( 9, 0 );

Demo/RX600_RX62N-RDK_IAR/ParTest.c

@@ -185,62 +185,62 @@ long lReturn = pdFALSE;
 	{
 		switch( ulLED )
 		{
-			case 0	:	if( LED4 != 0 )
+			case 0	:	if( LED4 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 1	:	if( LED5 != 0 )
+			case 1	:	if( LED5 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 2	:	if( LED6 != 0 )
+			case 2	:	if( LED6 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 3	:	if( LED7 != 0 )
+			case 3	:	if( LED7 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 4	:	if( LED8 != 0 )
+			case 4	:	if( LED8 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 5	:	if( LED9 != 0 )
+			case 5	:	if( LED9 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 6	:	if( LED10 != 0 )
+			case 6	:	if( LED10 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 7	:	if( LED11 != 0 )
+			case 7	:	if( LED11 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 8	:	if( LED12 != 0 )
+			case 8	:	if( LED12 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 9	:	if( LED13 != 0 )
+			case 9	:	if( LED13 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 10	:	if( LED14 != 0 )
+			case 10	:	if( LED14 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 11	:	if( LED15 != 0 )
+			case 11	:	if( LED15 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}

Demo/RX600_RX62N-RDK_IAR/include/yrdkrx62ndef.h

@@ -40,8 +40,14 @@ Macro definitions
 #define     CMT0_CLK_SELECT (512)
 
 /* General Values */
+#ifdef LED_POSITIVE_LOGIC
 	#define		LED_ON          (1) 
 	#define 	LED_OFF			(0)
+#else
+/* LEDs are using NEGATIVE LOGIC... */
+	#define		LED_ON          (0)
+	#define 	LED_OFF			(1)
+#endif
 #define 	SET_BIT_HIGH	(1)
 #define 	SET_BIT_LOW		(0)
 #define 	SET_BYTE_HIGH	(0xFF)

Demo/RX600_RX62N-RDK_IAR/uIP_Task.c

@@ -243,15 +243,19 @@ void vApplicationProcessFormInput( char *pcInputString )
 {
 char *c;
 
-	/* Process the form input sent by the IO page of the served HTML. */
+	/* Only interested in processing form input if this is the IO page. */
+	c = strstr( pcInputString, "io.shtml" );
 	
+	if( c )
+	{
+		/* Is there a command in the string? */
 		c = strstr( pcInputString, "?" );
 	    if( c )
 	    {
 			/* Turn the LED's on or off in accordance with the check box status. */
 			if( strstr( c, "LED0=1" ) != NULL )
 			{
-			/* Turn LEDs on. */
+				/* Turn the LEDs on. */
 				vParTestSetLED( 7, 1 );
 				vParTestSetLED( 8, 1 );
 				vParTestSetLED( 9, 1 );
@@ -259,7 +263,16 @@ char *c;
 			}
 			else
 			{
-			/* Turn LED 4 off. */
+				/* Turn the LEDs off. */
+				vParTestSetLED( 7, 0 );
+				vParTestSetLED( 8, 0 );
+				vParTestSetLED( 9, 0 );
+				vParTestSetLED( 10, 0 );
+			}
+	    }
+		else
+		{
+			/* Commands to turn LEDs off are not always explicit. */
 			vParTestSetLED( 7, 0 );
 			vParTestSetLED( 8, 0 );
 			vParTestSetLED( 9, 0 );

Demo/RX600_RX62N-RDK_Renesas/RTOSDemo/ParTest.c

@@ -185,62 +185,62 @@ long lReturn = pdFALSE;
 	{
 		switch( ulLED )
 		{
-			case 0	:	if( LED4 != 0 )
+			case 0	:	if( LED4 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 1	:	if( LED5 != 0 )
+			case 1	:	if( LED5 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 2	:	if( LED6 != 0 )
+			case 2	:	if( LED6 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 3	:	if( LED7 != 0 )
+			case 3	:	if( LED7 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 4	:	if( LED8 != 0 )
+			case 4	:	if( LED8 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 5	:	if( LED9 != 0 )
+			case 5	:	if( LED9 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 6	:	if( LED10 != 0 )
+			case 6	:	if( LED10 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 7	:	if( LED11 != 0 )
+			case 7	:	if( LED11 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 8	:	if( LED12 != 0 )
+			case 8	:	if( LED12 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 9	:	if( LED13 != 0 )
+			case 9	:	if( LED13 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 10	:	if( LED14 != 0 )
+			case 10	:	if( LED14 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}
 						break;
-			case 11	:	if( LED15 != 0 )
+			case 11	:	if( LED15 != LED_OFF )
 						{
 							lReturn =  pdTRUE;
 						}

Demo/RX600_RX62N-RDK_Renesas/RTOSDemo/include/yrdkrx62ndef.h

@@ -40,8 +40,14 @@ Macro definitions
 #define     CMT0_CLK_SELECT (512)
 
