len0rd/FreeRTOS-Kernel
1
0
Fork 0
mirror of https://github.com/FreeRTOS/FreeRTOS-Kernel.git synced 2025-09-12 09:07:46 -04:00
Code Issues Projects Releases Packages Wiki Activity

Merge pull request #1 from FreeRTOS/master

Browse source 
sync from master
This commit is contained in:
Eng. Juan Camilo Gómez Cadavid MSc 2020-08-18 12:57:56 -05:00 • committed by GitHub
commit 40bd5ee1c9
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
317 changed files with 76400 additions and 77493 deletions
Download patch file Download diff file Expand all files Collapse all files

5
croutine.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#include "FreeRTOS.h"
@ -202,7 +201,7 @@
{
/* Are there any co-routines waiting to get moved to the ready list? These
* are co-routines that have been readied by an ISR. The ISR cannot access
* the ready lists itself. */
* the ready lists itself. */
while( listLIST_IS_EMPTY( &xPendingReadyCoRoutineList ) == pdFALSE )
{
CRCB_t * pxUnblockedCRCB;
@ -306,7 +305,7 @@
}
/* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the co-routines
* of the same priority get an equal share of the processor time. */
* of the same priority get an equal share of the processor time. */
listGET_OWNER_OF_NEXT_ENTRY( pxCurrentCoRoutine, &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) );
/* Call the co-routine. */

1
event_groups.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/* Standard includes. */

1621
include/FreeRTOS.h
View file

File diff suppressed because it is too large Load diff

1
include/StackMacros.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef STACK_MACROS_H

327
include/atomic.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/**
@ -35,18 +34,20 @@
*/
#ifndef ATOMIC_H
#define ATOMIC_H
#define ATOMIC_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include atomic.h"
#endif
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include atomic.h"
#endif
/* Standard includes. */
#include <stdint.h>
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/*
* Port specific definitions -- entering/exiting critical section.
@ -56,22 +57,22 @@
* ATOMIC_ENTER_CRITICAL().
*
*/
#if defined( portSET_INTERRUPT_MASK_FROM_ISR )
#if defined( portSET_INTERRUPT_MASK_FROM_ISR )
/* Nested interrupt scheme is supported in this port. */
#define ATOMIC_ENTER_CRITICAL() \
#define ATOMIC_ENTER_CRITICAL() \
UBaseType_t uxCriticalSectionType = portSET_INTERRUPT_MASK_FROM_ISR()
#define ATOMIC_EXIT_CRITICAL() \
#define ATOMIC_EXIT_CRITICAL() \
portCLEAR_INTERRUPT_MASK_FROM_ISR( uxCriticalSectionType )
#else
#else
/* Nested interrupt scheme is NOT supported in this port. */
#define ATOMIC_ENTER_CRITICAL() portENTER_CRITICAL()
#define ATOMIC_EXIT_CRITICAL() portEXIT_CRITICAL()
#define ATOMIC_ENTER_CRITICAL() portENTER_CRITICAL()
#define ATOMIC_EXIT_CRITICAL() portEXIT_CRITICAL()
#endif /* portSET_INTERRUPT_MASK_FROM_ISR() */
#endif /* portSET_INTERRUPT_MASK_FROM_ISR() */
/*
* Port specific definition -- "always inline".
@ -80,12 +81,12 @@
* for atomic. Thus, if portFORCE_INLINE is not provided by portmacro.h,
* instead of resulting error, simply define it away.
*/
#ifndef portFORCE_INLINE
#define portFORCE_INLINE
#endif
#ifndef portFORCE_INLINE
#define portFORCE_INLINE
#endif
#define ATOMIC_COMPARE_AND_SWAP_SUCCESS 0x1U /**< Compare and swap succeeded, swapped. */
#define ATOMIC_COMPARE_AND_SWAP_FAILURE 0x0U /**< Compare and swap failed, did not swap. */
#define ATOMIC_COMPARE_AND_SWAP_SUCCESS 0x1U /**< Compare and swap succeeded, swapped. */
#define ATOMIC_COMPARE_AND_SWAP_FAILURE 0x0U /**< Compare and swap failed, did not swap. */
/*----------------------------- Swap && CAS ------------------------------*/
@ -104,28 +105,28 @@
* @note This function only swaps *pulDestination with ulExchange, if previous
* *pulDestination value equals ulComparand.
*/
static portFORCE_INLINE uint32_t Atomic_CompareAndSwap_u32( uint32_t volatile * pulDestination,
uint32_t ulExchange,
uint32_t ulComparand )
static portFORCE_INLINE uint32_t Atomic_CompareAndSwap_u32( uint32_t volatile * pulDestination,
uint32_t ulExchange,
uint32_t ulComparand )
{
uint32_t ulReturnValue;
ATOMIC_ENTER_CRITICAL();
{
uint32_t ulReturnValue;
ATOMIC_ENTER_CRITICAL();
if( *pulDestination == ulComparand )
{
if( *pulDestination == ulComparand )
{
*pulDestination = ulExchange;
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS;
}
else
{
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
}
*pulDestination = ulExchange;
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS;
}
else
{
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
}
ATOMIC_EXIT_CRITICAL();
return ulReturnValue;
}
ATOMIC_EXIT_CRITICAL();
return ulReturnValue;
}
/*-----------------------------------------------------------*/
/**
@ -140,20 +141,20 @@
*
* @return The initial value of *ppvDestination.
*/
static portFORCE_INLINE void * Atomic_SwapPointers_p32( void * volatile * ppvDestination,
void * pvExchange )
static portFORCE_INLINE void * Atomic_SwapPointers_p32( void * volatile * ppvDestination,
void * pvExchange )
{
void * pReturnValue;
ATOMIC_ENTER_CRITICAL();
{
void * pReturnValue;
ATOMIC_ENTER_CRITICAL();
{
pReturnValue = *ppvDestination;
*ppvDestination = pvExchange;
}
ATOMIC_EXIT_CRITICAL();
return pReturnValue;
pReturnValue = *ppvDestination;
*ppvDestination = pvExchange;
}
ATOMIC_EXIT_CRITICAL();
return pReturnValue;
}
/*-----------------------------------------------------------*/
/**
@ -172,24 +173,24 @@
* @note This function only swaps *ppvDestination with pvExchange, if previous
* *ppvDestination value equals pvComparand.
*/
static portFORCE_INLINE uint32_t Atomic_CompareAndSwapPointers_p32( void * volatile * ppvDestination,
void * pvExchange,
void * pvComparand )
static portFORCE_INLINE uint32_t Atomic_CompareAndSwapPointers_p32( void * volatile * ppvDestination,
void * pvExchange,
void * pvComparand )
{
uint32_t ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
ATOMIC_ENTER_CRITICAL();
{
uint32_t ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
ATOMIC_ENTER_CRITICAL();
if( *ppvDestination == pvComparand )
{
if( *ppvDestination == pvComparand )
{
*ppvDestination = pvExchange;
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS;
}
*ppvDestination = pvExchange;
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS;
}
ATOMIC_EXIT_CRITICAL();
return ulReturnValue;
}
ATOMIC_EXIT_CRITICAL();
return ulReturnValue;
}
/*----------------------------- Arithmetic ------------------------------*/
@ -205,20 +206,20 @@
*
* @return previous *pulAddend value.
*/
static portFORCE_INLINE uint32_t Atomic_Add_u32( uint32_t volatile * pulAddend,
uint32_t ulCount )
static portFORCE_INLINE uint32_t Atomic_Add_u32( uint32_t volatile * pulAddend,
uint32_t ulCount )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend += ulCount;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
ulCurrent = *pulAddend;
*pulAddend += ulCount;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
@ -233,20 +234,20 @@
*
* @return previous *pulAddend value.
*/
static portFORCE_INLINE uint32_t Atomic_Subtract_u32( uint32_t volatile * pulAddend,
uint32_t ulCount )
static portFORCE_INLINE uint32_t Atomic_Subtract_u32( uint32_t volatile * pulAddend,
uint32_t ulCount )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend -= ulCount;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
ulCurrent = *pulAddend;
*pulAddend -= ulCount;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
@ -259,19 +260,19 @@
*
* @return *pulAddend value before increment.
*/
static portFORCE_INLINE uint32_t Atomic_Increment_u32( uint32_t volatile * pulAddend )
static portFORCE_INLINE uint32_t Atomic_Increment_u32( uint32_t volatile * pulAddend )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend += 1;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
ulCurrent = *pulAddend;
*pulAddend += 1;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
@ -284,19 +285,19 @@
*
* @return *pulAddend value before decrement.
*/
static portFORCE_INLINE uint32_t Atomic_Decrement_u32( uint32_t volatile * pulAddend )
static portFORCE_INLINE uint32_t Atomic_Decrement_u32( uint32_t volatile * pulAddend )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend -= 1;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
ulCurrent = *pulAddend;
*pulAddend -= 1;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*----------------------------- Bitwise Logical ------------------------------*/
@ -311,20 +312,20 @@
*
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_OR_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
static portFORCE_INLINE uint32_t Atomic_OR_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination |= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
ulCurrent = *pulDestination;
*pulDestination |= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
@ -338,20 +339,20 @@
*
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_AND_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
static portFORCE_INLINE uint32_t Atomic_AND_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination &= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
ulCurrent = *pulDestination;
*pulDestination &= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
@ -365,20 +366,20 @@
*
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_NAND_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
static portFORCE_INLINE uint32_t Atomic_NAND_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination = ~( ulCurrent & ulValue );
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
ulCurrent = *pulDestination;
*pulDestination = ~( ulCurrent & ulValue );
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
}
/*-----------------------------------------------------------*/
/**
@ -392,23 +393,25 @@
*
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_XOR_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
static portFORCE_INLINE uint32_t Atomic_XOR_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination ^= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
ulCurrent = *pulDestination;
*pulDestination ^= ulValue;
}
ATOMIC_EXIT_CRITICAL();
#ifdef __cplusplus
}
#endif
return ulCurrent;
}
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* ATOMIC_H */

85
include/croutine.h
View file

@ -22,40 +22,41 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef CO_ROUTINE_H
#define CO_ROUTINE_H
#define CO_ROUTINE_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include croutine.h"
#endif
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include croutine.h"
#endif
#include "list.h"
#include "list.h"
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/* Used to hide the implementation of the co-routine control block. The
* control block structure however has to be included in the header due to
* the macro implementation of the co-routine functionality. */
typedef void * CoRoutineHandle_t;
typedef void * CoRoutineHandle_t;
/* Defines the prototype to which co-routine functions must conform. */
typedef void (* crCOROUTINE_CODE)( CoRoutineHandle_t,
UBaseType_t );
typedef void (* crCOROUTINE_CODE)( CoRoutineHandle_t,
UBaseType_t );
typedef struct corCoRoutineControlBlock
{
crCOROUTINE_CODE pxCoRoutineFunction;
ListItem_t xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */
ListItem_t xEventListItem; /*< List item used to place the CRCB in event lists. */
UBaseType_t uxPriority; /*< The priority of the co-routine in relation to other co-routines. */
UBaseType_t uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */
uint16_t uxState; /*< Used internally by the co-routine implementation. */
} CRCB_t; /* Co-routine control block. Note must be identical in size down to uxPriority with TCB_t. */
typedef struct corCoRoutineControlBlock
{
crCOROUTINE_CODE pxCoRoutineFunction;
ListItem_t xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */
ListItem_t xEventListItem; /*< List item used to place the CRCB in event lists. */
UBaseType_t uxPriority; /*< The priority of the co-routine in relation to other co-routines. */
UBaseType_t uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */
uint16_t uxState; /*< Used internally by the co-routine implementation. */
} CRCB_t; /* Co-routine control block. Note must be identical in size down to uxPriority with TCB_t. */
/**
* croutine. h
@ -129,9 +130,9 @@
* \defgroup xCoRoutineCreate xCoRoutineCreate
* \ingroup Tasks
*/
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode,
UBaseType_t uxPriority,
UBaseType_t uxIndex );
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode,
UBaseType_t uxPriority,
UBaseType_t uxIndex );
/**
@ -173,7 +174,7 @@
* \defgroup vCoRoutineSchedule vCoRoutineSchedule
* \ingroup Tasks
*/
void vCoRoutineSchedule( void );
void vCoRoutineSchedule( void );
/**
* croutine. h
@ -204,7 +205,7 @@
* \defgroup crSTART crSTART
* \ingroup Tasks
*/
#define crSTART( pxCRCB ) \
#define crSTART( pxCRCB ) \
switch( ( ( CRCB_t * ) ( pxCRCB ) )->uxState ) { \
case 0:
@ -237,16 +238,16 @@
* \defgroup crSTART crSTART
* \ingroup Tasks
*/
#define crEND() }
#define crEND() }
/*
* These macros are intended for internal use by the co-routine implementation
* only. The macros should not be used directly by application writers.
*/
#define crSET_STATE0( xHandle ) \
#define crSET_STATE0( xHandle ) \
( ( CRCB_t * ) ( xHandle ) )->uxState = ( __LINE__ * 2 ); return; \
case ( __LINE__ * 2 ):
#define crSET_STATE1( xHandle ) \
#define crSET_STATE1( xHandle ) \
( ( CRCB_t * ) ( xHandle ) )->uxState = ( ( __LINE__ * 2 ) + 1 ); return; \
case ( ( __LINE__ * 2 ) + 1 ):
@ -296,7 +297,7 @@
* \defgroup crDELAY crDELAY
* \ingroup Tasks
*/
#define crDELAY( xHandle, xTicksToDelay ) \
#define crDELAY( xHandle, xTicksToDelay ) \
if( ( xTicksToDelay ) > 0 ) \
{ \
vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \
@ -386,7 +387,7 @@
* \defgroup crQUEUE_SEND crQUEUE_SEND
* \ingroup Tasks
*/
#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \
#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \
{ \
*( pxResult ) = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
@ -478,7 +479,7 @@
* \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE
* \ingroup Tasks
*/
#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \
#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \
{ \
*( pxResult ) = xQueueCRReceive( ( pxQueue ), ( pvBuffer ), ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
@ -587,7 +588,8 @@
* \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR
* \ingroup Tasks
*/
#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) )
#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) \
xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) )
/**
@ -700,7 +702,8 @@
* \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR
* \ingroup Tasks
*/
#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) )
#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) \
xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) )
/*
* This function is intended for internal use by the co-routine macros only.
@ -711,8 +714,8 @@
* Removes the current co-routine from its ready list and places it in the
* appropriate delayed list.
*/
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay,
List_t * pxEventList );
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay,
List_t * pxEventList );
/*
* This function is intended for internal use by the queue implementation only.
@ -721,10 +724,12 @@
* Removes the highest priority co-routine from the event list and places it in
* the pending ready list.
*/
BaseType_t xCoRoutineRemoveFromEventList( const List_t * pxEventList );
BaseType_t xCoRoutineRemoveFromEventList( const List_t * pxEventList );
#ifdef __cplusplus
}
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* CO_ROUTINE_H */

1
include/deprecated_definitions.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef DEPRECATED_DEFINITIONS_H

1545
include/event_groups.h
View file

File diff suppressed because it is too large Load diff

182
include/list.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*
@ -53,12 +52,13 @@
* \ingroup FreeRTOSIntro
*/
#ifndef INC_FREERTOS_H
#error FreeRTOS.h must be included before list.h
#endif
#ifndef LIST_H
#define LIST_H
#define LIST_H
#ifndef INC_FREERTOS_H
#error "FreeRTOS.h must be included before list.h"
#endif
/*
* The list structure members are modified from within interrupts, and therefore
@ -88,87 +88,89 @@
* FreeRTOSConfig.h (without the quotes):
* "#define configLIST_VOLATILE volatile"
*/
#ifndef configLIST_VOLATILE
#define configLIST_VOLATILE
#endif /* configSUPPORT_CROSS_MODULE_OPTIMISATION */
#ifndef configLIST_VOLATILE
#define configLIST_VOLATILE
#endif /* configSUPPORT_CROSS_MODULE_OPTIMISATION */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/* Macros that can be used to place known values within the list structures,
* then check that the known values do not get corrupted during the execution of
* the application. These may catch the list data structures being overwritten in
* memory. They will not catch data errors caused by incorrect configuration or
* use of FreeRTOS.*/
#if ( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 )
/* Define the macros to do nothing. */
#define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE
#define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE
#define listFIRST_LIST_INTEGRITY_CHECK_VALUE
#define listSECOND_LIST_INTEGRITY_CHECK_VALUE
#define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
#define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
#define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList )
#define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList )
#define listTEST_LIST_ITEM_INTEGRITY( pxItem )
#define listTEST_LIST_INTEGRITY( pxList )
#else /* if ( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 ) */
/* Define macros that add new members into the list structures. */
#define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue1;
#define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue2;
#define listFIRST_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue1;
#define listSECOND_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue2;
#if ( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 )
/* Define the macros to do nothing. */
#define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE
#define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE
#define listFIRST_LIST_INTEGRITY_CHECK_VALUE
#define listSECOND_LIST_INTEGRITY_CHECK_VALUE
#define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
#define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
#define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList )
#define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList )
#define listTEST_LIST_ITEM_INTEGRITY( pxItem )
#define listTEST_LIST_INTEGRITY( pxList )
#else /* if ( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 ) */
/* Define macros that add new members into the list structures. */
#define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue1;
#define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue2;
#define listFIRST_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue1;
#define listSECOND_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue2;
/* Define macros that set the new structure members to known values. */
#define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
#define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
#define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList ) ( pxList )->xListIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
#define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList ) ( pxList )->xListIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
#define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
#define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
#define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList ) ( pxList )->xListIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
#define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList ) ( pxList )->xListIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
/* Define macros that will assert if one of the structure members does not
* contain its expected value. */
#define listTEST_LIST_ITEM_INTEGRITY( pxItem ) configASSERT( ( ( pxItem )->xListItemIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxItem )->xListItemIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
#define listTEST_LIST_INTEGRITY( pxList ) configASSERT( ( ( pxList )->xListIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxList )->xListIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
#endif /* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES */
#define listTEST_LIST_ITEM_INTEGRITY( pxItem ) configASSERT( ( ( pxItem )->xListItemIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxItem )->xListItemIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
#define listTEST_LIST_INTEGRITY( pxList ) configASSERT( ( ( pxList )->xListIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxList )->xListIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
#endif /* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES */
/*
* Definition of the only type of object that a list can contain.
*/
struct xLIST;
struct xLIST_ITEM
{
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE TickType_t xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */
struct xLIST_ITEM * configLIST_VOLATILE pxNext; /*< Pointer to the next ListItem_t in the list. */
struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; /*< Pointer to the previous ListItem_t in the list. */
void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */
struct xLIST * configLIST_VOLATILE pxContainer; /*< Pointer to the list in which this list item is placed (if any). */
listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
};
typedef struct xLIST_ITEM ListItem_t; /* For some reason lint wants this as two separate definitions. */
struct xLIST;
struct xLIST_ITEM
{
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE TickType_t xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */
struct xLIST_ITEM * configLIST_VOLATILE pxNext; /*< Pointer to the next ListItem_t in the list. */
struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; /*< Pointer to the previous ListItem_t in the list. */
void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */
struct xLIST * configLIST_VOLATILE pxContainer; /*< Pointer to the list in which this list item is placed (if any). */
listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
};
typedef struct xLIST_ITEM ListItem_t; /* For some reason lint wants this as two separate definitions. */
struct xMINI_LIST_ITEM
{
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE TickType_t xItemValue;
struct xLIST_ITEM * configLIST_VOLATILE pxNext;
struct xLIST_ITEM * configLIST_VOLATILE pxPrevious;
};
typedef struct xMINI_LIST_ITEM MiniListItem_t;
struct xMINI_LIST_ITEM
{
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE TickType_t xItemValue;
struct xLIST_ITEM * configLIST_VOLATILE pxNext;
struct xLIST_ITEM * configLIST_VOLATILE pxPrevious;
};
typedef struct xMINI_LIST_ITEM MiniListItem_t;
/*
* Definition of the type of queue used by the scheduler.
*/
typedef struct xLIST
{
listFIRST_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
volatile UBaseType_t uxNumberOfItems;
ListItem_t * configLIST_VOLATILE pxIndex; /*< Used to walk through the list. Points to the last item returned by a call to listGET_OWNER_OF_NEXT_ENTRY (). */
MiniListItem_t xListEnd; /*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */
listSECOND_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
} List_t;
typedef struct xLIST
{
listFIRST_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
volatile UBaseType_t uxNumberOfItems;
ListItem_t * configLIST_VOLATILE pxIndex; /*< Used to walk through the list. Points to the last item returned by a call to listGET_OWNER_OF_NEXT_ENTRY (). */
MiniListItem_t xListEnd; /*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */
listSECOND_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
} List_t;
/*
* Access macro to set the owner of a list item. The owner of a list item
@ -177,7 +179,7 @@
* \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER
* \ingroup LinkedList
*/
#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( ( pxListItem )->pvOwner = ( void * ) ( pxOwner ) )
#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( ( pxListItem )->pvOwner = ( void * ) ( pxOwner ) )
/*
* Access macro to get the owner of a list item. The owner of a list item
@ -186,7 +188,7 @@
* \page listGET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER
* \ingroup LinkedList
*/
#define listGET_LIST_ITEM_OWNER( pxListItem ) ( ( pxListItem )->pvOwner )
#define listGET_LIST_ITEM_OWNER( pxListItem ) ( ( pxListItem )->pvOwner )
/*
* Access macro to set the value of the list item. In most cases the value is
@ -195,7 +197,7 @@
* \page listSET_LIST_ITEM_VALUE listSET_LIST_ITEM_VALUE
* \ingroup LinkedList
*/
#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( ( pxListItem )->xItemValue = ( xValue ) )
#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( ( pxListItem )->xItemValue = ( xValue ) )
/*
* Access macro to retrieve the value of the list item. The value can
@ -205,7 +207,7 @@
* \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE
* \ingroup LinkedList
*/
#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue )
#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue )
/*
* Access macro to retrieve the value of the list item at the head of a given
@ -214,7 +216,7 @@
* \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE
* \ingroup LinkedList
*/
#define listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext->xItemValue )
#define listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext->xItemValue )
/*
* Return the list item at the head of the list.
@ -222,7 +224,7 @@
* \page listGET_HEAD_ENTRY listGET_HEAD_ENTRY
* \ingroup LinkedList
*/
#define listGET_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext )
#define listGET_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext )
/*
* Return the next list item.
@ -230,7 +232,7 @@
* \page listGET_NEXT listGET_NEXT
* \ingroup LinkedList
*/
#define listGET_NEXT( pxListItem ) ( ( pxListItem )->pxNext )
#define listGET_NEXT( pxListItem ) ( ( pxListItem )->pxNext )
/*
* Return the list item that marks the end of the list
@ -238,7 +240,7 @@
* \page listGET_END_MARKER listGET_END_MARKER
* \ingroup LinkedList
*/
#define listGET_END_MARKER( pxList ) ( ( ListItem_t const * ) ( &( ( pxList )->xListEnd ) ) )
#define listGET_END_MARKER( pxList ) ( ( ListItem_t const * ) ( &( ( pxList )->xListEnd ) ) )
/*
* Access macro to determine if a list contains any items. The macro will
@ -247,12 +249,12 @@
* \page listLIST_IS_EMPTY listLIST_IS_EMPTY
* \ingroup LinkedList
*/
#define listLIST_IS_EMPTY( pxList ) ( ( ( pxList )->uxNumberOfItems == ( UBaseType_t ) 0 ) ? pdTRUE : pdFALSE )
#define listLIST_IS_EMPTY( pxList ) ( ( ( pxList )->uxNumberOfItems == ( UBaseType_t ) 0 ) ? pdTRUE : pdFALSE )
/*
* Access macro to return the number of items in the list.
*/
#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems )
#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems )
/*
* Access function to obtain the owner of the next entry in a list.
@ -274,7 +276,7 @@
* \page listGET_OWNER_OF_NEXT_ENTRY listGET_OWNER_OF_NEXT_ENTRY
* \ingroup LinkedList
*/
#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \
#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \
{ \
List_t * const pxConstList = ( pxList ); \
/* Increment the index to the next item and return the item, ensuring */ \
@ -304,7 +306,7 @@
* \page listGET_OWNER_OF_HEAD_ENTRY listGET_OWNER_OF_HEAD_ENTRY
* \ingroup LinkedList
*/
#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( ( &( ( pxList )->xListEnd ) )->pxNext->pvOwner )
#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( ( &( ( pxList )->xListEnd ) )->pxNext->pvOwner )
/*
* Check to see if a list item is within a list. The list item maintains a
@ -315,7 +317,7 @@
* @param pxListItem The list item we want to know if is in the list.
* @return pdTRUE if the list item is in the list, otherwise pdFALSE.
*/
#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( ( pxListItem )->pxContainer == ( pxList ) ) ? ( pdTRUE ) : ( pdFALSE ) )
#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( ( pxListItem )->pxContainer == ( pxList ) ) ? ( pdTRUE ) : ( pdFALSE ) )
/*
* Return the list a list item is contained within (referenced from).
@ -323,14 +325,14 @@
* @param pxListItem The list item being queried.
* @return A pointer to the List_t object that references the pxListItem
*/
#define listLIST_ITEM_CONTAINER( pxListItem ) ( ( pxListItem )->pxContainer )
#define listLIST_ITEM_CONTAINER( pxListItem ) ( ( pxListItem )->pxContainer )
/*
* This provides a crude means of knowing if a list has been initialised, as
* pxList->xListEnd.xItemValue is set to portMAX_DELAY by the vListInitialise()
* function.
*/
#define listLIST_IS_INITIALISED( pxList ) ( ( pxList )->xListEnd.xItemValue == portMAX_DELAY )
#define listLIST_IS_INITIALISED( pxList ) ( ( pxList )->xListEnd.xItemValue == portMAX_DELAY )
/*
* Must be called before a list is used! This initialises all the members
@ -342,7 +344,7 @@
* \page vListInitialise vListInitialise
* \ingroup LinkedList
*/
void vListInitialise( List_t * const pxList ) PRIVILEGED_FUNCTION;
void vListInitialise( List_t * const pxList ) PRIVILEGED_FUNCTION;
/*
* Must be called before a list item is used. This sets the list container to
@ -353,7 +355,7 @@
* \page vListInitialiseItem vListInitialiseItem
* \ingroup LinkedList
*/
void vListInitialiseItem( ListItem_t * const pxItem ) PRIVILEGED_FUNCTION;
void vListInitialiseItem( ListItem_t * const pxItem ) PRIVILEGED_FUNCTION;
/*
* Insert a list item into a list. The item will be inserted into the list in
@ -366,8 +368,8 @@
* \page vListInsert vListInsert
* \ingroup LinkedList
*/
void vListInsert( List_t * const pxList,
ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
void vListInsert( List_t * const pxList,
ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
/*
* Insert a list item into a list. The item will be inserted in a position
@ -388,8 +390,8 @@
* \page vListInsertEnd vListInsertEnd
* \ingroup LinkedList
*/
void vListInsertEnd( List_t * const pxList,
ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
void vListInsertEnd( List_t * const pxList,
ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
/*
* Remove an item from a list. The list item has a pointer to the list that
@ -404,10 +406,12 @@
* \page uxListRemove uxListRemove
* \ingroup LinkedList
*/
UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove ) PRIVILEGED_FUNCTION;
UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove ) PRIVILEGED_FUNCTION;
#ifdef __cplusplus
}
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* ifndef LIST_H */

74
include/message_buffer.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
@ -60,18 +59,20 @@
*/
#ifndef FREERTOS_MESSAGE_BUFFER_H
#define FREERTOS_MESSAGE_BUFFER_H
#define FREERTOS_MESSAGE_BUFFER_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include message_buffer.h"
#endif
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include message_buffer.h"
#endif
/* Message buffers are built onto of stream buffers. */
#include "stream_buffer.h"
#include "stream_buffer.h"
#if defined( __cplusplus )
extern "C" {
#endif
/* *INDENT-OFF* */
#if defined( __cplusplus )
extern "C" {
#endif
/* *INDENT-ON* */
/**
* Type by which message buffers are referenced. For example, a call to
@ -79,7 +80,7 @@
* then be used as a parameter to xMessageBufferSend(), xMessageBufferReceive(),
* etc.
*/
typedef void * MessageBufferHandle_t;
typedef void * MessageBufferHandle_t;
/*-----------------------------------------------------------*/
@ -139,7 +140,8 @@
* \defgroup xMessageBufferCreate xMessageBufferCreate
* \ingroup MessageBufferManagement
*/
#define xMessageBufferCreate( xBufferSizeBytes ) ( MessageBufferHandle_t ) xStreamBufferGenericCreate( xBufferSizeBytes, ( size_t ) 0, pdTRUE )
#define xMessageBufferCreate( xBufferSizeBytes ) \
( MessageBufferHandle_t ) xStreamBufferGenericCreate( xBufferSizeBytes, ( size_t ) 0, pdTRUE )
/**
* message_buffer.h
@ -205,7 +207,8 @@
* \defgroup xMessageBufferCreateStatic xMessageBufferCreateStatic
* \ingroup MessageBufferManagement
*/
#define xMessageBufferCreateStatic( xBufferSizeBytes, pucMessageBufferStorageArea, pxStaticMessageBuffer ) ( MessageBufferHandle_t ) xStreamBufferGenericCreateStatic( xBufferSizeBytes, 0, pdTRUE, pucMessageBufferStorageArea, pxStaticMessageBuffer )
#define xMessageBufferCreateStatic( xBufferSizeBytes, pucMessageBufferStorageArea, pxStaticMessageBuffer ) \
( MessageBufferHandle_t ) xStreamBufferGenericCreateStatic( xBufferSizeBytes, 0, pdTRUE, pucMessageBufferStorageArea, pxStaticMessageBuffer )
/**
* message_buffer.h
@ -304,7 +307,8 @@
* \defgroup xMessageBufferSend xMessageBufferSend
* \ingroup MessageBufferManagement
*/
#define xMessageBufferSend( xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait ) xStreamBufferSend( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait )
#define xMessageBufferSend( xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait ) \
xStreamBufferSend( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait )
/**
* message_buffer.h
@ -408,7 +412,8 @@
* \defgroup xMessageBufferSendFromISR xMessageBufferSendFromISR
* \ingroup MessageBufferManagement
*/
#define xMessageBufferSendFromISR( xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken ) xStreamBufferSendFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken )
#define xMessageBufferSendFromISR( xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken ) \
xStreamBufferSendFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken )
/**
* message_buffer.h
@ -496,7 +501,8 @@
* \defgroup xMessageBufferReceive xMessageBufferReceive
* \ingroup MessageBufferManagement
*/
#define xMessageBufferReceive( xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait ) xStreamBufferReceive( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait )
#define xMessageBufferReceive( xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait ) \
xStreamBufferReceive( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait )
/**
@ -597,7 +603,8 @@
* \defgroup xMessageBufferReceiveFromISR xMessageBufferReceiveFromISR
* \ingroup MessageBufferManagement
*/
#define xMessageBufferReceiveFromISR( xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken ) xStreamBufferReceiveFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken )
#define xMessageBufferReceiveFromISR( xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken ) \
xStreamBufferReceiveFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken )
/**
* message_buffer.h
@ -617,7 +624,8 @@
* @param xMessageBuffer The handle of the message buffer to be deleted.
*
*/
#define vMessageBufferDelete( xMessageBuffer ) vStreamBufferDelete( ( StreamBufferHandle_t ) xMessageBuffer )
#define vMessageBufferDelete( xMessageBuffer ) \
vStreamBufferDelete( ( StreamBufferHandle_t ) xMessageBuffer )
/**
* message_buffer.h
@ -634,7 +642,8 @@
* @return If the message buffer referenced by xMessageBuffer is full then
* pdTRUE is returned. Otherwise pdFALSE is returned.
*/
#define xMessageBufferIsFull( xMessageBuffer ) xStreamBufferIsFull( ( StreamBufferHandle_t ) xMessageBuffer )
#define xMessageBufferIsFull( xMessageBuffer ) \
xStreamBufferIsFull( ( StreamBufferHandle_t ) xMessageBuffer )
/**
* message_buffer.h
@ -650,7 +659,8 @@
* pdTRUE is returned. Otherwise pdFALSE is returned.
*
*/
#define xMessageBufferIsEmpty( xMessageBuffer ) xStreamBufferIsEmpty( ( StreamBufferHandle_t ) xMessageBuffer )
#define xMessageBufferIsEmpty( xMessageBuffer ) \
xStreamBufferIsEmpty( ( StreamBufferHandle_t ) xMessageBuffer )
/**
* message_buffer.h
@ -673,7 +683,8 @@
* \defgroup xMessageBufferReset xMessageBufferReset
* \ingroup MessageBufferManagement
*/
#define xMessageBufferReset( xMessageBuffer ) xStreamBufferReset( ( StreamBufferHandle_t ) xMessageBuffer )
#define xMessageBufferReset( xMessageBuffer ) \
xStreamBufferReset( ( StreamBufferHandle_t ) xMessageBuffer )
/**
@ -695,8 +706,10 @@
* \defgroup xMessageBufferSpaceAvailable xMessageBufferSpaceAvailable
* \ingroup MessageBufferManagement
*/
#define xMessageBufferSpaceAvailable( xMessageBuffer ) xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer )
#define xMessageBufferSpacesAvailable( xMessageBuffer ) xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer ) /* Corrects typo in original macro name. */
#define xMessageBufferSpaceAvailable( xMessageBuffer ) \
xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer )
#define xMessageBufferSpacesAvailable( xMessageBuffer ) \
xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer ) /* Corrects typo in original macro name. */
/**
* message_buffer.h
@ -715,7 +728,8 @@
* \defgroup xMessageBufferNextLengthBytes xMessageBufferNextLengthBytes
* \ingroup MessageBufferManagement
*/
#define xMessageBufferNextLengthBytes( xMessageBuffer ) xStreamBufferNextMessageLengthBytes( ( StreamBufferHandle_t ) xMessageBuffer ) PRIVILEGED_FUNCTION;
#define xMessageBufferNextLengthBytes( xMessageBuffer ) \
xStreamBufferNextMessageLengthBytes( ( StreamBufferHandle_t ) xMessageBuffer ) PRIVILEGED_FUNCTION;
/**
* message_buffer.h
@ -754,7 +768,8 @@
* \defgroup xMessageBufferSendCompletedFromISR xMessageBufferSendCompletedFromISR
* \ingroup StreamBufferManagement
*/
#define xMessageBufferSendCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) xStreamBufferSendCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
#define xMessageBufferSendCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) \
xStreamBufferSendCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
/**
* message_buffer.h
@ -794,10 +809,13 @@
* \defgroup xMessageBufferReceiveCompletedFromISR xMessageBufferReceiveCompletedFromISR
* \ingroup StreamBufferManagement
*/
#define xMessageBufferReceiveCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) xStreamBufferReceiveCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
#define xMessageBufferReceiveCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) \
xStreamBufferReceiveCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
#if defined( __cplusplus )
} /* extern "C" */
#endif
/* *INDENT-OFF* */
#if defined( __cplusplus )
} /* extern "C" */
#endif
/* *INDENT-ON* */
#endif /* !defined( FREERTOS_MESSAGE_BUFFER_H ) */

1
include/mpu_prototypes.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*

1
include/mpu_wrappers.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef MPU_WRAPPERS_H

201
include/portable.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------
@ -30,7 +29,7 @@
*----------------------------------------------------------*/
#ifndef PORTABLE_H
#define PORTABLE_H
#define PORTABLE_H
/* Each FreeRTOS port has a unique portmacro.h header file. Originally a
* pre-processor definition was used to ensure the pre-processor found the correct
@ -42,61 +41,63 @@
* to make it clear that new projects should not use it, support for the port
* specific constants has been moved into the deprecated_definitions.h header
* file. */
#include "deprecated_definitions.h"
#include "deprecated_definitions.h"
/* If portENTER_CRITICAL is not defined then including deprecated_definitions.h
* did not result in a portmacro.h header file being included - and it should be
* included here. In this case the path to the correct portmacro.h header file
* must be set in the compiler's include path. */
#ifndef portENTER_CRITICAL
#include "portmacro.h"
#endif
#ifndef portENTER_CRITICAL
#include "portmacro.h"
#endif
#if portBYTE_ALIGNMENT == 32
#define portBYTE_ALIGNMENT_MASK ( 0x001f )
#endif
#if portBYTE_ALIGNMENT == 32
#define portBYTE_ALIGNMENT_MASK ( 0x001f )
#endif
#if portBYTE_ALIGNMENT == 16
#define portBYTE_ALIGNMENT_MASK ( 0x000f )
#endif
#if portBYTE_ALIGNMENT == 16
#define portBYTE_ALIGNMENT_MASK ( 0x000f )
#endif
#if portBYTE_ALIGNMENT == 8
#define portBYTE_ALIGNMENT_MASK ( 0x0007 )
#endif
#if portBYTE_ALIGNMENT == 8
#define portBYTE_ALIGNMENT_MASK ( 0x0007 )
#endif
#if portBYTE_ALIGNMENT == 4
#define portBYTE_ALIGNMENT_MASK ( 0x0003 )
#endif
#if portBYTE_ALIGNMENT == 4
#define portBYTE_ALIGNMENT_MASK ( 0x0003 )
#endif
#if portBYTE_ALIGNMENT == 2
#define portBYTE_ALIGNMENT_MASK ( 0x0001 )
#endif
#if portBYTE_ALIGNMENT == 2
#define portBYTE_ALIGNMENT_MASK ( 0x0001 )
#endif
#if portBYTE_ALIGNMENT == 1
#define portBYTE_ALIGNMENT_MASK ( 0x0000 )
#endif
#if portBYTE_ALIGNMENT == 1
#define portBYTE_ALIGNMENT_MASK ( 0x0000 )
#endif
#ifndef portBYTE_ALIGNMENT_MASK
#error "Invalid portBYTE_ALIGNMENT definition"
#endif
#ifndef portBYTE_ALIGNMENT_MASK
#error "Invalid portBYTE_ALIGNMENT definition"
#endif
#ifndef portNUM_CONFIGURABLE_REGIONS
#define portNUM_CONFIGURABLE_REGIONS 1
#endif
#ifndef portNUM_CONFIGURABLE_REGIONS
#define portNUM_CONFIGURABLE_REGIONS 1
#endif
#ifndef portHAS_STACK_OVERFLOW_CHECKING
#define portHAS_STACK_OVERFLOW_CHECKING 0
#endif
#ifndef portHAS_STACK_OVERFLOW_CHECKING
#define portHAS_STACK_OVERFLOW_CHECKING 0
#endif
#ifndef portARCH_NAME
#define portARCH_NAME NULL
#endif
#ifndef portARCH_NAME
#define portARCH_NAME NULL
#endif
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
#include "mpu_wrappers.h"
#include "mpu_wrappers.h"
/*
* Setup the stack of a new task so it is ready to be placed under the
@ -104,51 +105,51 @@
* the order that the port expects to find them.
*
*/
#if ( portUSING_MPU_WRAPPERS == 1 )
#if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
#endif
#else /* if ( portUSING_MPU_WRAPPERS == 1 ) */
#if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters ) PRIVILEGED_FUNCTION;
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters ) PRIVILEGED_FUNCTION;
#endif
#endif /* if ( portUSING_MPU_WRAPPERS == 1 ) */
#if ( portUSING_MPU_WRAPPERS == 1 )
#if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
#endif
#else /* if ( portUSING_MPU_WRAPPERS == 1 ) */
#if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters ) PRIVILEGED_FUNCTION;
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters ) PRIVILEGED_FUNCTION;
#endif
#endif /* if ( portUSING_MPU_WRAPPERS == 1 ) */
/* Used by heap_5.c to define the start address and size of each memory region
* that together comprise the total FreeRTOS heap space. */
typedef struct HeapRegion
{
uint8_t * pucStartAddress;
size_t xSizeInBytes;
} HeapRegion_t;
typedef struct HeapRegion
{
uint8_t * pucStartAddress;
size_t xSizeInBytes;
} HeapRegion_t;
/* Used to pass information about the heap out of vPortGetHeapStats(). */
typedef struct xHeapStats
{
size_t xAvailableHeapSpaceInBytes; /* The total heap size currently available - this is the sum of all the free blocks, not the largest block that can be allocated. */
size_t xSizeOfLargestFreeBlockInBytes; /* The maximum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xSizeOfSmallestFreeBlockInBytes; /* The minimum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xNumberOfFreeBlocks; /* The number of free memory blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xMinimumEverFreeBytesRemaining; /* The minimum amount of total free memory (sum of all free blocks) there has been in the heap since the system booted. */
size_t xNumberOfSuccessfulAllocations; /* The number of calls to pvPortMalloc() that have returned a valid memory block. */
size_t xNumberOfSuccessfulFrees; /* The number of calls to vPortFree() that has successfully freed a block of memory. */
} HeapStats_t;
typedef struct xHeapStats
{
size_t xAvailableHeapSpaceInBytes; /* The total heap size currently available - this is the sum of all the free blocks, not the largest block that can be allocated. */
size_t xSizeOfLargestFreeBlockInBytes; /* The maximum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xSizeOfSmallestFreeBlockInBytes; /* The minimum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xNumberOfFreeBlocks; /* The number of free memory blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xMinimumEverFreeBytesRemaining; /* The minimum amount of total free memory (sum of all free blocks) there has been in the heap since the system booted. */
size_t xNumberOfSuccessfulAllocations; /* The number of calls to pvPortMalloc() that have returned a valid memory block. */
size_t xNumberOfSuccessfulFrees; /* The number of calls to vPortFree() that has successfully freed a block of memory. */
} HeapStats_t;
/*
* Used to define multiple heap regions for use by heap_5.c. This function
@ -161,35 +162,35 @@
* terminated by a HeapRegions_t structure that has a size of 0. The region
* with the lowest start address must appear first in the array.
*/
void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions ) PRIVILEGED_FUNCTION;
void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions ) PRIVILEGED_FUNCTION;
/*
* Returns a HeapStats_t structure filled with information about the current
* heap state.
*/
void vPortGetHeapStats( HeapStats_t * pxHeapStats );
void vPortGetHeapStats( HeapStats_t * pxHeapStats );
/*
* Map to the memory management routines required for the port.
*/
void * pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION;
void vPortFree( void * pv ) PRIVILEGED_FUNCTION;
void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;
size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;
size_t xPortGetMinimumEverFreeHeapSize( void ) PRIVILEGED_FUNCTION;
void * pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION;
void vPortFree( void * pv ) PRIVILEGED_FUNCTION;
void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;
size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;
size_t xPortGetMinimumEverFreeHeapSize( void ) PRIVILEGED_FUNCTION;
/*
* Setup the hardware ready for the scheduler to take control. This generally
* sets up a tick interrupt and sets timers for the correct tick frequency.
*/
BaseType_t xPortStartScheduler( void ) PRIVILEGED_FUNCTION;
BaseType_t xPortStartScheduler( void ) PRIVILEGED_FUNCTION;
/*
* Undo any hardware/ISR setup that was performed by xPortStartScheduler() so
* the hardware is left in its original condition after the scheduler stops
* executing.
*/
void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;
void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;
/*
* The structures and methods of manipulating the MPU are contained within the
@ -198,16 +199,18 @@
* Fills the xMPUSettings structure with the memory region information
* contained in xRegions.
*/
#if ( portUSING_MPU_WRAPPERS == 1 )
struct xMEMORY_REGION;
void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
const struct xMEMORY_REGION * const xRegions,
StackType_t * pxBottomOfStack,
uint32_t ulStackDepth ) PRIVILEGED_FUNCTION;
#endif
#if ( portUSING_MPU_WRAPPERS == 1 )
struct xMEMORY_REGION;
void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
const struct xMEMORY_REGION * const xRegions,
StackType_t * pxBottomOfStack,
uint32_t ulStackDepth ) PRIVILEGED_FUNCTION;
#endif
#ifdef __cplusplus
}
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* PORTABLE_H */

1
include/projdefs.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef PROJDEFS_H

3403
include/queue.h
View file

File diff suppressed because it is too large Load diff

3
include/semphr.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef SEMAPHORE_H
@ -562,7 +561,7 @@ typedef QueueHandle_t SemaphoreHandle_t;
* Example usage:
* <pre>
\#define LONG_TIME 0xffff
\#define TICKS_TO_WAIT 10
\#define TICKS_TO_WAIT 10
* SemaphoreHandle_t xSemaphore = NULL;
*
* // Repetitive task.

