UpdUpdate IAR projects to use Embedded Workbench V5.11.

Demo/CORTEX_LM3S811_IAR/LM3S811.icf

@@ -0,0 +1,58 @@
+//*****************************************************************************
+//
+// boot_demo1.icf - Linker configuration file for boot_demo1.
+//
+// Copyright (c) 2007 Luminary Micro, Inc.  All rights reserved.
+// Luminary Micro Confidential - For Use Under NDA Only
+//
+//*****************************************************************************
+
+//
+// Define a memory region that covers the entire 4 GB addressible space of the
+// processor.
+//
+define memory mem with size = 4G;
+
+//
+// Define a region for the on-chip flash.
+//
+define region FLASH = mem:[from 0x00000000 to 0x0000ffff];
+
+//
+// Define a region for the on-chip SRAM.
+//
+define region SRAM = mem:[from 0x20000000 to 0x20001fff];
+
+//
+// Define a block for the heap.  The size should be set to something other
+// than zero if things in the C library that require the heap are used.
+//
+define block HEAP with alignment = 8, size = 0x00000000 { };
+
+//
+// Indicate that the read/write values should be initialized by copying from
+// flash.
+//
+initialize by copy { readwrite };
+
+//
+// Initicate that the noinit values should be left alone.  This includes the
+// stack, which if initialized will destroy the return address from the
+// initialization code, causing the processor to branch to zero and fault.
+//
+do not initialize { section .noinit };
+
+//
+// Place the interrupt vectors at the start of flash.
+//
+place at start of FLASH { readonly section .intvec };
+
+//
+// Place the remainder of the read-only items into flash.
+//
+place in FLASH { readonly };
+
+//
+// Place all read/write items into SRAM.
+//
+place in SRAM { readwrite, block HEAP };