 /* General Values */
+#ifdef LED_POSITIVE_LOGIC
 	#define		LED_ON          (1) 
 	#define 	LED_OFF			(0)
+#else
+/* LEDs are using NEGATIVE LOGIC... */
+	#define		LED_ON          (0)
+	#define 	LED_OFF			(1)
+#endif
 #define 	SET_BIT_HIGH	(1)
 #define 	SET_BIT_LOW		(0)
 #define 	SET_BYTE_HIGH	(0xFF)

Demo/RX600_RX62N-RDK_Renesas/RTOSDemo/uIP_Task.c

@@ -243,15 +243,19 @@ void vApplicationProcessFormInput( char *pcInputString )
 {
 char *c;
 
-	/* Process the form input sent by the IO page of the served HTML. */
+	/* Only interested in processing form input if this is the IO page. */
+	c = strstr( pcInputString, "io.shtml" );
 	
+	if( c )
+	{
+		/* Is there a command in the string? */
 		c = strstr( pcInputString, "?" );
 	    if( c )
 	    {
 			/* Turn the LED's on or off in accordance with the check box status. */
 			if( strstr( c, "LED0=1" ) != NULL )
 			{
-			/* Turn LEDs on. */
+				/* Turn the LEDs on. */
 				vParTestSetLED( 7, 1 );
 				vParTestSetLED( 8, 1 );
 				vParTestSetLED( 9, 1 );
@@ -259,7 +263,16 @@ char *c;
 			}
 			else
 			{
-			/* Turn LED 4 off. */
+				/* Turn the LEDs off. */
+				vParTestSetLED( 7, 0 );
+				vParTestSetLED( 8, 0 );
+				vParTestSetLED( 9, 0 );
+				vParTestSetLED( 10, 0 );
+			}
+	    }
+		else
+		{
+			/* Commands to turn LEDs off are not always explicit. */
 			vParTestSetLED( 7, 0 );
 			vParTestSetLED( 8, 0 );
 			vParTestSetLED( 9, 0 );

Demo/RX600_RX62N-RSK_GNURX/RTOSDemo/uIP_Task.c

@@ -243,8 +243,12 @@ void vApplicationProcessFormInput( char *pcInputString )
 {
 char *c;
 
-	/* Process the form input sent by the IO page of the served HTML. */
+	/* Only interested in processing form input if this is the IO page. */
+	c = strstr( pcInputString, "io.shtml" );
 	
+	if( c )
+	{
+		/* Is there a command in the string? */
 		c = strstr( pcInputString, "?" );
 		if( c )
 		{
@@ -262,5 +266,12 @@ char *c;
 				vParTestSetLED( 4, 0 );
 			}
 		}
+		else
+		{
+			/* Commands to turn LEDs off are not always explicit, turn LED 4
+			off. */
+			vParTestSetLED( 3, 0 );
+			vParTestSetLED( 4, 0 );
+		}
+	}
 }
-

Demo/RX600_RX62N-RSK_IAR/uIP_Task.c

@@ -243,8 +243,12 @@ void vApplicationProcessFormInput( char *pcInputString )
 {
 char *c;
 
-	/* Process the form input sent by the IO page of the served HTML. */
+	/* Only interested in processing form input if this is the IO page. */
+	c = strstr( pcInputString, "io.shtml" );
 	
+	if( c )
+	{
+		/* Is there a command in the string? */
 		c = strstr( pcInputString, "?" );
 		if( c )
 		{
@@ -262,5 +266,12 @@ char *c;
 				vParTestSetLED( 4, 0 );
 			}
 		}
+		else
+		{
+			/* Commands to turn LEDs off are not always explicit, turn LED 4
+			off. */
+			vParTestSetLED( 3, 0 );
+			vParTestSetLED( 4, 0 );
+		}
+	}
 }
-

Demo/RX600_RX62N-RSK_Renesas/RTOSDemo/uIP_Task.c

@@ -243,8 +243,12 @@ void vApplicationProcessFormInput( char *pcInputString )
 {
 char *c;
 
-	/* Process the form input sent by the IO page of the served HTML. */
+	/* Only interested in processing form input if this is the IO page. */
+	c = strstr( pcInputString, "io.shtml" );
 	
+	if( c )
+	{
+		/* Is there a command in the string? */
 		c = strstr( pcInputString, "?" );
 		if( c )
 		{
@@ -262,5 +266,13 @@ char *c;
 				vParTestSetLED( 4, 0 );
 			}
 		}
+		else
+		{
+			/* Commands to turn LEDs off are not always explicit, turn LED 4
+			off. */
+			vParTestSetLED( 3, 0 );
+			vParTestSetLED( 4, 0 );
+		}
+	}
 }