1
include/stack_macros.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef STACK_MACROS_H

120
include/stream_buffer.h
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*
@ -49,15 +48,17 @@
*/
#ifndef STREAM_BUFFER_H
#define STREAM_BUFFER_H
#define STREAM_BUFFER_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include stream_buffer.h"
#endif
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include stream_buffer.h"
#endif
#if defined( __cplusplus )
extern "C" {
#endif
/* *INDENT-OFF* */
#if defined( __cplusplus )
extern "C" {
#endif
/* *INDENT-ON* */
/**
* Type by which stream buffers are referenced. For example, a call to
@ -65,8 +66,8 @@
* then be used as a parameter to xStreamBufferSend(), xStreamBufferReceive(),
* etc.
*/
struct StreamBufferDef_t;
typedef struct StreamBufferDef_t * StreamBufferHandle_t;
struct StreamBufferDef_t;
typedef struct StreamBufferDef_t * StreamBufferHandle_t;
/**
@ -134,7 +135,7 @@
* \defgroup xStreamBufferCreate xStreamBufferCreate
* \ingroup StreamBufferManagement
*/
#define xStreamBufferCreate( xBufferSizeBytes, xTriggerLevelBytes ) xStreamBufferGenericCreate( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE )
#define xStreamBufferCreate( xBufferSizeBytes, xTriggerLevelBytes ) xStreamBufferGenericCreate( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE )
/**
* stream_buffer.h
@ -215,7 +216,8 @@
* \defgroup xStreamBufferCreateStatic xStreamBufferCreateStatic
* \ingroup StreamBufferManagement
*/
#define xStreamBufferCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pucStreamBufferStorageArea, pxStaticStreamBuffer ) xStreamBufferGenericCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE, pucStreamBufferStorageArea, pxStaticStreamBuffer )
#define xStreamBufferCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pucStreamBufferStorageArea, pxStaticStreamBuffer ) \
xStreamBufferGenericCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE, pucStreamBufferStorageArea, pxStaticStreamBuffer )
/**
* stream_buffer.h
@ -309,10 +311,10 @@
* \defgroup xStreamBufferSend xStreamBufferSend
* \ingroup StreamBufferManagement
*/
size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
const void * pvTxData,
size_t xDataLengthBytes,
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
const void * pvTxData,
size_t xDataLengthBytes,
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -410,10 +412,10 @@
* \defgroup xStreamBufferSendFromISR xStreamBufferSendFromISR
* \ingroup StreamBufferManagement
*/
size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer,
const void * pvTxData,
size_t xDataLengthBytes,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer,
const void * pvTxData,
size_t xDataLengthBytes,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -499,10 +501,10 @@
* \defgroup xStreamBufferReceive xStreamBufferReceive
* \ingroup StreamBufferManagement
*/
size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
void * pvRxData,
size_t xBufferLengthBytes,
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
void * pvRxData,
size_t xBufferLengthBytes,
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -585,10 +587,10 @@
* \defgroup xStreamBufferReceiveFromISR xStreamBufferReceiveFromISR
* \ingroup StreamBufferManagement
*/
size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer,
void * pvRxData,
size_t xBufferLengthBytes,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer,
void * pvRxData,
size_t xBufferLengthBytes,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -610,7 +612,7 @@
* \defgroup vStreamBufferDelete vStreamBufferDelete
* \ingroup StreamBufferManagement
*/
void vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
void vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -630,7 +632,7 @@
* \defgroup xStreamBufferIsFull xStreamBufferIsFull
* \ingroup StreamBufferManagement
*/
BaseType_t xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
BaseType_t xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -650,7 +652,7 @@
* \defgroup xStreamBufferIsEmpty xStreamBufferIsEmpty
* \ingroup StreamBufferManagement
*/
BaseType_t xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
BaseType_t xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -673,7 +675,7 @@
* \defgroup xStreamBufferReset xStreamBufferReset
* \ingroup StreamBufferManagement
*/
BaseType_t xStreamBufferReset( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
BaseType_t xStreamBufferReset( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -694,7 +696,7 @@
* \defgroup xStreamBufferSpacesAvailable xStreamBufferSpacesAvailable
* \ingroup StreamBufferManagement
*/
size_t xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
size_t xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -715,7 +717,7 @@
* \defgroup xStreamBufferBytesAvailable xStreamBufferBytesAvailable
* \ingroup StreamBufferManagement
*/
size_t xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
size_t xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -752,8 +754,8 @@
* \defgroup xStreamBufferSetTriggerLevel xStreamBufferSetTriggerLevel
* \ingroup StreamBufferManagement
*/
BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer,
size_t xTriggerLevel ) PRIVILEGED_FUNCTION;
BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer,
size_t xTriggerLevel ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -792,8 +794,8 @@
* \defgroup xStreamBufferSendCompletedFromISR xStreamBufferSendCompletedFromISR
* \ingroup StreamBufferManagement
*/
BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
@ -833,31 +835,33 @@
* \defgroup xStreamBufferReceiveCompletedFromISR xStreamBufferReceiveCompletedFromISR
* \ingroup StreamBufferManagement
*/
BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
/* Functions below here are not part of the public API. */
StreamBufferHandle_t xStreamBufferGenericCreate( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
BaseType_t xIsMessageBuffer ) PRIVILEGED_FUNCTION;
StreamBufferHandle_t xStreamBufferGenericCreate( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
BaseType_t xIsMessageBuffer ) PRIVILEGED_FUNCTION;
StreamBufferHandle_t xStreamBufferGenericCreateStatic( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
BaseType_t xIsMessageBuffer,
uint8_t * const pucStreamBufferStorageArea,
StaticStreamBuffer_t * const pxStaticStreamBuffer ) PRIVILEGED_FUNCTION;
StreamBufferHandle_t xStreamBufferGenericCreateStatic( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
BaseType_t xIsMessageBuffer,
uint8_t * const pucStreamBufferStorageArea,
StaticStreamBuffer_t * const pxStaticStreamBuffer ) PRIVILEGED_FUNCTION;
size_t xStreamBufferNextMessageLengthBytes( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
size_t xStreamBufferNextMessageLengthBytes( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
#if ( configUSE_TRACE_FACILITY == 1 )
void vStreamBufferSetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer,
UBaseType_t uxStreamBufferNumber ) PRIVILEGED_FUNCTION;
UBaseType_t uxStreamBufferGetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
uint8_t ucStreamBufferGetStreamBufferType( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
#endif
#if ( configUSE_TRACE_FACILITY == 1 )
void vStreamBufferSetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer,
UBaseType_t uxStreamBufferNumber ) PRIVILEGED_FUNCTION;
UBaseType_t uxStreamBufferGetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
uint8_t ucStreamBufferGetStreamBufferType( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
#endif
#if defined( __cplusplus )
}
#endif
/* *INDENT-OFF* */
#if defined( __cplusplus )
}
#endif
/* *INDENT-ON* */
#endif /* !defined( STREAM_BUFFER_H ) */

5833
include/task.h
View file

File diff suppressed because it is too large Load diff

2652
include/timers.h
View file

File diff suppressed because it is too large Load diff

1
list.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/

2382
portable/ARMv8M/non_secure/port.c
View file

File diff suppressed because it is too large Load diff

256
portable/BCC/16BitDOS/Flsh186/port.c
View file

@ -26,22 +26,22 @@
*/
/*
* Changes from V1.00:
*
+ Call to taskYIELD() from within tick ISR has been replaced by the more
+ efficient portSWITCH_CONTEXT().
+ ISR function definitions renamed to include the prv prefix.
+
+ Changes from V2.6.1
+
+ Replaced the sUsingPreemption variable with the configUSE_PREEMPTION
+ macro to be consistent with the later ports.
*/
Changes from V1.00:
+ Call to taskYIELD() from within tick ISR has been replaced by the more
efficient portSWITCH_CONTEXT().
+ ISR function definitions renamed to include the prv prefix.
Changes from V2.6.1
+ Replaced the sUsingPreemption variable with the configUSE_PREEMPTION
macro to be consistent with the later ports.
*/
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the Flashlite 186
* port.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the Flashlite 186
* port.
*----------------------------------------------------------*/
#include <dos.h>
#include <stdlib.h>
@ -53,13 +53,13 @@
/*lint -e950 Non ANSI reserved words okay in this file only. */
#define portTIMER_EOI_TYPE ( 8 )
#define portRESET_PIC() portOUTPUT_WORD( ( uint16_t ) 0xff22, portTIMER_EOI_TYPE )
#define portTIMER_INT_NUMBER 0x12
#define portTIMER_EOI_TYPE ( 8 )
#define portRESET_PIC() portOUTPUT_WORD( ( uint16_t ) 0xff22, portTIMER_EOI_TYPE )
#define portTIMER_INT_NUMBER 0x12
#define portTIMER_1_CONTROL_REGISTER ( ( uint16_t ) 0xff5e )
#define portTIMER_0_CONTROL_REGISTER ( ( uint16_t ) 0xff56 )
#define portTIMER_INTERRUPT_ENABLE ( ( uint16_t ) 0x2000 )
#define portTIMER_1_CONTROL_REGISTER ( ( uint16_t ) 0xff5e )
#define portTIMER_0_CONTROL_REGISTER ( ( uint16_t ) 0xff56 )
#define portTIMER_INTERRUPT_ENABLE ( ( uint16_t ) 0x2000 )
/* Setup the hardware to generate the required tick frequency. */
static void prvSetTickFrequency( uint32_t ulTickRateHz );
@ -68,17 +68,15 @@ static void prvSetTickFrequency( uint32_t ulTickRateHz );
static void prvExitFunction( void );
/* The ISR used depends on whether the preemptive or cooperative scheduler
* is being used. */
#if ( configUSE_PREEMPTION == 1 )
/* Tick service routine used by the scheduler when preemptive scheduling is
* being used. */
static void __interrupt __far prvPreemptiveTick( void );
is being used. */
#if( configUSE_PREEMPTION == 1 )
/* Tick service routine used by the scheduler when preemptive scheduling is
being used. */
static void __interrupt __far prvPreemptiveTick( void );
#else
/* Tick service routine used by the scheduler when cooperative scheduling is
* being used. */
static void __interrupt __far prvNonPreemptiveTick( void );
/* Tick service routine used by the scheduler when cooperative scheduling is
being used. */
static void __interrupt __far prvNonPreemptiveTick( void );
#endif
/* Trap routine used by taskYIELD() to manually cause a context switch. */
@ -90,9 +88,9 @@ static void __interrupt __far prvYieldProcessor( void );
static BaseType_t xSchedulerRunning = pdFALSE;
/* Points to the original routine installed on the vector we use for manual
* context switches. This is then used to restore the original routine during
* prvExitFunction(). */
static void( __interrupt __far * pxOldSwitchISR )();
context switches. This is then used to restore the original routine during
prvExitFunction(). */
static void ( __interrupt __far *pxOldSwitchISR )();
/* Used to restore the original DOS context when the scheduler is ended. */
static jmp_buf xJumpBuf;
@ -102,145 +100,145 @@ static jmp_buf xJumpBuf;
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* This is called with interrupts already disabled. */
/* This is called with interrupts already disabled. */
/* Remember what was on the interrupts we are going to use
* so we can put them back later if required. */
pxOldSwitchISR = _dos_getvect( portSWITCH_INT_NUMBER );
/* Remember what was on the interrupts we are going to use
so we can put them back later if required. */
pxOldSwitchISR = _dos_getvect( portSWITCH_INT_NUMBER );
/* Put our manual switch (yield) function on a known
* vector. */
_dos_setvect( portSWITCH_INT_NUMBER, prvYieldProcessor );
/* Put our manual switch (yield) function on a known
vector. */
_dos_setvect( portSWITCH_INT_NUMBER, prvYieldProcessor );
#if ( configUSE_PREEMPTION == 1 )
{
/* Put our tick switch function on the timer interrupt. */
_dos_setvect( portTIMER_INT_NUMBER, prvPreemptiveTick );
}
#else
{
/* We want the timer interrupt to just increment the tick count. */
_dos_setvect( portTIMER_INT_NUMBER, prvNonPreemptiveTick );
}
#endif
#if( configUSE_PREEMPTION == 1 )
{
/* Put our tick switch function on the timer interrupt. */
_dos_setvect( portTIMER_INT_NUMBER, prvPreemptiveTick );
}
#else
{
/* We want the timer interrupt to just increment the tick count. */
_dos_setvect( portTIMER_INT_NUMBER, prvNonPreemptiveTick );
}
#endif
prvSetTickFrequency( configTICK_RATE_HZ );
prvSetTickFrequency( configTICK_RATE_HZ );
/* Clean up function if we want to return to DOS. */
if( setjmp( xJumpBuf ) != 0 )
{
prvExitFunction();
xSchedulerRunning = pdFALSE;
}
else
{
xSchedulerRunning = pdTRUE;
/* Clean up function if we want to return to DOS. */
if( setjmp( xJumpBuf ) != 0 )
{
prvExitFunction();
xSchedulerRunning = pdFALSE;
}
else
{
xSchedulerRunning = pdTRUE;
/* Kick off the scheduler by setting up the context of the first task. */
portFIRST_CONTEXT();
}
/* Kick off the scheduler by setting up the context of the first task. */
portFIRST_CONTEXT();
}
return xSchedulerRunning;
return xSchedulerRunning;
}
/*-----------------------------------------------------------*/
/* The ISR used depends on whether the preemptive or cooperative scheduler
* is being used. */
#if ( configUSE_PREEMPTION == 1 )
static void __interrupt __far prvPreemptiveTick( void )
{
/* Get the scheduler to update the task states following the tick. */
if( xTaskIncrementTick() != pdFALSE )
{
/* Switch in the context of the next task to be run. */
portSWITCH_CONTEXT();
}
is being used. */
#if( configUSE_PREEMPTION == 1 )
static void __interrupt __far prvPreemptiveTick( void )
{
/* Get the scheduler to update the task states following the tick. */
if( xTaskIncrementTick() != pdFALSE )
{
/* Switch in the context of the next task to be run. */
portSWITCH_CONTEXT();
}
/* Reset the PIC ready for the next time. */
portRESET_PIC();
}
#else /* if ( configUSE_PREEMPTION == 1 ) */
static void __interrupt __far prvNonPreemptiveTick( void )
{
/* Same as preemptive tick, but the cooperative scheduler is being used
* so we don't have to switch in the context of the next task. */
xTaskIncrementTick();
portRESET_PIC();
}
#endif /* if ( configUSE_PREEMPTION == 1 ) */
/* Reset the PIC ready for the next time. */
portRESET_PIC();
}
#else
static void __interrupt __far prvNonPreemptiveTick( void )
{
/* Same as preemptive tick, but the cooperative scheduler is being used
so we don't have to switch in the context of the next task. */
xTaskIncrementTick();
portRESET_PIC();
}
#endif
/*-----------------------------------------------------------*/
static void __interrupt __far prvYieldProcessor( void )
{
/* Switch in the context of the next task to be run. */
portSWITCH_CONTEXT();
/* Switch in the context of the next task to be run. */
portSWITCH_CONTEXT();
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* Jump back to the processor state prior to starting the
* scheduler. This means we are not going to be using a
* task stack frame so the task can be deleted. */
longjmp( xJumpBuf, 1 );
/* Jump back to the processor state prior to starting the
scheduler. This means we are not going to be using a
task stack frame so the task can be deleted. */
longjmp( xJumpBuf, 1 );
}
/*-----------------------------------------------------------*/
static void prvExitFunction( void )
{
const uint16_t usTimerDisable = 0x0000;
uint16_t usTimer0Control;
const uint16_t usTimerDisable = 0x0000;
uint16_t usTimer0Control;
/* Interrupts should be disabled here anyway - but no
* harm in making sure. */
portDISABLE_INTERRUPTS();
/* Interrupts should be disabled here anyway - but no
harm in making sure. */
portDISABLE_INTERRUPTS();
if( xSchedulerRunning == pdTRUE )
{
/* Put back the switch interrupt routines that was in place
before the scheduler started. */
_dos_setvect( portSWITCH_INT_NUMBER, pxOldSwitchISR );
}
if( xSchedulerRunning == pdTRUE )
{
/* Put back the switch interrupt routines that was in place
* before the scheduler started. */
_dos_setvect( portSWITCH_INT_NUMBER, pxOldSwitchISR );
}
/* Disable the timer used for the tick to ensure the scheduler is
not called before restoring interrupts. There was previously nothing
on this timer so there is no old ISR to restore. */
portOUTPUT_WORD( portTIMER_1_CONTROL_REGISTER, usTimerDisable );
/* Disable the timer used for the tick to ensure the scheduler is
* not called before restoring interrupts. There was previously nothing
* on this timer so there is no old ISR to restore. */
portOUTPUT_WORD( portTIMER_1_CONTROL_REGISTER, usTimerDisable );
/* Restart the DOS tick. */
usTimer0Control = portINPUT_WORD( portTIMER_0_CONTROL_REGISTER );
usTimer0Control |= portTIMER_INTERRUPT_ENABLE;
portOUTPUT_WORD( portTIMER_0_CONTROL_REGISTER, usTimer0Control );
/* Restart the DOS tick. */
usTimer0Control = portINPUT_WORD( portTIMER_0_CONTROL_REGISTER );
usTimer0Control |= portTIMER_INTERRUPT_ENABLE;
portOUTPUT_WORD( portTIMER_0_CONTROL_REGISTER, usTimer0Control );
portENABLE_INTERRUPTS();
portENABLE_INTERRUPTS();
}
/*-----------------------------------------------------------*/
static void prvSetTickFrequency( uint32_t ulTickRateHz )
{
const uint16_t usMaxCountRegister = 0xff5a;
const uint16_t usTimerPriorityRegister = 0xff32;
const uint16_t usTimerEnable = 0xC000;
const uint16_t usRetrigger = 0x0001;
const uint16_t usTimerHighPriority = 0x0000;
uint16_t usTimer0Control;
const uint16_t usMaxCountRegister = 0xff5a;
const uint16_t usTimerPriorityRegister = 0xff32;
const uint16_t usTimerEnable = 0xC000;
const uint16_t usRetrigger = 0x0001;
const uint16_t usTimerHighPriority = 0x0000;
uint16_t usTimer0Control;
/* ( CPU frequency / 4 ) / clock 2 max count [inpw( 0xff62 ) = 7] */
const uint32_t ulClockFrequency = ( uint32_t ) 0x7f31a0UL;
const uint32_t ulClockFrequency = ( uint32_t ) 0x7f31a0UL;
uint32_t ulTimerCount = ulClockFrequency / ulTickRateHz;
uint32_t ulTimerCount = ulClockFrequency / ulTickRateHz;
portOUTPUT_WORD( portTIMER_1_CONTROL_REGISTER, usTimerEnable | portTIMER_INTERRUPT_ENABLE | usRetrigger );
portOUTPUT_WORD( usMaxCountRegister, ( uint16_t ) ulTimerCount );
portOUTPUT_WORD( usTimerPriorityRegister, usTimerHighPriority );
portOUTPUT_WORD( portTIMER_1_CONTROL_REGISTER, usTimerEnable | portTIMER_INTERRUPT_ENABLE | usRetrigger );
portOUTPUT_WORD( usMaxCountRegister, ( uint16_t ) ulTimerCount );
portOUTPUT_WORD( usTimerPriorityRegister, usTimerHighPriority );
/* Stop the DOS tick - don't do this if you want to maintain a TOD clock. */
usTimer0Control = portINPUT_WORD( portTIMER_0_CONTROL_REGISTER );
usTimer0Control &= ~portTIMER_INTERRUPT_ENABLE;
portOUTPUT_WORD( portTIMER_0_CONTROL_REGISTER, usTimer0Control );
/* Stop the DOS tick - don't do this if you want to maintain a TOD clock. */
usTimer0Control = portINPUT_WORD( portTIMER_0_CONTROL_REGISTER );
usTimer0Control &= ~portTIMER_INTERRUPT_ENABLE;
portOUTPUT_WORD( portTIMER_0_CONTROL_REGISTER, usTimer0Control );
}
/*lint +e950 */

68
portable/BCC/16BitDOS/Flsh186/prtmacro.h
View file

@ -39,59 +39,59 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE long
#define portLONG long
#define portSHORT int
#define portSTACK_TYPE uint16_t
#define portBASE_TYPE portSHORT
#define portCHAR char
#define portFLOAT float
#define portDOUBLE long
#define portLONG long
#define portSHORT int
#define portSTACK_TYPE uint16_t
#define portBASE_TYPE portSHORT
typedef portSTACK_TYPE StackType_t;
typedef short BaseType_t;
typedef unsigned short UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef short BaseType_t;
typedef unsigned short UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Critical section handling. */
#define portENTER_CRITICAL() \
__asm{ pushf } \
__asm{ cli } \
#define portENTER_CRITICAL() __asm{ pushf } \
__asm{ cli } \
#define portEXIT_CRITICAL() __asm{ popf }
#define portEXIT_CRITICAL() __asm{ popf }
#define portDISABLE_INTERRUPTS() __asm{ cli }
#define portDISABLE_INTERRUPTS() __asm{ cli }
#define portENABLE_INTERRUPTS() __asm{ sti }
#define portENABLE_INTERRUPTS() __asm{ sti }
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portNOP() __asm{ nop }
#define portSTACK_GROWTH ( -1 )
#define portSWITCH_INT_NUMBER 0x80
#define portYIELD() __asm{ int portSWITCH_INT_NUMBER }
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 2
#define portINITIAL_SW ( ( portSTACK_TYPE ) 0x0202 ) /* Start the tasks with interrupts enabled. */
#define portNOP() __asm{ nop }
#define portSTACK_GROWTH ( -1 )
#define portSWITCH_INT_NUMBER 0x80
#define portYIELD() __asm{ int portSWITCH_INT_NUMBER }
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 2
#define portINITIAL_SW ( ( portSTACK_TYPE ) 0x0202 ) /* Start the tasks with interrupts enabled. */
/*-----------------------------------------------------------*/
/* Compiler specifics. */
#define portINPUT_BYTE( xAddr ) inp( xAddr )
#define portOUTPUT_BYTE( xAddr, ucValue ) outp( xAddr, ucValue )
#define portINPUT_WORD( xAddr ) inpw( xAddr )
#define portOUTPUT_WORD( xAddr, usValue ) outpw( xAddr, usValue )
#define portINPUT_BYTE( xAddr ) inp( xAddr )
#define portOUTPUT_BYTE( xAddr, ucValue ) outp( xAddr, ucValue )
#define portINPUT_WORD( xAddr ) inpw( xAddr )
#define portOUTPUT_WORD( xAddr, usValue ) outpw( xAddr, usValue )
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vTaskFunction, vParameters ) void vTaskFunction( void * pvParameters )
#define portTASK_FUNCTION( vTaskFunction, vParameters ) void vTaskFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vTaskFunction, vParameters ) void vTaskFunction( void *pvParameters )
#define portTASK_FUNCTION( vTaskFunction, vParameters ) void vTaskFunction( void *pvParameters )
#endif /* PORTMACRO_H */

316
portable/BCC/16BitDOS/PC/port.c
View file

@ -26,16 +26,16 @@
*/
/*
* Changes from V2.6.1
*
+ Replaced the sUsingPreemption variable with the configUSE_PREEMPTION
+ macro to be consistent with the later ports.
+
+ Changes from V4.0.1
+
+ Add function prvSetTickFrequencyDefault() to set the DOS tick back to
+ its proper value when the scheduler exits.
*/
Changes from V2.6.1
+ Replaced the sUsingPreemption variable with the configUSE_PREEMPTION
macro to be consistent with the later ports.
Changes from V4.0.1
+ Add function prvSetTickFrequencyDefault() to set the DOS tick back to
its proper value when the scheduler exits.
*/
#include <stdlib.h>
#include <dos.h>
@ -46,13 +46,13 @@
#include "portasm.h"
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the industrial
* PC port.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the industrial
* PC port.
*----------------------------------------------------------*/
/*lint -e950 Non ANSI reserved words okay in this file only. */
#define portTIMER_INT_NUMBER 0x08
#define portTIMER_INT_NUMBER 0x08
/* Setup hardware for required tick interrupt rate. */
static void prvSetTickFrequency( uint32_t ulTickRateHz );
@ -61,29 +61,27 @@ static void prvSetTickFrequency( uint32_t ulTickRateHz );
static void prvExitFunction( void );
/* Either chain to the DOS tick (which itself clears the PIC) or clear the PIC
* directly. We chain to the DOS tick as close as possible to the standard DOS
* tick rate. */
directly. We chain to the DOS tick as close as possible to the standard DOS
tick rate. */
static void prvPortResetPIC( void );
/* The ISR used depends on whether the preemptive or cooperative
* scheduler is being used. */
#if ( configUSE_PREEMPTION == 1 )
/* Tick service routine used by the scheduler when preemptive scheduling is
* being used. */
static void __interrupt __far prvPreemptiveTick( void );
scheduler is being used. */
#if( configUSE_PREEMPTION == 1 )
/* Tick service routine used by the scheduler when preemptive scheduling is
being used. */
static void __interrupt __far prvPreemptiveTick( void );
#else
/* Tick service routine used by the scheduler when cooperative scheduling is
* being used. */
static void __interrupt __far prvNonPreemptiveTick( void );
/* Tick service routine used by the scheduler when cooperative scheduling is
being used. */
static void __interrupt __far prvNonPreemptiveTick( void );
#endif
/* Trap routine used by taskYIELD() to manually cause a context switch. */
static void __interrupt __far prvYieldProcessor( void );
/* Set the tick frequency back so the floppy drive works correctly when the
* scheduler exits. */
scheduler exits. */
static void prvSetTickFrequencyDefault( void );
/*lint -e956 File scopes necessary here. */
@ -92,13 +90,13 @@ static void prvSetTickFrequencyDefault( void );
static int16_t sDOSTickCounter;
/* Set true when the vectors are set so the scheduler will service the tick. */
static BaseType_t xSchedulerRunning = pdFALSE;
static BaseType_t xSchedulerRunning = pdFALSE;
/* Points to the original routine installed on the vector we use for manual context switches. This is then used to restore the original routine during prvExitFunction(). */
static void( __interrupt __far * pxOldSwitchISR )();
static void ( __interrupt __far *pxOldSwitchISR )();
/* Points to the original routine installed on the vector we use to chain to the DOS tick. This is then used to restore the original routine during prvExitFunction(). */
static void( __interrupt __far * pxOldSwitchISRPlus1 )();
static void ( __interrupt __far *pxOldSwitchISRPlus1 )();
/* Used to restore the original DOS context when the scheduler is ended. */
static jmp_buf xJumpBuf;
@ -108,187 +106,183 @@ static jmp_buf xJumpBuf;
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
pxISR pxOriginalTickISR;
pxISR pxOriginalTickISR;
/* This is called with interrupts already disabled. */
/* This is called with interrupts already disabled. */
/* Remember what was on the interrupts we are going to use
so we can put them back later if required. */
pxOldSwitchISR = _dos_getvect( portSWITCH_INT_NUMBER );
pxOriginalTickISR = _dos_getvect( portTIMER_INT_NUMBER );
pxOldSwitchISRPlus1 = _dos_getvect( portSWITCH_INT_NUMBER + 1 );
/* Remember what was on the interrupts we are going to use
* so we can put them back later if required. */
pxOldSwitchISR = _dos_getvect( portSWITCH_INT_NUMBER );
pxOriginalTickISR = _dos_getvect( portTIMER_INT_NUMBER );
pxOldSwitchISRPlus1 = _dos_getvect( portSWITCH_INT_NUMBER + 1 );
prvSetTickFrequency( configTICK_RATE_HZ );
prvSetTickFrequency( configTICK_RATE_HZ );
/* Put our manual switch (yield) function on a known
vector. */
_dos_setvect( portSWITCH_INT_NUMBER, prvYieldProcessor );
/* Put our manual switch (yield) function on a known
* vector. */
_dos_setvect( portSWITCH_INT_NUMBER, prvYieldProcessor );
/* Put the old tick on a different interrupt number so we can
call it when we want. */
_dos_setvect( portSWITCH_INT_NUMBER + 1, pxOriginalTickISR );
/* Put the old tick on a different interrupt number so we can
* call it when we want. */
_dos_setvect( portSWITCH_INT_NUMBER + 1, pxOriginalTickISR );
/* The ISR used depends on whether the preemptive or cooperative
* scheduler is being used. */
#if ( configUSE_PREEMPTION == 1 )
{
/* Put our tick switch function on the timer interrupt. */
_dos_setvect( portTIMER_INT_NUMBER, prvPreemptiveTick );
}
#else
{
/* We want the timer interrupt to just increment the tick count. */
_dos_setvect( portTIMER_INT_NUMBER, prvNonPreemptiveTick );
}
/* The ISR used depends on whether the preemptive or cooperative
scheduler is being used. */
#if( configUSE_PREEMPTION == 1 )
{
/* Put our tick switch function on the timer interrupt. */
_dos_setvect( portTIMER_INT_NUMBER, prvPreemptiveTick );
}
#else
{
/* We want the timer interrupt to just increment the tick count. */
_dos_setvect( portTIMER_INT_NUMBER, prvNonPreemptiveTick );
}
#endif
/* Setup a counter that is used to call the DOS interrupt as close
* to it's original frequency as can be achieved given our chosen tick
* frequency. */
sDOSTickCounter = portTICKS_PER_DOS_TICK;
/* Setup a counter that is used to call the DOS interrupt as close
to it's original frequency as can be achieved given our chosen tick
frequency. */
sDOSTickCounter = portTICKS_PER_DOS_TICK;
/* Clean up function if we want to return to DOS. */
if( setjmp( xJumpBuf ) != 0 )
{
prvExitFunction();
xSchedulerRunning = pdFALSE;
}
else
{
xSchedulerRunning = pdTRUE;
/* Clean up function if we want to return to DOS. */
if( setjmp( xJumpBuf ) != 0 )
{
prvExitFunction();
xSchedulerRunning = pdFALSE;
}
else
{
xSchedulerRunning = pdTRUE;
/* Kick off the scheduler by setting up the context of the first task. */
portFIRST_CONTEXT();
}
/* Kick off the scheduler by setting up the context of the first task. */
portFIRST_CONTEXT();
}
return xSchedulerRunning;
return xSchedulerRunning;
}
/*-----------------------------------------------------------*/
/* The ISR used depends on whether the preemptive or cooperative
* scheduler is being used. */
#if ( configUSE_PREEMPTION == 1 )
static void __interrupt __far prvPreemptiveTick( void )
{
/* Get the scheduler to update the task states following the tick. */
if( xTaskIncrementTick() != pdFALSE )
{
/* Switch in the context of the next task to be run. */
portSWITCH_CONTEXT();
}
scheduler is being used. */
#if( configUSE_PREEMPTION == 1 )
static void __interrupt __far prvPreemptiveTick( void )
{
/* Get the scheduler to update the task states following the tick. */
if( xTaskIncrementTick() != pdFALSE )
{
/* Switch in the context of the next task to be run. */
portSWITCH_CONTEXT();
}
/* Reset the PIC ready for the next time. */
prvPortResetPIC();
}
#else /* if ( configUSE_PREEMPTION == 1 ) */
static void __interrupt __far prvNonPreemptiveTick( void )
{
/* Same as preemptive tick, but the cooperative scheduler is being used
* so we don't have to switch in the context of the next task. */
xTaskIncrementTick();
prvPortResetPIC();
}
#endif /* if ( configUSE_PREEMPTION == 1 ) */
/* Reset the PIC ready for the next time. */
prvPortResetPIC();
}
#else
static void __interrupt __far prvNonPreemptiveTick( void )
{
/* Same as preemptive tick, but the cooperative scheduler is being used
so we don't have to switch in the context of the next task. */
xTaskIncrementTick();
prvPortResetPIC();
}
#endif
/*-----------------------------------------------------------*/
static void __interrupt __far prvYieldProcessor( void )
{
/* Switch in the context of the next task to be run. */
portSWITCH_CONTEXT();
/* Switch in the context of the next task to be run. */
portSWITCH_CONTEXT();
}
/*-----------------------------------------------------------*/
static void prvPortResetPIC( void )
{
/* We are going to call the DOS tick interrupt at as close a
* frequency to the normal DOS tick as possible. */
/* We are going to call the DOS tick interrupt at as close a
frequency to the normal DOS tick as possible. */
/* WE SHOULD NOT DO THIS IF YIELD WAS CALLED. */
--sDOSTickCounter;
if( sDOSTickCounter <= 0 )
{
sDOSTickCounter = ( int16_t ) portTICKS_PER_DOS_TICK;
__asm {
int portSWITCH_INT_NUMBER + 1
};
}
else
{
/* Reset the PIC as the DOS tick is not being called to
* do it. */
__asm
{
mov al, 20H
out 20H, al
};
}
/* WE SHOULD NOT DO THIS IF YIELD WAS CALLED. */
--sDOSTickCounter;
if( sDOSTickCounter <= 0 )
{
sDOSTickCounter = ( int16_t ) portTICKS_PER_DOS_TICK;
__asm{ int portSWITCH_INT_NUMBER + 1 };
}
else
{
/* Reset the PIC as the DOS tick is not being called to
do it. */
__asm
{
mov al, 20H
out 20H, al
};
}
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* Jump back to the processor state prior to starting the
* scheduler. This means we are not going to be using a
* task stack frame so the task can be deleted. */
longjmp( xJumpBuf, 1 );
/* Jump back to the processor state prior to starting the
scheduler. This means we are not going to be using a
task stack frame so the task can be deleted. */
longjmp( xJumpBuf, 1 );
}
/*-----------------------------------------------------------*/
static void prvExitFunction( void )
{
void( __interrupt __far * pxOriginalTickISR )();
void ( __interrupt __far *pxOriginalTickISR )();
/* Interrupts should be disabled here anyway - but no
* harm in making sure. */
portDISABLE_INTERRUPTS();
/* Interrupts should be disabled here anyway - but no
harm in making sure. */
portDISABLE_INTERRUPTS();
if( xSchedulerRunning == pdTRUE )
{
/* Set the DOS tick back onto the timer ticker. */
pxOriginalTickISR = _dos_getvect( portSWITCH_INT_NUMBER + 1 );
_dos_setvect( portTIMER_INT_NUMBER, pxOriginalTickISR );
prvSetTickFrequencyDefault();
if( xSchedulerRunning == pdTRUE )
{
/* Set the DOS tick back onto the timer ticker. */
pxOriginalTickISR = _dos_getvect( portSWITCH_INT_NUMBER + 1 );
_dos_setvect( portTIMER_INT_NUMBER, pxOriginalTickISR );
prvSetTickFrequencyDefault();
/* Put back the switch interrupt routines that was in place
* before the scheduler started. */
_dos_setvect( portSWITCH_INT_NUMBER, pxOldSwitchISR );
_dos_setvect( portSWITCH_INT_NUMBER + 1, pxOldSwitchISRPlus1 );
}
/* The tick timer is back how DOS wants it. We can re-enable
* interrupts without the scheduler being called. */
portENABLE_INTERRUPTS();
/* Put back the switch interrupt routines that was in place
before the scheduler started. */
_dos_setvect( portSWITCH_INT_NUMBER, pxOldSwitchISR );
_dos_setvect( portSWITCH_INT_NUMBER + 1, pxOldSwitchISRPlus1 );
}
/* The tick timer is back how DOS wants it. We can re-enable
interrupts without the scheduler being called. */
portENABLE_INTERRUPTS();
}
/*-----------------------------------------------------------*/
static void prvSetTickFrequency( uint32_t ulTickRateHz )
{
const uint16_t usPIT_MODE = ( uint16_t ) 0x43;
const uint16_t usPIT0 = ( uint16_t ) 0x40;
const uint32_t ulPIT_CONST = ( uint32_t ) 1193180UL;
const uint16_t us8254_CTR0_MODE3 = ( uint16_t ) 0x36;
uint32_t ulOutput;
const uint16_t usPIT_MODE = ( uint16_t ) 0x43;
const uint16_t usPIT0 = ( uint16_t ) 0x40;
const uint32_t ulPIT_CONST = ( uint32_t ) 1193180UL;
const uint16_t us8254_CTR0_MODE3 = ( uint16_t ) 0x36;
uint32_t ulOutput;
/* Setup the 8245 to tick at the wanted frequency. */
portOUTPUT_BYTE( usPIT_MODE, us8254_CTR0_MODE3 );
ulOutput = ulPIT_CONST / ulTickRateHz;
portOUTPUT_BYTE( usPIT0, ( uint16_t ) ( ulOutput & ( uint32_t ) 0xff ) );
ulOutput >>= 8;
portOUTPUT_BYTE( usPIT0, ( uint16_t ) ( ulOutput & ( uint32_t ) 0xff ) );
/* Setup the 8245 to tick at the wanted frequency. */
portOUTPUT_BYTE( usPIT_MODE, us8254_CTR0_MODE3 );
ulOutput = ulPIT_CONST / ulTickRateHz;
portOUTPUT_BYTE( usPIT0, ( uint16_t )( ulOutput & ( uint32_t ) 0xff ) );
ulOutput >>= 8;
portOUTPUT_BYTE( usPIT0, ( uint16_t ) ( ulOutput & ( uint32_t ) 0xff ) );
}
/*-----------------------------------------------------------*/
static void prvSetTickFrequencyDefault( void )
{
const uint16_t usPIT_MODE = ( uint16_t ) 0x43;
const uint16_t usPIT0 = ( uint16_t ) 0x40;
const uint16_t us8254_CTR0_MODE3 = ( uint16_t ) 0x36;
const uint16_t usPIT_MODE = ( uint16_t ) 0x43;
const uint16_t usPIT0 = ( uint16_t ) 0x40;
const uint16_t us8254_CTR0_MODE3 = ( uint16_t ) 0x36;
portOUTPUT_BYTE( usPIT_MODE, us8254_CTR0_MODE3 );
portOUTPUT_BYTE( usPIT0, 0 );
portOUTPUT_BYTE( usPIT0, 0 );
portOUTPUT_BYTE( usPIT_MODE, us8254_CTR0_MODE3 );
portOUTPUT_BYTE( usPIT0,0 );
portOUTPUT_BYTE( usPIT0,0 );
}
/*lint +e950 */

68
portable/BCC/16BitDOS/PC/prtmacro.h
View file

@ -39,59 +39,59 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT long
#define portDOUBLE long
#define portLONG long
#define portSHORT int
#define portSTACK_TYPE uint16_t
#define portBASE_TYPE portSHORT
#define portCHAR char
#define portFLOAT long
#define portDOUBLE long
#define portLONG long
#define portSHORT int
#define portSTACK_TYPE uint16_t
#define portBASE_TYPE portSHORT
typedef portSTACK_TYPE StackType_t;
typedef short BaseType_t;
typedef unsigned short UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef short BaseType_t;
typedef unsigned short UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Critical section management. */
#define portENTER_CRITICAL() \
__asm{ pushf } \
__asm{ cli } \
#define portENTER_CRITICAL() __asm{ pushf } \
__asm{ cli } \
#define portEXIT_CRITICAL() __asm{ popf }
#define portEXIT_CRITICAL() __asm{ popf }
#define portDISABLE_INTERRUPTS() __asm{ cli }
#define portDISABLE_INTERRUPTS() __asm{ cli }
#define portENABLE_INTERRUPTS() __asm{ sti }
#define portENABLE_INTERRUPTS() __asm{ sti }
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portNOP() __asm{ nop }
#define portSTACK_GROWTH ( -1 )
#define portSWITCH_INT_NUMBER 0x80
#define portYIELD() __asm{ int portSWITCH_INT_NUMBER }
#define portDOS_TICK_RATE ( 18.20648 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portTICKS_PER_DOS_TICK ( ( uint16_t ) ( ( ( portDOUBLE ) configTICK_RATE_HZ / portDOS_TICK_RATE ) + 0.5 ) )
#define portINITIAL_SW ( ( portSTACK_TYPE ) 0x0202 ) /* Start the tasks with interrupts enabled. */
#define portBYTE_ALIGNMENT ( 2 )
#define portNOP() __asm{ nop }
#define portSTACK_GROWTH ( -1 )
#define portSWITCH_INT_NUMBER 0x80
#define portYIELD() __asm{ int portSWITCH_INT_NUMBER }
#define portDOS_TICK_RATE ( 18.20648 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portTICKS_PER_DOS_TICK ( ( uint16_t ) ( ( ( portDOUBLE ) configTICK_RATE_HZ / portDOS_TICK_RATE ) + 0.5 ) )
#define portINITIAL_SW ( ( portSTACK_TYPE ) 0x0202 ) /* Start the tasks with interrupts enabled. */
#define portBYTE_ALIGNMENT ( 2 )
/*-----------------------------------------------------------*/
/* Compiler specifics. */
#define portINPUT_BYTE( xAddr ) inp( xAddr )
#define portOUTPUT_BYTE( xAddr, ucValue ) outp( xAddr, ucValue )
#define portINPUT_BYTE( xAddr ) inp( xAddr )
#define portOUTPUT_BYTE( xAddr, ucValue ) outp( xAddr, ucValue )
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vTaskFunction, pvParameters ) void vTaskFunction( void * pvParameters )
#define portTASK_FUNCTION( vTaskFunction, pvParameters ) void vTaskFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vTaskFunction, pvParameters ) void vTaskFunction( void *pvParameters )
#define portTASK_FUNCTION( vTaskFunction, pvParameters ) void vTaskFunction( void *pvParameters )
#endif /* PORTMACRO_H */

67
portable/BCC/16BitDOS/common/portasm.h
View file

@ -47,40 +47,41 @@ void portSWITCH_CONTEXT( void );
void portFIRST_CONTEXT( void );
/* There are slightly different versions depending on whether you are building
* to include debugger information. If debugger information is used then there
* are a couple of extra bytes left of the ISR stack (presumably for use by the
* debugger). The true stack pointer is then stored in the bp register. We add
* 2 to the stack pointer to remove the extra bytes before we restore our context. */
to include debugger information. If debugger information is used then there
are a couple of extra bytes left of the ISR stack (presumably for use by the
debugger). The true stack pointer is then stored in the bp register. We add
2 to the stack pointer to remove the extra bytes before we restore our context. */
#define portSWITCH_CONTEXT() \
asm { mov ax, seg pxCurrentTCB } \
asm { mov ds, ax } \
asm { les bx, pxCurrentTCB } /* Save the stack pointer into the TCB. */ \
asm { mov es : 0x2[ bx ], ss } \
asm { mov es:[ bx ], sp } \
asm { call far ptr vTaskSwitchContext } /* Perform the switch. */ \
asm { mov ax, seg pxCurrentTCB } /* Restore the stack pointer from the TCB. */ \
asm { mov ds, ax } \
asm { les bx, dword ptr pxCurrentTCB } \
asm { mov ss, es:[ bx + 2 ] } \
asm { mov sp, es:[ bx ] }
#define portSWITCH_CONTEXT() \
asm { mov ax, seg pxCurrentTCB } \
asm { mov ds, ax } \
asm { les bx, pxCurrentTCB } /* Save the stack pointer into the TCB. */ \
asm { mov es:0x2[ bx ], ss } \
asm { mov es:[ bx ], sp } \
asm { call far ptr vTaskSwitchContext } /* Perform the switch. */ \
asm { mov ax, seg pxCurrentTCB } /* Restore the stack pointer from the TCB. */ \
asm { mov ds, ax } \
asm { les bx, dword ptr pxCurrentTCB } \
asm { mov ss, es:[ bx + 2 ] } \
asm { mov sp, es:[ bx ] }
#define portFIRST_CONTEXT() \
__asm { mov ax, seg pxCurrentTCB } \
__asm { mov ds, ax } \
__asm { les bx, dword ptr pxCurrentTCB } \
__asm { mov ss, es:[ bx + 2 ] } \
__asm { mov sp, es:[ bx ] } \
__asm { pop bp } \
__asm { pop di } \
__asm { pop si } \
__asm { pop ds } \
__asm { pop es } \
__asm { pop dx } \
__asm { pop cx } \
__asm { pop bx } \
__asm { pop ax } \
__asm { iret }
#define portFIRST_CONTEXT() \
__asm { mov ax, seg pxCurrentTCB } \
__asm { mov ds, ax } \
__asm { les bx, dword ptr pxCurrentTCB } \
__asm { mov ss, es:[ bx + 2 ] } \
__asm { mov sp, es:[ bx ] } \
__asm { pop bp } \
__asm { pop di } \
__asm { pop si } \
__asm { pop ds } \
__asm { pop es } \
__asm { pop dx } \
__asm { pop cx } \
__asm { pop bx } \
__asm { pop ax } \
__asm { iret }
#endif /* ifndef PORT_ASM_H */
#endif

141
portable/BCC/16BitDOS/common/portcomn.c
View file

@ -26,16 +26,16 @@
*/
/*
* Changes from V1.00:
*
+ pxPortInitialiseStack() now initialises the stack of new tasks to the
+ same format used by the compiler. This allows the compiler generated
+ interrupt mechanism to be used for context switches.
+
+ Changes from V2.6.1
+
+ Move usPortCheckFreeStackSpace() to tasks.c.
*/
Changes from V1.00:
+ pxPortInitialiseStack() now initialises the stack of new tasks to the
same format used by the compiler. This allows the compiler generated
interrupt mechanism to be used for context switches.
Changes from V2.6.1
+ Move usPortCheckFreeStackSpace() to tasks.c.
*/
#include <dos.h>
@ -45,79 +45,76 @@
/*-----------------------------------------------------------*/
/* See header file for description. */
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
StackType_t DS_Reg = 0;
StackType_t DS_Reg = 0;
/* Place a few bytes of known values on the bottom of the stack.
* This is just useful for debugging. */
/* Place a few bytes of known values on the bottom of the stack.
This is just useful for debugging. */
*pxTopOfStack = 0x1111;
pxTopOfStack--;
*pxTopOfStack = 0x2222;
pxTopOfStack--;
*pxTopOfStack = 0x3333;
pxTopOfStack--;
*pxTopOfStack = 0x4444;
pxTopOfStack--;
*pxTopOfStack = 0x5555;
pxTopOfStack--;
*pxTopOfStack = 0x1111;
pxTopOfStack--;
*pxTopOfStack = 0x2222;
pxTopOfStack--;
*pxTopOfStack = 0x3333;
pxTopOfStack--;
*pxTopOfStack = 0x4444;
pxTopOfStack--;
*pxTopOfStack = 0x5555;
pxTopOfStack--;
/*lint -e950 -e611 -e923 Lint doesn't like this much - but nothing I can do about it. */
/*lint -e950 -e611 -e923 Lint doesn't like this much - but nothing I can do about it. */
/* We are going to start the scheduler using a return from interrupt
* instruction to load the program counter, so first there would be the
* function call with parameters preamble. */
/* We are going to start the scheduler using a return from interrupt
instruction to load the program counter, so first there would be the
function call with parameters preamble. */
*pxTopOfStack = FP_SEG( pvParameters );
pxTopOfStack--;
*pxTopOfStack = FP_OFF( pvParameters );
pxTopOfStack--;
*pxTopOfStack = FP_SEG( pxCode );
pxTopOfStack--;
*pxTopOfStack = FP_OFF( pxCode );
pxTopOfStack--;
*pxTopOfStack = FP_SEG( pvParameters );
pxTopOfStack--;
*pxTopOfStack = FP_OFF( pvParameters );
pxTopOfStack--;
*pxTopOfStack = FP_SEG( pxCode );
pxTopOfStack--;
*pxTopOfStack = FP_OFF( pxCode );
pxTopOfStack--;
/* Next the status register and interrupt return address. */
*pxTopOfStack = portINITIAL_SW;
pxTopOfStack--;
*pxTopOfStack = FP_SEG( pxCode );
pxTopOfStack--;
*pxTopOfStack = FP_OFF( pxCode );
pxTopOfStack--;
/* Next the status register and interrupt return address. */
*pxTopOfStack = portINITIAL_SW;
pxTopOfStack--;
*pxTopOfStack = FP_SEG( pxCode );
pxTopOfStack--;
*pxTopOfStack = FP_OFF( pxCode );
pxTopOfStack--;
/* The remaining registers would be pushed on the stack by our context
switch function. These are loaded with values simply to make debugging
easier. */
*pxTopOfStack = ( StackType_t ) 0xAAAA; /* AX */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xBBBB; /* BX */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xCCCC; /* CX */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xDDDD; /* DX */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xEEEE; /* ES */
pxTopOfStack--;
/* The remaining registers would be pushed on the stack by our context
* switch function. These are loaded with values simply to make debugging
* easier. */
*pxTopOfStack = ( StackType_t ) 0xAAAA; /* AX */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xBBBB; /* BX */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xCCCC; /* CX */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xDDDD; /* DX */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xEEEE; /* ES */
pxTopOfStack--;
/* We need the true data segment. */
__asm{ MOV DS_Reg, DS };
/* We need the true data segment. */
__asm {
MOV DS_Reg, DS
};
*pxTopOfStack = DS_Reg; /* DS */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x0123; /* SI */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xDDDD; /* DI */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xBBBB; /* BP */
*pxTopOfStack = DS_Reg; /* DS */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x0123; /* SI */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xDDDD; /* DI */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xBBBB; /* BP */
/*lint +e950 +e611 +e923 */
/*lint +e950 +e611 +e923 */
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/

1
portable/CCS/ARM_CM3/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------

1
portable/CCS/ARM_CM4F/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------

345
portable/CCS/ARM_Cortex-R4/port.c
View file

@ -37,28 +37,28 @@ uint32_t ulCriticalNesting = 9999;
/*-----------------------------------------------------------*/
/* Registers required to configure the RTI. */
#define portRTI_GCTRL_REG ( *( ( volatile uint32_t * ) 0xFFFFFC00 ) )
#define portRTI_TBCTRL_REG ( *( ( volatile uint32_t * ) 0xFFFFFC04 ) )
#define portRTI_COMPCTRL_REG ( *( ( volatile uint32_t * ) 0xFFFFFC0C ) )
#define portRTI_CNT0_FRC0_REG ( *( ( volatile uint32_t * ) 0xFFFFFC10 ) )
#define portRTI_CNT0_UC0_REG ( *( ( volatile uint32_t * ) 0xFFFFFC14 ) )
#define portRTI_CNT0_CPUC0_REG ( *( ( volatile uint32_t * ) 0xFFFFFC18 ) )
#define portRTI_CNT0_COMP0_REG ( *( ( volatile uint32_t * ) 0xFFFFFC50 ) )
#define portRTI_CNT0_UDCP0_REG ( *( ( volatile uint32_t * ) 0xFFFFFC54 ) )
#define portRTI_SETINTENA_REG ( *( ( volatile uint32_t * ) 0xFFFFFC80 ) )
#define portRTI_CLEARINTENA_REG ( *( ( volatile uint32_t * ) 0xFFFFFC84 ) )
#define portRTI_INTFLAG_REG ( *( ( volatile uint32_t * ) 0xFFFFFC88 ) )
#define portRTI_GCTRL_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC00 ) )
#define portRTI_TBCTRL_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC04 ) )
#define portRTI_COMPCTRL_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC0C ) )
#define portRTI_CNT0_FRC0_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC10 ) )
#define portRTI_CNT0_UC0_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC14 ) )
#define portRTI_CNT0_CPUC0_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC18 ) )
#define portRTI_CNT0_COMP0_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC50 ) )
#define portRTI_CNT0_UDCP0_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC54 ) )
#define portRTI_SETINTENA_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC80 ) )
#define portRTI_CLEARINTENA_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC84 ) )
#define portRTI_INTFLAG_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC88 ) )
/* Constants required to set up the initial stack of each task. */
#define portINITIAL_SPSR ( ( StackType_t ) 0x1F )
#define portINITIAL_FPSCR ( ( StackType_t ) 0x00 )
#define portINSTRUCTION_SIZE ( ( StackType_t ) 0x04 )
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINITIAL_SPSR ( ( StackType_t ) 0x1F )
#define portINITIAL_FPSCR ( ( StackType_t ) 0x00 )
#define portINSTRUCTION_SIZE ( ( StackType_t ) 0x04 )
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
/* The number of words on the stack frame between the saved Top Of Stack and
* R0 (in which the parameters are passed. */
#define portSPACE_BETWEEN_TOS_AND_PARAMETERS ( 12 )
R0 (in which the parameters are passed. */
#define portSPACE_BETWEEN_TOS_AND_PARAMETERS ( 12 )
/*-----------------------------------------------------------*/
@ -68,7 +68,7 @@ extern void vPortStartFirstTask( void );
/*-----------------------------------------------------------*/
/* Saved as part of the task context. Set to pdFALSE if the task does not
* require an FPU context. */
require an FPU context. */
uint32_t ulTaskHasFPUContext = 0;
/*-----------------------------------------------------------*/
@ -77,183 +77,181 @@ uint32_t ulTaskHasFPUContext = 0;
/*
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
StackType_t * pxOriginalTOS;
StackType_t *pxOriginalTOS;
pxOriginalTOS = pxTopOfStack;
pxOriginalTOS = pxTopOfStack;
#if __TI_VFP_SUPPORT__
{
/* Ensure the stack is correctly aligned on exit. */
pxTopOfStack--;
}
#endif
#if __TI_VFP_SUPPORT__
{
/* Ensure the stack is correctly aligned on exit. */
pxTopOfStack--;
}
#endif
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro. */
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro. */
/* First on the stack is the return address - which is the start of the as
* the task has not executed yet. The offset is added to make the return
* address appear as it would within an IRQ ISR. */
*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;
pxTopOfStack--;
/* First on the stack is the return address - which is the start of the as
the task has not executed yet. The offset is added to make the return
address appear as it would within an IRQ ISR. */
*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00000000; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00000000; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
pxTopOfStack--;
#ifdef portPRELOAD_TASK_REGISTERS
{
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
}
#else /* ifdef portPRELOAD_TASK_REGISTERS */
{
pxTopOfStack -= portSPACE_BETWEEN_TOS_AND_PARAMETERS;
}
#endif /* ifdef portPRELOAD_TASK_REGISTERS */
#ifdef portPRELOAD_TASK_REGISTERS
{
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
}
#else
{
pxTopOfStack -= portSPACE_BETWEEN_TOS_AND_PARAMETERS;
}
#endif
/* Function parameters are passed in R0. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* Function parameters are passed in R0. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* Set the status register for system mode, with interrupts enabled. */
*pxTopOfStack = ( StackType_t ) ( ( _get_CPSR() & ~0xFF ) | portINITIAL_SPSR );
/* Set the status register for system mode, with interrupts enabled. */
*pxTopOfStack = ( StackType_t ) ( ( _get_CPSR() & ~0xFF ) | portINITIAL_SPSR );
if( ( ( uint32_t ) pxCode & 0x01UL ) != 0x00 )
{
/* The task will start in thumb mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
if( ( ( uint32_t ) pxCode & 0x01UL ) != 0x00 )
{
/* The task will start in thumb mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
#ifdef __TI_VFP_SUPPORT__
{
pxTopOfStack--;
#ifdef __TI_VFP_SUPPORT__
{
pxTopOfStack--;
/* The last thing on the stack is the tasks ulUsingFPU value, which by
* default is set to indicate that the stack frame does not include FPU
* registers. */
*pxTopOfStack = pdFALSE;
}
#endif
/* The last thing on the stack is the tasks ulUsingFPU value, which by
default is set to indicate that the stack frame does not include FPU
registers. */
*pxTopOfStack = pdFALSE;
}
#endif
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
static void prvSetupTimerInterrupt( void )
static void prvSetupTimerInterrupt(void)
{
/* Disable timer 0. */
portRTI_GCTRL_REG &= 0xFFFFFFFEUL;
/* Disable timer 0. */
portRTI_GCTRL_REG &= 0xFFFFFFFEUL;
/* Use the internal counter. */
portRTI_TBCTRL_REG = 0x00000000U;
/* Use the internal counter. */
portRTI_TBCTRL_REG = 0x00000000U;
/* COMPSEL0 will use the RTIFRC0 counter. */
portRTI_COMPCTRL_REG = 0x00000000U;
/* COMPSEL0 will use the RTIFRC0 counter. */
portRTI_COMPCTRL_REG = 0x00000000U;
/* Initialise the counter and the prescale counter registers. */
portRTI_CNT0_UC0_REG = 0x00000000U;
portRTI_CNT0_FRC0_REG = 0x00000000U;
/* Initialise the counter and the prescale counter registers. */
portRTI_CNT0_UC0_REG = 0x00000000U;
portRTI_CNT0_FRC0_REG = 0x00000000U;
/* Set Prescalar for RTI clock. */
portRTI_CNT0_CPUC0_REG = 0x00000001U;
portRTI_CNT0_COMP0_REG = ( configCPU_CLOCK_HZ / 2 ) / configTICK_RATE_HZ;
portRTI_CNT0_UDCP0_REG = ( configCPU_CLOCK_HZ / 2 ) / configTICK_RATE_HZ;
/* Set Prescalar for RTI clock. */
portRTI_CNT0_CPUC0_REG = 0x00000001U;
portRTI_CNT0_COMP0_REG = ( configCPU_CLOCK_HZ / 2 ) / configTICK_RATE_HZ;
portRTI_CNT0_UDCP0_REG = ( configCPU_CLOCK_HZ / 2 ) / configTICK_RATE_HZ;
/* Clear interrupts. */
portRTI_INTFLAG_REG = 0x0007000FU;
portRTI_CLEARINTENA_REG = 0x00070F0FU;
/* Clear interrupts. */
portRTI_INTFLAG_REG = 0x0007000FU;
portRTI_CLEARINTENA_REG = 0x00070F0FU;
/* Enable the compare 0 interrupt. */
portRTI_SETINTENA_REG = 0x00000001U;
portRTI_GCTRL_REG |= 0x00000001U;
/* Enable the compare 0 interrupt. */
portRTI_SETINTENA_REG = 0x00000001U;
portRTI_GCTRL_REG |= 0x00000001U;
}
/*-----------------------------------------------------------*/
/*
* See header file for description.
*/
BaseType_t xPortStartScheduler( void )
BaseType_t xPortStartScheduler(void)
{
/* Start the timer that generates the tick ISR. */
prvSetupTimerInterrupt();
/* Start the timer that generates the tick ISR. */
prvSetupTimerInterrupt();
/* Reset the critical section nesting count read to execute the first task. */
ulCriticalNesting = 0;
/* Reset the critical section nesting count read to execute the first task. */
ulCriticalNesting = 0;
/* Start the first task. This is done from portASM.asm as ARM mode must be
* used. */
vPortStartFirstTask();
/* Start the first task. This is done from portASM.asm as ARM mode must be
used. */
vPortStartFirstTask();
/* Should not get here! */
return pdFAIL;
/* Should not get here! */
return pdFAIL;
}
/*-----------------------------------------------------------*/
/*
* See header file for description.
*/
void vPortEndScheduler( void )
void vPortEndScheduler(void)
{
/* Not implemented in ports where there is nothing to return to.
* Artificially force an assert. */
configASSERT( ulCriticalNesting == 1000UL );
/* Not implemented in ports where there is nothing to return to.
Artificially force an assert. */
configASSERT( ulCriticalNesting == 1000UL );
}
/*-----------------------------------------------------------*/
#if configUSE_PREEMPTION == 0
/* The cooperative scheduler requires a normal IRQ service routine to
* simply increment the system tick. */
__interrupt void vPortNonPreemptiveTick( void )
{
/* clear clock interrupt flag */
portRTI_INTFLAG_REG = 0x00000001;
/* The cooperative scheduler requires a normal IRQ service routine to
* simply increment the system tick. */
__interrupt void vPortNonPreemptiveTick( void )
{
/* clear clock interrupt flag */
portRTI_INTFLAG_REG = 0x00000001;
/* Increment the tick count - this may make a delaying task ready
* to run - but a context switch is not performed. */
xTaskIncrementTick();
}
/* Increment the tick count - this may make a delaying task ready
to run - but a context switch is not performed. */
xTaskIncrementTick();
}
#else /* if configUSE_PREEMPTION == 0 */
#else
/*
**************************************************************************
* The preemptive scheduler ISR is written in assembler and can be found
* in the portASM.asm file. This will only get used if portUSE_PREEMPTION
* is set to 1 in portmacro.h
**************************************************************************
*/
void vPortPreemptiveTick( void );
/*
**************************************************************************
* The preemptive scheduler ISR is written in assembler and can be found
* in the portASM.asm file. This will only get used if portUSE_PREEMPTION
* is set to 1 in portmacro.h
**************************************************************************
*/
void vPortPreemptiveTick( void );
#endif /* if configUSE_PREEMPTION == 0 */
#endif
/*-----------------------------------------------------------*/
@ -262,13 +260,13 @@ void vPortEndScheduler( void )
*/
void vPortEnterCritical( void )
{
/* Disable interrupts as per portDISABLE_INTERRUPTS(); */
portDISABLE_INTERRUPTS();
/* Disable interrupts as per portDISABLE_INTERRUPTS(); */
portDISABLE_INTERRUPTS();
/* Now interrupts are disabled ulCriticalNesting can be accessed
* directly. Increment ulCriticalNesting to keep a count of how many times
* portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* Now interrupts are disabled ulCriticalNesting can be accessed
directly. Increment ulCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
}
/*-----------------------------------------------------------*/
@ -278,36 +276,37 @@ void vPortEnterCritical( void )
*/
void vPortExitCritical( void )
{
if( ulCriticalNesting > 0 )
{
/* Decrement the nesting count as we are leaving a critical section. */
ulCriticalNesting--;
if( ulCriticalNesting > 0 )
{
/* Decrement the nesting count as we are leaving a critical section. */
ulCriticalNesting--;
/* If the nesting level has reached zero then interrupts should be
* re-enabled. */
if( ulCriticalNesting == 0 )
{
/* Enable interrupts as per portENABLE_INTERRUPTS(). */
portENABLE_INTERRUPTS();
}
}
/* If the nesting level has reached zero then interrupts should be
re-enabled. */
if( ulCriticalNesting == 0 )
{
/* Enable interrupts as per portENABLE_INTERRUPTS(). */
portENABLE_INTERRUPTS();
}
}
}
/*-----------------------------------------------------------*/
#if __TI_VFP_SUPPORT__
void vPortTaskUsesFPU( void )
{
extern void vPortInitialiseFPSCR( void );
void vPortTaskUsesFPU( void )
{
extern void vPortInitialiseFPSCR( void );
/* A task is registering the fact that it needs an FPU context. Set the
* FPU flag (saved as part of the task context. */
ulTaskHasFPUContext = pdTRUE;
/* A task is registering the fact that it needs an FPU context. Set the
FPU flag (saved as part of the task context. */
ulTaskHasFPUContext = pdTRUE;
/* Initialise the floating point status register. */
vPortInitialiseFPSCR();
}
/* Initialise the floating point status register. */
vPortInitialiseFPSCR();
}
#endif /* __TI_VFP_SUPPORT__ */
/*-----------------------------------------------------------*/

89
portable/CCS/ARM_Cortex-R4/portmacro.h
View file

@ -39,78 +39,79 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xFFFF
#if (configUSE_16_BIT_TICKS == 1)
typedef uint16_t TickType_t;
#define portMAX_DELAY (TickType_t) 0xFFFF
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xFFFFFFFFF
typedef uint32_t TickType_t;
#define portMAX_DELAY (TickType_t) 0xFFFFFFFFF
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
* not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
#endif
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portSTACK_GROWTH (-1)
#define portTICK_PERIOD_MS ((TickType_t) 1000 / configTICK_RATE_HZ)
#define portBYTE_ALIGNMENT 8
/* Critical section handling. */
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
#define portDISABLE_INTERRUPTS() asm ( " CPSID I" )
#define portENABLE_INTERRUPTS() asm ( " CPSIE I" )
extern void vPortEnterCritical(void);
extern void vPortExitCritical(void);
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
#define portDISABLE_INTERRUPTS() asm( " CPSID I" )
#define portENABLE_INTERRUPTS() asm( " CPSIE I" )
/* Scheduler utilities. */
#pragma SWI_ALIAS( vPortYield, 0 )
extern void vPortYield( void );
#define portYIELD() vPortYield()
#define portSYS_SSIR1_REG ( *( ( volatile uint32_t * ) 0xFFFFFFB0 ) )
#define portSYS_SSIR1_SSKEY ( 0x7500UL )
#define portYIELD_WITHIN_API() { portSYS_SSIR1_REG = portSYS_SSIR1_SSKEY; asm ( " DSB " ); asm ( " ISB " ); }
#define portYIELD_FROM_ISR( x ) if( x != pdFALSE ) { portSYS_SSIR1_REG = portSYS_SSIR1_SSKEY; ( void ) portSYS_SSIR1_REG; }
#define portYIELD() vPortYield()
#define portSYS_SSIR1_REG ( * ( ( volatile uint32_t * ) 0xFFFFFFB0 ) )
#define portSYS_SSIR1_SSKEY ( 0x7500UL )
#define portYIELD_WITHIN_API() { portSYS_SSIR1_REG = portSYS_SSIR1_SSKEY; asm( " DSB " ); asm( " ISB " ); }
#define portYIELD_FROM_ISR( x ) if( x != pdFALSE ){ portSYS_SSIR1_REG = portSYS_SSIR1_SSKEY; ( void ) portSYS_SSIR1_REG; }
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
/* Architecture specific optimisations. */
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
/* Check the configuration. */
#if ( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
/* Check the configuration. */
#if( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/*-----------------------------------------------------------*/
/*-----------------------------------------------------------*/
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __clz( ( uxReadyPriorities ) ) )
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __clz( ( uxReadyPriorities ) ) )
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION(vFunction, pvParameters) void vFunction(void *pvParameters)
#define portTASK_FUNCTION_PROTO(vFunction, pvParameters) void vFunction(void *pvParameters)
#endif /* __PORTMACRO_H__ */

97
portable/CCS/MSP430X/data_model.h
View file

@ -1,48 +1,53 @@
; /*
* ; * FreeRTOS Kernel V10.3.1
* ; * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
* ; *
* ; * Permission is hereby granted, free of charge, to any person obtaining a copy of
* ; * this software and associated documentation files (the "Software"), to deal in
* ; * the Software without restriction, including without limitation the rights to
* ; * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* ; * the Software, and to permit persons to whom the Software is furnished to do so,
* ; * subject to the following conditions:
* ; *
* ; * The above copyright notice and this permission notice shall be included in all
* ; * copies or substantial portions of the Software.
* ; *
* ; * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* ; * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* ; * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* ; * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* ; * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* ; * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
* ; *
* ; * http://www.FreeRTOS.org
* ; * http://aws.amazon.com/freertos
* ; *
* ; * 1 tab == 4 spaces!
* ; */
;/*
; * FreeRTOS Kernel V10.3.1
; * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
; *
; * Permission is hereby granted, free of charge, to any person obtaining a copy of
; * this software and associated documentation files (the "Software"), to deal in
; * the Software without restriction, including without limitation the rights to
; * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
; * the Software, and to permit persons to whom the Software is furnished to do so,
; * subject to the following conditions:
; *
; * The above copyright notice and this permission notice shall be included in all
; * copies or substantial portions of the Software.
; *
; * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
; * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
; * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
; * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
; * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
; * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
; *
; * http://www.FreeRTOS.org
; * http://aws.amazon.com/freertos
; *
; * 1 tab == 4 spaces!
; */
.if $DEFINED( __LARGE_DATA_MODEL__ )
.define "pushm.a", pushm_x
.define "popm.a", popm_x
.define "push.a", push_x
.define "pop.a", pop_x
.define "mov.a", mov_x
.else
.define "pushm.w", pushm_x
.define "popm.w", popm_x
.define "push.w", push_x
.define "pop.w", pop_x
.define "mov.w", mov_x
.endif
.if $DEFINED( __LARGE_CODE_MODEL__ )
.define "calla", call_x
.define "reta", ret_x
.else
.define "call", call_x
.define "ret", ret_x
.endif
.if $DEFINED( __LARGE_DATA_MODEL__ )
.define "pushm.a", pushm_x
.define "popm.a", popm_x
.define "push.a", push_x
.define "pop.a", pop_x
.define "mov.a", mov_x
.else
.define "pushm.w", pushm_x
.define "popm.w", popm_x
.define "push.w", push_x
.define "pop.w", pop_x
.define "mov.w", mov_x
.endif
.if $DEFINED( __LARGE_CODE_MODEL__ )
.define "calla", call_x
.define "reta", ret_x
.else
.define "call", call_x
.define "ret", ret_x
.endif

202
portable/CCS/MSP430X/port.c
View file

@ -30,28 +30,28 @@
#include "task.h"
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the MSP430X port.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the MSP430X port.
*----------------------------------------------------------*/
/* Constants required for hardware setup. The tick ISR runs off the ACLK,
* not the MCLK. */
#define portACLK_FREQUENCY_HZ ( ( TickType_t ) 32768 )
#define portINITIAL_CRITICAL_NESTING ( ( uint16_t ) 10 )
#define portFLAGS_INT_ENABLED ( ( StackType_t ) 0x08 )
not the MCLK. */
#define portACLK_FREQUENCY_HZ ( ( TickType_t ) 32768 )
#define portINITIAL_CRITICAL_NESTING ( ( uint16_t ) 10 )
#define portFLAGS_INT_ENABLED ( ( StackType_t ) 0x08 )
/* We require the address of the pxCurrentTCB variable, but don't want to know
* any details of its type. */
any details of its type. */
typedef void TCB_t;
extern volatile TCB_t * volatile pxCurrentTCB;
/* Each task maintains a count of the critical section nesting depth. Each
* time a critical section is entered the count is incremented. Each time a
* critical section is exited the count is decremented - with interrupts only
* being re-enabled if the count is zero.
*
* usCriticalNesting will get set to zero when the scheduler starts, but must
* not be initialised to zero as this will cause problems during the startup
* sequence. */
time a critical section is entered the count is incremented. Each time a
critical section is exited the count is decremented - with interrupts only
being re-enabled if the count is zero.
usCriticalNesting will get set to zero when the scheduler starts, but must
not be initialised to zero as this will cause problems during the startup
sequence. */
volatile uint16_t usCriticalNesting = portINITIAL_CRITICAL_NESTING;
/*-----------------------------------------------------------*/
@ -69,96 +69,94 @@ void vPortSetupTimerInterrupt( void );
*
* See the header file portable.h.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
uint16_t * pusTopOfStack;
uint32_t * pulTopOfStack, ulTemp;
uint16_t *pusTopOfStack;
uint32_t *pulTopOfStack, ulTemp;
/*
* Place a few bytes of known values on the bottom of the stack.
* This is just useful for debugging and can be included if required.
*
* pxTopOfStack = ( StackType_t ) 0x1111;
* pxTopOfStack--;
* pxTopOfStack = ( StackType_t ) 0x2222;
* pxTopOfStack--;
* pxTopOfStack = ( StackType_t ) 0x3333;
* pxTopOfStack--;
*/
/*
Place a few bytes of known values on the bottom of the stack.
This is just useful for debugging and can be included if required.
/* Data types are need either 16 bits or 32 bits depending on the data
* and code model used. */
if( sizeof( pxCode ) == sizeof( uint16_t ) )
{
pusTopOfStack = ( uint16_t * ) pxTopOfStack;
ulTemp = ( uint32_t ) pxCode;
*pusTopOfStack = ( uint16_t ) ulTemp;
}
else
{
/* Make room for a 20 bit value stored as a 32 bit value. */
pusTopOfStack = ( uint16_t * ) pxTopOfStack;
pusTopOfStack--;
pulTopOfStack = ( uint32_t * ) pusTopOfStack;
*pulTopOfStack = ( uint32_t ) pxCode;
}
*pxTopOfStack = ( StackType_t ) 0x1111;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x2222;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x3333;
pxTopOfStack--;
*/
pusTopOfStack--;
*pusTopOfStack = portFLAGS_INT_ENABLED;
pusTopOfStack -= ( sizeof( StackType_t ) / 2 );
/* Data types are need either 16 bits or 32 bits depending on the data
and code model used. */
if( sizeof( pxCode ) == sizeof( uint16_t ) )
{
pusTopOfStack = ( uint16_t * ) pxTopOfStack;
ulTemp = ( uint32_t ) pxCode;
*pusTopOfStack = ( uint16_t ) ulTemp;
}
else
{
/* Make room for a 20 bit value stored as a 32 bit value. */
pusTopOfStack = ( uint16_t * ) pxTopOfStack;
pusTopOfStack--;
pulTopOfStack = ( uint32_t * ) pusTopOfStack;
*pulTopOfStack = ( uint32_t ) pxCode;
}
/* From here on the size of stacked items depends on the memory model. */
pxTopOfStack = ( StackType_t * ) pusTopOfStack;
pusTopOfStack--;
*pusTopOfStack = portFLAGS_INT_ENABLED;
pusTopOfStack -= ( sizeof( StackType_t ) / 2 );
/* From here on the size of stacked items depends on the memory model. */
pxTopOfStack = ( StackType_t * ) pusTopOfStack;
/* Next the general purpose registers. */
#ifdef PRELOAD_REGISTER_VALUES
*pxTopOfStack = ( StackType_t ) 0xffff;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xeeee;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xdddd;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xbbbb;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xaaaa;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x9999;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x8888;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x5555;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x6666;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x5555;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x4444;
pxTopOfStack--;
#else /* ifdef PRELOAD_REGISTER_VALUES */
pxTopOfStack -= 3;
*pxTopOfStack = ( StackType_t ) pvParameters;
pxTopOfStack -= 9;
#endif /* ifdef PRELOAD_REGISTER_VALUES */
/* Next the general purpose registers. */
#ifdef PRELOAD_REGISTER_VALUES
*pxTopOfStack = ( StackType_t ) 0xffff;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xeeee;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xdddd;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xbbbb;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xaaaa;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x9999;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x8888;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x5555;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x6666;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x5555;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x4444;
pxTopOfStack--;
#else
pxTopOfStack -= 3;
*pxTopOfStack = ( StackType_t ) pvParameters;
pxTopOfStack -= 9;
#endif
/* A variable is used to keep track of the critical section nesting.
* This variable has to be stored as part of the task context and is
* initially set to zero. */
*pxTopOfStack = ( StackType_t ) portNO_CRITICAL_SECTION_NESTING;
/* A variable is used to keep track of the critical section nesting.
This variable has to be stored as part of the task context and is
initially set to zero. */
*pxTopOfStack = ( StackType_t ) portNO_CRITICAL_SECTION_NESTING;
/* Return a pointer to the top of the stack we have generated so this can
* be stored in the task control block for the task. */
return pxTopOfStack;
/* Return a pointer to the top of the stack we have generated so this can
be stored in the task control block for the task. */
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the MSP430 port will get stopped. If required simply
* disable the tick interrupt here. */
/* It is unlikely that the MSP430 port will get stopped. If required simply
disable the tick interrupt here. */
}
/*-----------------------------------------------------------*/
@ -167,21 +165,23 @@ void vPortEndScheduler( void )
*/
void vPortSetupTimerInterrupt( void )
{
vApplicationSetupTimerInterrupt();
vApplicationSetupTimerInterrupt();
}
/*-----------------------------------------------------------*/
#pragma vector=configTICK_VECTOR
interrupt void vTickISREntry( void )
{
extern void vPortTickISR( void );
extern void vPortTickISR( void );
__bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF );
#if configUSE_PREEMPTION == 1
extern void vPortPreemptiveTickISR( void );
vPortPreemptiveTickISR();
#else
extern void vPortCooperativeTickISR( void );
vPortCooperativeTickISR();
#endif
__bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF );
#if configUSE_PREEMPTION == 1
extern void vPortPreemptiveTickISR( void );
vPortPreemptiveTickISR();
#else
extern void vPortCooperativeTickISR( void );
vPortCooperativeTickISR();
#endif
}

115
portable/CCS/MSP430X/portmacro.h
View file

@ -42,72 +42,72 @@
#include "msp430.h"
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT int
#define portBASE_TYPE portSHORT
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT int
#define portBASE_TYPE portSHORT
/* The stack type changes depending on the data model. */
#ifdef __LARGE_DATA_MODEL__
#define portSTACK_TYPE uint32_t
#define portSTACK_TYPE uint32_t
#else
#define portSTACK_TYPE uint16_t
#define portPOINTER_SIZE_TYPE uint16_t
#define portSTACK_TYPE uint16_t
#define portPOINTER_SIZE_TYPE uint16_t
#endif
typedef portSTACK_TYPE StackType_t;
typedef short BaseType_t;
typedef unsigned short UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef short BaseType_t;
typedef unsigned short UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Interrupt control macros. */
#define portDISABLE_INTERRUPTS() _disable_interrupt(); _nop()
#define portENABLE_INTERRUPTS() _enable_interrupt(); _nop()
#define portDISABLE_INTERRUPTS() _disable_interrupt(); _nop()
#define portENABLE_INTERRUPTS() _enable_interrupt(); _nop()
/*-----------------------------------------------------------*/
/* Critical section control macros. */
#define portNO_CRITICAL_SECTION_NESTING ( ( uint16_t ) 0 )
#define portNO_CRITICAL_SECTION_NESTING ( ( uint16_t ) 0 )
#define portENTER_CRITICAL() \
{ \
extern volatile uint16_t usCriticalNesting; \
\
portDISABLE_INTERRUPTS(); \
\
/* Now interrupts are disabled usCriticalNesting can be accessed */ \
/* directly. Increment ulCriticalNesting to keep a count of how many */ \
/* times portENTER_CRITICAL() has been called. */ \
usCriticalNesting++; \
}
#define portENTER_CRITICAL() \
{ \
extern volatile uint16_t usCriticalNesting; \
\
portDISABLE_INTERRUPTS(); \
\
/* Now interrupts are disabled usCriticalNesting can be accessed */ \
/* directly. Increment ulCriticalNesting to keep a count of how many */ \
/* times portENTER_CRITICAL() has been called. */ \
usCriticalNesting++; \
}
#define portEXIT_CRITICAL() \
{ \
extern volatile uint16_t usCriticalNesting; \
\
if( usCriticalNesting > portNO_CRITICAL_SECTION_NESTING ) \
{ \
/* Decrement the nesting count as we are leaving a critical section. */ \
usCriticalNesting--; \
\
/* If the nesting level has reached zero then interrupts should be */ \
/* re-enabled. */ \
if( usCriticalNesting == portNO_CRITICAL_SECTION_NESTING ) \
{ \
portENABLE_INTERRUPTS(); \
} \
} \
}
#define portEXIT_CRITICAL() \
{ \
extern volatile uint16_t usCriticalNesting; \
\
if( usCriticalNesting > portNO_CRITICAL_SECTION_NESTING ) \
{ \
/* Decrement the nesting count as we are leaving a critical section. */ \
usCriticalNesting--; \
\
/* If the nesting level has reached zero then interrupts should be */ \
/* re-enabled. */ \
if( usCriticalNesting == portNO_CRITICAL_SECTION_NESTING ) \
{ \
portENABLE_INTERRUPTS(); \
} \
} \
}
/*-----------------------------------------------------------*/
/* Task utilities. */
@ -116,27 +116,28 @@ typedef unsigned short UBaseType_t;
* Manual context switch called by portYIELD or taskYIELD.
*/
extern void vPortYield( void );
#define portYIELD() vPortYield()
#define portYIELD() vPortYield()
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portBYTE_ALIGNMENT 2
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portNOP() __no_operation()
#define portBYTE_ALIGNMENT 2
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portNOP() __no_operation()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
extern void vTaskSwitchContext( void );
#define portYIELD_FROM_ISR( x ) if( x ) vPortYield()
#define portYIELD_FROM_ISR( x ) if( x ) vPortYield()
void vApplicationSetupTimerInterrupt( void );
/* sizeof( int ) != sizeof( long ) so a full printf() library is required if
* run time stats information is to be displayed. */
run time stats information is to be displayed. */
#define portLU_PRINTF_SPECIFIER_REQUIRED
#endif /* PORTMACRO_H */

168
portable/CodeWarrior/ColdFire_V1/port.c
View file

@ -30,158 +30,154 @@
#include "task.h"
#define portINITIAL_FORMAT_VECTOR ( ( StackType_t ) 0x4000 )
#define portINITIAL_FORMAT_VECTOR ( ( StackType_t ) 0x4000 )
/* Supervisor mode set. */
#define portINITIAL_STATUS_REGISTER ( ( StackType_t ) 0x2000 )
#define portINITIAL_STATUS_REGISTER ( ( StackType_t ) 0x2000)
/* The clock prescale into the timer peripheral. */
#define portPRESCALE_VALUE ( ( uint8_t ) 10 )
#define portPRESCALE_VALUE ( ( uint8_t ) 10 )
/* The clock frequency into the RTC. */
#define portRTC_CLOCK_HZ ( ( uint32_t ) 1000 )
#define portRTC_CLOCK_HZ ( ( uint32_t ) 1000 )
asm void interrupt VectorNumber_VL1swi vPortYieldISR( void );
static void prvSetupTimerInterrupt( void );
/* Used to keep track of the number of nested calls to taskENTER_CRITICAL(). This
* will be set to 0 prior to the first task being started. */
will be set to 0 prior to the first task being started. */
static uint32_t ulCriticalNesting = 0x9999UL;
/*-----------------------------------------------------------*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t * pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
uint32_t ulOriginalA5;
__asm {
MOVE.L A5, ulOriginalA5
};
uint32_t ulOriginalA5;
__asm{ MOVE.L A5, ulOriginalA5 };
*pxTopOfStack = ( StackType_t ) 0xDEADBEEF;
pxTopOfStack--;
*pxTopOfStack = (StackType_t) 0xDEADBEEF;
pxTopOfStack--;
/* Exception stack frame starts with the return address. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
/* Exception stack frame starts with the return address. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
*pxTopOfStack = ( portINITIAL_FORMAT_VECTOR << 16UL ) | ( portINITIAL_STATUS_REGISTER );
pxTopOfStack--;
*pxTopOfStack = ( portINITIAL_FORMAT_VECTOR << 16UL ) | ( portINITIAL_STATUS_REGISTER );
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x0; /*FP*/
pxTopOfStack -= 14; /* A5 to D0. */
*pxTopOfStack = ( StackType_t ) 0x0; /*FP*/
pxTopOfStack -= 14; /* A5 to D0. */
/* Parameter in A0. */
*( pxTopOfStack + 8 ) = ( StackType_t ) pvParameters;
/* Parameter in A0. */
*( pxTopOfStack + 8 ) = ( StackType_t ) pvParameters;
/* A5 must be maintained as it is resurved by the compiler. */
*( pxTopOfStack + 13 ) = ulOriginalA5;
/* A5 must be maintained as it is resurved by the compiler. */
*( pxTopOfStack + 13 ) = ulOriginalA5;
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
extern void vPortStartFirstTask( void );
extern void vPortStartFirstTask( void );
ulCriticalNesting = 0UL;
ulCriticalNesting = 0UL;
/* Configure a timer to generate the tick interrupt. */
prvSetupTimerInterrupt();
/* Configure a timer to generate the tick interrupt. */
prvSetupTimerInterrupt();
/* Start the first task executing. */
vPortStartFirstTask();
/* Start the first task executing. */
vPortStartFirstTask();
return pdFALSE;
return pdFALSE;
}
/*-----------------------------------------------------------*/
static void prvSetupTimerInterrupt( void )
{
/* Prescale by 1 - ie no prescale. */
RTCSC |= 8;
/* Compare match value. */
RTCMOD = portRTC_CLOCK_HZ / configTICK_RATE_HZ;
/* Enable the RTC to generate interrupts - interrupts are already disabled
* when this code executes. */
RTCSC_RTIE = 1;
{
/* Prescale by 1 - ie no prescale. */
RTCSC |= 8;
/* Compare match value. */
RTCMOD = portRTC_CLOCK_HZ / configTICK_RATE_HZ;
/* Enable the RTC to generate interrupts - interrupts are already disabled
when this code executes. */
RTCSC_RTIE = 1;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* Not implemented as there is nothing to return to. */
/* Not implemented as there is nothing to return to. */
}
/*-----------------------------------------------------------*/
void vPortEnterCritical( void )
{
if( ulCriticalNesting == 0UL )
{
/* Guard against context switches being pended simultaneously with a
* critical section being entered. */
do
{
portDISABLE_INTERRUPTS();
if( ulCriticalNesting == 0UL )
{
/* Guard against context switches being pended simultaneously with a
critical section being entered. */
do
{
portDISABLE_INTERRUPTS();
if( INTC_FRC == 0UL )
{
break;
}
if( INTC_FRC == 0UL )
{
break;
}
portENABLE_INTERRUPTS();
portENABLE_INTERRUPTS();
} while( 1 );
}
ulCriticalNesting++;
} while( 1 );
}
ulCriticalNesting++;
}
/*-----------------------------------------------------------*/
void vPortExitCritical( void )
{
ulCriticalNesting--;
if( ulCriticalNesting == 0 )
{
portENABLE_INTERRUPTS();
}
ulCriticalNesting--;
if( ulCriticalNesting == 0 )
{
portENABLE_INTERRUPTS();
}
}
/*-----------------------------------------------------------*/
void vPortYieldHandler( void )
{
uint32_t ulSavedInterruptMask;
uint32_t ulSavedInterruptMask;
ulSavedInterruptMask = portSET_INTERRUPT_MASK_FROM_ISR();
{
/* Note this will clear all forced interrupts - this is done for speed. */
INTC_CFRC = 0x3E;
vTaskSwitchContext();
}
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulSavedInterruptMask );
ulSavedInterruptMask = portSET_INTERRUPT_MASK_FROM_ISR();
{
/* Note this will clear all forced interrupts - this is done for speed. */
INTC_CFRC = 0x3E;
vTaskSwitchContext();
}
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulSavedInterruptMask );
}
/*-----------------------------------------------------------*/
void interrupt VectorNumber_Vrtc vPortTickISR( void )
{
uint32_t ulSavedInterruptMask;
uint32_t ulSavedInterruptMask;
/* Clear the interrupt. */
RTCSC |= RTCSC_RTIF_MASK;
/* Clear the interrupt. */
RTCSC |= RTCSC_RTIF_MASK;
/* Increment the RTOS tick. */
ulSavedInterruptMask = portSET_INTERRUPT_MASK_FROM_ISR();
{
if( xTaskIncrementTick() != pdFALSE )
{
taskYIELD();
}
}
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulSavedInterruptMask );
/* Increment the RTOS tick. */
ulSavedInterruptMask = portSET_INTERRUPT_MASK_FROM_ISR();
{
if( xTaskIncrementTick() != pdFALSE )
{
taskYIELD();
}
}
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulSavedInterruptMask );
}

94
portable/CodeWarrior/ColdFire_V1/portmacro.h
View file

@ -26,11 +26,11 @@
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,73 +43,73 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portBYTE_ALIGNMENT 4
#define portSTACK_GROWTH -1
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 4
#define portSTACK_GROWTH -1
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
/*-----------------------------------------------------------*/
uint32_t ulPortSetIPL( uint32_t );
#define portDISABLE_INTERRUPTS() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portENABLE_INTERRUPTS() ulPortSetIPL( 0 )
uint32_t ulPortSetIPL( uint32_t );
#define portDISABLE_INTERRUPTS() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portENABLE_INTERRUPTS() ulPortSetIPL( 0 )
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
extern UBaseType_t uxPortSetInterruptMaskFromISR( void );
extern void vPortClearInterruptMaskFromISR( UBaseType_t );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusRegister ) ulPortSetIPL( uxSavedStatusRegister )
extern UBaseType_t uxPortSetInterruptMaskFromISR( void );
extern void vPortClearInterruptMaskFromISR( UBaseType_t );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusRegister ) ulPortSetIPL( uxSavedStatusRegister )
/*-----------------------------------------------------------*/
/* Task utilities. */
#define portNOP() asm volatile ( "nop" )
#define portNOP() asm volatile ( "nop" )
/* Context switches are requested using the force register. */
#define portYIELD() INTC_SFRC = 0x3E; portNOP(); portNOP(); portNOP(); portNOP(); portNOP()
#define portYIELD() INTC_SFRC = 0x3E; portNOP(); portNOP(); portNOP(); portNOP(); portNOP()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters ) __attribute__( ( noreturn ) )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) __attribute__((noreturn))
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
/*-----------------------------------------------------------*/
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
if( xSwitchRequired != pdFALSE ) \
{ \
portYIELD(); \
}
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) \
{ \
portYIELD(); \
}
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

125
portable/CodeWarrior/ColdFire_V2/port.c
View file

@ -30,52 +30,50 @@
#include "task.h"
#define portINITIAL_FORMAT_VECTOR ( ( StackType_t ) 0x4000 )
#define portINITIAL_FORMAT_VECTOR ( ( StackType_t ) 0x4000 )
/* Supervisor mode set. */
#define portINITIAL_STATUS_REGISTER ( ( StackType_t ) 0x2000 )
#define portINITIAL_STATUS_REGISTER ( ( StackType_t ) 0x2000)
/* Used to keep track of the number of nested calls to taskENTER_CRITICAL(). This
* will be set to 0 prior to the first task being started. */
will be set to 0 prior to the first task being started. */
static uint32_t ulCriticalNesting = 0x9999UL;
#define portSAVE_CONTEXT() \
lea.l( -60, % sp ), % sp; \
movem.l % d0 - % fp, ( % sp ); \
move.l pxCurrentTCB, % a0; \
move.l % sp, ( % a0 );
#define portSAVE_CONTEXT() \
lea.l (-60, %sp), %sp; \
movem.l %d0-%fp, (%sp); \
move.l pxCurrentTCB, %a0; \
move.l %sp, (%a0);
#define portRESTORE_CONTEXT() \
move.l pxCurrentTCB, % a0; \
move.l( % a0 ), % sp; \
movem.l( % sp ), % d0 - % fp; \
lea.l % sp@( 60 ), % sp; \
rte
#define portRESTORE_CONTEXT() \
move.l pxCurrentTCB, %a0; \
move.l (%a0), %sp; \
movem.l (%sp), %d0-%fp; \
lea.l %sp@(60), %sp; \
rte
/*-----------------------------------------------------------*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t * pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
*pxTopOfStack = ( StackType_t ) pvParameters;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xDEADBEEF;
pxTopOfStack--;
*pxTopOfStack = (StackType_t) 0xDEADBEEF;
pxTopOfStack--;
/* Exception stack frame starts with the return address. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
/* Exception stack frame starts with the return address. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
*pxTopOfStack = ( portINITIAL_FORMAT_VECTOR << 16UL ) | ( portINITIAL_STATUS_REGISTER );
pxTopOfStack--;
*pxTopOfStack = ( portINITIAL_FORMAT_VECTOR << 16UL ) | ( portINITIAL_STATUS_REGISTER );
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x0; /*FP*/
pxTopOfStack -= 14; /* A5 to D0. */
*pxTopOfStack = ( StackType_t ) 0x0; /*FP*/
pxTopOfStack -= 14; /* A5 to D0. */
return pxTopOfStack;
}
@ -83,68 +81,67 @@ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
BaseType_t xPortStartScheduler( void )
{
extern void vPortStartFirstTask( void );
extern void vPortStartFirstTask( void );
ulCriticalNesting = 0UL;
ulCriticalNesting = 0UL;
/* Configure the interrupts used by this port. */
vApplicationSetupInterrupts();
/* Configure the interrupts used by this port. */
vApplicationSetupInterrupts();
/* Start the first task executing. */
vPortStartFirstTask();
/* Start the first task executing. */
vPortStartFirstTask();
return pdFALSE;
return pdFALSE;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* Not implemented as there is nothing to return to. */
/* Not implemented as there is nothing to return to. */
}
/*-----------------------------------------------------------*/
void vPortEnterCritical( void )
{
if( ulCriticalNesting == 0UL )
{
/* Guard against context switches being pended simultaneously with a
* critical section being entered. */
do
{
portDISABLE_INTERRUPTS();
if( ulCriticalNesting == 0UL )
{
/* Guard against context switches being pended simultaneously with a
critical section being entered. */
do
{
portDISABLE_INTERRUPTS();
if( MCF_INTC0_INTFRCH == 0UL )
{
break;
}
if( MCF_INTC0_INTFRCH == 0UL )
{
break;
}
portENABLE_INTERRUPTS();
portENABLE_INTERRUPTS();
} while( 1 );
}
ulCriticalNesting++;
} while( 1 );
}
ulCriticalNesting++;
}
/*-----------------------------------------------------------*/
void vPortExitCritical( void )
{
ulCriticalNesting--;
if( ulCriticalNesting == 0 )
{
portENABLE_INTERRUPTS();
}
ulCriticalNesting--;
if( ulCriticalNesting == 0 )
{
portENABLE_INTERRUPTS();
}
}
/*-----------------------------------------------------------*/
void vPortYieldHandler( void )
{
uint32_t ulSavedInterruptMask;
uint32_t ulSavedInterruptMask;
ulSavedInterruptMask = portSET_INTERRUPT_MASK_FROM_ISR();
/* Note this will clear all forced interrupts - this is done for speed. */
MCF_INTC0_INTFRCL = 0;
vTaskSwitchContext();
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulSavedInterruptMask );
ulSavedInterruptMask = portSET_INTERRUPT_MASK_FROM_ISR();
/* Note this will clear all forced interrupts - this is done for speed. */
MCF_INTC0_INTFRCL = 0;
vTaskSwitchContext();
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulSavedInterruptMask );
}
/*-----------------------------------------------------------*/

94
portable/CodeWarrior/ColdFire_V2/portmacro.h
View file

@ -26,11 +26,11 @@
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,72 +43,72 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portBYTE_ALIGNMENT 4
#define portSTACK_GROWTH -1
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 4
#define portSTACK_GROWTH -1
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
/*-----------------------------------------------------------*/
uint32_t ulPortSetIPL( uint32_t );
#define portDISABLE_INTERRUPTS() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portENABLE_INTERRUPTS() ulPortSetIPL( 0 )
uint32_t ulPortSetIPL( uint32_t );
#define portDISABLE_INTERRUPTS() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portENABLE_INTERRUPTS() ulPortSetIPL( 0 )
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
extern UBaseType_t uxPortSetInterruptMaskFromISR( void );
extern void vPortClearInterruptMaskFromISR( UBaseType_t );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusRegister ) ulPortSetIPL( uxSavedStatusRegister )
extern UBaseType_t uxPortSetInterruptMaskFromISR( void );
extern void vPortClearInterruptMaskFromISR( UBaseType_t );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusRegister ) ulPortSetIPL( uxSavedStatusRegister )
/*-----------------------------------------------------------*/
/* Task utilities. */
#define portNOP() asm volatile ( "nop" )
#define portNOP() asm volatile ( "nop" )
/* Note this will overwrite all other bits in the force register, it is done this way for speed. */
#define portYIELD() MCF_INTC0_INTFRCL = ( 1UL << configYIELD_INTERRUPT_VECTOR ); portNOP(); portNOP() /* -32 as we are using the high word of the 64bit mask. */
#define portYIELD() MCF_INTC0_INTFRCL = ( 1UL << configYIELD_INTERRUPT_VECTOR ); portNOP(); portNOP() /* -32 as we are using the high word of the 64bit mask. */
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters ) __attribute__( ( noreturn ) )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) __attribute__((noreturn))
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
/*-----------------------------------------------------------*/
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
if( xSwitchRequired != pdFALSE ) \
{ \
portYIELD(); \
}
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) \
{ \
portYIELD(); \
}
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

240
portable/CodeWarrior/HCS12/port.c
View file

@ -31,139 +31,137 @@
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the HCS12 port.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the HCS12 port.
*----------------------------------------------------------*/
/*
* Configure a timer to generate the RTOS tick at the frequency specified
* Configure a timer to generate the RTOS tick at the frequency specified
* within FreeRTOSConfig.h.
*/
static void prvSetupTimerInterrupt( void );
/* Interrupt service routines have to be in non-banked memory - as does the
* scheduler startup function. */
scheduler startup function. */
#pragma CODE_SEG __NEAR_SEG NON_BANKED
/* Manual context switch function. This is the SWI ISR. */
void interrupt vPortYield( void );
/* Manual context switch function. This is the SWI ISR. */
void interrupt vPortYield( void );
/* Tick context switch function. This is the timer ISR. */
void interrupt vPortTickInterrupt( void );
/* Simply called by xPortStartScheduler(). xPortStartScheduler() does not
* start the scheduler directly because the header file containing the
* xPortStartScheduler() prototype is part of the common kernel code, and
* therefore cannot use the CODE_SEG pragma. */
static BaseType_t xBankedStartScheduler( void );
/* Tick context switch function. This is the timer ISR. */
void interrupt vPortTickInterrupt( void );
/* Simply called by xPortStartScheduler(). xPortStartScheduler() does not
start the scheduler directly because the header file containing the
xPortStartScheduler() prototype is part of the common kernel code, and
therefore cannot use the CODE_SEG pragma. */
static BaseType_t xBankedStartScheduler( void );
#pragma CODE_SEG DEFAULT
/* Calls to portENTER_CRITICAL() can be nested. When they are nested the
* critical section should not be left (i.e. interrupts should not be re-enabled)
* until the nesting depth reaches 0. This variable simply tracks the nesting
* depth. Each task maintains it's own critical nesting depth variable so
* uxCriticalNesting is saved and restored from the task stack during a context
* switch. */
/* Calls to portENTER_CRITICAL() can be nested. When they are nested the
critical section should not be left (i.e. interrupts should not be re-enabled)
until the nesting depth reaches 0. This variable simply tracks the nesting
depth. Each task maintains it's own critical nesting depth variable so
uxCriticalNesting is saved and restored from the task stack during a context
switch. */
volatile UBaseType_t uxCriticalNesting = 0xff;
/*-----------------------------------------------------------*/
/*
* See header file for description.
/*
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
/*
* Place a few bytes of known values on the bottom of the stack.
* This can be uncommented to provide useful stack markers when debugging.
*
* pxTopOfStack = ( StackType_t ) 0x11;
* pxTopOfStack--;
* pxTopOfStack = ( StackType_t ) 0x22;
* pxTopOfStack--;
* pxTopOfStack = ( StackType_t ) 0x33;
* pxTopOfStack--;
*/
/*
Place a few bytes of known values on the bottom of the stack.
This can be uncommented to provide useful stack markers when debugging.
*pxTopOfStack = ( StackType_t ) 0x11;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x22;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x33;
pxTopOfStack--;
*/
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro. In this case the stack as
* expected by the HCS12 RTI instruction. */
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro. In this case the stack as
expected by the HCS12 RTI instruction. */
/* The address of the task function is placed in the stack byte at a time. */
*pxTopOfStack = ( StackType_t ) *( ( ( StackType_t * ) ( &pxCode ) ) + 1 );
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) *( ( ( StackType_t * ) ( &pxCode ) ) + 0 );
pxTopOfStack--;
/* The address of the task function is placed in the stack byte at a time. */
*pxTopOfStack = ( StackType_t ) *( ((StackType_t *) (&pxCode) ) + 1 );
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) *( ((StackType_t *) (&pxCode) ) + 0 );
pxTopOfStack--;
/* Next are all the registers that form part of the task context. */
/* Next are all the registers that form part of the task context. */
/* Y register */
*pxTopOfStack = ( StackType_t ) 0xff;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xee;
pxTopOfStack--;
/* Y register */
*pxTopOfStack = ( StackType_t ) 0xff;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xee;
pxTopOfStack--;
/* X register */
*pxTopOfStack = ( StackType_t ) 0xdd;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xcc;
pxTopOfStack--;
/* X register */
*pxTopOfStack = ( StackType_t ) 0xdd;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xcc;
pxTopOfStack--;
/* A register contains parameter high byte. */
*pxTopOfStack = ( StackType_t ) *( ((StackType_t *) (&pvParameters) ) + 0 );
pxTopOfStack--;
/* A register contains parameter high byte. */
*pxTopOfStack = ( StackType_t ) *( ( ( StackType_t * ) ( &pvParameters ) ) + 0 );
pxTopOfStack--;
/* B register contains parameter low byte. */
*pxTopOfStack = ( StackType_t ) *( ((StackType_t *) (&pvParameters) ) + 1 );
pxTopOfStack--;
/* B register contains parameter low byte. */
*pxTopOfStack = ( StackType_t ) *( ( ( StackType_t * ) ( &pvParameters ) ) + 1 );
pxTopOfStack--;
/* CCR: Note that when the task starts interrupts will be enabled since
"I" bit of CCR is cleared */
*pxTopOfStack = ( StackType_t ) 0x00;
pxTopOfStack--;
#ifdef BANKED_MODEL
/* The page of the task. */
*pxTopOfStack = ( StackType_t ) ( ( int ) pxCode );
pxTopOfStack--;
#endif
/* Finally the critical nesting depth is initialised with 0 (not within
a critical section). */
*pxTopOfStack = ( StackType_t ) 0x00;
/* CCR: Note that when the task starts interrupts will be enabled since
* "I" bit of CCR is cleared */
*pxTopOfStack = ( StackType_t ) 0x00;
pxTopOfStack--;
#ifdef BANKED_MODEL
/* The page of the task. */
*pxTopOfStack = ( StackType_t ) ( ( int ) pxCode );
pxTopOfStack--;
#endif
/* Finally the critical nesting depth is initialised with 0 (not within
* a critical section). */
*pxTopOfStack = ( StackType_t ) 0x00;
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the HCS12 port will get stopped. */
/* It is unlikely that the HCS12 port will get stopped. */
}
/*-----------------------------------------------------------*/
static void prvSetupTimerInterrupt( void )
{
TickTimer_SetFreqHz( configTICK_RATE_HZ );
TickTimer_Enable();
TickTimer_SetFreqHz( configTICK_RATE_HZ );
TickTimer_Enable();
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* xPortStartScheduler() does not start the scheduler directly because
* the header file containing the xPortStartScheduler() prototype is part
* of the common kernel code, and therefore cannot use the CODE_SEG pragma.
* Instead it simply calls the locally defined xBankedStartScheduler() -
* which does use the CODE_SEG pragma. */
/* xPortStartScheduler() does not start the scheduler directly because
the header file containing the xPortStartScheduler() prototype is part
of the common kernel code, and therefore cannot use the CODE_SEG pragma.
Instead it simply calls the locally defined xBankedStartScheduler() -
which does use the CODE_SEG pragma. */
return xBankedStartScheduler();
return xBankedStartScheduler();
}
/*-----------------------------------------------------------*/
@ -171,18 +169,18 @@ BaseType_t xPortStartScheduler( void )
static BaseType_t xBankedStartScheduler( void )
{
/* Configure the timer that will generate the RTOS tick. Interrupts are
* disabled when this function is called. */
prvSetupTimerInterrupt();
/* Configure the timer that will generate the RTOS tick. Interrupts are
disabled when this function is called. */
prvSetupTimerInterrupt();
/* Restore the context of the first task. */
portRESTORE_CONTEXT();
/* Restore the context of the first task. */
portRESTORE_CONTEXT();
/* Simulate the end of an interrupt to start the scheduler off. */
__asm( "rti" );
/* Simulate the end of an interrupt to start the scheduler off. */
__asm( "rti" );
/* Should not get here! */
return pdFALSE;
/* Should not get here! */
return pdFALSE;
}
/*-----------------------------------------------------------*/
@ -196,42 +194,44 @@ static BaseType_t xBankedStartScheduler( void )
*/
void interrupt vPortYield( void )
{
portSAVE_CONTEXT();
vTaskSwitchContext();
portRESTORE_CONTEXT();
portSAVE_CONTEXT();
vTaskSwitchContext();
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
/*
* RTOS tick interrupt service routine. If the cooperative scheduler is
* being used then this simply increments the tick count. If the
* RTOS tick interrupt service routine. If the cooperative scheduler is
* being used then this simply increments the tick count. If the
* preemptive scheduler is being used a context switch can occur.
*/
void interrupt vPortTickInterrupt( void )
{
#if configUSE_PREEMPTION == 1
{
/* A context switch might happen so save the context. */
portSAVE_CONTEXT();
#if configUSE_PREEMPTION == 1
{
/* A context switch might happen so save the context. */
portSAVE_CONTEXT();
/* Increment the tick ... */
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
/* Increment the tick ... */
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
TFLG1 = 1;
TFLG1 = 1;
/* Restore the context of a task - which may be a different task
* to that interrupted. */
portRESTORE_CONTEXT();
}
#else /* if configUSE_PREEMPTION == 1 */
{
xTaskIncrementTick();
TFLG1 = 1;
}
#endif /* if configUSE_PREEMPTION == 1 */
/* Restore the context of a task - which may be a different task
to that interrupted. */
portRESTORE_CONTEXT();
}
#else
{
xTaskIncrementTick();
TFLG1 = 1;
}
#endif
}
#pragma CODE_SEG DEFAULT

212
portable/CodeWarrior/HCS12/portmacro.h
View file

@ -40,38 +40,38 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portBYTE_ALIGNMENT 1
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portYIELD() __asm( "swi" );
#define portNOP() __asm( "nop" );
#define portBYTE_ALIGNMENT 1
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portYIELD() __asm( "swi" );
#define portNOP() __asm( "nop" );
/*-----------------------------------------------------------*/
/* Critical section handling. */
#define portENABLE_INTERRUPTS() __asm( "cli" )
#define portDISABLE_INTERRUPTS() __asm( "sei" )
#define portENABLE_INTERRUPTS() __asm( "cli" )
#define portDISABLE_INTERRUPTS() __asm( "sei" )
/*
* Disable interrupts before incrementing the count of critical section nesting.
@ -79,29 +79,29 @@ typedef unsigned char UBaseType_t;
* re-enabled. Once interrupts are disabled the nesting count can be accessed
* directly. Each task maintains its own nesting count.
*/
#define portENTER_CRITICAL() \
{ \
extern volatile UBaseType_t uxCriticalNesting; \
\
portDISABLE_INTERRUPTS(); \
uxCriticalNesting++; \
}
#define portENTER_CRITICAL() \
{ \
extern volatile UBaseType_t uxCriticalNesting; \
\
portDISABLE_INTERRUPTS(); \
uxCriticalNesting++; \
}
/*
* Interrupts are disabled so we can access the nesting count directly. If the
* nesting is found to be 0 (no nesting) then we are leaving the critical
* section and interrupts can be re-enabled.
*/
#define portEXIT_CRITICAL() \
{ \
extern volatile UBaseType_t uxCriticalNesting; \
\
uxCriticalNesting--; \
if( uxCriticalNesting == 0 ) \
{ \
portENABLE_INTERRUPTS(); \
} \
}
#define portEXIT_CRITICAL() \
{ \
extern volatile UBaseType_t uxCriticalNesting; \
\
uxCriticalNesting--; \
if( uxCriticalNesting == 0 ) \
{ \
portENABLE_INTERRUPTS(); \
} \
}
/*-----------------------------------------------------------*/
/* Task utilities. */
@ -117,71 +117,70 @@ typedef unsigned char UBaseType_t;
*/
#ifdef BANKED_MODEL
/*
* Load the stack pointer for the task, then pull the critical nesting
* count and PPAGE register from the stack. The remains of the
* context are restored by the RTI instruction.
*/
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * pxCurrentTCB; \
extern volatile UBaseType_t uxCriticalNesting; \
\
__asm( "ldx pxCurrentTCB" ); \
__asm( "lds 0, x" ); \
__asm( "pula" ); \
__asm( "staa uxCriticalNesting" ); \
__asm( "pula" ); \
__asm( "staa 0x30" ); /* 0x30 = PPAGE */ \
}
/*
* Load the stack pointer for the task, then pull the critical nesting
* count and PPAGE register from the stack. The remains of the
* context are restored by the RTI instruction.
*/
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * pxCurrentTCB; \
extern volatile UBaseType_t uxCriticalNesting; \
\
__asm( "ldx pxCurrentTCB" ); \
__asm( "lds 0, x" ); \
__asm( "pula" ); \
__asm( "staa uxCriticalNesting" ); \
__asm( "pula" ); \
__asm( "staa 0x30" ); /* 0x30 = PPAGE */ \
}
/*
* By the time this macro is called the processor has already stacked the
* registers. Simply stack the nesting count and PPAGE value, then save
* the task stack pointer.
*/
#define portSAVE_CONTEXT() \
{ \
extern volatile void * pxCurrentTCB; \
extern volatile UBaseType_t uxCriticalNesting; \
\
__asm( "ldaa 0x30" ); /* 0x30 = PPAGE */ \
__asm( "psha" ); \
__asm( "ldaa uxCriticalNesting" ); \
__asm( "psha" ); \
__asm( "ldx pxCurrentTCB" ); \
__asm( "sts 0, x" ); \
}
#else
/*
* By the time this macro is called the processor has already stacked the
* registers. Simply stack the nesting count and PPAGE value, then save
* the task stack pointer.
*/
#define portSAVE_CONTEXT() \
{ \
extern volatile void * pxCurrentTCB; \
extern volatile UBaseType_t uxCriticalNesting; \
\
__asm( "ldaa 0x30" ); /* 0x30 = PPAGE */ \
__asm( "psha" ); \
__asm( "ldaa uxCriticalNesting" ); \
__asm( "psha" ); \
__asm( "ldx pxCurrentTCB" ); \
__asm( "sts 0, x" ); \
}
#else /* ifdef BANKED_MODEL */
/*
* These macros are as per the BANKED versions above, but without saving
* and restoring the PPAGE register.
*/
/*
* These macros are as per the BANKED versions above, but without saving
* and restoring the PPAGE register.
*/
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * pxCurrentTCB; \
extern volatile UBaseType_t uxCriticalNesting; \
\
__asm( "ldx pxCurrentTCB" ); \
__asm( "lds 0, x" ); \
__asm( "pula" ); \
__asm( "staa uxCriticalNesting" ); \
}
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * pxCurrentTCB; \
extern volatile UBaseType_t uxCriticalNesting; \
\
__asm( "ldx pxCurrentTCB" ); \
__asm( "lds 0, x" ); \
__asm( "pula" ); \
__asm( "staa uxCriticalNesting" ); \
}
#define portSAVE_CONTEXT() \
{ \
extern volatile void * pxCurrentTCB; \
extern volatile UBaseType_t uxCriticalNesting; \
\
__asm( "ldaa uxCriticalNesting" ); \
__asm( "psha" ); \
__asm( "ldx pxCurrentTCB" ); \
__asm( "sts 0, x" ); \
}
#endif /* ifdef BANKED_MODEL */
#define portSAVE_CONTEXT() \
{ \
extern volatile void * pxCurrentTCB; \
extern volatile UBaseType_t uxCriticalNesting; \
\
__asm( "ldaa uxCriticalNesting" ); \
__asm( "psha" ); \
__asm( "ldx pxCurrentTCB" ); \
__asm( "sts 0, x" ); \
}
#endif
/*
* Utility macro to call macros above in correct order in order to perform a
@ -189,14 +188,15 @@ typedef unsigned char UBaseType_t;
* the ISR does not use any local (stack) variables. If the ISR uses stack
* variables portYIELD() should be used in it's place.
*/
#define portTASK_SWITCH_FROM_ISR() \
portSAVE_CONTEXT(); \
vTaskSwitchContext(); \
portRESTORE_CONTEXT();
#define portTASK_SWITCH_FROM_ISR() \
portSAVE_CONTEXT(); \
vTaskSwitchContext(); \
portRESTORE_CONTEXT();
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#endif /* PORTMACRO_H */

1
portable/Common/mpu_wrappers.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*

277
portable/GCC/ARM7_AT91FR40008/port.c
View file

@ -27,13 +27,13 @@
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the Atmel AT91R40008
* port.
*
* Components that can be compiled to either ARM or THUMB mode are
* contained in this file. The ISR routines, which can only be compiled
* to ARM mode are contained in portISR.c.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the Atmel AT91R40008
* port.
*
* Components that can be compiled to either ARM or THUMB mode are
* contained in this file. The ISR routines, which can only be compiled
* to ARM mode are contained in portISR.c.
*----------------------------------------------------------*/
/* Standard includes. */
#include <stdlib.h>
@ -49,126 +49,124 @@
#include "tc.h"
/* Constants required to setup the task context. */
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINSTRUCTION_SIZE ( ( StackType_t ) 4 )
#define portNO_CRITICAL_SECTION_NESTING ( ( StackType_t ) 0 )
#define portTICK_PRIORITY_6 ( 6 )
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINSTRUCTION_SIZE ( ( StackType_t ) 4 )
#define portNO_CRITICAL_SECTION_NESTING ( ( StackType_t ) 0 )
#define portTICK_PRIORITY_6 ( 6 )
/*-----------------------------------------------------------*/
/* Setup the timer to generate the tick interrupts. */
static void prvSetupTimerInterrupt( void );
/*
* The scheduler can only be started from ARM mode, so
* vPortISRStartFirstSTask() is defined in portISR.c.
/*
* The scheduler can only be started from ARM mode, so
* vPortISRStartFirstSTask() is defined in portISR.c.
*/
extern void vPortISRStartFirstTask( void );
/*-----------------------------------------------------------*/
/*
* Initialise the stack of a task to look exactly as if a call to
/*
* Initialise the stack of a task to look exactly as if a call to
* portSAVE_CONTEXT had been called.
*
* See header file for description.
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
StackType_t * pxOriginalTOS;
StackType_t *pxOriginalTOS;
pxOriginalTOS = pxTopOfStack;
pxOriginalTOS = pxTopOfStack;
/* To ensure asserts in tasks.c don't fail, although in this case the assert
is not really required. */
pxTopOfStack--;
/* To ensure asserts in tasks.c don't fail, although in this case the assert
* is not really required. */
pxTopOfStack--;
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro. */
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro. */
/* First on the stack is the return address - which in this case is the
start of the task. The offset is added to make the return address appear
as it would within an IRQ ISR. */
*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;
pxTopOfStack--;
/* First on the stack is the return address - which in this case is the
* start of the task. The offset is added to make the return address appear
* as it would within an IRQ ISR. */
*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xaaaaaaaa; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xaaaaaaaa; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
/* When the task starts is will expect to find the function parameter in
R0. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* When the task starts is will expect to find the function parameter in
* R0. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* The last thing onto the stack is the status register, which is set for
system mode, with interrupts enabled. */
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
/* The last thing onto the stack is the status register, which is set for
* system mode, with interrupts enabled. */
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
#ifdef THUMB_INTERWORK
{
/* We want the task to start in thumb mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
#endif
#ifdef THUMB_INTERWORK
{
/* We want the task to start in thumb mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
#endif
pxTopOfStack--;
pxTopOfStack--;
/* Some optimisation levels use the stack differently to others. This
means the interrupt flags cannot always be stored on the stack and will
instead be stored in a variable, which is then saved as part of the
tasks context. */
*pxTopOfStack = portNO_CRITICAL_SECTION_NESTING;
/* Some optimisation levels use the stack differently to others. This
* means the interrupt flags cannot always be stored on the stack and will
* instead be stored in a variable, which is then saved as part of the
* tasks context. */
*pxTopOfStack = portNO_CRITICAL_SECTION_NESTING;
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* Start the timer that generates the tick ISR. Interrupts are disabled
* here already. */
prvSetupTimerInterrupt();
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Start the first task. */
vPortISRStartFirstTask();
/* Start the first task. */
vPortISRStartFirstTask();
/* Should not get here! */
return 0;
/* Should not get here! */
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the ARM port will require this function as there
* is nothing to return to. */
/* It is unlikely that the ARM port will require this function as there
is nothing to return to. */
}
/*-----------------------------------------------------------*/
@ -177,63 +175,64 @@ void vPortEndScheduler( void )
*/
static void prvSetupTimerInterrupt( void )
{
volatile uint32_t ulDummy;
volatile uint32_t ulDummy;
/* Enable clock to the tick timer... */
AT91C_BASE_PS->PS_PCER = portTIMER_CLK_ENABLE_BIT;
/* Enable clock to the tick timer... */
AT91C_BASE_PS->PS_PCER = portTIMER_CLK_ENABLE_BIT;
/* Stop the tick timer... */
portTIMER_REG_BASE_PTR->TC_CCR = TC_CLKDIS;
/* Stop the tick timer... */
portTIMER_REG_BASE_PTR->TC_CCR = TC_CLKDIS;
/* Start with tick timer interrupts disabled... */
portTIMER_REG_BASE_PTR->TC_IDR = 0xFFFFFFFF;
/* Start with tick timer interrupts disabled... */
portTIMER_REG_BASE_PTR->TC_IDR = 0xFFFFFFFF;
/* Clear any pending tick timer interrupts... */
ulDummy = portTIMER_REG_BASE_PTR->TC_SR;
/* Clear any pending tick timer interrupts... */
ulDummy = portTIMER_REG_BASE_PTR->TC_SR;
/* Store interrupt handler function address in tick timer vector register...
* The ISR installed depends on whether the preemptive or cooperative
* scheduler is being used. */
#if configUSE_PREEMPTION == 1
{
extern void( vPreemptiveTick )( void );
AT91C_BASE_AIC->AIC_SVR[ portTIMER_AIC_CHANNEL ] = ( uint32_t ) vPreemptiveTick;
}
#else // else use cooperative scheduler
{
extern void( vNonPreemptiveTick )( void );
AT91C_BASE_AIC->AIC_SVR[ portTIMER_AIC_CHANNEL ] = ( uint32_t ) vNonPreemptiveTick;
}
#endif
/* Store interrupt handler function address in tick timer vector register...
The ISR installed depends on whether the preemptive or cooperative
scheduler is being used. */
#if configUSE_PREEMPTION == 1
{
extern void ( vPreemptiveTick )( void );
AT91C_BASE_AIC->AIC_SVR[portTIMER_AIC_CHANNEL] = ( uint32_t ) vPreemptiveTick;
}
#else // else use cooperative scheduler
{
extern void ( vNonPreemptiveTick )( void );
AT91C_BASE_AIC->AIC_SVR[portTIMER_AIC_CHANNEL] = ( uint32_t ) vNonPreemptiveTick;
}
#endif
/* Tick timer interrupt level-sensitive, priority 6... */
AT91C_BASE_AIC->AIC_SMR[ portTIMER_AIC_CHANNEL ] = AIC_SRCTYPE_INT_LEVEL_SENSITIVE | portTICK_PRIORITY_6;
/* Tick timer interrupt level-sensitive, priority 6... */
AT91C_BASE_AIC->AIC_SMR[ portTIMER_AIC_CHANNEL ] = AIC_SRCTYPE_INT_LEVEL_SENSITIVE | portTICK_PRIORITY_6;
/* Enable the tick timer interrupt...
*
* First at timer level */
portTIMER_REG_BASE_PTR->TC_IER = TC_CPCS;
/* Enable the tick timer interrupt...
/* Then at the AIC level. */
AT91C_BASE_AIC->AIC_IECR = ( 1 << portTIMER_AIC_CHANNEL );
First at timer level */
portTIMER_REG_BASE_PTR->TC_IER = TC_CPCS;
/* Calculate timer compare value to achieve the desired tick rate... */
if( ( configCPU_CLOCK_HZ / ( configTICK_RATE_HZ * 2 ) ) <= 0xFFFF )
{
/* The tick rate is fast enough for us to use the faster timer input
* clock (main clock / 2). */
portTIMER_REG_BASE_PTR->TC_CMR = TC_WAVE | TC_CLKS_MCK2 | TC_BURST_NONE | TC_CPCTRG;
portTIMER_REG_BASE_PTR->TC_RC = configCPU_CLOCK_HZ / ( configTICK_RATE_HZ * 2 );
}
else
{
/* We must use a slower timer input clock (main clock / 8) because the
* tick rate is too slow for the faster input clock. */
portTIMER_REG_BASE_PTR->TC_CMR = TC_WAVE | TC_CLKS_MCK8 | TC_BURST_NONE | TC_CPCTRG;
portTIMER_REG_BASE_PTR->TC_RC = configCPU_CLOCK_HZ / ( configTICK_RATE_HZ * 8 );
}
/* Then at the AIC level. */
AT91C_BASE_AIC->AIC_IECR = (1 << portTIMER_AIC_CHANNEL);
/* Start tick timer... */
portTIMER_REG_BASE_PTR->TC_CCR = TC_SWTRG | TC_CLKEN;
/* Calculate timer compare value to achieve the desired tick rate... */
if( (configCPU_CLOCK_HZ / (configTICK_RATE_HZ * 2) ) <= 0xFFFF )
{
/* The tick rate is fast enough for us to use the faster timer input
clock (main clock / 2). */
portTIMER_REG_BASE_PTR->TC_CMR = TC_WAVE | TC_CLKS_MCK2 | TC_BURST_NONE | TC_CPCTRG;
portTIMER_REG_BASE_PTR->TC_RC = configCPU_CLOCK_HZ / (configTICK_RATE_HZ * 2);
}
else
{
/* We must use a slower timer input clock (main clock / 8) because the
tick rate is too slow for the faster input clock. */
portTIMER_REG_BASE_PTR->TC_CMR = TC_WAVE | TC_CLKS_MCK8 | TC_BURST_NONE | TC_CPCTRG;
portTIMER_REG_BASE_PTR->TC_RC = configCPU_CLOCK_HZ / (configTICK_RATE_HZ * 8);
}
/* Start tick timer... */
portTIMER_REG_BASE_PTR->TC_CCR = TC_SWTRG | TC_CLKEN;
}
/*-----------------------------------------------------------*/

239
portable/GCC/ARM7_AT91FR40008/portISR.c
View file

@ -27,17 +27,17 @@
/*-----------------------------------------------------------
* Components that can be compiled to either ARM or THUMB mode are
* contained in port.c The ISR routines, which can only be compiled
* to ARM mode, are contained in this file.
*----------------------------------------------------------*/
* Components that can be compiled to either ARM or THUMB mode are
* contained in port.c The ISR routines, which can only be compiled
* to ARM mode, are contained in this file.
*----------------------------------------------------------*/
/*
* Changes from V3.2.4
*
+ The assembler statements are now included in a single asm block rather
+ than each line having its own asm block.
*/
Changes from V3.2.4
+ The assembler statements are now included in a single asm block rather
than each line having its own asm block.
*/
/* Scheduler includes. */
@ -45,18 +45,18 @@
#include "task.h"
/* Constants required to handle interrupts. */
#define portCLEAR_AIC_INTERRUPT ( ( uint32_t ) 0 )
#define portCLEAR_AIC_INTERRUPT ( ( uint32_t ) 0 )
/* Constants required to handle critical sections. */
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
volatile uint32_t ulCriticalNesting = 9999UL;
/*-----------------------------------------------------------*/
/* ISR to handle manual context switches (from a call to taskYIELD()). */
void vPortYieldProcessor( void ) __attribute__( ( interrupt( "SWI" ), naked ) );
void vPortYieldProcessor( void ) __attribute__((interrupt("SWI"), naked));
/*
/*
* The scheduler can only be started from ARM mode, hence the inclusion of this
* function here.
*/
@ -65,93 +65,93 @@ void vPortISRStartFirstTask( void );
void vPortISRStartFirstTask( void )
{
/* Simply start the scheduler. This is included here as it can only be
* called from ARM mode. */
portRESTORE_CONTEXT();
/* Simply start the scheduler. This is included here as it can only be
called from ARM mode. */
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
/*
* Called by portYIELD() or taskYIELD() to manually force a context switch.
*
* When a context switch is performed from the task level the saved task
* When a context switch is performed from the task level the saved task
* context is made to look as if it occurred from within the tick ISR. This
* way the same restore context function can be used when restoring the context
* saved from the ISR or that saved from a call to vPortYieldProcessor.
*/
void vPortYieldProcessor( void )
{
/* Within an IRQ ISR the link register has an offset from the true return
* address, but an SWI ISR does not. Add the offset manually so the same
* ISR return code can be used in both cases. */
asm volatile ( "ADD LR, LR, #4");
/* Within an IRQ ISR the link register has an offset from the true return
address, but an SWI ISR does not. Add the offset manually so the same
ISR return code can be used in both cases. */
asm volatile ( "ADD LR, LR, #4" );
/* Perform the context switch. First save the context of the current task. */
portSAVE_CONTEXT();
/* Perform the context switch. First save the context of the current task. */
portSAVE_CONTEXT();
/* Find the highest priority task that is ready to run. */
vTaskSwitchContext();
/* Find the highest priority task that is ready to run. */
vTaskSwitchContext();
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
/*
/*
* The ISR used for the scheduler tick depends on whether the cooperative or
* the preemptive scheduler is being used.
*/
#if configUSE_PREEMPTION == 0
/* The cooperative scheduler requires a normal IRQ service routine to
* simply increment the system tick. */
void vNonPreemptiveTick( void ) __attribute__( ( interrupt( "IRQ" ) ) );
void vNonPreemptiveTick( void )
{
static volatile uint32_t ulDummy;
/* The cooperative scheduler requires a normal IRQ service routine to
simply increment the system tick. */
void vNonPreemptiveTick( void ) __attribute__ ((interrupt ("IRQ")));
void vNonPreemptiveTick( void )
{
static volatile uint32_t ulDummy;
/* Clear tick timer interrupt indication. */
ulDummy = portTIMER_REG_BASE_PTR->TC_SR;
/* Clear tick timer interrupt indication. */
ulDummy = portTIMER_REG_BASE_PTR->TC_SR;
xTaskIncrementTick();
xTaskIncrementTick();
/* Acknowledge the interrupt at AIC level... */
AT91C_BASE_AIC->AIC_EOICR = portCLEAR_AIC_INTERRUPT;
}
/* Acknowledge the interrupt at AIC level... */
AT91C_BASE_AIC->AIC_EOICR = portCLEAR_AIC_INTERRUPT;
}
#else /* else preemption is turned on */
#else /* else preemption is turned on */
/* The preemptive scheduler is defined as "naked" as the full context is
* saved on entry as part of the context switch. */
void vPreemptiveTick( void ) __attribute__( ( naked ) );
void vPreemptiveTick( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT();
/* The preemptive scheduler is defined as "naked" as the full context is
saved on entry as part of the context switch. */
void vPreemptiveTick( void ) __attribute__((naked));
void vPreemptiveTick( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT();
/* WARNING - Do not use local (stack) variables here. Use globals
* if you must! */
static volatile uint32_t ulDummy;
/* WARNING - Do not use local (stack) variables here. Use globals
if you must! */
static volatile uint32_t ulDummy;
/* Clear tick timer interrupt indication. */
ulDummy = portTIMER_REG_BASE_PTR->TC_SR;
/* Clear tick timer interrupt indication. */
ulDummy = portTIMER_REG_BASE_PTR->TC_SR;
/* Increment the RTOS tick count, then look for the highest priority
* task that is ready to run. */
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
/* Increment the RTOS tick count, then look for the highest priority
task that is ready to run. */
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
/* Acknowledge the interrupt at AIC level... */
AT91C_BASE_AIC->AIC_EOICR = portCLEAR_AIC_INTERRUPT;
/* Acknowledge the interrupt at AIC level... */
AT91C_BASE_AIC->AIC_EOICR = portCLEAR_AIC_INTERRUPT;
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
#endif /* if configUSE_PREEMPTION == 0 */
#endif
/*-----------------------------------------------------------*/
/*
@ -162,71 +162,72 @@ void vPortYieldProcessor( void )
*/
#ifdef THUMB_INTERWORK
void vPortDisableInterruptsFromThumb( void ) __attribute__( ( naked ) );
void vPortEnableInterruptsFromThumb( void ) __attribute__( ( naked ) );
void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));
void vPortDisableInterruptsFromThumb( void )
{
asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0} \n\t"/* Pop R0. */
"BX R14"); /* Return back to thumb. */
}
void vPortEnableInterruptsFromThumb( void )
{
asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0} \n\t"/* Pop R0. */
"BX R14"); /* Return back to thumb. */
}
void vPortDisableInterruptsFromThumb( void )
{
asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0} \n\t" /* Pop R0. */
"BX R14" ); /* Return back to thumb. */
}
void vPortEnableInterruptsFromThumb( void )
{
asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0} \n\t" /* Pop R0. */
"BX R14" ); /* Return back to thumb. */
}
#endif /* THUMB_INTERWORK */
/* The code generated by the GCC compiler uses the stack in different ways at
* different optimisation levels. The interrupt flags can therefore not always
* be saved to the stack. Instead the critical section nesting level is stored
* in a variable, which is then saved as part of the stack context. */
different optimisation levels. The interrupt flags can therefore not always
be saved to the stack. Instead the critical section nesting level is stored
in a variable, which is then saved as part of the stack context. */
void vPortEnterCritical( void )
{
/* Disable interrupts as per portDISABLE_INTERRUPTS(); */
asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0}"); /* Pop R0. */
/* Disable interrupts as per portDISABLE_INTERRUPTS(); */
asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0}" ); /* Pop R0. */
/* Now interrupts are disabled ulCriticalNesting can be accessed
* directly. Increment ulCriticalNesting to keep a count of how many times
* portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* Now interrupts are disabled ulCriticalNesting can be accessed
directly. Increment ulCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
}
void vPortExitCritical( void )
{
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as we are leaving a critical section. */
ulCriticalNesting--;
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as we are leaving a critical section. */
ulCriticalNesting--;
/* If the nesting level has reached zero then interrupts should be
* re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable interrupts as per portEXIT_CRITICAL(). */
asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0}"); /* Pop R0. */
}
}
/* If the nesting level has reached zero then interrupts should be
re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable interrupts as per portEXIT_CRITICAL(). */
asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0}" ); /* Pop R0. */
}
}
}

323
portable/GCC/ARM7_AT91FR40008/portmacro.h
View file

@ -26,34 +26,34 @@
*/
/*
* Changes from V3.2.3
*
+ Modified portENTER_SWITCHING_ISR() to allow use with GCC V4.0.1.
+
+ Changes from V3.2.4
+
+ Removed the use of the %0 parameter within the assembler macros and
+ replaced them with hard coded registers. This will ensure the
+ assembler does not select the link register as the temp register as
+ was occasionally happening previously.
+
+ The assembler statements are now included in a single asm block rather
+ than each line having its own asm block.
+
+ Changes from V4.5.0
+
+ Removed the portENTER_SWITCHING_ISR() and portEXIT_SWITCHING_ISR() macros
+ and replaced them with portYIELD_FROM_ISR() macro. Application code
+ should now make use of the portSAVE_CONTEXT() and portRESTORE_CONTEXT()
+ macros as per the V4.5.1 demo code.
*/
Changes from V3.2.3
+ Modified portENTER_SWITCHING_ISR() to allow use with GCC V4.0.1.
Changes from V3.2.4
+ Removed the use of the %0 parameter within the assembler macros and
replaced them with hard coded registers. This will ensure the
assembler does not select the link register as the temp register as
was occasionally happening previously.
+ The assembler statements are now included in a single asm block rather
than each line having its own asm block.
Changes from V4.5.0
+ Removed the portENTER_SWITCHING_ISR() and portEXIT_SWITCHING_ISR() macros
and replaced them with portYIELD_FROM_ISR() macro. Application code
should now make use of the portSAVE_CONTEXT() and portRESTORE_CONTEXT()
macros as per the V4.5.1 demo code.
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -66,42 +66,42 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portYIELD() asm volatile ( "SWI 0" )
#define portNOP() asm volatile ( "NOP" )
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portYIELD() asm volatile ( "SWI 0" )
#define portNOP() asm volatile ( "NOP" )
/*
* These define the timer to use for generating the tick interrupt.
* They are put in this file so they can be shared between "port.c"
* and "portisr.c".
*/
#define portTIMER_REG_BASE_PTR AT91C_BASE_TC0
#define portTIMER_CLK_ENABLE_BIT AT91C_PS_TC0
#define portTIMER_AIC_CHANNEL ( ( uint32_t ) 4 )
#define portTIMER_REG_BASE_PTR AT91C_BASE_TC0
#define portTIMER_CLK_ENABLE_BIT AT91C_PS_TC0
#define portTIMER_AIC_CHANNEL ( ( uint32_t ) 4 )
/*-----------------------------------------------------------*/
/* Task utilities. */
@ -113,90 +113,90 @@
* THUMB mode code will result in a compile time error.
*/
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Set the LR to the task stack. */ \
asm volatile ( \
"LDR R0, =pxCurrentTCB \n\t"\
"LDR R0, [R0] \n\t"\
"LDR LR, [R0] \n\t"\
\
/* The critical nesting depth is the first item on the stack. */ \
/* Load it into the ulCriticalNesting variable. */ \
"LDR R0, =ulCriticalNesting \n\t"\
"LDMFD LR!, {R1} \n\t"\
"STR R1, [R0] \n\t"\
\
/* Get the SPSR from the stack. */ \
"LDMFD LR!, {R0} \n\t"\
"MSR SPSR, R0 \n\t"\
\
/* Restore all system mode registers for the task. */ \
"LDMFD LR, {R0-R14}^ \n\t"\
"NOP \n\t"\
\
/* Restore the return address. */ \
"LDR LR, [LR, #+60] \n\t"\
\
/* And return - correcting the offset in the LR to obtain the */ \
/* correct address. */ \
"SUBS PC, LR, #4 \n\t"\
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Set the LR to the task stack. */ \
asm volatile ( \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"LDR LR, [R0] \n\t" \
\
/* The critical nesting depth is the first item on the stack. */ \
/* Load it into the ulCriticalNesting variable. */ \
"LDR R0, =ulCriticalNesting \n\t" \
"LDMFD LR!, {R1} \n\t" \
"STR R1, [R0] \n\t" \
\
/* Get the SPSR from the stack. */ \
"LDMFD LR!, {R0} \n\t" \
"MSR SPSR, R0 \n\t" \
\
/* Restore all system mode registers for the task. */ \
"LDMFD LR, {R0-R14}^ \n\t" \
"NOP \n\t" \
\
/* Restore the return address. */ \
"LDR LR, [LR, #+60] \n\t" \
\
/* And return - correcting the offset in the LR to obtain the */ \
/* correct address. */ \
"SUBS PC, LR, #4 \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
/*-----------------------------------------------------------*/
#define portSAVE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Push R0 as we are going to use the register. */ \
asm volatile ( \
"STMDB SP!, {R0} \n\t"\
\
/* Set R0 to point to the task stack pointer. */ \
"STMDB SP,{SP}^ \n\t"\
"NOP \n\t"\
"SUB SP, SP, #4 \n\t"\
"LDMIA SP!,{R0} \n\t"\
\
/* Push the return address onto the stack. */ \
"STMDB R0!, {LR} \n\t"\
\
/* Now we have saved LR we can use it instead of R0. */ \
"MOV LR, R0 \n\t"\
\
/* Pop R0 so we can save it onto the system mode stack. */ \
"LDMIA SP!, {R0} \n\t"\
\
/* Push all the system mode registers onto the task stack. */ \
"STMDB LR,{R0-LR}^ \n\t"\
"NOP \n\t"\
"SUB LR, LR, #60 \n\t"\
\
/* Push the SPSR onto the task stack. */ \
"MRS R0, SPSR \n\t"\
"STMDB LR!, {R0} \n\t"\
\
"LDR R0, =ulCriticalNesting \n\t"\
"LDR R0, [R0] \n\t"\
"STMDB LR!, {R0} \n\t"\
\
/* Store the new top of stack for the task. */ \
"LDR R0, =pxCurrentTCB \n\t"\
"LDR R0, [R0] \n\t"\
"STR LR, [R0] \n\t"\
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portSAVE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Push R0 as we are going to use the register. */ \
asm volatile ( \
"STMDB SP!, {R0} \n\t" \
\
/* Set R0 to point to the task stack pointer. */ \
"STMDB SP,{SP}^ \n\t" \
"NOP \n\t" \
"SUB SP, SP, #4 \n\t" \
"LDMIA SP!,{R0} \n\t" \
\
/* Push the return address onto the stack. */ \
"STMDB R0!, {LR} \n\t" \
\
/* Now we have saved LR we can use it instead of R0. */ \
"MOV LR, R0 \n\t" \
\
/* Pop R0 so we can save it onto the system mode stack. */ \
"LDMIA SP!, {R0} \n\t" \
\
/* Push all the system mode registers onto the task stack. */ \
"STMDB LR,{R0-LR}^ \n\t" \
"NOP \n\t" \
"SUB LR, LR, #60 \n\t" \
\
/* Push the SPSR onto the task stack. */ \
"MRS R0, SPSR \n\t" \
"STMDB LR!, {R0} \n\t" \
\
"LDR R0, =ulCriticalNesting \n\t" \
"LDR R0, [R0] \n\t" \
"STMDB LR!, {R0} \n\t" \
\
/* Store the new top of stack for the task. */ \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"STR LR, [R0] \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portYIELD_FROM_ISR() vTaskSwitchContext()
#define portYIELD_FROM_ISR() vTaskSwitchContext()
/* Critical section handling. */
@ -207,48 +207,49 @@
* defined then the utilities are defined as macros here - as per other ports.
*/
#ifdef THUMB_INTERWORK
#ifdef THUMB_INTERWORK
extern void vPortDisableInterruptsFromThumb( void ) __attribute__( ( naked ) );
extern void vPortEnableInterruptsFromThumb( void ) __attribute__( ( naked ) );
extern void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
extern void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));
#define portDISABLE_INTERRUPTS() vPortDisableInterruptsFromThumb()
#define portENABLE_INTERRUPTS() vPortEnableInterruptsFromThumb()
#define portDISABLE_INTERRUPTS() vPortDisableInterruptsFromThumb()
#define portENABLE_INTERRUPTS() vPortEnableInterruptsFromThumb()
#else
#else
#define portDISABLE_INTERRUPTS() \
asm volatile ( \
"STMDB SP!, {R0} \n\t"/* Push R0. */\
"MRS R0, CPSR \n\t"/* Get CPSR. */\
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */\
"MSR CPSR, R0 \n\t"/* Write back modified value. */\
"LDMIA SP!, {R0} ") /* Pop R0. */
#define portDISABLE_INTERRUPTS() \
asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#define portENABLE_INTERRUPTS() \
asm volatile ( \
"STMDB SP!, {R0} \n\t"/* Push R0. */\
"MRS R0, CPSR \n\t"/* Get CPSR. */\
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */\
"MSR CPSR, R0 \n\t"/* Write back modified value. */\
"LDMIA SP!, {R0} ") /* Pop R0. */
#define portENABLE_INTERRUPTS() \
asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#endif /* THUMB_INTERWORK */
#endif /* THUMB_INTERWORK */
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

5354
portable/GCC/ARM7_AT91SAM7S/AT91SAM7X256.h
View file

File diff suppressed because it is too large Load diff

10967
portable/GCC/ARM7_AT91SAM7S/ioat91sam7x256.h
View file

File diff suppressed because it is too large Load diff

91
portable/GCC/ARM7_AT91SAM7S/lib_AT91SAM7X256.c
View file

@ -1,50 +1,51 @@
/** ---------------------------------------------------------------------------- */
/** ATMEL Microcontroller Software Support - ROUSSET - */
/** ---------------------------------------------------------------------------- */
/** DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
/** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
/** DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
/** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
/** OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
/** LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
/** NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/** EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/** ---------------------------------------------------------------------------- */
/** File Name : lib_AT91SAM7X256.h */
/** Object : AT91SAM7X256 inlined functions */
/** Generated : AT91 SW Application Group 05/20/2005 (16:22:29) */
/** */
/** CVS Reference : /lib_dbgu.h/1.1/Fri Jan 31 12:18:40 2003// */
/** CVS Reference : /lib_pmc_SAM7X.h/1.1/Tue Feb 1 08:32:10 2005// */
/** CVS Reference : /lib_VREG_6085B.h/1.1/Tue Feb 1 16:20:47 2005// */
/** CVS Reference : /lib_rstc_6098A.h/1.1/Wed Oct 6 10:39:20 2004// */
/** CVS Reference : /lib_ssc.h/1.4/Fri Jan 31 12:19:20 2003// */
/** CVS Reference : /lib_wdtc_6080A.h/1.1/Wed Oct 6 10:38:30 2004// */
/** CVS Reference : /lib_usart.h/1.5/Thu Nov 21 16:01:54 2002// */
/** CVS Reference : /lib_spi2.h/1.1/Mon Aug 25 14:23:52 2003// */
/** CVS Reference : /lib_pitc_6079A.h/1.2/Tue Nov 9 14:43:56 2004// */
/** CVS Reference : /lib_aic_6075b.h/1.1/Fri May 20 14:01:19 2005// */
/** CVS Reference : /lib_aes_6149a.h/1.1/Mon Jan 17 07:43:09 2005// */
/** CVS Reference : /lib_twi.h/1.3/Mon Jul 19 14:27:58 2004// */
/** CVS Reference : /lib_adc.h/1.6/Fri Oct 17 09:12:38 2003// */
/** CVS Reference : /lib_rttc_6081A.h/1.1/Wed Oct 6 10:39:38 2004// */
/** CVS Reference : /lib_udp.h/1.4/Wed Feb 16 08:39:34 2005// */
/** CVS Reference : /lib_des3_6150a.h/1.1/Mon Jan 17 09:19:19 2005// */
/** CVS Reference : /lib_tc_1753b.h/1.1/Fri Jan 31 12:20:02 2003// */
/** CVS Reference : /lib_MC_SAM7X.h/1.1/Thu Mar 25 15:19:14 2004// */
/** CVS Reference : /lib_pio.h/1.3/Fri Jan 31 12:18:56 2003// */
/** CVS Reference : /lib_can_AT91.h/1.4/Fri Oct 17 09:12:50 2003// */
/** CVS Reference : /lib_PWM_SAM.h/1.3/Thu Jan 22 10:10:50 2004// */
/** CVS Reference : /lib_pdc.h/1.2/Tue Jul 2 13:29:40 2002// */
/** ---------------------------------------------------------------------------- */
//* ----------------------------------------------------------------------------
//* ATMEL Microcontroller Software Support - ROUSSET -
//* ----------------------------------------------------------------------------
//* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
//* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
//* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
//* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
//* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
//* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
//* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
//* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
//* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
//* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//* ----------------------------------------------------------------------------
//* File Name : lib_AT91SAM7X256.h
//* Object : AT91SAM7X256 inlined functions
//* Generated : AT91 SW Application Group 05/20/2005 (16:22:29)
//*
//* CVS Reference : /lib_dbgu.h/1.1/Fri Jan 31 12:18:40 2003//
//* CVS Reference : /lib_pmc_SAM7X.h/1.1/Tue Feb 1 08:32:10 2005//
//* CVS Reference : /lib_VREG_6085B.h/1.1/Tue Feb 1 16:20:47 2005//
//* CVS Reference : /lib_rstc_6098A.h/1.1/Wed Oct 6 10:39:20 2004//
//* CVS Reference : /lib_ssc.h/1.4/Fri Jan 31 12:19:20 2003//
//* CVS Reference : /lib_wdtc_6080A.h/1.1/Wed Oct 6 10:38:30 2004//
//* CVS Reference : /lib_usart.h/1.5/Thu Nov 21 16:01:54 2002//
//* CVS Reference : /lib_spi2.h/1.1/Mon Aug 25 14:23:52 2003//
//* CVS Reference : /lib_pitc_6079A.h/1.2/Tue Nov 9 14:43:56 2004//
//* CVS Reference : /lib_aic_6075b.h/1.1/Fri May 20 14:01:19 2005//
//* CVS Reference : /lib_aes_6149a.h/1.1/Mon Jan 17 07:43:09 2005//
//* CVS Reference : /lib_twi.h/1.3/Mon Jul 19 14:27:58 2004//
//* CVS Reference : /lib_adc.h/1.6/Fri Oct 17 09:12:38 2003//
//* CVS Reference : /lib_rttc_6081A.h/1.1/Wed Oct 6 10:39:38 2004//
//* CVS Reference : /lib_udp.h/1.4/Wed Feb 16 08:39:34 2005//
//* CVS Reference : /lib_des3_6150a.h/1.1/Mon Jan 17 09:19:19 2005//
//* CVS Reference : /lib_tc_1753b.h/1.1/Fri Jan 31 12:20:02 2003//
//* CVS Reference : /lib_MC_SAM7X.h/1.1/Thu Mar 25 15:19:14 2004//
//* CVS Reference : /lib_pio.h/1.3/Fri Jan 31 12:18:56 2003//
//* CVS Reference : /lib_can_AT91.h/1.4/Fri Oct 17 09:12:50 2003//
//* CVS Reference : /lib_PWM_SAM.h/1.3/Thu Jan 22 10:10:50 2004//
//* CVS Reference : /lib_pdc.h/1.2/Tue Jul 2 13:29:40 2002//
//* ----------------------------------------------------------------------------
#include "AT91SAM7X256.h"
/**---------------------------------------------------------------------------- */
/** \fn AT91F_AIC_ConfigureIt */
/** \brief Interrupt Handler Initialization */
/**---------------------------------------------------------------------------- */
//*----------------------------------------------------------------------------
//* \fn AT91F_AIC_ConfigureIt
//* \brief Interrupt Handler Initialization
//*----------------------------------------------------------------------------

7516
portable/GCC/ARM7_AT91SAM7S/lib_AT91SAM7X256.h
View file

File diff suppressed because it is too large Load diff

227
portable/GCC/ARM7_AT91SAM7S/port.c
View file

@ -27,12 +27,12 @@
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the ARM7 port.
*
* Components that can be compiled to either ARM or THUMB mode are
* contained in this file. The ISR routines, which can only be compiled
* to ARM mode are contained in portISR.c.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the ARM7 port.
*
* Components that can be compiled to either ARM or THUMB mode are
* contained in this file. The ISR routines, which can only be compiled
* to ARM mode are contained in portISR.c.
*----------------------------------------------------------*/
/* Standard includes. */
#include <stdlib.h>
@ -45,139 +45,137 @@
#include "AT91SAM7X256.h"
/* Constants required to setup the task context. */
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINSTRUCTION_SIZE ( ( StackType_t ) 4 )
#define portNO_CRITICAL_SECTION_NESTING ( ( StackType_t ) 0 )
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINSTRUCTION_SIZE ( ( StackType_t ) 4 )
#define portNO_CRITICAL_SECTION_NESTING ( ( StackType_t ) 0 )
/* Constants required to setup the tick ISR. */
#define portENABLE_TIMER ( ( uint8_t ) 0x01 )
#define portPRESCALE_VALUE 0x00
#define portINTERRUPT_ON_MATCH ( ( uint32_t ) 0x01 )
#define portRESET_COUNT_ON_MATCH ( ( uint32_t ) 0x02 )
#define portENABLE_TIMER ( ( uint8_t ) 0x01 )
#define portPRESCALE_VALUE 0x00
#define portINTERRUPT_ON_MATCH ( ( uint32_t ) 0x01 )
#define portRESET_COUNT_ON_MATCH ( ( uint32_t ) 0x02 )
/* Constants required to setup the PIT. */
#define portPIT_CLOCK_DIVISOR ( ( uint32_t ) 16 )
#define portPIT_COUNTER_VALUE ( ( ( configCPU_CLOCK_HZ / portPIT_CLOCK_DIVISOR ) / 1000UL ) * portTICK_PERIOD_MS )
#define portPIT_CLOCK_DIVISOR ( ( uint32_t ) 16 )
#define portPIT_COUNTER_VALUE ( ( ( configCPU_CLOCK_HZ / portPIT_CLOCK_DIVISOR ) / 1000UL ) * portTICK_PERIOD_MS )
#define portINT_LEVEL_SENSITIVE 0
#define portPIT_ENABLE ( ( uint16_t ) 0x1 << 24 )
#define portPIT_INT_ENABLE ( ( uint16_t ) 0x1 << 25 )
#define portINT_LEVEL_SENSITIVE 0
#define portPIT_ENABLE ( ( uint16_t ) 0x1 << 24 )
#define portPIT_INT_ENABLE ( ( uint16_t ) 0x1 << 25 )
/*-----------------------------------------------------------*/
/* Setup the timer to generate the tick interrupts. */
static void prvSetupTimerInterrupt( void );
/*
* The scheduler can only be started from ARM mode, so
* vPortISRStartFirstSTask() is defined in portISR.c.
/*
* The scheduler can only be started from ARM mode, so
* vPortISRStartFirstSTask() is defined in portISR.c.
*/
extern void vPortISRStartFirstTask( void );
/*-----------------------------------------------------------*/
/*
* Initialise the stack of a task to look exactly as if a call to
/*
* Initialise the stack of a task to look exactly as if a call to
* portSAVE_CONTEXT had been called.
*
* See header file for description.
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
StackType_t * pxOriginalTOS;
StackType_t *pxOriginalTOS;
pxOriginalTOS = pxTopOfStack;
pxOriginalTOS = pxTopOfStack;
/* To ensure asserts in tasks.c don't fail, although in this case the assert
* is not really required. */
pxTopOfStack--;
/* To ensure asserts in tasks.c don't fail, although in this case the assert
is not really required. */
pxTopOfStack--;
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro. */
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro. */
/* First on the stack is the return address - which in this case is the
* start of the task. The offset is added to make the return address appear
* as it would within an IRQ ISR. */
*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;
pxTopOfStack--;
/* First on the stack is the return address - which in this case is the
start of the task. The offset is added to make the return address appear
as it would within an IRQ ISR. */
*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00000000; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00000000; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
/* When the task starts is will expect to find the function parameter in
* R0. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* When the task starts is will expect to find the function parameter in
R0. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* The last thing onto the stack is the status register, which is set for
* system mode, with interrupts enabled. */
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
/* The last thing onto the stack is the status register, which is set for
system mode, with interrupts enabled. */
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
#ifdef THUMB_INTERWORK
{
/* We want the task to start in thumb mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
#endif
#ifdef THUMB_INTERWORK
{
/* We want the task to start in thumb mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
#endif
pxTopOfStack--;
pxTopOfStack--;
/* Some optimisation levels use the stack differently to others. This
* means the interrupt flags cannot always be stored on the stack and will
* instead be stored in a variable, which is then saved as part of the
* tasks context. */
*pxTopOfStack = portNO_CRITICAL_SECTION_NESTING;
/* Some optimisation levels use the stack differently to others. This
means the interrupt flags cannot always be stored on the stack and will
instead be stored in a variable, which is then saved as part of the
tasks context. */
*pxTopOfStack = portNO_CRITICAL_SECTION_NESTING;
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* Start the timer that generates the tick ISR. Interrupts are disabled
* here already. */
prvSetupTimerInterrupt();
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Start the first task. */
vPortISRStartFirstTask();
/* Start the first task. */
vPortISRStartFirstTask();
/* Should not get here! */
return 0;
/* Should not get here! */
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the ARM port will require this function as there
* is nothing to return to. */
/* It is unlikely that the ARM port will require this function as there
is nothing to return to. */
}
/*-----------------------------------------------------------*/
@ -186,23 +184,30 @@ void vPortEndScheduler( void )
*/
static void prvSetupTimerInterrupt( void )
{
AT91PS_PITC pxPIT = AT91C_BASE_PITC;
AT91PS_PITC pxPIT = AT91C_BASE_PITC;
/* Setup the AIC for PIT interrupts. The interrupt routine chosen depends
* on whether the preemptive or cooperative scheduler is being used. */
#if configUSE_PREEMPTION == 0
extern void( vNonPreemptiveTick ) ( void );
AT91F_AIC_ConfigureIt( AT91C_ID_SYS, AT91C_AIC_PRIOR_HIGHEST, portINT_LEVEL_SENSITIVE, ( void ( * )( void ) )vNonPreemptiveTick );
#else
extern void( vPreemptiveTick )( void );
AT91F_AIC_ConfigureIt( AT91C_ID_SYS, AT91C_AIC_PRIOR_HIGHEST, portINT_LEVEL_SENSITIVE, ( void ( * )( void ) )vPreemptiveTick );
#endif
/* Setup the AIC for PIT interrupts. The interrupt routine chosen depends
on whether the preemptive or cooperative scheduler is being used. */
#if configUSE_PREEMPTION == 0
/* Configure the PIT period. */
pxPIT->PITC_PIMR = portPIT_ENABLE | portPIT_INT_ENABLE | portPIT_COUNTER_VALUE;
extern void ( vNonPreemptiveTick ) ( void );
AT91F_AIC_ConfigureIt( AT91C_ID_SYS, AT91C_AIC_PRIOR_HIGHEST, portINT_LEVEL_SENSITIVE, ( void (*)(void) ) vNonPreemptiveTick );
/* Enable the interrupt. Global interrupts are disables at this point so
* this is safe. */
#else
extern void ( vPreemptiveTick )( void );
AT91F_AIC_ConfigureIt( AT91C_ID_SYS, AT91C_AIC_PRIOR_HIGHEST, portINT_LEVEL_SENSITIVE, ( void (*)(void) ) vPreemptiveTick );
#endif
/* Configure the PIT period. */
pxPIT->PITC_PIMR = portPIT_ENABLE | portPIT_INT_ENABLE | portPIT_COUNTER_VALUE;
/* Enable the interrupt. Global interrupts are disables at this point so
this is safe. */
AT91C_BASE_AIC->AIC_IECR = 0x1 << AT91C_ID_SYS;
}
/*-----------------------------------------------------------*/

215
portable/GCC/ARM7_AT91SAM7S/portISR.c
View file

@ -27,17 +27,17 @@
/*-----------------------------------------------------------
* Components that can be compiled to either ARM or THUMB mode are
* contained in port.c The ISR routines, which can only be compiled
* to ARM mode, are contained in this file.
*----------------------------------------------------------*/
* Components that can be compiled to either ARM or THUMB mode are
* contained in port.c The ISR routines, which can only be compiled
* to ARM mode, are contained in this file.
*----------------------------------------------------------*/
/*
* Changes from V3.2.4
*
+ The assembler statements are now included in a single asm block rather
+ than each line having its own asm block.
*/
Changes from V3.2.4
+ The assembler statements are now included in a single asm block rather
than each line having its own asm block.
*/
/* Scheduler includes. */
#include "FreeRTOS.h"
@ -46,17 +46,17 @@
#include "AT91SAM7X256.h"
/* Constants required to handle interrupts. */
#define portTIMER_MATCH_ISR_BIT ( ( uint8_t ) 0x01 )
#define portCLEAR_VIC_INTERRUPT ( ( uint32_t ) 0 )
#define portTIMER_MATCH_ISR_BIT ( ( uint8_t ) 0x01 )
#define portCLEAR_VIC_INTERRUPT ( ( uint32_t ) 0 )
/* Constants required to handle critical sections. */
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
volatile uint32_t ulCriticalNesting = 9999UL;
/*-----------------------------------------------------------*/
/* ISR to handle manual context switches (from a call to taskYIELD()). */
void vPortYieldProcessor( void ) __attribute__( ( interrupt( "SWI" ), naked ) );
void vPortYieldProcessor( void ) __attribute__((interrupt("SWI"), naked));
/*
* The scheduler can only be started from ARM mode, hence the inclusion of this
@ -67,9 +67,9 @@ void vPortISRStartFirstTask( void );
void vPortISRStartFirstTask( void )
{
/* Simply start the scheduler. This is included here as it can only be
* called from ARM mode. */
portRESTORE_CONTEXT();
/* Simply start the scheduler. This is included here as it can only be
called from ARM mode. */
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
@ -83,19 +83,19 @@ void vPortISRStartFirstTask( void )
*/
void vPortYieldProcessor( void )
{
/* Within an IRQ ISR the link register has an offset from the true return
* address, but an SWI ISR does not. Add the offset manually so the same
* ISR return code can be used in both cases. */
__asm volatile ( "ADD LR, LR, #4");
/* Within an IRQ ISR the link register has an offset from the true return
address, but an SWI ISR does not. Add the offset manually so the same
ISR return code can be used in both cases. */
__asm volatile ( "ADD LR, LR, #4" );
/* Perform the context switch. First save the context of the current task. */
portSAVE_CONTEXT();
/* Perform the context switch. First save the context of the current task. */
portSAVE_CONTEXT();
/* Find the highest priority task that is ready to run. */
vTaskSwitchContext();
/* Find the highest priority task that is ready to run. */
vTaskSwitchContext();
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
@ -106,49 +106,49 @@ void vPortYieldProcessor( void )
#if configUSE_PREEMPTION == 0
/* The cooperative scheduler requires a normal IRQ service routine to
* simply increment the system tick. */
void vNonPreemptiveTick( void ) __attribute__( ( interrupt( "IRQ" ) ) );
void vNonPreemptiveTick( void )
{
uint32_t ulDummy;
/* The cooperative scheduler requires a normal IRQ service routine to
simply increment the system tick. */
void vNonPreemptiveTick( void ) __attribute__ ((interrupt ("IRQ")));
void vNonPreemptiveTick( void )
{
uint32_t ulDummy;
/* Increment the tick count - which may wake some tasks but as the
* preemptive scheduler is not being used any woken task is not given
* processor time no matter what its priority. */
xTaskIncrementTick();
/* Increment the tick count - which may wake some tasks but as the
preemptive scheduler is not being used any woken task is not given
processor time no matter what its priority. */
xTaskIncrementTick();
/* Clear the PIT interrupt. */
ulDummy = AT91C_BASE_PITC->PITC_PIVR;
/* Clear the PIT interrupt. */
ulDummy = AT91C_BASE_PITC->PITC_PIVR;
/* End the interrupt in the AIC. */
AT91C_BASE_AIC->AIC_EOICR = ulDummy;
}
/* End the interrupt in the AIC. */
AT91C_BASE_AIC->AIC_EOICR = ulDummy;
}
#else /* if configUSE_PREEMPTION == 0 */
#else
/* The preemptive scheduler is defined as "naked" as the full context is
* saved on entry as part of the context switch. */
void vPreemptiveTick( void ) __attribute__( ( naked ) );
void vPreemptiveTick( void )
{
/* Save the context of the current task. */
portSAVE_CONTEXT();
/* The preemptive scheduler is defined as "naked" as the full context is
saved on entry as part of the context switch. */
void vPreemptiveTick( void ) __attribute__((naked));
void vPreemptiveTick( void )
{
/* Save the context of the current task. */
portSAVE_CONTEXT();
/* Increment the tick count - this may wake a task. */
if( xTaskIncrementTick() != pdFALSE )
{
/* Find the highest priority task that is ready to run. */
vTaskSwitchContext();
}
/* Increment the tick count - this may wake a task. */
if( xTaskIncrementTick() != pdFALSE )
{
/* Find the highest priority task that is ready to run. */
vTaskSwitchContext();
}
/* End the interrupt in the AIC. */
AT91C_BASE_AIC->AIC_EOICR = AT91C_BASE_PITC->PITC_PIVR;
/* End the interrupt in the AIC. */
AT91C_BASE_AIC->AIC_EOICR = AT91C_BASE_PITC->PITC_PIVR;
portRESTORE_CONTEXT();
}
portRESTORE_CONTEXT();
}
#endif /* if configUSE_PREEMPTION == 0 */
#endif
/*-----------------------------------------------------------*/
/*
@ -157,70 +157,71 @@ void vPortYieldProcessor( void )
* ensure a switch to ARM mode. When THUMB_INTERWORK is not defined then
* the utilities are defined as macros in portmacro.h - as per other ports.
*/
void vPortDisableInterruptsFromThumb( void ) __attribute__( ( naked ) );
void vPortEnableInterruptsFromThumb( void ) __attribute__( ( naked ) );
void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));
void vPortDisableInterruptsFromThumb( void )
{
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0} \n\t"/* Pop R0. */
"BX R14"); /* Return back to thumb. */
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0} \n\t" /* Pop R0. */
"BX R14" ); /* Return back to thumb. */
}
void vPortEnableInterruptsFromThumb( void )
{
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0} \n\t"/* Pop R0. */
"BX R14"); /* Return back to thumb. */
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0} \n\t" /* Pop R0. */
"BX R14" ); /* Return back to thumb. */
}
/* The code generated by the GCC compiler uses the stack in different ways at
* different optimisation levels. The interrupt flags can therefore not always
* be saved to the stack. Instead the critical section nesting level is stored
* in a variable, which is then saved as part of the stack context. */
different optimisation levels. The interrupt flags can therefore not always
be saved to the stack. Instead the critical section nesting level is stored
in a variable, which is then saved as part of the stack context. */
void vPortEnterCritical( void )
{
/* Disable interrupts as per portDISABLE_INTERRUPTS(); */
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0}"); /* Pop R0. */
/* Disable interrupts as per portDISABLE_INTERRUPTS(); */
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0}" ); /* Pop R0. */
/* Now interrupts are disabled ulCriticalNesting can be accessed
* directly. Increment ulCriticalNesting to keep a count of how many times
* portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* Now interrupts are disabled ulCriticalNesting can be accessed
directly. Increment ulCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
}
void vPortExitCritical( void )
{
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as we are leaving a critical section. */
ulCriticalNesting--;
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as we are leaving a critical section. */
ulCriticalNesting--;
/* If the nesting level has reached zero then interrupts should be
* re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable interrupts as per portEXIT_CRITICAL(). */
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0}"); /* Pop R0. */
}
}
/* If the nesting level has reached zero then interrupts should be
re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable interrupts as per portEXIT_CRITICAL(). */
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0}" ); /* Pop R0. */
}
}
}

317
portable/GCC/ARM7_AT91SAM7S/portmacro.h
View file

@ -26,34 +26,34 @@
*/
/*
* Changes from V3.2.3
*
+ Modified portENTER_SWITCHING_ISR() to allow use with GCC V4.0.1.
+
+ Changes from V3.2.4
+
+ Removed the use of the %0 parameter within the assembler macros and
+ replaced them with hard coded registers. This will ensure the
+ assembler does not select the link register as the temp register as
+ was occasionally happening previously.
+
+ The assembler statements are now included in a single asm block rather
+ than each line having its own asm block.
+
+ Changes from V4.5.0
+
+ Removed the portENTER_SWITCHING_ISR() and portEXIT_SWITCHING_ISR() macros
+ and replaced them with portYIELD_FROM_ISR() macro. Application code
+ should now make use of the portSAVE_CONTEXT() and portRESTORE_CONTEXT()
+ macros as per the V4.5.1 demo code.
*/
Changes from V3.2.3
+ Modified portENTER_SWITCHING_ISR() to allow use with GCC V4.0.1.
Changes from V3.2.4
+ Removed the use of the %0 parameter within the assembler macros and
replaced them with hard coded registers. This will ensure the
assembler does not select the link register as the temp register as
was occasionally happening previously.
+ The assembler statements are now included in a single asm block rather
than each line having its own asm block.
Changes from V4.5.0
+ Removed the portENTER_SWITCHING_ISR() and portEXIT_SWITCHING_ISR() macros
and replaced them with portYIELD_FROM_ISR() macro. Application code
should now make use of the portSAVE_CONTEXT() and portRESTORE_CONTEXT()
macros as per the V4.5.1 demo code.
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -66,32 +66,32 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE portLONG
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE portLONG
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portNOP() __asm volatile ( "NOP" );
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portNOP() __asm volatile ( "NOP" );
/*-----------------------------------------------------------*/
@ -104,92 +104,92 @@
* THUMB mode code will result in a compile time error.
*/
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Set the LR to the task stack. */ \
__asm volatile ( \
"LDR R0, =pxCurrentTCB \n\t"\
"LDR R0, [R0] \n\t"\
"LDR LR, [R0] \n\t"\
\
/* The critical nesting depth is the first item on the stack. */ \
/* Load it into the ulCriticalNesting variable. */ \
"LDR R0, =ulCriticalNesting \n\t"\
"LDMFD LR!, {R1} \n\t"\
"STR R1, [R0] \n\t"\
\
/* Get the SPSR from the stack. */ \
"LDMFD LR!, {R0} \n\t"\
"MSR SPSR, R0 \n\t"\
\
/* Restore all system mode registers for the task. */ \
"LDMFD LR, {R0-R14}^ \n\t"\
"NOP \n\t"\
\
/* Restore the return address. */ \
"LDR LR, [LR, #+60] \n\t"\
\
/* And return - correcting the offset in the LR to obtain the */ \
/* correct address. */ \
"SUBS PC, LR, #4 \n\t"\
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Set the LR to the task stack. */ \
__asm volatile ( \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"LDR LR, [R0] \n\t" \
\
/* The critical nesting depth is the first item on the stack. */ \
/* Load it into the ulCriticalNesting variable. */ \
"LDR R0, =ulCriticalNesting \n\t" \
"LDMFD LR!, {R1} \n\t" \
"STR R1, [R0] \n\t" \
\
/* Get the SPSR from the stack. */ \
"LDMFD LR!, {R0} \n\t" \
"MSR SPSR, R0 \n\t" \
\
/* Restore all system mode registers for the task. */ \
"LDMFD LR, {R0-R14}^ \n\t" \
"NOP \n\t" \
\
/* Restore the return address. */ \
"LDR LR, [LR, #+60] \n\t" \
\
/* And return - correcting the offset in the LR to obtain the */ \
/* correct address. */ \
"SUBS PC, LR, #4 \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
/*-----------------------------------------------------------*/
#define portSAVE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Push R0 as we are going to use the register. */ \
__asm volatile ( \
"STMDB SP!, {R0} \n\t"\
\
/* Set R0 to point to the task stack pointer. */ \
"STMDB SP,{SP}^ \n\t"\
"NOP \n\t"\
"SUB SP, SP, #4 \n\t"\
"LDMIA SP!,{R0} \n\t"\
\
/* Push the return address onto the stack. */ \
"STMDB R0!, {LR} \n\t"\
\
/* Now we have saved LR we can use it instead of R0. */ \
"MOV LR, R0 \n\t"\
\
/* Pop R0 so we can save it onto the system mode stack. */ \
"LDMIA SP!, {R0} \n\t"\
\
/* Push all the system mode registers onto the task stack. */ \
"STMDB LR,{R0-LR}^ \n\t"\
"NOP \n\t"\
"SUB LR, LR, #60 \n\t"\
\
/* Push the SPSR onto the task stack. */ \
"MRS R0, SPSR \n\t"\
"STMDB LR!, {R0} \n\t"\
\
"LDR R0, =ulCriticalNesting \n\t"\
"LDR R0, [R0] \n\t"\
"STMDB LR!, {R0} \n\t"\
\
/* Store the new top of stack for the task. */ \
"LDR R0, =pxCurrentTCB \n\t"\
"LDR R0, [R0] \n\t"\
"STR LR, [R0] \n\t"\
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portSAVE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Push R0 as we are going to use the register. */ \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" \
\
/* Set R0 to point to the task stack pointer. */ \
"STMDB SP,{SP}^ \n\t" \
"NOP \n\t" \
"SUB SP, SP, #4 \n\t" \
"LDMIA SP!,{R0} \n\t" \
\
/* Push the return address onto the stack. */ \
"STMDB R0!, {LR} \n\t" \
\
/* Now we have saved LR we can use it instead of R0. */ \
"MOV LR, R0 \n\t" \
\
/* Pop R0 so we can save it onto the system mode stack. */ \
"LDMIA SP!, {R0} \n\t" \
\
/* Push all the system mode registers onto the task stack. */ \
"STMDB LR,{R0-LR}^ \n\t" \
"NOP \n\t" \
"SUB LR, LR, #60 \n\t" \
\
/* Push the SPSR onto the task stack. */ \
"MRS R0, SPSR \n\t" \
"STMDB LR!, {R0} \n\t" \
\
"LDR R0, =ulCriticalNesting \n\t" \
"LDR R0, [R0] \n\t" \
"STMDB LR!, {R0} \n\t" \
\
/* Store the new top of stack for the task. */ \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"STR LR, [R0] \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portYIELD_FROM_ISR() vTaskSwitchContext()
#define portYIELD() __asm volatile ( "SWI 0" )
#define portYIELD_FROM_ISR() vTaskSwitchContext()
#define portYIELD() __asm volatile ( "SWI 0" )
/*-----------------------------------------------------------*/
@ -202,47 +202,48 @@
* defined then the utilities are defined as macros here - as per other ports.
*/
#ifdef THUMB_INTERWORK
#ifdef THUMB_INTERWORK
extern void vPortDisableInterruptsFromThumb( void ) __attribute__( ( naked ) );
extern void vPortEnableInterruptsFromThumb( void ) __attribute__( ( naked ) );
extern void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
extern void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));
#define portDISABLE_INTERRUPTS() vPortDisableInterruptsFromThumb()
#define portENABLE_INTERRUPTS() vPortEnableInterruptsFromThumb()
#define portDISABLE_INTERRUPTS() vPortDisableInterruptsFromThumb()
#define portENABLE_INTERRUPTS() vPortEnableInterruptsFromThumb()
#else
#else
#define portDISABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t"/* Push R0. */\
"MRS R0, CPSR \n\t"/* Get CPSR. */\
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */\
"MSR CPSR, R0 \n\t"/* Write back modified value. */\
"LDMIA SP!, {R0} ") /* Pop R0. */
#define portDISABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#define portENABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t"/* Push R0. */\
"MRS R0, CPSR \n\t"/* Get CPSR. */\
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */\
"MSR CPSR, R0 \n\t"/* Write back modified value. */\
"LDMIA SP!, {R0} ") /* Pop R0. */
#define portENABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#endif /* THUMB_INTERWORK */
#endif /* THUMB_INTERWORK */
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

246
portable/GCC/ARM7_LPC2000/port.c
View file

@ -27,12 +27,12 @@
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the ARM7 port.
*
* Components that can be compiled to either ARM or THUMB mode are
* contained in this file. The ISR routines, which can only be compiled
* to ARM mode are contained in portISR.c.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the ARM7 port.
*
* Components that can be compiled to either ARM or THUMB mode are
* contained in this file. The ISR routines, which can only be compiled
* to ARM mode are contained in portISR.c.
*----------------------------------------------------------*/
/* Standard includes. */
@ -43,136 +43,134 @@
#include "task.h"
/* Constants required to setup the task context. */
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINSTRUCTION_SIZE ( ( StackType_t ) 4 )
#define portNO_CRITICAL_SECTION_NESTING ( ( StackType_t ) 0 )
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINSTRUCTION_SIZE ( ( StackType_t ) 4 )
#define portNO_CRITICAL_SECTION_NESTING ( ( StackType_t ) 0 )
/* Constants required to setup the tick ISR. */
#define portENABLE_TIMER ( ( uint8_t ) 0x01 )
#define portPRESCALE_VALUE 0x00
#define portINTERRUPT_ON_MATCH ( ( uint32_t ) 0x01 )
#define portRESET_COUNT_ON_MATCH ( ( uint32_t ) 0x02 )
#define portENABLE_TIMER ( ( uint8_t ) 0x01 )
#define portPRESCALE_VALUE 0x00
#define portINTERRUPT_ON_MATCH ( ( uint32_t ) 0x01 )
#define portRESET_COUNT_ON_MATCH ( ( uint32_t ) 0x02 )
/* Constants required to setup the VIC for the tick ISR. */
#define portTIMER_VIC_CHANNEL ( ( uint32_t ) 0x0004 )
#define portTIMER_VIC_CHANNEL_BIT ( ( uint32_t ) 0x0010 )
#define portTIMER_VIC_ENABLE ( ( uint32_t ) 0x0020 )
#define portTIMER_VIC_CHANNEL ( ( uint32_t ) 0x0004 )
#define portTIMER_VIC_CHANNEL_BIT ( ( uint32_t ) 0x0010 )
#define portTIMER_VIC_ENABLE ( ( uint32_t ) 0x0020 )
/*-----------------------------------------------------------*/
/* Setup the timer to generate the tick interrupts. */
static void prvSetupTimerInterrupt( void );
/*
* The scheduler can only be started from ARM mode, so
* vPortISRStartFirstSTask() is defined in portISR.c.
/*
* The scheduler can only be started from ARM mode, so
* vPortISRStartFirstSTask() is defined in portISR.c.
*/
extern void vPortISRStartFirstTask( void );
/*-----------------------------------------------------------*/
/*
* Initialise the stack of a task to look exactly as if a call to
/*
* Initialise the stack of a task to look exactly as if a call to
* portSAVE_CONTEXT had been called.
*
* See header file for description.
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
StackType_t * pxOriginalTOS;
StackType_t *pxOriginalTOS;
pxOriginalTOS = pxTopOfStack;
pxOriginalTOS = pxTopOfStack;
/* To ensure asserts in tasks.c don't fail, although in this case the assert
* is not really required. */
pxTopOfStack--;
/* To ensure asserts in tasks.c don't fail, although in this case the assert
is not really required. */
pxTopOfStack--;
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro. */
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro. */
/* First on the stack is the return address - which in this case is the
* start of the task. The offset is added to make the return address appear
* as it would within an IRQ ISR. */
*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;
pxTopOfStack--;
/* First on the stack is the return address - which in this case is the
start of the task. The offset is added to make the return address appear
as it would within an IRQ ISR. */
*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xaaaaaaaa; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xaaaaaaaa; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
/* When the task starts is will expect to find the function parameter in
* R0. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* When the task starts is will expect to find the function parameter in
R0. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* The last thing onto the stack is the status register, which is set for
* system mode, with interrupts enabled. */
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
/* The last thing onto the stack is the status register, which is set for
system mode, with interrupts enabled. */
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
if( ( ( uint32_t ) pxCode & 0x01UL ) != 0x00 )
{
/* We want the task to start in thumb mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
if( ( ( uint32_t ) pxCode & 0x01UL ) != 0x00 )
{
/* We want the task to start in thumb mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
pxTopOfStack--;
pxTopOfStack--;
/* Some optimisation levels use the stack differently to others. This
* means the interrupt flags cannot always be stored on the stack and will
* instead be stored in a variable, which is then saved as part of the
* tasks context. */
*pxTopOfStack = portNO_CRITICAL_SECTION_NESTING;
/* Some optimisation levels use the stack differently to others. This
means the interrupt flags cannot always be stored on the stack and will
instead be stored in a variable, which is then saved as part of the
tasks context. */
*pxTopOfStack = portNO_CRITICAL_SECTION_NESTING;
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* Start the timer that generates the tick ISR. Interrupts are disabled
* here already. */
prvSetupTimerInterrupt();
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Start the first task. */
vPortISRStartFirstTask();
/* Start the first task. */
vPortISRStartFirstTask();
/* Should not get here! */
return 0;
/* Should not get here! */
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the ARM port will require this function as there
* is nothing to return to. */
/* It is unlikely that the ARM port will require this function as there
is nothing to return to. */
}
/*-----------------------------------------------------------*/
@ -181,41 +179,43 @@ void vPortEndScheduler( void )
*/
static void prvSetupTimerInterrupt( void )
{
uint32_t ulCompareMatch;
uint32_t ulCompareMatch;
extern void ( vTickISR )( void );
extern void( vTickISR )( void );
/* A 1ms tick does not require the use of the timer prescale. This is
defaulted to zero but can be used if necessary. */
T0_PR = portPRESCALE_VALUE;
/* A 1ms tick does not require the use of the timer prescale. This is
* defaulted to zero but can be used if necessary. */
T0_PR = portPRESCALE_VALUE;
/* Calculate the match value required for our wanted tick rate. */
ulCompareMatch = configCPU_CLOCK_HZ / configTICK_RATE_HZ;
/* Calculate the match value required for our wanted tick rate. */
ulCompareMatch = configCPU_CLOCK_HZ / configTICK_RATE_HZ;
/* Protect against divide by zero. Using an if() statement still results
in a warning - hence the #if. */
#if portPRESCALE_VALUE != 0
{
ulCompareMatch /= ( portPRESCALE_VALUE + 1 );
}
#endif
T0_MR0 = ulCompareMatch;
/* Protect against divide by zero. Using an if() statement still results
* in a warning - hence the #if. */
#if portPRESCALE_VALUE != 0
{
ulCompareMatch /= ( portPRESCALE_VALUE + 1 );
}
#endif
T0_MR0 = ulCompareMatch;
/* Generate tick with timer 0 compare match. */
T0_MCR = portRESET_COUNT_ON_MATCH | portINTERRUPT_ON_MATCH;
/* Generate tick with timer 0 compare match. */
T0_MCR = portRESET_COUNT_ON_MATCH | portINTERRUPT_ON_MATCH;
/* Setup the VIC for the timer. */
VICIntSelect &= ~( portTIMER_VIC_CHANNEL_BIT );
VICIntEnable |= portTIMER_VIC_CHANNEL_BIT;
/* The ISR installed depends on whether the preemptive or cooperative
scheduler is being used. */
/* Setup the VIC for the timer. */
VICIntSelect &= ~( portTIMER_VIC_CHANNEL_BIT );
VICIntEnable |= portTIMER_VIC_CHANNEL_BIT;
VICVectAddr0 = ( int32_t ) vTickISR;
VICVectCntl0 = portTIMER_VIC_CHANNEL | portTIMER_VIC_ENABLE;
/* The ISR installed depends on whether the preemptive or cooperative
* scheduler is being used. */
VICVectAddr0 = ( int32_t ) vTickISR;
VICVectCntl0 = portTIMER_VIC_CHANNEL | portTIMER_VIC_ENABLE;
/* Start the timer - interrupts are disabled when this function is called
* so it is okay to do this here. */
T0_TCR = portENABLE_TIMER;
/* Start the timer - interrupts are disabled when this function is called
so it is okay to do this here. */
T0_TCR = portENABLE_TIMER;
}
/*-----------------------------------------------------------*/

216
portable/GCC/ARM7_LPC2000/portISR.c
View file

@ -27,45 +27,45 @@
/*-----------------------------------------------------------
* Components that can be compiled to either ARM or THUMB mode are
* contained in port.c The ISR routines, which can only be compiled
* to ARM mode, are contained in this file.
*----------------------------------------------------------*/
* Components that can be compiled to either ARM or THUMB mode are
* contained in port.c The ISR routines, which can only be compiled
* to ARM mode, are contained in this file.
*----------------------------------------------------------*/
/*
* Changes from V2.5.2
*
+ The critical section management functions have been changed. These no
+ longer modify the stack and are safe to use at all optimisation levels.
+ The functions are now also the same for both ARM and THUMB modes.
+
+ Changes from V2.6.0
+
+ Removed the 'static' from the definition of vNonPreemptiveTick() to
+ allow the demo to link when using the cooperative scheduler.
+
+ Changes from V3.2.4
+
+ The assembler statements are now included in a single asm block rather
+ than each line having its own asm block.
*/
Changes from V2.5.2
+ The critical section management functions have been changed. These no
longer modify the stack and are safe to use at all optimisation levels.
The functions are now also the same for both ARM and THUMB modes.
Changes from V2.6.0
+ Removed the 'static' from the definition of vNonPreemptiveTick() to
allow the demo to link when using the cooperative scheduler.
Changes from V3.2.4
+ The assembler statements are now included in a single asm block rather
than each line having its own asm block.
*/
/* Scheduler includes. */
#include "FreeRTOS.h"
/* Constants required to handle interrupts. */
#define portTIMER_MATCH_ISR_BIT ( ( uint8_t ) 0x01 )
#define portCLEAR_VIC_INTERRUPT ( ( uint32_t ) 0 )
#define portTIMER_MATCH_ISR_BIT ( ( uint8_t ) 0x01 )
#define portCLEAR_VIC_INTERRUPT ( ( uint32_t ) 0 )
/* Constants required to handle critical sections. */
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
volatile uint32_t ulCriticalNesting = 9999UL;
/*-----------------------------------------------------------*/
/* ISR to handle manual context switches (from a call to taskYIELD()). */
void vPortYieldProcessor( void ) __attribute__( ( interrupt( "SWI" ), naked ) );
void vPortYieldProcessor( void ) __attribute__((interrupt("SWI"), naked));
/*
* The scheduler can only be started from ARM mode, hence the inclusion of this
@ -76,9 +76,9 @@ void vPortISRStartFirstTask( void );
void vPortISRStartFirstTask( void )
{
/* Simply start the scheduler. This is included here as it can only be
* called from ARM mode. */
portRESTORE_CONTEXT();
/* Simply start the scheduler. This is included here as it can only be
called from ARM mode. */
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
@ -92,48 +92,48 @@ void vPortISRStartFirstTask( void )
*/
void vPortYieldProcessor( void )
{
/* Within an IRQ ISR the link register has an offset from the true return
* address, but an SWI ISR does not. Add the offset manually so the same
* ISR return code can be used in both cases. */
__asm volatile ( "ADD LR, LR, #4");
/* Within an IRQ ISR the link register has an offset from the true return
address, but an SWI ISR does not. Add the offset manually so the same
ISR return code can be used in both cases. */
__asm volatile ( "ADD LR, LR, #4" );
/* Perform the context switch. First save the context of the current task. */
portSAVE_CONTEXT();
/* Perform the context switch. First save the context of the current task. */
portSAVE_CONTEXT();
/* Find the highest priority task that is ready to run. */
__asm volatile ( "bl vTaskSwitchContext" );
/* Find the highest priority task that is ready to run. */
__asm volatile ( "bl vTaskSwitchContext" );
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
/*
* The ISR used for the scheduler tick.
*/
void vTickISR( void ) __attribute__( ( naked ) );
void vTickISR( void ) __attribute__((naked));
void vTickISR( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT();
/* Save the context of the interrupted task. */
portSAVE_CONTEXT();
/* Increment the RTOS tick count, then look for the highest priority
* task that is ready to run. */
__asm volatile
(
" bl xTaskIncrementTick \t\n"\
" cmp r0, #0 \t\n"\
" beq SkipContextSwitch \t\n"\
" bl vTaskSwitchContext \t\n"\
"SkipContextSwitch: \t\n"
);
/* Increment the RTOS tick count, then look for the highest priority
task that is ready to run. */
__asm volatile
(
" bl xTaskIncrementTick \t\n" \
" cmp r0, #0 \t\n" \
" beq SkipContextSwitch \t\n" \
" bl vTaskSwitchContext \t\n" \
"SkipContextSwitch: \t\n"
);
/* Ready for the next interrupt. */
T0_IR = portTIMER_MATCH_ISR_BIT;
VICVectAddr = portCLEAR_VIC_INTERRUPT;
/* Ready for the next interrupt. */
T0_IR = portTIMER_MATCH_ISR_BIT;
VICVectAddr = portCLEAR_VIC_INTERRUPT;
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
@ -145,71 +145,71 @@ void vTickISR( void )
*/
#ifdef THUMB_INTERWORK
void vPortDisableInterruptsFromThumb( void ) __attribute__( ( naked ) );
void vPortEnableInterruptsFromThumb( void ) __attribute__( ( naked ) );
void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));
void vPortDisableInterruptsFromThumb( void )
{
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0} \n\t"/* Pop R0. */
"BX R14"); /* Return back to thumb. */
}
void vPortDisableInterruptsFromThumb( void )
{
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0} \n\t" /* Pop R0. */
"BX R14" ); /* Return back to thumb. */
}
void vPortEnableInterruptsFromThumb( void )
{
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0} \n\t"/* Pop R0. */
"BX R14"); /* Return back to thumb. */
}
void vPortEnableInterruptsFromThumb( void )
{
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0} \n\t" /* Pop R0. */
"BX R14" ); /* Return back to thumb. */
}
#endif /* THUMB_INTERWORK */
/* The code generated by the GCC compiler uses the stack in different ways at
* different optimisation levels. The interrupt flags can therefore not always
* be saved to the stack. Instead the critical section nesting level is stored
* in a variable, which is then saved as part of the stack context. */
different optimisation levels. The interrupt flags can therefore not always
be saved to the stack. Instead the critical section nesting level is stored
in a variable, which is then saved as part of the stack context. */
void vPortEnterCritical( void )
{
/* Disable interrupts as per portDISABLE_INTERRUPTS(); */
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0}"); /* Pop R0. */
/* Disable interrupts as per portDISABLE_INTERRUPTS(); */
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0}" ); /* Pop R0. */
/* Now interrupts are disabled ulCriticalNesting can be accessed
* directly. Increment ulCriticalNesting to keep a count of how many times
* portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* Now interrupts are disabled ulCriticalNesting can be accessed
directly. Increment ulCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
}
void vPortExitCritical( void )
{
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as we are leaving a critical section. */
ulCriticalNesting--;
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as we are leaving a critical section. */
ulCriticalNesting--;
/* If the nesting level has reached zero then interrupts should be
* re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable interrupts as per portEXIT_CRITICAL(). */
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0}"); /* Pop R0. */
}
}
/* If the nesting level has reached zero then interrupts should be
re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable interrupts as per portEXIT_CRITICAL(). */
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0}" ); /* Pop R0. */
}
}
}

277
portable/GCC/ARM7_LPC2000/portmacro.h
View file

@ -26,11 +26,11 @@
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,32 +43,32 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE portLONG
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE portLONG
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portNOP() __asm volatile ( "NOP" );
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portNOP() __asm volatile ( "NOP" );
/*-----------------------------------------------------------*/
@ -81,92 +81,92 @@
* THUMB mode code will result in a compile time error.
*/
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Set the LR to the task stack. */ \
__asm volatile ( \
"LDR R0, =pxCurrentTCB \n\t"\
"LDR R0, [R0] \n\t"\
"LDR LR, [R0] \n\t"\
\
/* The critical nesting depth is the first item on the stack. */ \
/* Load it into the ulCriticalNesting variable. */ \
"LDR R0, =ulCriticalNesting \n\t"\
"LDMFD LR!, {R1} \n\t"\
"STR R1, [R0] \n\t"\
\
/* Get the SPSR from the stack. */ \
"LDMFD LR!, {R0} \n\t"\
"MSR SPSR, R0 \n\t"\
\
/* Restore all system mode registers for the task. */ \
"LDMFD LR, {R0-R14}^ \n\t"\
"NOP \n\t"\
\
/* Restore the return address. */ \
"LDR LR, [LR, #+60] \n\t"\
\
/* And return - correcting the offset in the LR to obtain the */ \
/* correct address. */ \
"SUBS PC, LR, #4 \n\t"\
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Set the LR to the task stack. */ \
__asm volatile ( \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"LDR LR, [R0] \n\t" \
\
/* The critical nesting depth is the first item on the stack. */ \
/* Load it into the ulCriticalNesting variable. */ \
"LDR R0, =ulCriticalNesting \n\t" \
"LDMFD LR!, {R1} \n\t" \
"STR R1, [R0] \n\t" \
\
/* Get the SPSR from the stack. */ \
"LDMFD LR!, {R0} \n\t" \
"MSR SPSR, R0 \n\t" \
\
/* Restore all system mode registers for the task. */ \
"LDMFD LR, {R0-R14}^ \n\t" \
"NOP \n\t" \
\
/* Restore the return address. */ \
"LDR LR, [LR, #+60] \n\t" \
\
/* And return - correcting the offset in the LR to obtain the */ \
/* correct address. */ \
"SUBS PC, LR, #4 \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
/*-----------------------------------------------------------*/
#define portSAVE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Push R0 as we are going to use the register. */ \
__asm volatile ( \
"STMDB SP!, {R0} \n\t"\
\
/* Set R0 to point to the task stack pointer. */ \
"STMDB SP,{SP}^ \n\t"\
"NOP \n\t"\
"SUB SP, SP, #4 \n\t"\
"LDMIA SP!,{R0} \n\t"\
\
/* Push the return address onto the stack. */ \
"STMDB R0!, {LR} \n\t"\
\
/* Now we have saved LR we can use it instead of R0. */ \
"MOV LR, R0 \n\t"\
\
/* Pop R0 so we can save it onto the system mode stack. */ \
"LDMIA SP!, {R0} \n\t"\
\
/* Push all the system mode registers onto the task stack. */ \
"STMDB LR,{R0-LR}^ \n\t"\
"NOP \n\t"\
"SUB LR, LR, #60 \n\t"\
\
/* Push the SPSR onto the task stack. */ \
"MRS R0, SPSR \n\t"\
"STMDB LR!, {R0} \n\t"\
\
"LDR R0, =ulCriticalNesting \n\t"\
"LDR R0, [R0] \n\t"\
"STMDB LR!, {R0} \n\t"\
\
/* Store the new top of stack for the task. */ \
"LDR R0, =pxCurrentTCB \n\t"\
"LDR R0, [R0] \n\t"\
"STR LR, [R0] \n\t"\
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portSAVE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Push R0 as we are going to use the register. */ \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" \
\
/* Set R0 to point to the task stack pointer. */ \
"STMDB SP,{SP}^ \n\t" \
"NOP \n\t" \
"SUB SP, SP, #4 \n\t" \
"LDMIA SP!,{R0} \n\t" \
\
/* Push the return address onto the stack. */ \
"STMDB R0!, {LR} \n\t" \
\
/* Now we have saved LR we can use it instead of R0. */ \
"MOV LR, R0 \n\t" \
\
/* Pop R0 so we can save it onto the system mode stack. */ \
"LDMIA SP!, {R0} \n\t" \
\
/* Push all the system mode registers onto the task stack. */ \
"STMDB LR,{R0-LR}^ \n\t" \
"NOP \n\t" \
"SUB LR, LR, #60 \n\t" \
\
/* Push the SPSR onto the task stack. */ \
"MRS R0, SPSR \n\t" \
"STMDB LR!, {R0} \n\t" \
\
"LDR R0, =ulCriticalNesting \n\t" \
"LDR R0, [R0] \n\t" \
"STMDB LR!, {R0} \n\t" \
\
/* Store the new top of stack for the task. */ \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"STR LR, [R0] \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
extern void vTaskSwitchContext( void );
#define portYIELD_FROM_ISR() vTaskSwitchContext()
#define portYIELD() __asm volatile ( "SWI 0" )
extern void vTaskSwitchContext( void );
#define portYIELD_FROM_ISR() vTaskSwitchContext()
#define portYIELD() __asm volatile ( "SWI 0" )
/*-----------------------------------------------------------*/
@ -179,47 +179,48 @@
* defined then the utilities are defined as macros here - as per other ports.
*/
#ifdef THUMB_INTERWORK
#ifdef THUMB_INTERWORK
extern void vPortDisableInterruptsFromThumb( void ) __attribute__( ( naked ) );
extern void vPortEnableInterruptsFromThumb( void ) __attribute__( ( naked ) );
extern void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
extern void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));
#define portDISABLE_INTERRUPTS() vPortDisableInterruptsFromThumb()
#define portENABLE_INTERRUPTS() vPortEnableInterruptsFromThumb()
#define portDISABLE_INTERRUPTS() vPortDisableInterruptsFromThumb()
#define portENABLE_INTERRUPTS() vPortEnableInterruptsFromThumb()
#else
#else
#define portDISABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t"/* Push R0. */\
"MRS R0, CPSR \n\t"/* Get CPSR. */\
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */\
"MSR CPSR, R0 \n\t"/* Write back modified value. */\
"LDMIA SP!, {R0} ") /* Pop R0. */
#define portDISABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#define portENABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t"/* Push R0. */\
"MRS R0, CPSR \n\t"/* Get CPSR. */\
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */\
"MSR CPSR, R0 \n\t"/* Write back modified value. */\
"LDMIA SP!, {R0} ") /* Pop R0. */
#define portENABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#endif /* THUMB_INTERWORK */
#endif /* THUMB_INTERWORK */
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

271
portable/GCC/ARM7_LPC23xx/port.c
View file

@ -27,12 +27,12 @@
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the ARM7 port.
*
* Components that can be compiled to either ARM or THUMB mode are
* contained in this file. The ISR routines, which can only be compiled
* to ARM mode are contained in portISR.c.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the ARM7 port.
*
* Components that can be compiled to either ARM or THUMB mode are
* contained in this file. The ISR routines, which can only be compiled
* to ARM mode are contained in portISR.c.
*----------------------------------------------------------*/
/* Standard includes. */
@ -43,136 +43,134 @@
#include "task.h"
/* Constants required to setup the task context. */
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINSTRUCTION_SIZE ( ( StackType_t ) 4 )
#define portNO_CRITICAL_SECTION_NESTING ( ( StackType_t ) 0 )
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINSTRUCTION_SIZE ( ( StackType_t ) 4 )
#define portNO_CRITICAL_SECTION_NESTING ( ( StackType_t ) 0 )
/* Constants required to setup the tick ISR. */
#define portENABLE_TIMER ( ( uint8_t ) 0x01 )
#define portPRESCALE_VALUE 0x00
#define portINTERRUPT_ON_MATCH ( ( uint32_t ) 0x01 )
#define portRESET_COUNT_ON_MATCH ( ( uint32_t ) 0x02 )
#define portENABLE_TIMER ( ( uint8_t ) 0x01 )
#define portPRESCALE_VALUE 0x00
#define portINTERRUPT_ON_MATCH ( ( uint32_t ) 0x01 )
#define portRESET_COUNT_ON_MATCH ( ( uint32_t ) 0x02 )
/* Constants required to setup the VIC for the tick ISR. */
#define portTIMER_VIC_CHANNEL ( ( uint32_t ) 0x0004 )
#define portTIMER_VIC_CHANNEL_BIT ( ( uint32_t ) 0x0010 )
#define portTIMER_VIC_ENABLE ( ( uint32_t ) 0x0020 )
#define portTIMER_VIC_CHANNEL ( ( uint32_t ) 0x0004 )
#define portTIMER_VIC_CHANNEL_BIT ( ( uint32_t ) 0x0010 )
#define portTIMER_VIC_ENABLE ( ( uint32_t ) 0x0020 )
/*-----------------------------------------------------------*/
/* Setup the timer to generate the tick interrupts. */
static void prvSetupTimerInterrupt( void );
/*
* The scheduler can only be started from ARM mode, so
* vPortISRStartFirstSTask() is defined in portISR.c.
/*
* The scheduler can only be started from ARM mode, so
* vPortISRStartFirstSTask() is defined in portISR.c.
*/
extern void vPortISRStartFirstTask( void );
/*-----------------------------------------------------------*/
/*
* Initialise the stack of a task to look exactly as if a call to
/*
* Initialise the stack of a task to look exactly as if a call to
* portSAVE_CONTEXT had been called.
*
* See header file for description.
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
StackType_t * pxOriginalTOS;
StackType_t *pxOriginalTOS;
pxOriginalTOS = pxTopOfStack;
pxOriginalTOS = pxTopOfStack;
/* To ensure asserts in tasks.c don't fail, although in this case the assert
is not really required. */
pxTopOfStack--;
/* To ensure asserts in tasks.c don't fail, although in this case the assert
* is not really required. */
pxTopOfStack--;
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro. */
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro. */
/* First on the stack is the return address - which in this case is the
start of the task. The offset is added to make the return address appear
as it would within an IRQ ISR. */
*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;
pxTopOfStack--;
/* First on the stack is the return address - which in this case is the
* start of the task. The offset is added to make the return address appear
* as it would within an IRQ ISR. */
*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00000000; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00000000; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
/* When the task starts is will expect to find the function parameter in
R0. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* When the task starts is will expect to find the function parameter in
* R0. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* The last thing onto the stack is the status register, which is set for
system mode, with interrupts enabled. */
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
/* The last thing onto the stack is the status register, which is set for
* system mode, with interrupts enabled. */
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
if( ( ( uint32_t ) pxCode & 0x01UL ) != 0x00 )
{
/* We want the task to start in thumb mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
if( ( ( uint32_t ) pxCode & 0x01UL ) != 0x00 )
{
/* We want the task to start in thumb mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
pxTopOfStack--;
pxTopOfStack--;
/* Some optimisation levels use the stack differently to others. This
means the interrupt flags cannot always be stored on the stack and will
instead be stored in a variable, which is then saved as part of the
tasks context. */
*pxTopOfStack = portNO_CRITICAL_SECTION_NESTING;
/* Some optimisation levels use the stack differently to others. This
* means the interrupt flags cannot always be stored on the stack and will
* instead be stored in a variable, which is then saved as part of the
* tasks context. */
*pxTopOfStack = portNO_CRITICAL_SECTION_NESTING;
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* Start the timer that generates the tick ISR. Interrupts are disabled
* here already. */
prvSetupTimerInterrupt();
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Start the first task. */
vPortISRStartFirstTask();
/* Start the first task. */
vPortISRStartFirstTask();
/* Should not get here! */
return 0;
/* Should not get here! */
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the ARM port will require this function as there
* is nothing to return to. */
/* It is unlikely that the ARM port will require this function as there
is nothing to return to. */
}
/*-----------------------------------------------------------*/
@ -181,52 +179,55 @@ void vPortEndScheduler( void )
*/
static void prvSetupTimerInterrupt( void )
{
uint32_t ulCompareMatch;
uint32_t ulCompareMatch;
PCLKSEL0 = ( PCLKSEL0 & ( ~( 0x3 << 2 ) ) ) | ( 0x01 << 2 );
T0TCR = 2; /* Stop and reset the timer */
T0CTCR = 0; /* Timer mode */
PCLKSEL0 = (PCLKSEL0 & (~(0x3<<2))) | (0x01 << 2);
T0TCR = 2; /* Stop and reset the timer */
T0CTCR = 0; /* Timer mode */
/* A 1ms tick does not require the use of the timer prescale. This is
defaulted to zero but can be used if necessary. */
T0PR = portPRESCALE_VALUE;
/* A 1ms tick does not require the use of the timer prescale. This is
* defaulted to zero but can be used if necessary. */
T0PR = portPRESCALE_VALUE;
/* Calculate the match value required for our wanted tick rate. */
ulCompareMatch = configCPU_CLOCK_HZ / configTICK_RATE_HZ;
/* Calculate the match value required for our wanted tick rate. */
ulCompareMatch = configCPU_CLOCK_HZ / configTICK_RATE_HZ;
/* Protect against divide by zero. Using an if() statement still results
in a warning - hence the #if. */
#if portPRESCALE_VALUE != 0
{
ulCompareMatch /= ( portPRESCALE_VALUE + 1 );
}
#endif
T0MR1 = ulCompareMatch;
/* Protect against divide by zero. Using an if() statement still results
* in a warning - hence the #if. */
#if portPRESCALE_VALUE != 0
{
ulCompareMatch /= ( portPRESCALE_VALUE + 1 );
}
#endif
T0MR1 = ulCompareMatch;
/* Generate tick with timer 0 compare match. */
T0MCR = (3 << 3); /* Reset timer on match and generate interrupt */
/* Generate tick with timer 0 compare match. */
T0MCR = ( 3 << 3 ); /* Reset timer on match and generate interrupt */
/* Setup the VIC for the timer. */
VICIntEnable = 0x00000010;
/* The ISR installed depends on whether the preemptive or cooperative
scheduler is being used. */
#if configUSE_PREEMPTION == 1
{
extern void ( vPreemptiveTick )( void );
VICVectAddr4 = ( int32_t ) vPreemptiveTick;
}
#else
{
extern void ( vNonPreemptiveTick )( void );
VICVectAddr4 = ( int32_t ) vNonPreemptiveTick;
}
#endif
/* Setup the VIC for the timer. */
VICIntEnable = 0x00000010;
VICVectCntl4 = 1;
/* The ISR installed depends on whether the preemptive or cooperative
* scheduler is being used. */
#if configUSE_PREEMPTION == 1
{
extern void( vPreemptiveTick )( void );
VICVectAddr4 = ( int32_t ) vPreemptiveTick;
}
#else
{
extern void( vNonPreemptiveTick )( void );
VICVectAddr4 = ( int32_t ) vNonPreemptiveTick;
}
#endif
VICVectCntl4 = 1;
/* Start the timer - interrupts are disabled when this function is called
* so it is okay to do this here. */
T0TCR = portENABLE_TIMER;
/* Start the timer - interrupts are disabled when this function is called
so it is okay to do this here. */
T0TCR = portENABLE_TIMER;
}
/*-----------------------------------------------------------*/

226
portable/GCC/ARM7_LPC23xx/portISR.c
View file

@ -27,29 +27,29 @@
/*-----------------------------------------------------------
* Components that can be compiled to either ARM or THUMB mode are
* contained in port.c The ISR routines, which can only be compiled
* to ARM mode, are contained in this file.
*----------------------------------------------------------*/
* Components that can be compiled to either ARM or THUMB mode are
* contained in port.c The ISR routines, which can only be compiled
* to ARM mode, are contained in this file.
*----------------------------------------------------------*/
/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
/* Constants required to handle interrupts. */
#define portTIMER_MATCH_ISR_BIT ( ( uint8_t ) 0x01 )
#define portCLEAR_VIC_INTERRUPT ( ( uint32_t ) 0 )
#define portTIMER_MATCH_ISR_BIT ( ( uint8_t ) 0x01 )
#define portCLEAR_VIC_INTERRUPT ( ( uint32_t ) 0 )
/* Constants required to handle critical sections. */
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
volatile uint32_t ulCriticalNesting = 9999UL;
/*-----------------------------------------------------------*/
/* ISR to handle manual context switches (from a call to taskYIELD()). */
void vPortYieldProcessor( void ) __attribute__( ( interrupt( "SWI" ), naked ) );
void vPortYieldProcessor( void ) __attribute__((interrupt("SWI"), naked));
/*
/*
* The scheduler can only be started from ARM mode, hence the inclusion of this
* function here.
*/
@ -58,39 +58,39 @@ void vPortISRStartFirstTask( void );
void vPortISRStartFirstTask( void )
{
/* Simply start the scheduler. This is included here as it can only be
* called from ARM mode. */
portRESTORE_CONTEXT();
/* Simply start the scheduler. This is included here as it can only be
called from ARM mode. */
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
/*
* Called by portYIELD() or taskYIELD() to manually force a context switch.
*
* When a context switch is performed from the task level the saved task
* When a context switch is performed from the task level the saved task
* context is made to look as if it occurred from within the tick ISR. This
* way the same restore context function can be used when restoring the context
* saved from the ISR or that saved from a call to vPortYieldProcessor.
*/
void vPortYieldProcessor( void )
{
/* Within an IRQ ISR the link register has an offset from the true return
* address, but an SWI ISR does not. Add the offset manually so the same
* ISR return code can be used in both cases. */
__asm volatile ( "ADD LR, LR, #4");
/* Within an IRQ ISR the link register has an offset from the true return
address, but an SWI ISR does not. Add the offset manually so the same
ISR return code can be used in both cases. */
__asm volatile ( "ADD LR, LR, #4" );
/* Perform the context switch. First save the context of the current task. */
portSAVE_CONTEXT();
/* Perform the context switch. First save the context of the current task. */
portSAVE_CONTEXT();
/* Find the highest priority task that is ready to run. */
__asm volatile ( "bl vTaskSwitchContext");
/* Find the highest priority task that is ready to run. */
__asm volatile( "bl vTaskSwitchContext" );
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
/*
/*
* The ISR used for the scheduler tick depends on whether the cooperative or
* the preemptive scheduler is being used.
*/
@ -98,46 +98,46 @@ void vPortYieldProcessor( void )
#if configUSE_PREEMPTION == 0
/* The cooperative scheduler requires a normal IRQ service routine to
* simply increment the system tick. */
void vNonPreemptiveTick( void ) __attribute__( ( interrupt( "IRQ" ) ) );
void vNonPreemptiveTick( void )
{
xTaskIncrementTick();
T0IR = 2;
VICVectAddr = portCLEAR_VIC_INTERRUPT;
}
/* The cooperative scheduler requires a normal IRQ service routine to
simply increment the system tick. */
void vNonPreemptiveTick( void ) __attribute__ ((interrupt ("IRQ")));
void vNonPreemptiveTick( void )
{
xTaskIncrementTick();
T0IR = 2;
VICVectAddr = portCLEAR_VIC_INTERRUPT;
}
#else /* if configUSE_PREEMPTION == 0 */
#else
/* The preemptive scheduler is defined as "naked" as the full context is
* saved on entry as part of the context switch. */
void vPreemptiveTick( void ) __attribute__( ( naked ) );
void vPreemptiveTick( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT();
/* The preemptive scheduler is defined as "naked" as the full context is
saved on entry as part of the context switch. */
void vPreemptiveTick( void ) __attribute__((naked));
void vPreemptiveTick( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT();
/* Increment the RTOS tick count, then look for the highest priority
* task that is ready to run. */
__asm volatile
(
" bl xTaskIncrementTick \t\n"\
" cmp r0, #0 \t\n"\
" beq SkipContextSwitch \t\n"\
" bl vTaskSwitchContext \t\n"\
"SkipContextSwitch: \t\n"
);
/* Increment the RTOS tick count, then look for the highest priority
task that is ready to run. */
__asm volatile
(
" bl xTaskIncrementTick \t\n" \
" cmp r0, #0 \t\n" \
" beq SkipContextSwitch \t\n" \
" bl vTaskSwitchContext \t\n" \
"SkipContextSwitch: \t\n"
);
/* Ready for the next interrupt. */
T0IR = 2;
VICVectAddr = portCLEAR_VIC_INTERRUPT;
/* Ready for the next interrupt. */
T0IR = 2;
VICVectAddr = portCLEAR_VIC_INTERRUPT;
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
#endif /* if configUSE_PREEMPTION == 0 */
#endif
/*-----------------------------------------------------------*/
/*
@ -148,71 +148,71 @@ void vPortYieldProcessor( void )
*/
#ifdef THUMB_INTERWORK
void vPortDisableInterruptsFromThumb( void ) __attribute__( ( naked ) );
void vPortEnableInterruptsFromThumb( void ) __attribute__( ( naked ) );
void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));
void vPortDisableInterruptsFromThumb( void )
{
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0} \n\t"/* Pop R0. */
"BX R14"); /* Return back to thumb. */
}
void vPortEnableInterruptsFromThumb( void )
{
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0} \n\t"/* Pop R0. */
"BX R14"); /* Return back to thumb. */
}
void vPortDisableInterruptsFromThumb( void )
{
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0} \n\t" /* Pop R0. */
"BX R14" ); /* Return back to thumb. */
}
void vPortEnableInterruptsFromThumb( void )
{
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0} \n\t" /* Pop R0. */
"BX R14" ); /* Return back to thumb. */
}
#endif /* THUMB_INTERWORK */
/* The code generated by the GCC compiler uses the stack in different ways at
* different optimisation levels. The interrupt flags can therefore not always
* be saved to the stack. Instead the critical section nesting level is stored
* in a variable, which is then saved as part of the stack context. */
different optimisation levels. The interrupt flags can therefore not always
be saved to the stack. Instead the critical section nesting level is stored
in a variable, which is then saved as part of the stack context. */
void vPortEnterCritical( void )
{
/* Disable interrupts as per portDISABLE_INTERRUPTS(); */
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0}"); /* Pop R0. */
/* Disable interrupts as per portDISABLE_INTERRUPTS(); */
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0}" ); /* Pop R0. */
/* Now interrupts are disabled ulCriticalNesting can be accessed
* directly. Increment ulCriticalNesting to keep a count of how many times
* portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* Now interrupts are disabled ulCriticalNesting can be accessed
directly. Increment ulCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
}
void vPortExitCritical( void )
{
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as we are leaving a critical section. */
ulCriticalNesting--;
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as we are leaving a critical section. */
ulCriticalNesting--;
/* If the nesting level has reached zero then interrupts should be
* re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable interrupts as per portEXIT_CRITICAL(). */
__asm volatile (
"STMDB SP!, {R0} \n\t"/* Push R0. */
"MRS R0, CPSR \n\t"/* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t"/* Write back modified value. */
"LDMIA SP!, {R0}"); /* Pop R0. */
}
}
/* If the nesting level has reached zero then interrupts should be
re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable interrupts as per portEXIT_CRITICAL(). */
__asm volatile (
"STMDB SP!, {R0} \n\t" /* Push R0. */
"MRS R0, CPSR \n\t" /* Get CPSR. */
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */
"MSR CPSR, R0 \n\t" /* Write back modified value. */
"LDMIA SP!, {R0}" ); /* Pop R0. */
}
}
}

317
portable/GCC/ARM7_LPC23xx/portmacro.h
View file

@ -26,34 +26,34 @@
*/
/*
* Changes from V3.2.3
*
+ Modified portENTER_SWITCHING_ISR() to allow use with GCC V4.0.1.
+
+ Changes from V3.2.4
+
+ Removed the use of the %0 parameter within the assembler macros and
+ replaced them with hard coded registers. This will ensure the
+ assembler does not select the link register as the temp register as
+ was occasionally happening previously.
+
+ The assembler statements are now included in a single asm block rather
+ than each line having its own asm block.
+
+ Changes from V4.5.0
+
+ Removed the portENTER_SWITCHING_ISR() and portEXIT_SWITCHING_ISR() macros
+ and replaced them with portYIELD_FROM_ISR() macro. Application code
+ should now make use of the portSAVE_CONTEXT() and portRESTORE_CONTEXT()
+ macros as per the V4.5.1 demo code.
*/
Changes from V3.2.3
+ Modified portENTER_SWITCHING_ISR() to allow use with GCC V4.0.1.
Changes from V3.2.4
+ Removed the use of the %0 parameter within the assembler macros and
replaced them with hard coded registers. This will ensure the
assembler does not select the link register as the temp register as
was occasionally happening previously.
+ The assembler statements are now included in a single asm block rather
than each line having its own asm block.
Changes from V4.5.0
+ Removed the portENTER_SWITCHING_ISR() and portEXIT_SWITCHING_ISR() macros
and replaced them with portYIELD_FROM_ISR() macro. Application code
should now make use of the portSAVE_CONTEXT() and portRESTORE_CONTEXT()
macros as per the V4.5.1 demo code.
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -66,32 +66,32 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE portLONG
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE portLONG
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portNOP() __asm volatile ( "NOP" );
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portNOP() __asm volatile ( "NOP" );
/*-----------------------------------------------------------*/
@ -104,92 +104,92 @@
* THUMB mode code will result in a compile time error.
*/
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Set the LR to the task stack. */ \
__asm volatile ( \
"LDR R0, =pxCurrentTCB \n\t"\
"LDR R0, [R0] \n\t"\
"LDR LR, [R0] \n\t"\
\
/* The critical nesting depth is the first item on the stack. */ \
/* Load it into the ulCriticalNesting variable. */ \
"LDR R0, =ulCriticalNesting \n\t"\
"LDMFD LR!, {R1} \n\t"\
"STR R1, [R0] \n\t"\
\
/* Get the SPSR from the stack. */ \
"LDMFD LR!, {R0} \n\t"\
"MSR SPSR, R0 \n\t"\
\
/* Restore all system mode registers for the task. */ \
"LDMFD LR, {R0-R14}^ \n\t"\
"NOP \n\t"\
\
/* Restore the return address. */ \
"LDR LR, [LR, #+60] \n\t"\
\
/* And return - correcting the offset in the LR to obtain the */ \
/* correct address. */ \
"SUBS PC, LR, #4 \n\t"\
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Set the LR to the task stack. */ \
__asm volatile ( \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"LDR LR, [R0] \n\t" \
\
/* The critical nesting depth is the first item on the stack. */ \
/* Load it into the ulCriticalNesting variable. */ \
"LDR R0, =ulCriticalNesting \n\t" \
"LDMFD LR!, {R1} \n\t" \
"STR R1, [R0] \n\t" \
\
/* Get the SPSR from the stack. */ \
"LDMFD LR!, {R0} \n\t" \
"MSR SPSR, R0 \n\t" \
\
/* Restore all system mode registers for the task. */ \
"LDMFD LR, {R0-R14}^ \n\t" \
"NOP \n\t" \
\
/* Restore the return address. */ \
"LDR LR, [LR, #+60] \n\t" \
\
/* And return - correcting the offset in the LR to obtain the */ \
/* correct address. */ \
"SUBS PC, LR, #4 \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
/*-----------------------------------------------------------*/
#define portSAVE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Push R0 as we are going to use the register. */ \
__asm volatile ( \
"STMDB SP!, {R0} \n\t"\
\
/* Set R0 to point to the task stack pointer. */ \
"STMDB SP,{SP}^ \n\t"\
"NOP \n\t"\
"SUB SP, SP, #4 \n\t"\
"LDMIA SP!,{R0} \n\t"\
\
/* Push the return address onto the stack. */ \
"STMDB R0!, {LR} \n\t"\
\
/* Now we have saved LR we can use it instead of R0. */ \
"MOV LR, R0 \n\t"\
\
/* Pop R0 so we can save it onto the system mode stack. */ \
"LDMIA SP!, {R0} \n\t"\
\
/* Push all the system mode registers onto the task stack. */ \
"STMDB LR,{R0-LR}^ \n\t"\
"NOP \n\t"\
"SUB LR, LR, #60 \n\t"\
\
/* Push the SPSR onto the task stack. */ \
"MRS R0, SPSR \n\t"\
"STMDB LR!, {R0} \n\t"\
\
"LDR R0, =ulCriticalNesting \n\t"\
"LDR R0, [R0] \n\t"\
"STMDB LR!, {R0} \n\t"\
\
/* Store the new top of stack for the task. */ \
"LDR R0, =pxCurrentTCB \n\t"\
"LDR R0, [R0] \n\t"\
"STR LR, [R0] \n\t"\
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portSAVE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile uint32_t ulCriticalNesting; \
\
/* Push R0 as we are going to use the register. */ \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" \
\
/* Set R0 to point to the task stack pointer. */ \
"STMDB SP,{SP}^ \n\t" \
"NOP \n\t" \
"SUB SP, SP, #4 \n\t" \
"LDMIA SP!,{R0} \n\t" \
\
/* Push the return address onto the stack. */ \
"STMDB R0!, {LR} \n\t" \
\
/* Now we have saved LR we can use it instead of R0. */ \
"MOV LR, R0 \n\t" \
\
/* Pop R0 so we can save it onto the system mode stack. */ \
"LDMIA SP!, {R0} \n\t" \
\
/* Push all the system mode registers onto the task stack. */ \
"STMDB LR,{R0-LR}^ \n\t" \
"NOP \n\t" \
"SUB LR, LR, #60 \n\t" \
\
/* Push the SPSR onto the task stack. */ \
"MRS R0, SPSR \n\t" \
"STMDB LR!, {R0} \n\t" \
\
"LDR R0, =ulCriticalNesting \n\t" \
"LDR R0, [R0] \n\t" \
"STMDB LR!, {R0} \n\t" \
\
/* Store the new top of stack for the task. */ \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"STR LR, [R0] \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portYIELD_FROM_ISR() vTaskSwitchContext()
#define portYIELD() __asm volatile ( "SWI 0" )
#define portYIELD_FROM_ISR() vTaskSwitchContext()
#define portYIELD() __asm volatile ( "SWI 0" )
/*-----------------------------------------------------------*/
@ -202,47 +202,48 @@
* defined then the utilities are defined as macros here - as per other ports.
*/
#ifdef THUMB_INTERWORK
#ifdef THUMB_INTERWORK
extern void vPortDisableInterruptsFromThumb( void ) __attribute__( ( naked ) );
extern void vPortEnableInterruptsFromThumb( void ) __attribute__( ( naked ) );
extern void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
extern void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));
#define portDISABLE_INTERRUPTS() vPortDisableInterruptsFromThumb()
#define portENABLE_INTERRUPTS() vPortEnableInterruptsFromThumb()
#define portDISABLE_INTERRUPTS() vPortDisableInterruptsFromThumb()
#define portENABLE_INTERRUPTS() vPortEnableInterruptsFromThumb()
#else
#else
#define portDISABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t"/* Push R0. */\
"MRS R0, CPSR \n\t"/* Get CPSR. */\
"ORR R0, R0, #0xC0 \n\t"/* Disable IRQ, FIQ. */\
"MSR CPSR, R0 \n\t"/* Write back modified value. */\
"LDMIA SP!, {R0} ") /* Pop R0. */
#define portDISABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#define portENABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t"/* Push R0. */\
"MRS R0, CPSR \n\t"/* Get CPSR. */\
"BIC R0, R0, #0xC0 \n\t"/* Enable IRQ, FIQ. */\
"MSR CPSR, R0 \n\t"/* Write back modified value. */\
"LDMIA SP!, {R0} ") /* Pop R0. */
#define portENABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#endif /* THUMB_INTERWORK */
#endif /* THUMB_INTERWORK */
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

639
portable/GCC/ARM_CA53_64_BIT/port.c
View file

@ -33,104 +33,104 @@
#include "task.h"
#ifndef configINTERRUPT_CONTROLLER_BASE_ADDRESS
#error configINTERRUPT_CONTROLLER_BASE_ADDRESS must be defined. See http: /*www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html */
#error configINTERRUPT_CONTROLLER_BASE_ADDRESS must be defined. See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
#endif
#ifndef configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET
#error configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET must be defined. See http: /*www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html */
#error configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET must be defined. See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
#endif
#ifndef configUNIQUE_INTERRUPT_PRIORITIES
#error configUNIQUE_INTERRUPT_PRIORITIES must be defined. See http: /*www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html */
#error configUNIQUE_INTERRUPT_PRIORITIES must be defined. See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
#endif
#ifndef configSETUP_TICK_INTERRUPT
#error configSETUP_TICK_INTERRUPT() must be defined. See http: /*www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html */
#error configSETUP_TICK_INTERRUPT() must be defined. See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
#endif /* configSETUP_TICK_INTERRUPT */
#ifndef configMAX_API_CALL_INTERRUPT_PRIORITY
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be defined. See http: /*www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html */
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be defined. See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
#endif
#if configMAX_API_CALL_INTERRUPT_PRIORITY == 0
#error configMAX_API_CALL_INTERRUPT_PRIORITY must not be set to 0
#error configMAX_API_CALL_INTERRUPT_PRIORITY must not be set to 0
#endif
#if configMAX_API_CALL_INTERRUPT_PRIORITY > configUNIQUE_INTERRUPT_PRIORITIES
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be less than or equal to configUNIQUE_INTERRUPT_PRIORITIES as the lower the numeric priority value the higher the logical interrupt priority
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be less than or equal to configUNIQUE_INTERRUPT_PRIORITIES as the lower the numeric priority value the higher the logical interrupt priority
#endif
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
/* Check the configuration. */
#if ( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
/* Check the configuration. */
#if( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
/* In case security extensions are implemented. */
#if configMAX_API_CALL_INTERRUPT_PRIORITY <= ( configUNIQUE_INTERRUPT_PRIORITIES / 2 )
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be greater than ( configUNIQUE_INTERRUPT_PRIORITIES / 2 )
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be greater than ( configUNIQUE_INTERRUPT_PRIORITIES / 2 )
#endif
/* Some vendor specific files default configCLEAR_TICK_INTERRUPT() in
* portmacro.h. */
portmacro.h. */
#ifndef configCLEAR_TICK_INTERRUPT
#define configCLEAR_TICK_INTERRUPT()
#define configCLEAR_TICK_INTERRUPT()
#endif
/* A critical section is exited when the critical section nesting count reaches
* this value. */
#define portNO_CRITICAL_NESTING ( ( size_t ) 0 )
this value. */
#define portNO_CRITICAL_NESTING ( ( size_t ) 0 )
/* In all GICs 255 can be written to the priority mask register to unmask all
* (but the lowest) interrupt priority. */
#define portUNMASK_VALUE ( 0xFFUL )
(but the lowest) interrupt priority. */
#define portUNMASK_VALUE ( 0xFFUL )
/* Tasks are not created with a floating point context, but can be given a
* floating point context after they have been created. A variable is stored as
* part of the tasks context that holds portNO_FLOATING_POINT_CONTEXT if the task
* does not have an FPU context, or any other value if the task does have an FPU
* context. */
#define portNO_FLOATING_POINT_CONTEXT ( ( StackType_t ) 0 )
floating point context after they have been created. A variable is stored as
part of the tasks context that holds portNO_FLOATING_POINT_CONTEXT if the task
does not have an FPU context, or any other value if the task does have an FPU
context. */
#define portNO_FLOATING_POINT_CONTEXT ( ( StackType_t ) 0 )
/* Constants required to setup the initial task context. */
#define portSP_ELx ( ( StackType_t ) 0x01 )
#define portSP_EL0 ( ( StackType_t ) 0x00 )
#define portSP_ELx ( ( StackType_t ) 0x01 )
#define portSP_EL0 ( ( StackType_t ) 0x00 )
#if defined( GUEST )
#define portEL1 ( ( StackType_t ) 0x04 )
#define portINITIAL_PSTATE ( portEL1 | portSP_EL0 )
#define portEL1 ( ( StackType_t ) 0x04 )
#define portINITIAL_PSTATE ( portEL1 | portSP_EL0 )
#else
#define portEL3 ( ( StackType_t ) 0x0c )
/* At the time of writing, the BSP only supports EL3. */
#define portINITIAL_PSTATE ( portEL3 | portSP_EL0 )
#define portEL3 ( ( StackType_t ) 0x0c )
/* At the time of writing, the BSP only supports EL3. */
#define portINITIAL_PSTATE ( portEL3 | portSP_EL0 )
#endif
/* Used by portASSERT_IF_INTERRUPT_PRIORITY_INVALID() when ensuring the binary
* point is zero. */
#define portBINARY_POINT_BITS ( ( uint8_t ) 0x03 )
point is zero. */
#define portBINARY_POINT_BITS ( ( uint8_t ) 0x03 )
/* Masks all bits in the APSR other than the mode bits. */
#define portAPSR_MODE_BITS_MASK ( 0x0C )
#define portAPSR_MODE_BITS_MASK ( 0x0C )
/* The I bit in the DAIF bits. */
#define portDAIF_I ( 0x80 )
#define portDAIF_I ( 0x80 )
/* Macro to unmask all interrupt priorities. */
#define portCLEAR_INTERRUPT_MASK() \
{ \
portDISABLE_INTERRUPTS(); \
portICCPMR_PRIORITY_MASK_REGISTER = portUNMASK_VALUE; \
__asm volatile ( "DSB SY \n" \
"ISB SY \n"); \
portENABLE_INTERRUPTS(); \
}
#define portCLEAR_INTERRUPT_MASK() \
{ \
portDISABLE_INTERRUPTS(); \
portICCPMR_PRIORITY_MASK_REGISTER = portUNMASK_VALUE; \
__asm volatile ( "DSB SY \n" \
"ISB SY \n" ); \
portENABLE_INTERRUPTS(); \
}
/* Hardware specifics used when sanity checking the configuration. */
#define portINTERRUPT_PRIORITY_REGISTER_OFFSET 0x400UL
#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff )
#define portBIT_0_SET ( ( uint8_t ) 0x01 )
#define portINTERRUPT_PRIORITY_REGISTER_OFFSET 0x400UL
#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff )
#define portBIT_0_SET ( ( uint8_t ) 0x01 )
/*-----------------------------------------------------------*/
@ -143,381 +143,376 @@ extern void vPortRestoreTaskContext( void );
/*-----------------------------------------------------------*/
/* A variable is used to keep track of the critical section nesting. This
* variable has to be stored as part of the task context and must be initialised to
* a non zero value to ensure interrupts don't inadvertently become unmasked before
* the scheduler starts. As it is stored as part of the task context it will
* automatically be set to 0 when the first task is started. */
variable has to be stored as part of the task context and must be initialised to
a non zero value to ensure interrupts don't inadvertently become unmasked before
the scheduler starts. As it is stored as part of the task context it will
automatically be set to 0 when the first task is started. */
volatile uint64_t ullCriticalNesting = 9999ULL;
/* Saved as part of the task context. If ullPortTaskHasFPUContext is non-zero
* then floating point context must be saved and restored for the task. */
then floating point context must be saved and restored for the task. */
uint64_t ullPortTaskHasFPUContext = pdFALSE;
/* Set to 1 to pend a context switch from an ISR. */
uint64_t ullPortYieldRequired = pdFALSE;
/* Counts the interrupt nesting depth. A context switch is only performed if
* if the nesting depth is 0. */
if the nesting depth is 0. */
uint64_t ullPortInterruptNesting = 0;
/* Used in the ASM code. */
__attribute__( ( used ) ) const uint64_t ullICCEOIR = portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS;
__attribute__( ( used ) ) const uint64_t ullICCIAR = portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS;
__attribute__( ( used ) ) const uint64_t ullICCPMR = portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS;
__attribute__( ( used ) ) const uint64_t ullMaxAPIPriorityMask = ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
__attribute__(( used )) const uint64_t ullICCEOIR = portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS;
__attribute__(( used )) const uint64_t ullICCIAR = portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS;
__attribute__(( used )) const uint64_t ullICCPMR = portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS;
__attribute__(( used )) const uint64_t ullMaxAPIPriorityMask = ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
/*-----------------------------------------------------------*/
/*
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro. */
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro. */
/* First all the general purpose registers. */
pxTopOfStack--;
*pxTopOfStack = 0x0101010101010101ULL; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
*pxTopOfStack = 0x0303030303030303ULL; /* R3 */
pxTopOfStack--;
*pxTopOfStack = 0x0202020202020202ULL; /* R2 */
pxTopOfStack--;
*pxTopOfStack = 0x0505050505050505ULL; /* R5 */
pxTopOfStack--;
*pxTopOfStack = 0x0404040404040404ULL; /* R4 */
pxTopOfStack--;
*pxTopOfStack = 0x0707070707070707ULL; /* R7 */
pxTopOfStack--;
*pxTopOfStack = 0x0606060606060606ULL; /* R6 */
pxTopOfStack--;
*pxTopOfStack = 0x0909090909090909ULL; /* R9 */
pxTopOfStack--;
*pxTopOfStack = 0x0808080808080808ULL; /* R8 */
pxTopOfStack--;
*pxTopOfStack = 0x1111111111111111ULL; /* R11 */
pxTopOfStack--;
*pxTopOfStack = 0x1010101010101010ULL; /* R10 */
pxTopOfStack--;
*pxTopOfStack = 0x1313131313131313ULL; /* R13 */
pxTopOfStack--;
*pxTopOfStack = 0x1212121212121212ULL; /* R12 */
pxTopOfStack--;
*pxTopOfStack = 0x1515151515151515ULL; /* R15 */
pxTopOfStack--;
*pxTopOfStack = 0x1414141414141414ULL; /* R14 */
pxTopOfStack--;
*pxTopOfStack = 0x1717171717171717ULL; /* R17 */
pxTopOfStack--;
*pxTopOfStack = 0x1616161616161616ULL; /* R16 */
pxTopOfStack--;
*pxTopOfStack = 0x1919191919191919ULL; /* R19 */
pxTopOfStack--;
*pxTopOfStack = 0x1818181818181818ULL; /* R18 */
pxTopOfStack--;
*pxTopOfStack = 0x2121212121212121ULL; /* R21 */
pxTopOfStack--;
*pxTopOfStack = 0x2020202020202020ULL; /* R20 */
pxTopOfStack--;
*pxTopOfStack = 0x2323232323232323ULL; /* R23 */
pxTopOfStack--;
*pxTopOfStack = 0x2222222222222222ULL; /* R22 */
pxTopOfStack--;
*pxTopOfStack = 0x2525252525252525ULL; /* R25 */
pxTopOfStack--;
*pxTopOfStack = 0x2424242424242424ULL; /* R24 */
pxTopOfStack--;
*pxTopOfStack = 0x2727272727272727ULL; /* R27 */
pxTopOfStack--;
*pxTopOfStack = 0x2626262626262626ULL; /* R26 */
pxTopOfStack--;
*pxTopOfStack = 0x2929292929292929ULL; /* R29 */
pxTopOfStack--;
*pxTopOfStack = 0x2828282828282828ULL; /* R28 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00; /* XZR - has no effect, used so there are an even number of registers. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00; /* R30 - procedure call link register. */
pxTopOfStack--;
/* First all the general purpose registers. */
pxTopOfStack--;
*pxTopOfStack = 0x0101010101010101ULL; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
*pxTopOfStack = 0x0303030303030303ULL; /* R3 */
pxTopOfStack--;
*pxTopOfStack = 0x0202020202020202ULL; /* R2 */
pxTopOfStack--;
*pxTopOfStack = 0x0505050505050505ULL; /* R5 */
pxTopOfStack--;
*pxTopOfStack = 0x0404040404040404ULL; /* R4 */
pxTopOfStack--;
*pxTopOfStack = 0x0707070707070707ULL; /* R7 */
pxTopOfStack--;
*pxTopOfStack = 0x0606060606060606ULL; /* R6 */
pxTopOfStack--;
*pxTopOfStack = 0x0909090909090909ULL; /* R9 */
pxTopOfStack--;
*pxTopOfStack = 0x0808080808080808ULL; /* R8 */
pxTopOfStack--;
*pxTopOfStack = 0x1111111111111111ULL; /* R11 */
pxTopOfStack--;
*pxTopOfStack = 0x1010101010101010ULL; /* R10 */
pxTopOfStack--;
*pxTopOfStack = 0x1313131313131313ULL; /* R13 */
pxTopOfStack--;
*pxTopOfStack = 0x1212121212121212ULL; /* R12 */
pxTopOfStack--;
*pxTopOfStack = 0x1515151515151515ULL; /* R15 */
pxTopOfStack--;
*pxTopOfStack = 0x1414141414141414ULL; /* R14 */
pxTopOfStack--;
*pxTopOfStack = 0x1717171717171717ULL; /* R17 */
pxTopOfStack--;
*pxTopOfStack = 0x1616161616161616ULL; /* R16 */
pxTopOfStack--;
*pxTopOfStack = 0x1919191919191919ULL; /* R19 */
pxTopOfStack--;
*pxTopOfStack = 0x1818181818181818ULL; /* R18 */
pxTopOfStack--;
*pxTopOfStack = 0x2121212121212121ULL; /* R21 */
pxTopOfStack--;
*pxTopOfStack = 0x2020202020202020ULL; /* R20 */
pxTopOfStack--;
*pxTopOfStack = 0x2323232323232323ULL; /* R23 */
pxTopOfStack--;
*pxTopOfStack = 0x2222222222222222ULL; /* R22 */
pxTopOfStack--;
*pxTopOfStack = 0x2525252525252525ULL; /* R25 */
pxTopOfStack--;
*pxTopOfStack = 0x2424242424242424ULL; /* R24 */
pxTopOfStack--;
*pxTopOfStack = 0x2727272727272727ULL; /* R27 */
pxTopOfStack--;
*pxTopOfStack = 0x2626262626262626ULL; /* R26 */
pxTopOfStack--;
*pxTopOfStack = 0x2929292929292929ULL; /* R29 */
pxTopOfStack--;
*pxTopOfStack = 0x2828282828282828ULL; /* R28 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00; /* XZR - has no effect, used so there are an even number of registers. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00; /* R30 - procedure call link register. */
pxTopOfStack--;
*pxTopOfStack = portINITIAL_PSTATE;
pxTopOfStack--;
*pxTopOfStack = portINITIAL_PSTATE;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxCode; /* Exception return address. */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxCode; /* Exception return address. */
pxTopOfStack--;
/* The task will start with a critical nesting count of 0 as interrupts are
* enabled. */
*pxTopOfStack = portNO_CRITICAL_NESTING;
pxTopOfStack--;
/* The task will start with a critical nesting count of 0 as interrupts are
enabled. */
*pxTopOfStack = portNO_CRITICAL_NESTING;
pxTopOfStack--;
/* The task will start without a floating point context. A task that uses
* the floating point hardware must call vPortTaskUsesFPU() before executing
* any floating point instructions. */
*pxTopOfStack = portNO_FLOATING_POINT_CONTEXT;
/* The task will start without a floating point context. A task that uses
the floating point hardware must call vPortTaskUsesFPU() before executing
any floating point instructions. */
*pxTopOfStack = portNO_FLOATING_POINT_CONTEXT;
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
uint32_t ulAPSR;
uint32_t ulAPSR;
#if ( configASSERT_DEFINED == 1 )
{
volatile uint32_t ulOriginalPriority;
volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + portINTERRUPT_PRIORITY_REGISTER_OFFSET );
volatile uint8_t ucMaxPriorityValue;
#if( configASSERT_DEFINED == 1 )
{
volatile uint32_t ulOriginalPriority;
volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + portINTERRUPT_PRIORITY_REGISTER_OFFSET );
volatile uint8_t ucMaxPriorityValue;
/* Determine how many priority bits are implemented in the GIC.
*
* Save the interrupt priority value that is about to be clobbered. */
ulOriginalPriority = *pucFirstUserPriorityRegister;
/* Determine how many priority bits are implemented in the GIC.
/* Determine the number of priority bits available. First write to
* all possible bits. */
*pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;
Save the interrupt priority value that is about to be clobbered. */
ulOriginalPriority = *pucFirstUserPriorityRegister;
/* Read the value back to see how many bits stuck. */
ucMaxPriorityValue = *pucFirstUserPriorityRegister;
/* Determine the number of priority bits available. First write to
all possible bits. */
*pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;
/* Shift to the least significant bits. */
while( ( ucMaxPriorityValue & portBIT_0_SET ) != portBIT_0_SET )
{
ucMaxPriorityValue >>= ( uint8_t ) 0x01;
}
/* Read the value back to see how many bits stuck. */
ucMaxPriorityValue = *pucFirstUserPriorityRegister;
/* Sanity check configUNIQUE_INTERRUPT_PRIORITIES matches the read
* value. */
/* Shift to the least significant bits. */
while( ( ucMaxPriorityValue & portBIT_0_SET ) != portBIT_0_SET )
{
ucMaxPriorityValue >>= ( uint8_t ) 0x01;
}
configASSERT( ucMaxPriorityValue >= portLOWEST_INTERRUPT_PRIORITY );
/* Sanity check configUNIQUE_INTERRUPT_PRIORITIES matches the read
value. */
configASSERT( ucMaxPriorityValue >= portLOWEST_INTERRUPT_PRIORITY );
/* Restore the clobbered interrupt priority register to its original
* value. */
*pucFirstUserPriorityRegister = ulOriginalPriority;
}
#endif /* conifgASSERT_DEFINED */
/* Restore the clobbered interrupt priority register to its original
value. */
*pucFirstUserPriorityRegister = ulOriginalPriority;
}
#endif /* conifgASSERT_DEFINED */
/* At the time of writing, the BSP only supports EL3. */
__asm volatile ( "MRS %0, CurrentEL" : "=r" ( ulAPSR ) );
ulAPSR &= portAPSR_MODE_BITS_MASK;
/* At the time of writing, the BSP only supports EL3. */
__asm volatile ( "MRS %0, CurrentEL" : "=r" ( ulAPSR ) );
ulAPSR &= portAPSR_MODE_BITS_MASK;
#if defined( GUEST )
#warning Building for execution as a guest under XEN. THIS IS NOT A FULLY TESTED PATH.
configASSERT( ulAPSR == portEL1 );
#if defined( GUEST )
#warning Building for execution as a guest under XEN. THIS IS NOT A FULLY TESTED PATH.
configASSERT( ulAPSR == portEL1 );
if( ulAPSR == portEL1 )
#else
configASSERT( ulAPSR == portEL3 );
if( ulAPSR == portEL3 )
#endif
{
/* Only continue if the binary point value is set to its lowest possible
setting. See the comments in vPortValidateInterruptPriority() below for
more information. */
configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE );
if( ulAPSR == portEL1 )
#else
configASSERT( ulAPSR == portEL3 );
if( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE )
{
/* Interrupts are turned off in the CPU itself to ensure a tick does
not execute while the scheduler is being started. Interrupts are
automatically turned back on in the CPU when the first task starts
executing. */
portDISABLE_INTERRUPTS();
if( ulAPSR == portEL3 )
#endif
{
/* Only continue if the binary point value is set to its lowest possible
* setting. See the comments in vPortValidateInterruptPriority() below for
* more information. */
configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE );
/* Start the timer that generates the tick ISR. */
configSETUP_TICK_INTERRUPT();
if( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE )
{
/* Interrupts are turned off in the CPU itself to ensure a tick does
* not execute while the scheduler is being started. Interrupts are
* automatically turned back on in the CPU when the first task starts
* executing. */
portDISABLE_INTERRUPTS();
/* Start the first task executing. */
vPortRestoreTaskContext();
}
}
/* Start the timer that generates the tick ISR. */
configSETUP_TICK_INTERRUPT();
/* Start the first task executing. */
vPortRestoreTaskContext();
}
}
return 0;
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* Not implemented in ports where there is nothing to return to.
* Artificially force an assert. */
configASSERT( ullCriticalNesting == 1000ULL );
/* Not implemented in ports where there is nothing to return to.
Artificially force an assert. */
configASSERT( ullCriticalNesting == 1000ULL );
}
/*-----------------------------------------------------------*/
void vPortEnterCritical( void )
{
/* Mask interrupts up to the max syscall interrupt priority. */
uxPortSetInterruptMask();
/* Mask interrupts up to the max syscall interrupt priority. */
uxPortSetInterruptMask();
/* Now interrupts are disabled ullCriticalNesting can be accessed
* directly. Increment ullCriticalNesting to keep a count of how many times
* portENTER_CRITICAL() has been called. */
ullCriticalNesting++;
/* Now interrupts are disabled ullCriticalNesting can be accessed
directly. Increment ullCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ullCriticalNesting++;
/* This is not the interrupt safe version of the enter critical function so
* assert() if it is being called from an interrupt context. Only API
* functions that end in "FromISR" can be used in an interrupt. Only assert if
* the critical nesting count is 1 to protect against recursive calls if the
* assert function also uses a critical section. */
if( ullCriticalNesting == 1ULL )
{
configASSERT( ullPortInterruptNesting == 0 );
}
/* This is not the interrupt safe version of the enter critical function so
assert() if it is being called from an interrupt context. Only API
functions that end in "FromISR" can be used in an interrupt. Only assert if
the critical nesting count is 1 to protect against recursive calls if the
assert function also uses a critical section. */
if( ullCriticalNesting == 1ULL )
{
configASSERT( ullPortInterruptNesting == 0 );
}
}
/*-----------------------------------------------------------*/
void vPortExitCritical( void )
{
if( ullCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as the critical section is being
* exited. */
ullCriticalNesting--;
if( ullCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as the critical section is being
exited. */
ullCriticalNesting--;
/* If the nesting level has reached zero then all interrupt
* priorities must be re-enabled. */
if( ullCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Critical nesting has reached zero so all interrupt priorities
* should be unmasked. */
portCLEAR_INTERRUPT_MASK();
}
}
/* If the nesting level has reached zero then all interrupt
priorities must be re-enabled. */
if( ullCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Critical nesting has reached zero so all interrupt priorities
should be unmasked. */
portCLEAR_INTERRUPT_MASK();
}
}
}
/*-----------------------------------------------------------*/
void FreeRTOS_Tick_Handler( void )
{
/* Must be the lowest possible priority. */
#if !defined( QEMU )
{
configASSERT( portICCRPR_RUNNING_PRIORITY_REGISTER == ( uint32_t ) ( portLOWEST_USABLE_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) );
}
#endif
/* Must be the lowest possible priority. */
#if !defined( QEMU )
{
configASSERT( portICCRPR_RUNNING_PRIORITY_REGISTER == ( uint32_t ) ( portLOWEST_USABLE_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) );
}
#endif
/* Interrupts should not be enabled before this point. */
#if ( configASSERT_DEFINED == 1 )
{
uint32_t ulMaskBits;
/* Interrupts should not be enabled before this point. */
#if( configASSERT_DEFINED == 1 )
{
uint32_t ulMaskBits;
__asm volatile ( "mrs %0, daif" : "=r" ( ulMaskBits )::"memory" );
configASSERT( ( ulMaskBits & portDAIF_I ) != 0 );
}
#endif /* configASSERT_DEFINED */
__asm volatile( "mrs %0, daif" : "=r"( ulMaskBits ) :: "memory" );
configASSERT( ( ulMaskBits & portDAIF_I ) != 0 );
}
#endif /* configASSERT_DEFINED */
/* Set interrupt mask before altering scheduler structures. The tick
* handler runs at the lowest priority, so interrupts cannot already be masked,
* so there is no need to save and restore the current mask value. It is
* necessary to turn off interrupts in the CPU itself while the ICCPMR is being
* updated. */
portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
__asm volatile ( "dsb sy \n"
"isb sy \n"::: "memory" );
/* Set interrupt mask before altering scheduler structures. The tick
handler runs at the lowest priority, so interrupts cannot already be masked,
so there is no need to save and restore the current mask value. It is
necessary to turn off interrupts in the CPU itself while the ICCPMR is being
updated. */
portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
__asm volatile ( "dsb sy \n"
"isb sy \n" ::: "memory" );
/* Ok to enable interrupts after the interrupt source has been cleared. */
configCLEAR_TICK_INTERRUPT();
portENABLE_INTERRUPTS();
/* Ok to enable interrupts after the interrupt source has been cleared. */
configCLEAR_TICK_INTERRUPT();
portENABLE_INTERRUPTS();
/* Increment the RTOS tick. */
if( xTaskIncrementTick() != pdFALSE )
{
ullPortYieldRequired = pdTRUE;
}
/* Increment the RTOS tick. */
if( xTaskIncrementTick() != pdFALSE )
{
ullPortYieldRequired = pdTRUE;
}
/* Ensure all interrupt priorities are active again. */
portCLEAR_INTERRUPT_MASK();
/* Ensure all interrupt priorities are active again. */
portCLEAR_INTERRUPT_MASK();
}
/*-----------------------------------------------------------*/
void vPortTaskUsesFPU( void )
{
/* A task is registering the fact that it needs an FPU context. Set the
* FPU flag (which is saved as part of the task context). */
ullPortTaskHasFPUContext = pdTRUE;
/* A task is registering the fact that it needs an FPU context. Set the
FPU flag (which is saved as part of the task context). */
ullPortTaskHasFPUContext = pdTRUE;
/* Consider initialising the FPSR here - but probably not necessary in
* AArch64. */
/* Consider initialising the FPSR here - but probably not necessary in
AArch64. */
}
/*-----------------------------------------------------------*/
void vPortClearInterruptMask( UBaseType_t uxNewMaskValue )
{
if( uxNewMaskValue == pdFALSE )
{
portCLEAR_INTERRUPT_MASK();
}
if( uxNewMaskValue == pdFALSE )
{
portCLEAR_INTERRUPT_MASK();
}
}
/*-----------------------------------------------------------*/
UBaseType_t uxPortSetInterruptMask( void )
{
uint32_t ulReturn;
uint32_t ulReturn;
/* Interrupt in the CPU must be turned off while the ICCPMR is being
* updated. */
portDISABLE_INTERRUPTS();
/* Interrupt in the CPU must be turned off while the ICCPMR is being
updated. */
portDISABLE_INTERRUPTS();
if( portICCPMR_PRIORITY_MASK_REGISTER == ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) )
{
/* Interrupts were already masked. */
ulReturn = pdTRUE;
}
else
{
ulReturn = pdFALSE;
portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
__asm volatile ( "dsb sy \n"
"isb sy \n" ::: "memory" );
}
portENABLE_INTERRUPTS();
if( portICCPMR_PRIORITY_MASK_REGISTER == ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) )
{
/* Interrupts were already masked. */
ulReturn = pdTRUE;
}
else
{
ulReturn = pdFALSE;
portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
__asm volatile ( "dsb sy \n"
"isb sy \n"::: "memory" );
}
portENABLE_INTERRUPTS();
return ulReturn;
return ulReturn;
}
/*-----------------------------------------------------------*/
#if ( configASSERT_DEFINED == 1 )
#if( configASSERT_DEFINED == 1 )
void vPortValidateInterruptPriority( void )
{
/* The following assertion will fail if a service routine (ISR) for
* an interrupt that has been assigned a priority above
* configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
* function. ISR safe FreeRTOS API functions must *only* be called
* from interrupts that have been assigned a priority at or below
* configMAX_SYSCALL_INTERRUPT_PRIORITY.
*
* Numerically low interrupt priority numbers represent logically high
* interrupt priorities, therefore the priority of the interrupt must
* be set to a value equal to or numerically *higher* than
* configMAX_SYSCALL_INTERRUPT_PRIORITY.
*
* FreeRTOS maintains separate thread and ISR API functions to ensure
* interrupt entry is as fast and simple as possible. */
configASSERT( portICCRPR_RUNNING_PRIORITY_REGISTER >= ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) );
void vPortValidateInterruptPriority( void )
{
/* The following assertion will fail if a service routine (ISR) for
an interrupt that has been assigned a priority above
configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
function. ISR safe FreeRTOS API functions must *only* be called
from interrupts that have been assigned a priority at or below
configMAX_SYSCALL_INTERRUPT_PRIORITY.
/* Priority grouping: The interrupt controller (GIC) allows the bits
* that define each interrupt's priority to be split between bits that
* define the interrupt's pre-emption priority bits and bits that define
* the interrupt's sub-priority. For simplicity all bits must be defined
* to be pre-emption priority bits. The following assertion will fail if
* this is not the case (if some bits represent a sub-priority).
*
* The priority grouping is configured by the GIC's binary point register
* (ICCBPR). Writting 0 to ICCBPR will ensure it is set to its lowest
* possible value (which may be above 0). */
configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE );
}
Numerically low interrupt priority numbers represent logically high
interrupt priorities, therefore the priority of the interrupt must
be set to a value equal to or numerically *higher* than
configMAX_SYSCALL_INTERRUPT_PRIORITY.
FreeRTOS maintains separate thread and ISR API functions to ensure
interrupt entry is as fast and simple as possible. */
configASSERT( portICCRPR_RUNNING_PRIORITY_REGISTER >= ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) );
/* Priority grouping: The interrupt controller (GIC) allows the bits
that define each interrupt's priority to be split between bits that
define the interrupt's pre-emption priority bits and bits that define
the interrupt's sub-priority. For simplicity all bits must be defined
to be pre-emption priority bits. The following assertion will fail if
this is not the case (if some bits represent a sub-priority).
The priority grouping is configured by the GIC's binary point register
(ICCBPR). Writting 0 to ICCBPR will ensure it is set to its lowest
possible value (which may be above 0). */
configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE );
}
#endif /* configASSERT_DEFINED */
/*-----------------------------------------------------------*/

240
portable/GCC/ARM_CA53_64_BIT/portmacro.h
View file

@ -26,11 +26,11 @@
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,169 +43,169 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE size_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE size_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef portBASE_TYPE BaseType_t;
typedef uint64_t UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef portBASE_TYPE BaseType_t;
typedef uint64_t UBaseType_t;
typedef uint64_t TickType_t;
#define portMAX_DELAY ( ( TickType_t ) 0xffffffffffffffff )
typedef uint64_t TickType_t;
#define portMAX_DELAY ( ( TickType_t ) 0xffffffffffffffff )
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
* not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 16
#define portPOINTER_SIZE_TYPE uint64_t
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 16
#define portPOINTER_SIZE_TYPE uint64_t
/*-----------------------------------------------------------*/
/* Task utilities. */
/* Called at the end of an ISR that can cause a context switch. */
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
{ \
extern uint64_t ullPortYieldRequired; \
\
if( xSwitchRequired != pdFALSE ) \
{ \
ullPortYieldRequired = pdTRUE; \
} \
}
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
#if defined( GUEST )
#define portYIELD() __asm volatile ( "SVC 0" ::: "memory" )
#else
#define portYIELD() __asm volatile ( "SMC 0" ::: "memory" )
#endif
#define portEND_SWITCHING_ISR( xSwitchRequired )\
{ \
extern uint64_t ullPortYieldRequired; \
\
if( xSwitchRequired != pdFALSE ) \
{ \
ullPortYieldRequired = pdTRUE; \
} \
}
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
#if defined( GUEST )
#define portYIELD() __asm volatile ( "SVC 0" ::: "memory" )
#else
#define portYIELD() __asm volatile ( "SMC 0" ::: "memory" )
#endif
/*-----------------------------------------------------------
* Critical section control
*----------------------------------------------------------*/
* Critical section control
*----------------------------------------------------------*/
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern UBaseType_t uxPortSetInterruptMask( void );
extern void vPortClearInterruptMask( UBaseType_t uxNewMaskValue );
extern void vPortInstallFreeRTOSVectorTable( void );
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern UBaseType_t uxPortSetInterruptMask( void );
extern void vPortClearInterruptMask( UBaseType_t uxNewMaskValue );
extern void vPortInstallFreeRTOSVectorTable( void );
#define portDISABLE_INTERRUPTS() \
__asm volatile ( "MSR DAIFSET, #2" ::: "memory" ); \
__asm volatile ( "DSB SY" ); \
__asm volatile ( "ISB SY" );
#define portDISABLE_INTERRUPTS() \
__asm volatile ( "MSR DAIFSET, #2" ::: "memory" ); \
__asm volatile ( "DSB SY" ); \
__asm volatile ( "ISB SY" );
#define portENABLE_INTERRUPTS() \
__asm volatile ( "MSR DAIFCLR, #2" ::: "memory" ); \
__asm volatile ( "DSB SY" ); \
__asm volatile ( "ISB SY" );
#define portENABLE_INTERRUPTS() \
__asm volatile ( "MSR DAIFCLR, #2" ::: "memory" ); \
__asm volatile ( "DSB SY" ); \
__asm volatile ( "ISB SY" );
/* These macros do not globally disable/enable interrupts. They do mask off
* interrupts that have a priority below configMAX_API_CALL_INTERRUPT_PRIORITY. */
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
#define portSET_INTERRUPT_MASK_FROM_ISR() uxPortSetInterruptMask()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) vPortClearInterruptMask( x )
interrupts that have a priority below configMAX_API_CALL_INTERRUPT_PRIORITY. */
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
#define portSET_INTERRUPT_MASK_FROM_ISR() uxPortSetInterruptMask()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortClearInterruptMask(x)
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. These are
* not required for this port but included in case common demo code that uses these
* macros is used. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
not required for this port but included in case common demo code that uses these
macros is used. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
/* Prototype of the FreeRTOS tick handler. This must be installed as the
* handler for whichever peripheral is used to generate the RTOS tick. */
void FreeRTOS_Tick_Handler( void );
handler for whichever peripheral is used to generate the RTOS tick. */
void FreeRTOS_Tick_Handler( void );
/* Any task that uses the floating point unit MUST call vPortTaskUsesFPU()
* before any floating point instructions are executed. */
void vPortTaskUsesFPU( void );
#define portTASK_USES_FLOATING_POINT() vPortTaskUsesFPU()
before any floating point instructions are executed. */
void vPortTaskUsesFPU( void );
#define portTASK_USES_FLOATING_POINT() vPortTaskUsesFPU()
#define portLOWEST_INTERRUPT_PRIORITY ( ( ( uint32_t ) configUNIQUE_INTERRUPT_PRIORITIES ) - 1UL )
#define portLOWEST_USABLE_INTERRUPT_PRIORITY ( portLOWEST_INTERRUPT_PRIORITY - 1UL )
#define portLOWEST_INTERRUPT_PRIORITY ( ( ( uint32_t ) configUNIQUE_INTERRUPT_PRIORITIES ) - 1UL )
#define portLOWEST_USABLE_INTERRUPT_PRIORITY ( portLOWEST_INTERRUPT_PRIORITY - 1UL )
/* Architecture specific optimisations. */
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/*-----------------------------------------------------------*/
/*-----------------------------------------------------------*/
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __builtin_clz( uxReadyPriorities ) )
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __builtin_clz( uxReadyPriorities ) )
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
#ifdef configASSERT
void vPortValidateInterruptPriority( void );
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority()
#endif /* configASSERT */
#ifdef configASSERT
void vPortValidateInterruptPriority( void );
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority()
#endif /* configASSERT */
#define portNOP() __asm volatile ( "NOP" )
#define portINLINE __inline
#define portNOP() __asm volatile( "NOP" )
#define portINLINE __inline
#ifdef __cplusplus
} /* extern C */
#endif
#ifdef __cplusplus
} /* extern C */
#endif
/* The number of bits to shift for an interrupt priority is dependent on the
* number of bits implemented by the interrupt controller. */
#if configUNIQUE_INTERRUPT_PRIORITIES == 16
#define portPRIORITY_SHIFT 4
#define portMAX_BINARY_POINT_VALUE 3
#elif configUNIQUE_INTERRUPT_PRIORITIES == 32
#define portPRIORITY_SHIFT 3
#define portMAX_BINARY_POINT_VALUE 2
#elif configUNIQUE_INTERRUPT_PRIORITIES == 64
#define portPRIORITY_SHIFT 2
#define portMAX_BINARY_POINT_VALUE 1
#elif configUNIQUE_INTERRUPT_PRIORITIES == 128
#define portPRIORITY_SHIFT 1
#define portMAX_BINARY_POINT_VALUE 0
#elif configUNIQUE_INTERRUPT_PRIORITIES == 256
#define portPRIORITY_SHIFT 0
#define portMAX_BINARY_POINT_VALUE 0
#else /* if configUNIQUE_INTERRUPT_PRIORITIES == 16 */
#error Invalid configUNIQUE_INTERRUPT_PRIORITIES setting. configUNIQUE_INTERRUPT_PRIORITIES must be set to the number of unique priorities implemented by the target hardware
#endif /* if configUNIQUE_INTERRUPT_PRIORITIES == 16 */
number of bits implemented by the interrupt controller. */
#if configUNIQUE_INTERRUPT_PRIORITIES == 16
#define portPRIORITY_SHIFT 4
#define portMAX_BINARY_POINT_VALUE 3
#elif configUNIQUE_INTERRUPT_PRIORITIES == 32
#define portPRIORITY_SHIFT 3
#define portMAX_BINARY_POINT_VALUE 2
#elif configUNIQUE_INTERRUPT_PRIORITIES == 64
#define portPRIORITY_SHIFT 2
#define portMAX_BINARY_POINT_VALUE 1
#elif configUNIQUE_INTERRUPT_PRIORITIES == 128
#define portPRIORITY_SHIFT 1
#define portMAX_BINARY_POINT_VALUE 0
#elif configUNIQUE_INTERRUPT_PRIORITIES == 256
#define portPRIORITY_SHIFT 0
#define portMAX_BINARY_POINT_VALUE 0
#else
#error Invalid configUNIQUE_INTERRUPT_PRIORITIES setting. configUNIQUE_INTERRUPT_PRIORITIES must be set to the number of unique priorities implemented by the target hardware
#endif
/* Interrupt controller access addresses. */
#define portICCPMR_PRIORITY_MASK_OFFSET ( 0x04 )
#define portICCIAR_INTERRUPT_ACKNOWLEDGE_OFFSET ( 0x0C )
#define portICCEOIR_END_OF_INTERRUPT_OFFSET ( 0x10 )
#define portICCBPR_BINARY_POINT_OFFSET ( 0x08 )
#define portICCRPR_RUNNING_PRIORITY_OFFSET ( 0x14 )
#define portICCPMR_PRIORITY_MASK_OFFSET ( 0x04 )
#define portICCIAR_INTERRUPT_ACKNOWLEDGE_OFFSET ( 0x0C )
#define portICCEOIR_END_OF_INTERRUPT_OFFSET ( 0x10 )
#define portICCBPR_BINARY_POINT_OFFSET ( 0x08 )
#define portICCRPR_RUNNING_PRIORITY_OFFSET ( 0x14 )
#define portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET )
#define portICCPMR_PRIORITY_MASK_REGISTER ( *( ( volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCPMR_PRIORITY_MASK_OFFSET ) ) )
#define portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCIAR_INTERRUPT_ACKNOWLEDGE_OFFSET )
#define portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCEOIR_END_OF_INTERRUPT_OFFSET )
#define portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCPMR_PRIORITY_MASK_OFFSET )
#define portICCBPR_BINARY_POINT_REGISTER ( *( ( const volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCBPR_BINARY_POINT_OFFSET ) ) )
#define portICCRPR_RUNNING_PRIORITY_REGISTER ( *( ( const volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCRPR_RUNNING_PRIORITY_OFFSET ) ) )
#define portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET )
#define portICCPMR_PRIORITY_MASK_REGISTER ( *( ( volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCPMR_PRIORITY_MASK_OFFSET ) ) )
#define portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCIAR_INTERRUPT_ACKNOWLEDGE_OFFSET )
#define portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCEOIR_END_OF_INTERRUPT_OFFSET )
#define portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCPMR_PRIORITY_MASK_OFFSET )
#define portICCBPR_BINARY_POINT_REGISTER ( *( ( const volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCBPR_BINARY_POINT_OFFSET ) ) )
#define portICCRPR_RUNNING_PRIORITY_REGISTER ( *( ( const volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCRPR_RUNNING_PRIORITY_OFFSET ) ) )
#define portMEMORY_BARRIER() __asm volatile ( "" ::: "memory" )
#define portMEMORY_BARRIER() __asm volatile( "" ::: "memory" )
#endif /* PORTMACRO_H */

667
portable/GCC/ARM_CA9/port.c
View file

@ -33,123 +33,123 @@
#include "task.h"
#ifndef configINTERRUPT_CONTROLLER_BASE_ADDRESS
#error configINTERRUPT_CONTROLLER_BASE_ADDRESS must be defined. See http: /*www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html */
#error configINTERRUPT_CONTROLLER_BASE_ADDRESS must be defined. See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
#endif
#ifndef configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET
#error configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET must be defined. See http: /*www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html */
#error configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET must be defined. See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
#endif
#ifndef configUNIQUE_INTERRUPT_PRIORITIES
#error configUNIQUE_INTERRUPT_PRIORITIES must be defined. See http: /*www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html */
#error configUNIQUE_INTERRUPT_PRIORITIES must be defined. See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
#endif
#ifndef configSETUP_TICK_INTERRUPT
#error configSETUP_TICK_INTERRUPT() must be defined. See http: /*www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html */
#error configSETUP_TICK_INTERRUPT() must be defined. See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
#endif /* configSETUP_TICK_INTERRUPT */
#ifndef configMAX_API_CALL_INTERRUPT_PRIORITY
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be defined. See http: /*www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html */
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be defined. See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
#endif
#if configMAX_API_CALL_INTERRUPT_PRIORITY == 0
#error configMAX_API_CALL_INTERRUPT_PRIORITY must not be set to 0
#error configMAX_API_CALL_INTERRUPT_PRIORITY must not be set to 0
#endif
#if configMAX_API_CALL_INTERRUPT_PRIORITY > configUNIQUE_INTERRUPT_PRIORITIES
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be less than or equal to configUNIQUE_INTERRUPT_PRIORITIES as the lower the numeric priority value the higher the logical interrupt priority
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be less than or equal to configUNIQUE_INTERRUPT_PRIORITIES as the lower the numeric priority value the higher the logical interrupt priority
#endif
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
/* Check the configuration. */
#if ( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
/* Check the configuration. */
#if( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
/* In case security extensions are implemented. */
#if configMAX_API_CALL_INTERRUPT_PRIORITY <= ( configUNIQUE_INTERRUPT_PRIORITIES / 2 )
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be greater than ( configUNIQUE_INTERRUPT_PRIORITIES / 2 )
#error configMAX_API_CALL_INTERRUPT_PRIORITY must be greater than ( configUNIQUE_INTERRUPT_PRIORITIES / 2 )
#endif
/* Some vendor specific files default configCLEAR_TICK_INTERRUPT() in
* portmacro.h. */
portmacro.h. */
#ifndef configCLEAR_TICK_INTERRUPT
#define configCLEAR_TICK_INTERRUPT()
#define configCLEAR_TICK_INTERRUPT()
#endif
/* A critical section is exited when the critical section nesting count reaches
* this value. */
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
this value. */
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
/* In all GICs 255 can be written to the priority mask register to unmask all
* (but the lowest) interrupt priority. */
#define portUNMASK_VALUE ( 0xFFUL )
(but the lowest) interrupt priority. */
#define portUNMASK_VALUE ( 0xFFUL )
/* Tasks are not created with a floating point context, but can be given a
* floating point context after they have been created. A variable is stored as
* part of the tasks context that holds portNO_FLOATING_POINT_CONTEXT if the task
* does not have an FPU context, or any other value if the task does have an FPU
* context. */
#define portNO_FLOATING_POINT_CONTEXT ( ( StackType_t ) 0 )
floating point context after they have been created. A variable is stored as
part of the tasks context that holds portNO_FLOATING_POINT_CONTEXT if the task
does not have an FPU context, or any other value if the task does have an FPU
context. */
#define portNO_FLOATING_POINT_CONTEXT ( ( StackType_t ) 0 )
/* Constants required to setup the initial task context. */
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, IRQ enabled FIQ enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINTERRUPT_ENABLE_BIT ( 0x80UL )
#define portTHUMB_MODE_ADDRESS ( 0x01UL )
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, IRQ enabled FIQ enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portINTERRUPT_ENABLE_BIT ( 0x80UL )
#define portTHUMB_MODE_ADDRESS ( 0x01UL )
/* Used by portASSERT_IF_INTERRUPT_PRIORITY_INVALID() when ensuring the binary
* point is zero. */
#define portBINARY_POINT_BITS ( ( uint8_t ) 0x03 )
point is zero. */
#define portBINARY_POINT_BITS ( ( uint8_t ) 0x03 )
/* Masks all bits in the APSR other than the mode bits. */
#define portAPSR_MODE_BITS_MASK ( 0x1F )
#define portAPSR_MODE_BITS_MASK ( 0x1F )
/* The value of the mode bits in the APSR when the CPU is executing in user
* mode. */
#define portAPSR_USER_MODE ( 0x10 )
mode. */
#define portAPSR_USER_MODE ( 0x10 )
/* The critical section macros only mask interrupts up to an application
* determined priority level. Sometimes it is necessary to turn interrupt off in
* the CPU itself before modifying certain hardware registers. */
#define portCPU_IRQ_DISABLE() \
__asm volatile ( "CPSID i" ::: "memory" ); \
__asm volatile ( "DSB" ); \
__asm volatile ( "ISB" );
determined priority level. Sometimes it is necessary to turn interrupt off in
the CPU itself before modifying certain hardware registers. */
#define portCPU_IRQ_DISABLE() \
__asm volatile ( "CPSID i" ::: "memory" ); \
__asm volatile ( "DSB" ); \
__asm volatile ( "ISB" );
#define portCPU_IRQ_ENABLE() \
__asm volatile ( "CPSIE i" ::: "memory" ); \
__asm volatile ( "DSB" ); \
__asm volatile ( "ISB" );
#define portCPU_IRQ_ENABLE() \
__asm volatile ( "CPSIE i" ::: "memory" ); \
__asm volatile ( "DSB" ); \
__asm volatile ( "ISB" );
/* Macro to unmask all interrupt priorities. */
#define portCLEAR_INTERRUPT_MASK() \
{ \
portCPU_IRQ_DISABLE(); \
portICCPMR_PRIORITY_MASK_REGISTER = portUNMASK_VALUE; \
__asm volatile ( "DSB \n" \
"ISB \n"); \
portCPU_IRQ_ENABLE(); \
}
#define portCLEAR_INTERRUPT_MASK() \
{ \
portCPU_IRQ_DISABLE(); \
portICCPMR_PRIORITY_MASK_REGISTER = portUNMASK_VALUE; \
__asm volatile ( "DSB \n" \
"ISB \n" ); \
portCPU_IRQ_ENABLE(); \
}
#define portINTERRUPT_PRIORITY_REGISTER_OFFSET 0x400UL
#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff )
#define portBIT_0_SET ( ( uint8_t ) 0x01 )
#define portINTERRUPT_PRIORITY_REGISTER_OFFSET 0x400UL
#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff )
#define portBIT_0_SET ( ( uint8_t ) 0x01 )
/* Let the user override the pre-loading of the initial LR with the address of
* prvTaskExitError() in case it messes up unwinding of the stack in the
* debugger. */
prvTaskExitError() in case it messes up unwinding of the stack in the
debugger. */
#ifdef configTASK_RETURN_ADDRESS
#define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS
#define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS
#else
#define portTASK_RETURN_ADDRESS prvTaskExitError
#define portTASK_RETURN_ADDRESS prvTaskExitError
#endif
/* The space on the stack required to hold the FPU registers. This is 32 64-bit
* registers, plus a 32-bit status register. */
#define portFPU_REGISTER_WORDS ( ( 32 * 2 ) + 1 )
registers, plus a 32-bit status register. */
#define portFPU_REGISTER_WORDS ( ( 32 * 2 ) + 1 )
/*-----------------------------------------------------------*/
@ -183,393 +183,386 @@ static void prvTaskExitError( void );
* FPU registers to be saved on interrupt entry their IRQ handler must be
* called vApplicationIRQHandler().
*/
void vApplicationFPUSafeIRQHandler( uint32_t ulICCIAR ) __attribute__( ( weak ) );
void vApplicationFPUSafeIRQHandler( uint32_t ulICCIAR ) __attribute__((weak) );
/*-----------------------------------------------------------*/
/* A variable is used to keep track of the critical section nesting. This
* variable has to be stored as part of the task context and must be initialised to
* a non zero value to ensure interrupts don't inadvertently become unmasked before
* the scheduler starts. As it is stored as part of the task context it will
* automatically be set to 0 when the first task is started. */
variable has to be stored as part of the task context and must be initialised to
a non zero value to ensure interrupts don't inadvertently become unmasked before
the scheduler starts. As it is stored as part of the task context it will
automatically be set to 0 when the first task is started. */
volatile uint32_t ulCriticalNesting = 9999UL;
/* Saved as part of the task context. If ulPortTaskHasFPUContext is non-zero then
* a floating point context must be saved and restored for the task. */
a floating point context must be saved and restored for the task. */
volatile uint32_t ulPortTaskHasFPUContext = pdFALSE;
/* Set to 1 to pend a context switch from an ISR. */
volatile uint32_t ulPortYieldRequired = pdFALSE;
/* Counts the interrupt nesting depth. A context switch is only performed if
* if the nesting depth is 0. */
if the nesting depth is 0. */
volatile uint32_t ulPortInterruptNesting = 0UL;
/* Used in the asm file. */
__attribute__( ( used ) ) const uint32_t ulICCIAR = portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS;
__attribute__( ( used ) ) const uint32_t ulICCEOIR = portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS;
__attribute__( ( used ) ) const uint32_t ulICCPMR = portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS;
__attribute__( ( used ) ) const uint32_t ulMaxAPIPriorityMask = ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
__attribute__(( used )) const uint32_t ulICCIAR = portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS;
__attribute__(( used )) const uint32_t ulICCEOIR = portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS;
__attribute__(( used )) const uint32_t ulICCPMR = portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS;
__attribute__(( used )) const uint32_t ulMaxAPIPriorityMask = ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
/*-----------------------------------------------------------*/
/*
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro.
*
* The fist real value on the stack is the status register, which is set for
* system mode, with interrupts enabled. A few NULLs are added first to ensure
* GDB does not try decoding a non-existent return address. */
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro.
if( ( ( uint32_t ) pxCode & portTHUMB_MODE_ADDRESS ) != 0x00UL )
{
/* The task will start in THUMB mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
The fist real value on the stack is the status register, which is set for
system mode, with interrupts enabled. A few NULLs are added first to ensure
GDB does not try decoding a non-existent return address. */
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
pxTopOfStack--;
if( ( ( uint32_t ) pxCode & portTHUMB_MODE_ADDRESS ) != 0x00UL )
{
/* The task will start in THUMB mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
/* Next the return address, which in this case is the start of the task. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
pxTopOfStack--;
/* Next all the registers other than the stack pointer. */
*pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* Next the return address, which in this case is the start of the task. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
/* The task will start with a critical nesting count of 0 as interrupts are
* enabled. */
*pxTopOfStack = portNO_CRITICAL_NESTING;
/* Next all the registers other than the stack pointer. */
*pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
#if ( configUSE_TASK_FPU_SUPPORT == 1 )
{
/* The task will start without a floating point context. A task that
* uses the floating point hardware must call vPortTaskUsesFPU() before
* executing any floating point instructions. */
pxTopOfStack--;
*pxTopOfStack = portNO_FLOATING_POINT_CONTEXT;
}
#elif ( configUSE_TASK_FPU_SUPPORT == 2 )
{
/* The task will start with a floating point context. Leave enough
* space for the registers - and ensure they are initialised to 0. */
pxTopOfStack -= portFPU_REGISTER_WORDS;
memset( pxTopOfStack, 0x00, portFPU_REGISTER_WORDS * sizeof( StackType_t ) );
/* The task will start with a critical nesting count of 0 as interrupts are
enabled. */
*pxTopOfStack = portNO_CRITICAL_NESTING;
pxTopOfStack--;
*pxTopOfStack = pdTRUE;
ulPortTaskHasFPUContext = pdTRUE;
}
#else /* if ( configUSE_TASK_FPU_SUPPORT == 1 ) */
{
#error Invalid configUSE_TASK_FPU_SUPPORT setting - configUSE_TASK_FPU_SUPPORT must be set to 1, 2, or left undefined.
}
#endif /* if ( configUSE_TASK_FPU_SUPPORT == 1 ) */
#if( configUSE_TASK_FPU_SUPPORT == 1 )
{
/* The task will start without a floating point context. A task that
uses the floating point hardware must call vPortTaskUsesFPU() before
executing any floating point instructions. */
pxTopOfStack--;
*pxTopOfStack = portNO_FLOATING_POINT_CONTEXT;
}
#elif( configUSE_TASK_FPU_SUPPORT == 2 )
{
/* The task will start with a floating point context. Leave enough
space for the registers - and ensure they are initialised to 0. */
pxTopOfStack -= portFPU_REGISTER_WORDS;
memset( pxTopOfStack, 0x00, portFPU_REGISTER_WORDS * sizeof( StackType_t ) );
return pxTopOfStack;
pxTopOfStack--;
*pxTopOfStack = pdTRUE;
ulPortTaskHasFPUContext = pdTRUE;
}
#else
{
#error Invalid configUSE_TASK_FPU_SUPPORT setting - configUSE_TASK_FPU_SUPPORT must be set to 1, 2, or left undefined.
}
#endif
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
static void prvTaskExitError( void )
{
/* A function that implements a task must not exit or attempt to return to
* its caller as there is nothing to return to. If a task wants to exit it
* should instead call vTaskDelete( NULL ).
*
* Artificially force an assert() to be triggered if configASSERT() is
* defined, then stop here so application writers can catch the error. */
configASSERT( ulPortInterruptNesting == ~0UL );
portDISABLE_INTERRUPTS();
/* A function that implements a task must not exit or attempt to return to
its caller as there is nothing to return to. If a task wants to exit it
should instead call vTaskDelete( NULL ).
for( ; ; )
{
}
Artificially force an assert() to be triggered if configASSERT() is
defined, then stop here so application writers can catch the error. */
configASSERT( ulPortInterruptNesting == ~0UL );
portDISABLE_INTERRUPTS();
for( ;; );
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
uint32_t ulAPSR;
uint32_t ulAPSR;
#if ( configASSERT_DEFINED == 1 )
{
volatile uint32_t ulOriginalPriority;
volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + portINTERRUPT_PRIORITY_REGISTER_OFFSET );
volatile uint8_t ucMaxPriorityValue;
#if( configASSERT_DEFINED == 1 )
{
volatile uint32_t ulOriginalPriority;
volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + portINTERRUPT_PRIORITY_REGISTER_OFFSET );
volatile uint8_t ucMaxPriorityValue;
/* Determine how many priority bits are implemented in the GIC.
*
* Save the interrupt priority value that is about to be clobbered. */
ulOriginalPriority = *pucFirstUserPriorityRegister;
/* Determine how many priority bits are implemented in the GIC.
/* Determine the number of priority bits available. First write to
* all possible bits. */
*pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;
Save the interrupt priority value that is about to be clobbered. */
ulOriginalPriority = *pucFirstUserPriorityRegister;
/* Read the value back to see how many bits stuck. */
ucMaxPriorityValue = *pucFirstUserPriorityRegister;
/* Determine the number of priority bits available. First write to
all possible bits. */
*pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;
/* Shift to the least significant bits. */
while( ( ucMaxPriorityValue & portBIT_0_SET ) != portBIT_0_SET )
{
ucMaxPriorityValue >>= ( uint8_t ) 0x01;
}
/* Read the value back to see how many bits stuck. */
ucMaxPriorityValue = *pucFirstUserPriorityRegister;
/* Sanity check configUNIQUE_INTERRUPT_PRIORITIES matches the read
* value. */
configASSERT( ucMaxPriorityValue == portLOWEST_INTERRUPT_PRIORITY );
/* Shift to the least significant bits. */
while( ( ucMaxPriorityValue & portBIT_0_SET ) != portBIT_0_SET )
{
ucMaxPriorityValue >>= ( uint8_t ) 0x01;
}
/* Restore the clobbered interrupt priority register to its original
* value. */
*pucFirstUserPriorityRegister = ulOriginalPriority;
}
#endif /* conifgASSERT_DEFINED */
/* Sanity check configUNIQUE_INTERRUPT_PRIORITIES matches the read
value. */
configASSERT( ucMaxPriorityValue == portLOWEST_INTERRUPT_PRIORITY );
/* Restore the clobbered interrupt priority register to its original
value. */
*pucFirstUserPriorityRegister = ulOriginalPriority;
}
#endif /* conifgASSERT_DEFINED */
/* Only continue if the CPU is not in User mode. The CPU must be in a
* Privileged mode for the scheduler to start. */
__asm volatile ( "MRS %0, APSR" : "=r" ( ulAPSR )::"memory" );
ulAPSR &= portAPSR_MODE_BITS_MASK;
configASSERT( ulAPSR != portAPSR_USER_MODE );
/* Only continue if the CPU is not in User mode. The CPU must be in a
Privileged mode for the scheduler to start. */
__asm volatile ( "MRS %0, APSR" : "=r" ( ulAPSR ) :: "memory" );
ulAPSR &= portAPSR_MODE_BITS_MASK;
configASSERT( ulAPSR != portAPSR_USER_MODE );
if( ulAPSR != portAPSR_USER_MODE )
{
/* Only continue if the binary point value is set to its lowest possible
* setting. See the comments in vPortValidateInterruptPriority() below for
* more information. */
configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE );
if( ulAPSR != portAPSR_USER_MODE )
{
/* Only continue if the binary point value is set to its lowest possible
setting. See the comments in vPortValidateInterruptPriority() below for
more information. */
configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE );
if( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE )
{
/* Interrupts are turned off in the CPU itself to ensure tick does
* not execute while the scheduler is being started. Interrupts are
* automatically turned back on in the CPU when the first task starts
* executing. */
portCPU_IRQ_DISABLE();
if( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE )
{
/* Interrupts are turned off in the CPU itself to ensure tick does
not execute while the scheduler is being started. Interrupts are
automatically turned back on in the CPU when the first task starts
executing. */
portCPU_IRQ_DISABLE();
/* Start the timer that generates the tick ISR. */
configSETUP_TICK_INTERRUPT();
/* Start the timer that generates the tick ISR. */
configSETUP_TICK_INTERRUPT();
/* Start the first task executing. */
vPortRestoreTaskContext();
}
}
/* Start the first task executing. */
vPortRestoreTaskContext();
}
}
/* Will only get here if vTaskStartScheduler() was called with the CPU in
* a non-privileged mode or the binary point register was not set to its lowest
* possible value. prvTaskExitError() is referenced to prevent a compiler
* warning about it being defined but not referenced in the case that the user
* defines their own exit address. */
( void ) prvTaskExitError;
return 0;
/* Will only get here if vTaskStartScheduler() was called with the CPU in
a non-privileged mode or the binary point register was not set to its lowest
possible value. prvTaskExitError() is referenced to prevent a compiler
warning about it being defined but not referenced in the case that the user
defines their own exit address. */
( void ) prvTaskExitError;
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* Not implemented in ports where there is nothing to return to.
* Artificially force an assert. */
configASSERT( ulCriticalNesting == 1000UL );
/* Not implemented in ports where there is nothing to return to.
Artificially force an assert. */
configASSERT( ulCriticalNesting == 1000UL );
}
/*-----------------------------------------------------------*/
void vPortEnterCritical( void )
{
/* Mask interrupts up to the max syscall interrupt priority. */
ulPortSetInterruptMask();
/* Mask interrupts up to the max syscall interrupt priority. */
ulPortSetInterruptMask();
/* Now interrupts are disabled ulCriticalNesting can be accessed
* directly. Increment ulCriticalNesting to keep a count of how many times
* portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* Now interrupts are disabled ulCriticalNesting can be accessed
directly. Increment ulCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* This is not the interrupt safe version of the enter critical function so
* assert() if it is being called from an interrupt context. Only API
* functions that end in "FromISR" can be used in an interrupt. Only assert if
* the critical nesting count is 1 to protect against recursive calls if the
* assert function also uses a critical section. */
if( ulCriticalNesting == 1 )
{
configASSERT( ulPortInterruptNesting == 0 );
}
/* This is not the interrupt safe version of the enter critical function so
assert() if it is being called from an interrupt context. Only API
functions that end in "FromISR" can be used in an interrupt. Only assert if
the critical nesting count is 1 to protect against recursive calls if the
assert function also uses a critical section. */
if( ulCriticalNesting == 1 )
{
configASSERT( ulPortInterruptNesting == 0 );
}
}
/*-----------------------------------------------------------*/
void vPortExitCritical( void )
{
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as the critical section is being
* exited. */
ulCriticalNesting--;
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as the critical section is being
exited. */
ulCriticalNesting--;
/* If the nesting level has reached zero then all interrupt
* priorities must be re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Critical nesting has reached zero so all interrupt priorities
* should be unmasked. */
portCLEAR_INTERRUPT_MASK();
}
}
/* If the nesting level has reached zero then all interrupt
priorities must be re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Critical nesting has reached zero so all interrupt priorities
should be unmasked. */
portCLEAR_INTERRUPT_MASK();
}
}
}
/*-----------------------------------------------------------*/
void FreeRTOS_Tick_Handler( void )
{
/* Set interrupt mask before altering scheduler structures. The tick
* handler runs at the lowest priority, so interrupts cannot already be masked,
* so there is no need to save and restore the current mask value. It is
* necessary to turn off interrupts in the CPU itself while the ICCPMR is being
* updated. */
portCPU_IRQ_DISABLE();
portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
__asm volatile ( "dsb \n"
"isb \n"::: "memory" );
portCPU_IRQ_ENABLE();
/* Set interrupt mask before altering scheduler structures. The tick
handler runs at the lowest priority, so interrupts cannot already be masked,
so there is no need to save and restore the current mask value. It is
necessary to turn off interrupts in the CPU itself while the ICCPMR is being
updated. */
portCPU_IRQ_DISABLE();
portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
__asm volatile ( "dsb \n"
"isb \n" ::: "memory" );
portCPU_IRQ_ENABLE();
/* Increment the RTOS tick. */
if( xTaskIncrementTick() != pdFALSE )
{
ulPortYieldRequired = pdTRUE;
}
/* Increment the RTOS tick. */
if( xTaskIncrementTick() != pdFALSE )
{
ulPortYieldRequired = pdTRUE;
}
/* Ensure all interrupt priorities are active again. */
portCLEAR_INTERRUPT_MASK();
configCLEAR_TICK_INTERRUPT();
/* Ensure all interrupt priorities are active again. */
portCLEAR_INTERRUPT_MASK();
configCLEAR_TICK_INTERRUPT();
}
/*-----------------------------------------------------------*/
#if ( configUSE_TASK_FPU_SUPPORT != 2 )
#if( configUSE_TASK_FPU_SUPPORT != 2 )
void vPortTaskUsesFPU( void )
{
uint32_t ulInitialFPSCR = 0;
void vPortTaskUsesFPU( void )
{
uint32_t ulInitialFPSCR = 0;
/* A task is registering the fact that it needs an FPU context. Set the
* FPU flag (which is saved as part of the task context). */
ulPortTaskHasFPUContext = pdTRUE;
/* A task is registering the fact that it needs an FPU context. Set the
FPU flag (which is saved as part of the task context). */
ulPortTaskHasFPUContext = pdTRUE;
/* Initialise the floating point status register. */
__asm volatile ( "FMXR FPSCR, %0" ::"r" ( ulInitialFPSCR ) : "memory" );
}
/* Initialise the floating point status register. */
__asm volatile ( "FMXR FPSCR, %0" :: "r" (ulInitialFPSCR) : "memory" );
}
#endif /* configUSE_TASK_FPU_SUPPORT */
/*-----------------------------------------------------------*/
void vPortClearInterruptMask( uint32_t ulNewMaskValue )
{
if( ulNewMaskValue == pdFALSE )
{
portCLEAR_INTERRUPT_MASK();
}
if( ulNewMaskValue == pdFALSE )
{
portCLEAR_INTERRUPT_MASK();
}
}
/*-----------------------------------------------------------*/
uint32_t ulPortSetInterruptMask( void )
{
uint32_t ulReturn;
uint32_t ulReturn;
/* Interrupt in the CPU must be turned off while the ICCPMR is being
* updated. */
portCPU_IRQ_DISABLE();
/* Interrupt in the CPU must be turned off while the ICCPMR is being
updated. */
portCPU_IRQ_DISABLE();
if( portICCPMR_PRIORITY_MASK_REGISTER == ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) )
{
/* Interrupts were already masked. */
ulReturn = pdTRUE;
}
else
{
ulReturn = pdFALSE;
portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
__asm volatile ( "dsb \n"
"isb \n" ::: "memory" );
}
portCPU_IRQ_ENABLE();
if( portICCPMR_PRIORITY_MASK_REGISTER == ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) )
{
/* Interrupts were already masked. */
ulReturn = pdTRUE;
}
else
{
ulReturn = pdFALSE;
portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
__asm volatile ( "dsb \n"
"isb \n"::: "memory" );
}
portCPU_IRQ_ENABLE();
return ulReturn;
return ulReturn;
}
/*-----------------------------------------------------------*/
#if ( configASSERT_DEFINED == 1 )
#if( configASSERT_DEFINED == 1 )
void vPortValidateInterruptPriority( void )
{
/* The following assertion will fail if a service routine (ISR) for
* an interrupt that has been assigned a priority above
* configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
* function. ISR safe FreeRTOS API functions must *only* be called
* from interrupts that have been assigned a priority at or below
* configMAX_SYSCALL_INTERRUPT_PRIORITY.
*
* Numerically low interrupt priority numbers represent logically high
* interrupt priorities, therefore the priority of the interrupt must
* be set to a value equal to or numerically *higher* than
* configMAX_SYSCALL_INTERRUPT_PRIORITY.
*
* FreeRTOS maintains separate thread and ISR API functions to ensure
* interrupt entry is as fast and simple as possible. */
configASSERT( portICCRPR_RUNNING_PRIORITY_REGISTER >= ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) );
void vPortValidateInterruptPriority( void )
{
/* The following assertion will fail if a service routine (ISR) for
an interrupt that has been assigned a priority above
configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
function. ISR safe FreeRTOS API functions must *only* be called
from interrupts that have been assigned a priority at or below
configMAX_SYSCALL_INTERRUPT_PRIORITY.
/* Priority grouping: The interrupt controller (GIC) allows the bits
* that define each interrupt's priority to be split between bits that
* define the interrupt's pre-emption priority bits and bits that define
* the interrupt's sub-priority. For simplicity all bits must be defined
* to be pre-emption priority bits. The following assertion will fail if
* this is not the case (if some bits represent a sub-priority).
*
* The priority grouping is configured by the GIC's binary point register
* (ICCBPR). Writting 0 to ICCBPR will ensure it is set to its lowest
* possible value (which may be above 0). */
configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE );
}
Numerically low interrupt priority numbers represent logically high
interrupt priorities, therefore the priority of the interrupt must
be set to a value equal to or numerically *higher* than
configMAX_SYSCALL_INTERRUPT_PRIORITY.
FreeRTOS maintains separate thread and ISR API functions to ensure
interrupt entry is as fast and simple as possible. */
configASSERT( portICCRPR_RUNNING_PRIORITY_REGISTER >= ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) );
/* Priority grouping: The interrupt controller (GIC) allows the bits
that define each interrupt's priority to be split between bits that
define the interrupt's pre-emption priority bits and bits that define
the interrupt's sub-priority. For simplicity all bits must be defined
to be pre-emption priority bits. The following assertion will fail if
this is not the case (if some bits represent a sub-priority).
The priority grouping is configured by the GIC's binary point register
(ICCBPR). Writting 0 to ICCBPR will ensure it is set to its lowest
possible value (which may be above 0). */
configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE );
}
#endif /* configASSERT_DEFINED */
/*-----------------------------------------------------------*/
void vApplicationFPUSafeIRQHandler( uint32_t ulICCIAR )
{
( void ) ulICCIAR;
configASSERT( ( volatile void * ) NULL );
( void ) ulICCIAR;
configASSERT( ( volatile void * ) NULL );
}

236
portable/GCC/ARM_CA9/portmacro.h
View file

@ -26,11 +26,11 @@
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,166 +43,166 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
* not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
/*-----------------------------------------------------------*/
/* Task utilities. */
/* Called at the end of an ISR that can cause a context switch. */
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
{ \
extern uint32_t ulPortYieldRequired; \
\
if( xSwitchRequired != pdFALSE ) \
{ \
ulPortYieldRequired = pdTRUE; \
} \
}
#define portEND_SWITCHING_ISR( xSwitchRequired )\
{ \
extern uint32_t ulPortYieldRequired; \
\
if( xSwitchRequired != pdFALSE ) \
{ \
ulPortYieldRequired = pdTRUE; \
} \
}
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
#define portYIELD() __asm volatile ( "SWI 0" ::: "memory" );
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
#define portYIELD() __asm volatile ( "SWI 0" ::: "memory" );
/*-----------------------------------------------------------
* Critical section control
*----------------------------------------------------------*/
* Critical section control
*----------------------------------------------------------*/
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern uint32_t ulPortSetInterruptMask( void );
extern void vPortClearInterruptMask( uint32_t ulNewMaskValue );
extern void vPortInstallFreeRTOSVectorTable( void );
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern uint32_t ulPortSetInterruptMask( void );
extern void vPortClearInterruptMask( uint32_t ulNewMaskValue );
extern void vPortInstallFreeRTOSVectorTable( void );
/* These macros do not globally disable/enable interrupts. They do mask off
* interrupts that have a priority below configMAX_API_CALL_INTERRUPT_PRIORITY. */
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
#define portDISABLE_INTERRUPTS() ulPortSetInterruptMask()
#define portENABLE_INTERRUPTS() vPortClearInterruptMask( 0 )
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetInterruptMask()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) vPortClearInterruptMask( x )
interrupts that have a priority below configMAX_API_CALL_INTERRUPT_PRIORITY. */
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
#define portDISABLE_INTERRUPTS() ulPortSetInterruptMask()
#define portENABLE_INTERRUPTS() vPortClearInterruptMask( 0 )
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetInterruptMask()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortClearInterruptMask(x)
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. These are
* not required for this port but included in case common demo code that uses these
* macros is used. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
not required for this port but included in case common demo code that uses these
macros is used. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
/* Prototype of the FreeRTOS tick handler. This must be installed as the
* handler for whichever peripheral is used to generate the RTOS tick. */
void FreeRTOS_Tick_Handler( void );
handler for whichever peripheral is used to generate the RTOS tick. */
void FreeRTOS_Tick_Handler( void );
/* If configUSE_TASK_FPU_SUPPORT is set to 1 (or left undefined) then tasks are
* created without an FPU context and must call vPortTaskUsesFPU() to give
* themselves an FPU context before using any FPU instructions. If
* configUSE_TASK_FPU_SUPPORT is set to 2 then all tasks will have an FPU context
* by default. */
#if ( configUSE_TASK_FPU_SUPPORT != 2 )
void vPortTaskUsesFPU( void );
#else
created without an FPU context and must call vPortTaskUsesFPU() to give
themselves an FPU context before using any FPU instructions. If
configUSE_TASK_FPU_SUPPORT is set to 2 then all tasks will have an FPU context
by default. */
#if( configUSE_TASK_FPU_SUPPORT != 2 )
void vPortTaskUsesFPU( void );
#else
/* Each task has an FPU context already, so define this function away to
nothing to prevent it being called accidentally. */
#define vPortTaskUsesFPU()
#endif
#define portTASK_USES_FLOATING_POINT() vPortTaskUsesFPU()
/* Each task has an FPU context already, so define this function away to
* nothing to prevent it being called accidentally. */
#define vPortTaskUsesFPU()
#endif
#define portTASK_USES_FLOATING_POINT() vPortTaskUsesFPU()
#define portLOWEST_INTERRUPT_PRIORITY ( ( ( uint32_t ) configUNIQUE_INTERRUPT_PRIORITIES ) - 1UL )
#define portLOWEST_USABLE_INTERRUPT_PRIORITY ( portLOWEST_INTERRUPT_PRIORITY - 1UL )
#define portLOWEST_INTERRUPT_PRIORITY ( ( ( uint32_t ) configUNIQUE_INTERRUPT_PRIORITIES ) - 1UL )
#define portLOWEST_USABLE_INTERRUPT_PRIORITY ( portLOWEST_INTERRUPT_PRIORITY - 1UL )
/* Architecture specific optimisations. */
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/*-----------------------------------------------------------*/
/*-----------------------------------------------------------*/
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) __builtin_clz( uxReadyPriorities ) )
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) __builtin_clz( uxReadyPriorities ) )
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
#ifdef configASSERT
void vPortValidateInterruptPriority( void );
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority()
#endif /* configASSERT */
#ifdef configASSERT
void vPortValidateInterruptPriority( void );
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority()
#endif /* configASSERT */
#define portNOP() __asm volatile ( "NOP" )
#define portINLINE __inline
#define portNOP() __asm volatile( "NOP" )
#define portINLINE __inline
#ifdef __cplusplus
} /* extern C */
#endif
#ifdef __cplusplus
} /* extern C */
#endif
/* The number of bits to shift for an interrupt priority is dependent on the
* number of bits implemented by the interrupt controller. */
#if configUNIQUE_INTERRUPT_PRIORITIES == 16
#define portPRIORITY_SHIFT 4
#define portMAX_BINARY_POINT_VALUE 3
#elif configUNIQUE_INTERRUPT_PRIORITIES == 32
#define portPRIORITY_SHIFT 3
#define portMAX_BINARY_POINT_VALUE 2
#elif configUNIQUE_INTERRUPT_PRIORITIES == 64
#define portPRIORITY_SHIFT 2
#define portMAX_BINARY_POINT_VALUE 1
#elif configUNIQUE_INTERRUPT_PRIORITIES == 128
#define portPRIORITY_SHIFT 1
#define portMAX_BINARY_POINT_VALUE 0
#elif configUNIQUE_INTERRUPT_PRIORITIES == 256
#define portPRIORITY_SHIFT 0
#define portMAX_BINARY_POINT_VALUE 0
#else /* if configUNIQUE_INTERRUPT_PRIORITIES == 16 */
#error Invalid configUNIQUE_INTERRUPT_PRIORITIES setting. configUNIQUE_INTERRUPT_PRIORITIES must be set to the number of unique priorities implemented by the target hardware
#endif /* if configUNIQUE_INTERRUPT_PRIORITIES == 16 */
number of bits implemented by the interrupt controller. */
#if configUNIQUE_INTERRUPT_PRIORITIES == 16
#define portPRIORITY_SHIFT 4
#define portMAX_BINARY_POINT_VALUE 3
#elif configUNIQUE_INTERRUPT_PRIORITIES == 32
#define portPRIORITY_SHIFT 3
#define portMAX_BINARY_POINT_VALUE 2
#elif configUNIQUE_INTERRUPT_PRIORITIES == 64
#define portPRIORITY_SHIFT 2
#define portMAX_BINARY_POINT_VALUE 1
#elif configUNIQUE_INTERRUPT_PRIORITIES == 128
#define portPRIORITY_SHIFT 1
#define portMAX_BINARY_POINT_VALUE 0
#elif configUNIQUE_INTERRUPT_PRIORITIES == 256
#define portPRIORITY_SHIFT 0
#define portMAX_BINARY_POINT_VALUE 0
#else
#error Invalid configUNIQUE_INTERRUPT_PRIORITIES setting. configUNIQUE_INTERRUPT_PRIORITIES must be set to the number of unique priorities implemented by the target hardware
#endif
/* Interrupt controller access addresses. */
#define portICCPMR_PRIORITY_MASK_OFFSET ( 0x04 )
#define portICCIAR_INTERRUPT_ACKNOWLEDGE_OFFSET ( 0x0C )
#define portICCEOIR_END_OF_INTERRUPT_OFFSET ( 0x10 )
#define portICCBPR_BINARY_POINT_OFFSET ( 0x08 )
#define portICCRPR_RUNNING_PRIORITY_OFFSET ( 0x14 )
#define portICCPMR_PRIORITY_MASK_OFFSET ( 0x04 )
#define portICCIAR_INTERRUPT_ACKNOWLEDGE_OFFSET ( 0x0C )
#define portICCEOIR_END_OF_INTERRUPT_OFFSET ( 0x10 )
#define portICCBPR_BINARY_POINT_OFFSET ( 0x08 )
#define portICCRPR_RUNNING_PRIORITY_OFFSET ( 0x14 )
#define portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET )
#define portICCPMR_PRIORITY_MASK_REGISTER ( *( ( volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCPMR_PRIORITY_MASK_OFFSET ) ) )
#define portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCIAR_INTERRUPT_ACKNOWLEDGE_OFFSET )
#define portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCEOIR_END_OF_INTERRUPT_OFFSET )
#define portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCPMR_PRIORITY_MASK_OFFSET )
#define portICCBPR_BINARY_POINT_REGISTER ( *( ( const volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCBPR_BINARY_POINT_OFFSET ) ) )
#define portICCRPR_RUNNING_PRIORITY_REGISTER ( *( ( const volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCRPR_RUNNING_PRIORITY_OFFSET ) ) )
#define portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET )
#define portICCPMR_PRIORITY_MASK_REGISTER ( *( ( volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCPMR_PRIORITY_MASK_OFFSET ) ) )
#define portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCIAR_INTERRUPT_ACKNOWLEDGE_OFFSET )
#define portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCEOIR_END_OF_INTERRUPT_OFFSET )
#define portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCPMR_PRIORITY_MASK_OFFSET )
#define portICCBPR_BINARY_POINT_REGISTER ( *( ( const volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCBPR_BINARY_POINT_OFFSET ) ) )
#define portICCRPR_RUNNING_PRIORITY_REGISTER ( *( ( const volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCRPR_RUNNING_PRIORITY_OFFSET ) ) )
#define portMEMORY_BARRIER() __asm volatile ( "" ::: "memory" )
#define portMEMORY_BARRIER() __asm volatile( "" ::: "memory" )
#endif /* PORTMACRO_H */

1
portable/GCC/ARM_CM0/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------

65
portable/GCC/ARM_CM23/non_secure/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
@ -612,7 +611,7 @@ static void prvTaskExitError( void )
extern uint32_t * __unprivileged_flash_end__;
extern uint32_t * __privileged_sram_start__;
extern uint32_t * __privileged_sram_end__;
#else /* if defined( __ARMCC_VERSION ) */
#else /* if defined( __ARMCC_VERSION ) */
/* Declaration when these variable are exported from linker scripts. */
extern uint32_t __privileged_functions_start__[];
extern uint32_t __privileged_functions_end__[];
@ -802,22 +801,22 @@ void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTIO
ulR0 = pulCallerStackAddress[ 0 ];
#if ( configENABLE_MPU == 1 )
{
/* Read the CONTROL register value. */
__asm volatile ( "mrs %0, control" : "=r" ( ulControl ) );
{
/* Read the CONTROL register value. */
__asm volatile ( "mrs %0, control" : "=r" ( ulControl ) );
/* The task that raised the SVC is privileged if Bit[0]
* in the CONTROL register is 0. */
ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
/* The task that raised the SVC is privileged if Bit[0]
* in the CONTROL register is 0. */
ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
}
#else /* if ( configENABLE_MPU == 1 ) */
{
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0 );
}
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
}
#else /* if ( configENABLE_MPU == 1 ) */
{
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0 );
}
#endif /* configENABLE_MPU */
configASSERT( xSecureContext != NULL );
@ -835,21 +834,21 @@ void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTIO
case portSVC_START_SCHEDULER:
#if ( configENABLE_TRUSTZONE == 1 )
{
/* De-prioritize the non-secure exceptions so that the
* non-secure pendSV runs at the lowest priority. */
SecureInit_DePrioritizeNSExceptions();
{
/* De-prioritize the non-secure exceptions so that the
* non-secure pendSV runs at the lowest priority. */
SecureInit_DePrioritizeNSExceptions();
/* Initialize the secure context management system. */
SecureContext_Init();
}
/* Initialize the secure context management system. */
SecureContext_Init();
}
#endif /* configENABLE_TRUSTZONE */
#if ( configENABLE_FPU == 1 )
{
/* Setup the Floating Point Unit (FPU). */
prvSetupFPU();
}
{
/* Setup the Floating Point Unit (FPU). */
prvSetupFPU();
}
#endif /* configENABLE_FPU */
/* Setup the context of the first task so that the first task starts
@ -882,12 +881,12 @@ void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTIO
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters ) /* PRIVILEGED_FUNCTION */
void * pvParameters ) /* PRIVILEGED_FUNCTION */
#endif /* configENABLE_MPU */
{
/* Simulate the stack frame as it would be created by a context switch
@ -1051,7 +1050,9 @@ void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
{
uint32_t ulRegionStartAddress, ulRegionEndAddress, ulRegionNumber;
int32_t lIndex = 0;
#if defined( __ARMCC_VERSION )
/* Declaration when these variable are defined in code instead of being
* exported from linker scripts. */
extern uint32_t * __privileged_sram_start__;
@ -1079,8 +1080,8 @@ void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
* using a separate MPU region. This is needed because privileged
* SRAM is already protected using an MPU region and ARMv8-M does
* not allow overlapping MPU regions. */
if( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ &&
ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ )
if( ( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ ) &&
( ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ ) )
{
xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = 0;
xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = 0;
@ -1089,7 +1090,7 @@ void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
{
/* Define the region that allows access to the stack. */
ulRegionStartAddress &= portMPU_RBAR_ADDRESS_MASK;
ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = ( ulRegionStartAddress ) |
( portMPU_REGION_NON_SHAREABLE ) |

2383
portable/GCC/ARM_CM23_NTZ/non_secure/port.c
View file

File diff suppressed because it is too large Load diff

1
portable/GCC/ARM_CM3/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------

2383
portable/GCC/ARM_CM33/non_secure/port.c
View file

File diff suppressed because it is too large Load diff

67
portable/GCC/ARM_CM33_NTZ/non_secure/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
@ -612,7 +611,7 @@ static void prvTaskExitError( void )
extern uint32_t * __unprivileged_flash_end__;
extern uint32_t * __privileged_sram_start__;
extern uint32_t * __privileged_sram_end__;
#else /* if defined( __ARMCC_VERSION ) */
#else /* if defined( __ARMCC_VERSION ) */
/* Declaration when these variable are exported from linker scripts. */
extern uint32_t __privileged_functions_start__[];
extern uint32_t __privileged_functions_end__[];
@ -802,22 +801,22 @@ void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTIO
ulR0 = pulCallerStackAddress[ 0 ];
#if ( configENABLE_MPU == 1 )
{
/* Read the CONTROL register value. */
__asm volatile ( "mrs %0, control" : "=r" ( ulControl ) );
{
/* Read the CONTROL register value. */
__asm volatile ( "mrs %0, control" : "=r" ( ulControl ) );
/* The task that raised the SVC is privileged if Bit[0]
* in the CONTROL register is 0. */
ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
/* The task that raised the SVC is privileged if Bit[0]
* in the CONTROL register is 0. */
ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
}
#else /* if ( configENABLE_MPU == 1 ) */
{
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0 );
}
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
}
#else /* if ( configENABLE_MPU == 1 ) */
{
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0 );
}
#endif /* configENABLE_MPU */
configASSERT( xSecureContext != NULL );
@ -835,21 +834,21 @@ void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTIO
case portSVC_START_SCHEDULER:
#if ( configENABLE_TRUSTZONE == 1 )
{
/* De-prioritize the non-secure exceptions so that the
* non-secure pendSV runs at the lowest priority. */
SecureInit_DePrioritizeNSExceptions();
{
/* De-prioritize the non-secure exceptions so that the
* non-secure pendSV runs at the lowest priority. */
SecureInit_DePrioritizeNSExceptions();
/* Initialize the secure context management system. */
SecureContext_Init();
}
/* Initialize the secure context management system. */
SecureContext_Init();
}
#endif /* configENABLE_TRUSTZONE */
#if ( configENABLE_FPU == 1 )
{
/* Setup the Floating Point Unit (FPU). */
prvSetupFPU();
}
{
/* Setup the Floating Point Unit (FPU). */
prvSetupFPU();
}
#endif /* configENABLE_FPU */
/* Setup the context of the first task so that the first task starts
@ -877,18 +876,20 @@ void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTIO
}
/*-----------------------------------------------------------*/
/* *INDENT-OFF* */
#if ( configENABLE_MPU == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters ) /* PRIVILEGED_FUNCTION */
void * pvParameters ) /* PRIVILEGED_FUNCTION */
#endif /* configENABLE_MPU */
/* *INDENT-ON* */
{
/* Simulate the stack frame as it would be created by a context switch
* interrupt. */
@ -1051,7 +1052,9 @@ void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
{
uint32_t ulRegionStartAddress, ulRegionEndAddress, ulRegionNumber;
int32_t lIndex = 0;
#if defined( __ARMCC_VERSION )
/* Declaration when these variable are defined in code instead of being
* exported from linker scripts. */
extern uint32_t * __privileged_sram_start__;
@ -1079,8 +1082,8 @@ void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
* using a separate MPU region. This is needed because privileged
* SRAM is already protected using an MPU region and ARMv8-M does
* not allow overlapping MPU regions. */
if( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ &&
ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ )
if( ( ulRegionStartAddress >= ( uint32_t ) __privileged_sram_start__ ) &&
( ulRegionEndAddress <= ( uint32_t ) __privileged_sram_end__ ) )
{
xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = 0;
xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = 0;
@ -1089,7 +1092,7 @@ void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
{
/* Define the region that allows access to the stack. */
ulRegionStartAddress &= portMPU_RBAR_ADDRESS_MASK;
ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = ( ulRegionStartAddress ) |
( portMPU_REGION_NON_SHAREABLE ) |

1
portable/GCC/ARM_CM3_MPU/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------

1
portable/GCC/ARM_CM4F/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------

31
portable/GCC/ARM_CM4_MPU/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------
@ -360,14 +359,14 @@ static void prvRestoreContextOfFirstTask( void )
" str r3, [r2] \n"/* Disable MPU. */
" \n"
" ldr r2, =0xe000ed9c \n"/* Region Base Address register. */
" ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers [MPU Region # 4 - 7]. */
" stmia r2, {r4-r11} \n" /* Write 4 sets of MPU registers [MPU Region # 4 - 7]. */
" ldmia r1!, {r4-r11} \n"/* Read 4 sets of MPU registers [MPU Region # 4 - 7]. */
" stmia r2, {r4-r11} \n"/* Write 4 sets of MPU registers [MPU Region # 4 - 7]. */
" \n"
#if ( portTOTAL_NUM_REGIONS == 16 )
" ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers [MPU Region # 8 - 11]. */
" stmia r2, {r4-r11} \n" /* Write 4 sets of MPU registers. [MPU Region # 8 - 11]. */
" ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers [MPU Region # 12 - 15]. */
" stmia r2, {r4-r11} \n" /* Write 4 sets of MPU registers. [MPU Region # 12 - 15]. */
" ldmia r1!, {r4-r11} \n"/* Read 4 sets of MPU registers [MPU Region # 8 - 11]. */
" stmia r2, {r4-r11} \n"/* Write 4 sets of MPU registers. [MPU Region # 8 - 11]. */
" ldmia r1!, {r4-r11} \n"/* Read 4 sets of MPU registers [MPU Region # 12 - 15]. */
" stmia r2, {r4-r11} \n"/* Write 4 sets of MPU registers. [MPU Region # 12 - 15]. */
#endif /* portTOTAL_NUM_REGIONS == 16. */
" \n"
" ldr r2, =0xe000ed94 \n"/* MPU_CTRL register. */
@ -584,14 +583,14 @@ void xPortPendSVHandler( void )
" str r3, [r2] \n"/* Disable MPU. */
" \n"
" ldr r2, =0xe000ed9c \n"/* Region Base Address register. */
" ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers [MPU Region # 4 - 7]. */
" stmia r2, {r4-r11} \n" /* Write 4 sets of MPU registers [MPU Region # 4 - 7]. */
" ldmia r1!, {r4-r11} \n"/* Read 4 sets of MPU registers [MPU Region # 4 - 7]. */
" stmia r2, {r4-r11} \n"/* Write 4 sets of MPU registers [MPU Region # 4 - 7]. */
" \n"
#if ( portTOTAL_NUM_REGIONS == 16 )
" ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers [MPU Region # 8 - 11]. */
" stmia r2, {r4-r11} \n" /* Write 4 sets of MPU registers. [MPU Region # 8 - 11]. */
" ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers [MPU Region # 12 - 15]. */
" stmia r2, {r4-r11} \n" /* Write 4 sets of MPU registers. [MPU Region # 12 - 15]. */
" ldmia r1!, {r4-r11} \n"/* Read 4 sets of MPU registers [MPU Region # 8 - 11]. */
" stmia r2, {r4-r11} \n"/* Write 4 sets of MPU registers. [MPU Region # 8 - 11]. */
" ldmia r1!, {r4-r11} \n"/* Read 4 sets of MPU registers [MPU Region # 12 - 15]. */
" stmia r2, {r4-r11} \n"/* Write 4 sets of MPU registers. [MPU Region # 12 - 15]. */
#endif /* portTOTAL_NUM_REGIONS == 16. */
" \n"
" ldr r2, =0xe000ed94 \n"/* MPU_CTRL register. */
@ -941,10 +940,10 @@ void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
* be set to a value equal to or numerically *higher* than
* configMAX_SYSCALL_INTERRUPT_PRIORITY.
*
* Interrupts that use the FreeRTOS API must not be left at their
* default priority of zero as that is the highest possible priority,
* Interrupts that use the FreeRTOS API must not be left at their
* default priority of zero as that is the highest possible priority,
* which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY,
* and therefore also guaranteed to be invalid.
* and therefore also guaranteed to be invalid.
*
* FreeRTOS maintains separate thread and ISR API functions to ensure
* interrupt entry is as fast and simple as possible.

500
portable/GCC/ARM_CM4_MPU/portmacro.h
View file

@ -22,16 +22,18 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/*-----------------------------------------------------------
* Port specific definitions.
@ -44,169 +46,170 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
* not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
#endif
#define portTICK_TYPE_IS_ATOMIC 1
#endif
/*-----------------------------------------------------------*/
/* MPU specific constants. */
#define portUSING_MPU_WRAPPERS 1
#define portPRIVILEGE_BIT ( 0x80000000UL )
#define portUSING_MPU_WRAPPERS 1
#define portPRIVILEGE_BIT ( 0x80000000UL )
#define portMPU_REGION_READ_WRITE ( 0x03UL << 24UL )
#define portMPU_REGION_PRIVILEGED_READ_ONLY ( 0x05UL << 24UL )
#define portMPU_REGION_READ_ONLY ( 0x06UL << 24UL )
#define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0x01UL << 24UL )
#define portMPU_REGION_PRIVILEGED_READ_WRITE_UNPRIV_READ_ONLY ( 0x02UL << 24UL )
#define portMPU_REGION_CACHEABLE_BUFFERABLE ( 0x07UL << 16UL )
#define portMPU_REGION_EXECUTE_NEVER ( 0x01UL << 28UL )
/* Location of the TEX,S,C,B bits in the MPU Region Attribute and Size
* Register (RASR). */
#define portMPU_RASR_TEX_S_C_B_LOCATION ( 16UL )
#define portMPU_RASR_TEX_S_C_B_MASK ( 0x3FUL )
#define portMPU_REGION_READ_WRITE ( 0x03UL << 24UL )
#define portMPU_REGION_PRIVILEGED_READ_ONLY ( 0x05UL << 24UL )
#define portMPU_REGION_READ_ONLY ( 0x06UL << 24UL )
#define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0x01UL << 24UL )
#define portMPU_REGION_PRIVILEGED_READ_WRITE_UNPRIV_READ_ONLY ( 0x02UL << 24UL )
#define portMPU_REGION_CACHEABLE_BUFFERABLE ( 0x07UL << 16UL )
#define portMPU_REGION_EXECUTE_NEVER ( 0x01UL << 28UL )
/* MPU settings that can be overriden in FreeRTOSConfig.h. */
#ifndef configTOTAL_MPU_REGIONS
/* Define to 8 for backward compatibility. */
#define configTOTAL_MPU_REGIONS ( 8UL )
#endif
/* Location of the TEX,S,C,B bits in the MPU Region Attribute and Size
* Register (RASR). */
#define portMPU_RASR_TEX_S_C_B_LOCATION ( 16UL )
#define portMPU_RASR_TEX_S_C_B_MASK ( 0x3FUL )
/*
* The TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits define the
* memory type, and where necessary the cacheable and shareable properties
* of the memory region.
*
* The TEX, C, and B bits together indicate the memory type of the region,
* and:
* - For Normal memory, the cacheable properties of the region.
* - For Device memory, whether the region is shareable.
*
* For Normal memory regions, the S bit indicates whether the region is
* shareable. For Strongly-ordered and Device memory, the S bit is ignored.
*
* See the following two tables for setting TEX, S, C and B bits for
* unprivileged flash, privileged flash and privileged RAM regions.
*
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| TEX | C | B | Memory type | Description or Normal region cacheability | Shareable? |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 000 | 0 | 0 | Strongly-ordered | Strongly ordered | Shareable |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 000 | 0 | 1 | Device | Shared device | Shareable |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 000 | 1 | 0 | Normal | Outer and inner write-through; no write allocate | S bit |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 000 | 1 | 1 | Normal | Outer and inner write-back; no write allocate | S bit |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 001 | 0 | 0 | Normal | Outer and inner Non-cacheable | S bit |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 001 | 0 | 1 | Reserved | Reserved | Reserved |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 001 | 1 | 0 | IMPLEMENTATION DEFINED | IMPLEMENTATION DEFINED | IMPLEMENTATION DEFINED |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 001 | 1 | 1 | Normal | Outer and inner write-back; write and read allocate | S bit |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 010 | 0 | 0 | Device | Non-shared device | Not shareable |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 010 | 0 | 1 | Reserved | Reserved | Reserved |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 010 | 1 | X | Reserved | Reserved | Reserved |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 011 | X | X | Reserved | Reserved | Reserved |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 1BB | A | A | Normal | Cached memory, with AA and BB indicating the inner and | Reserved |
| | | | | outer cacheability rules that must be exported on the | |
| | | | | bus. See the table below for the cacheability policy | |
| | | | | encoding. memory, BB=Outer policy, AA=Inner policy. | |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
/* MPU settings that can be overriden in FreeRTOSConfig.h. */
#ifndef configTOTAL_MPU_REGIONS
/* Define to 8 for backward compatibility. */
#define configTOTAL_MPU_REGIONS ( 8UL )
#endif
+-----------------------------------------+----------------------------------------+
| AA or BB subfield of {TEX,C,B} encoding | Cacheability policy |
+-----------------------------------------+----------------------------------------+
| 00 | Non-cacheable |
+-----------------------------------------+----------------------------------------+
| 01 | Write-back, write and read allocate |
+-----------------------------------------+----------------------------------------+
| 10 | Write-through, no write allocate |
+-----------------------------------------+----------------------------------------+
| 11 | Write-back, no write allocate |
+-----------------------------------------+----------------------------------------+
*/
/*
* The TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits define the
* memory type, and where necessary the cacheable and shareable properties
* of the memory region.
*
* The TEX, C, and B bits together indicate the memory type of the region,
* and:
* - For Normal memory, the cacheable properties of the region.
* - For Device memory, whether the region is shareable.
*
* For Normal memory regions, the S bit indicates whether the region is
* shareable. For Strongly-ordered and Device memory, the S bit is ignored.
*
* See the following two tables for setting TEX, S, C and B bits for
* unprivileged flash, privileged flash and privileged RAM regions.
*
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| TEX | C | B | Memory type | Description or Normal region cacheability | Shareable? |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 000 | 0 | 0 | Strongly-ordered | Strongly ordered | Shareable |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 000 | 0 | 1 | Device | Shared device | Shareable |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 000 | 1 | 0 | Normal | Outer and inner write-through; no write allocate | S bit |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 000 | 1 | 1 | Normal | Outer and inner write-back; no write allocate | S bit |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 001 | 0 | 0 | Normal | Outer and inner Non-cacheable | S bit |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 001 | 0 | 1 | Reserved | Reserved | Reserved |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 001 | 1 | 0 | IMPLEMENTATION DEFINED | IMPLEMENTATION DEFINED | IMPLEMENTATION DEFINED |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 001 | 1 | 1 | Normal | Outer and inner write-back; write and read allocate | S bit |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 010 | 0 | 0 | Device | Non-shared device | Not shareable |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 010 | 0 | 1 | Reserved | Reserved | Reserved |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 010 | 1 | X | Reserved | Reserved | Reserved |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 011 | X | X | Reserved | Reserved | Reserved |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
| 1BB | A | A | Normal | Cached memory, with AA and BB indicating the inner and | Reserved |
| | | | | outer cacheability rules that must be exported on the | |
| | | | | bus. See the table below for the cacheability policy | |
| | | | | encoding. memory, BB=Outer policy, AA=Inner policy. | |
+-----+---+---+------------------------+--------------------------------------------------------+-------------------------+
|
+-----------------------------------------+----------------------------------------+
| AA or BB subfield of {TEX,C,B} encoding | Cacheability policy |
+-----------------------------------------+----------------------------------------+
| 00 | Non-cacheable |
+-----------------------------------------+----------------------------------------+
| 01 | Write-back, write and read allocate |
+-----------------------------------------+----------------------------------------+
| 10 | Write-through, no write allocate |
+-----------------------------------------+----------------------------------------+
| 11 | Write-back, no write allocate |
+-----------------------------------------+----------------------------------------+
*/
/* TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits for flash
* region. */
#ifndef configTEX_S_C_B_FLASH
/* Default to TEX=000, S=1, C=1, B=1 for backward compatibility. */
#define configTEX_S_C_B_FLASH ( 0x07UL )
#endif
/* TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits for flash
* region. */
#ifndef configTEX_S_C_B_FLASH
/* Default to TEX=000, S=1, C=1, B=1 for backward compatibility. */
#define configTEX_S_C_B_FLASH ( 0x07UL )
#endif
/* TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits for RAM
* region. */
#ifndef configTEX_S_C_B_SRAM
/* Default to TEX=000, S=1, C=1, B=1 for backward compatibility. */
#define configTEX_S_C_B_SRAM ( 0x07UL )
#endif
/* TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits for RAM
* region. */
#ifndef configTEX_S_C_B_SRAM
/* Default to TEX=000, S=1, C=1, B=1 for backward compatibility. */
#define configTEX_S_C_B_SRAM ( 0x07UL )
#endif
#define portUNPRIVILEGED_FLASH_REGION ( 0UL )
#define portPRIVILEGED_FLASH_REGION ( 1UL )
#define portPRIVILEGED_RAM_REGION ( 2UL )
#define portGENERAL_PERIPHERALS_REGION ( 3UL )
#define portSTACK_REGION ( 4UL )
#define portFIRST_CONFIGURABLE_REGION ( 5UL )
#define portTOTAL_NUM_REGIONS ( configTOTAL_MPU_REGIONS )
#define portNUM_CONFIGURABLE_REGIONS ( portTOTAL_NUM_REGIONS - portFIRST_CONFIGURABLE_REGION )
#define portLAST_CONFIGURABLE_REGION ( portTOTAL_NUM_REGIONS - 1 )
#define portUNPRIVILEGED_FLASH_REGION ( 0UL )
#define portPRIVILEGED_FLASH_REGION ( 1UL )
#define portPRIVILEGED_RAM_REGION ( 2UL )
#define portGENERAL_PERIPHERALS_REGION ( 3UL )
#define portSTACK_REGION ( 4UL )
#define portFIRST_CONFIGURABLE_REGION ( 5UL )
#define portTOTAL_NUM_REGIONS ( configTOTAL_MPU_REGIONS )
#define portNUM_CONFIGURABLE_REGIONS ( portTOTAL_NUM_REGIONS - portFIRST_CONFIGURABLE_REGION )
#define portLAST_CONFIGURABLE_REGION ( portTOTAL_NUM_REGIONS - 1 )
#define portSWITCH_TO_USER_MODE() __asm volatile ( " mrs r0, control \n orr r0, #1 \n msr control, r0 " ::: "r0", "memory" )
#define portSWITCH_TO_USER_MODE() __asm volatile ( " mrs r0, control \n orr r0, #1 \n msr control, r0 " ::: "r0", "memory" )
typedef struct MPU_REGION_REGISTERS
{
uint32_t ulRegionBaseAddress;
uint32_t ulRegionAttribute;
} xMPU_REGION_REGISTERS;
typedef struct MPU_REGION_REGISTERS
{
uint32_t ulRegionBaseAddress;
uint32_t ulRegionAttribute;
} xMPU_REGION_REGISTERS;
/* Plus 1 to create space for the stack region. */
typedef struct MPU_SETTINGS
{
xMPU_REGION_REGISTERS xRegion[ portTOTAL_NUM_REGIONS ];
} xMPU_SETTINGS;
typedef struct MPU_SETTINGS
{
xMPU_REGION_REGISTERS xRegion[ portTOTAL_NUM_REGIONS ];
} xMPU_SETTINGS;
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portDONT_DISCARD __attribute__( ( used ) )
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portDONT_DISCARD __attribute__( ( used ) )
/*-----------------------------------------------------------*/
/* SVC numbers for various services. */
#define portSVC_START_SCHEDULER 0
#define portSVC_YIELD 1
#define portSVC_RAISE_PRIVILEGE 2
#define portSVC_START_SCHEDULER 0
#define portSVC_YIELD 1
#define portSVC_RAISE_PRIVILEGE 2
/* Scheduler utilities. */
#define portYIELD() __asm volatile ( " SVC %0 \n"::"i" ( portSVC_YIELD ) : "memory" )
#define portYIELD_WITHIN_API() \
#define portYIELD() __asm volatile ( " SVC %0 \n"::"i" ( portSVC_YIELD ) : "memory" )
#define portYIELD_WITHIN_API() \
{ \
/* Set a PendSV to request a context switch. */ \
portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \
@ -217,178 +220,181 @@
__asm volatile ( "isb" ); \
}
#define portNVIC_INT_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000ed04 ) )
#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL )
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
#define portNVIC_INT_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000ed04 ) )
#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL )
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
/*-----------------------------------------------------------*/
/* Critical section management. */
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) vPortSetBASEPRI( x )
#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI()
#define portENABLE_INTERRUPTS() vPortSetBASEPRI( 0 )
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) vPortSetBASEPRI( x )
#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI()
#define portENABLE_INTERRUPTS() vPortSetBASEPRI( 0 )
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. These are
* not necessary for to use this port. They are defined so the common demo files
* (which build with all the ports) will build. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
/*-----------------------------------------------------------*/
/* Architecture specific optimisations. */
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
/* Generic helper function. */
__attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap )
{
uint8_t ucReturn;
__attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap )
{
uint8_t ucReturn;
__asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) : "memory" );
__asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) : "memory" );
return ucReturn;
}
return ucReturn;
}
/* Check the configuration. */
#if ( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
#if ( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/*-----------------------------------------------------------*/
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) )
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) )
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
/*-----------------------------------------------------------*/
#ifdef configASSERT
void vPortValidateInterruptPriority( void );
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority()
#endif
#ifdef configASSERT
void vPortValidateInterruptPriority( void );
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority()
#endif
/* portNOP() is not required by this port. */
#define portNOP()
#define portNOP()
#define portINLINE __inline
#define portINLINE __inline
#ifndef portFORCE_INLINE
#define portFORCE_INLINE inline __attribute__( ( always_inline ) )
#endif
#ifndef portFORCE_INLINE
#define portFORCE_INLINE inline __attribute__( ( always_inline ) )
#endif
/*-----------------------------------------------------------*/
extern BaseType_t xIsPrivileged( void );
extern void vResetPrivilege( void );
extern BaseType_t xIsPrivileged( void );
extern void vResetPrivilege( void );
/**
* @brief Checks whether or not the processor is privileged.
*
* @return 1 if the processor is already privileged, 0 otherwise.
*/
#define portIS_PRIVILEGED() xIsPrivileged()
#define portIS_PRIVILEGED() xIsPrivileged()
/**
* @brief Raise an SVC request to raise privilege.
*/
#define portRAISE_PRIVILEGE() __asm volatile ( "svc %0 \n" ::"i" ( portSVC_RAISE_PRIVILEGE ) : "memory" );
#define portRAISE_PRIVILEGE() __asm volatile ( "svc %0 \n" ::"i" ( portSVC_RAISE_PRIVILEGE ) : "memory" );
/**
* @brief Lowers the privilege level by setting the bit 0 of the CONTROL
* register.
*/
#define portRESET_PRIVILEGE() vResetPrivilege()
#define portRESET_PRIVILEGE() vResetPrivilege()
/*-----------------------------------------------------------*/
portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void )
portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void )
{
uint32_t ulCurrentInterrupt;
BaseType_t xReturn;
/* Obtain the number of the currently executing interrupt. */
__asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
if( ulCurrentInterrupt == 0 )
{
uint32_t ulCurrentInterrupt;
BaseType_t xReturn;
/* Obtain the number of the currently executing interrupt. */
__asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
if( ulCurrentInterrupt == 0 )
{
xReturn = pdFALSE;
}
else
{
xReturn = pdTRUE;
}
return xReturn;
xReturn = pdFALSE;
}
else
{
xReturn = pdTRUE;
}
/*-----------------------------------------------------------*/
portFORCE_INLINE static void vPortRaiseBASEPRI( void )
{
uint32_t ulNewBASEPRI;
__asm volatile
(
" mov %0, %1 \n"\
" msr basepri, %0 \n"\
" isb \n"\
" dsb \n"\
: "=r" ( ulNewBASEPRI ) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory"
);
}
return xReturn;
}
/*-----------------------------------------------------------*/
portFORCE_INLINE static uint32_t ulPortRaiseBASEPRI( void )
{
uint32_t ulOriginalBASEPRI, ulNewBASEPRI;
portFORCE_INLINE static void vPortRaiseBASEPRI( void )
{
uint32_t ulNewBASEPRI;
__asm volatile
(
" mrs %0, basepri \n"\
" mov %1, %2 \n"\
" msr basepri, %1 \n"\
" isb \n"\
" dsb \n"\
: "=r" ( ulOriginalBASEPRI ), "=r" ( ulNewBASEPRI ) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory"
);
__asm volatile
(
" mov %0, %1 \n"\
" msr basepri, %0 \n"\
" isb \n"\
" dsb \n"\
: "=r" ( ulNewBASEPRI ) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory"
);
}
/* This return will not be reached but is necessary to prevent compiler
* warnings. */
return ulOriginalBASEPRI;
}
/*-----------------------------------------------------------*/
portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue )
{
__asm volatile
(
" msr basepri, %0 "::"r" ( ulNewMaskValue ) : "memory"
);
}
portFORCE_INLINE static uint32_t ulPortRaiseBASEPRI( void )
{
uint32_t ulOriginalBASEPRI, ulNewBASEPRI;
__asm volatile
(
" mrs %0, basepri \n"\
" mov %1, %2 \n"\
" msr basepri, %1 \n"\
" isb \n"\
" dsb \n"\
: "=r" ( ulOriginalBASEPRI ), "=r" ( ulNewBASEPRI ) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory"
);
/* This return will not be reached but is necessary to prevent compiler
* warnings. */
return ulOriginalBASEPRI;
}
/*-----------------------------------------------------------*/
#define portMEMORY_BARRIER() __asm volatile ( "" ::: "memory" )
#ifndef configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY
#warning "configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY is not defined. We recommend defining it to 1 in FreeRTOSConfig.h for better security. https: /*www.freertos.org/FreeRTOS-V10.3.x.html" */
#define configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY 0
#endif
portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue )
{
__asm volatile
(
" msr basepri, %0 "::"r" ( ulNewMaskValue ) : "memory"
);
}
/*-----------------------------------------------------------*/
#define portMEMORY_BARRIER() __asm volatile ( "" ::: "memory" )
#ifndef configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY
#warning "configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY is not defined. We recommend defining it to 1 in FreeRTOSConfig.h for better security. https: /*www.freertos.org/FreeRTOS-V10.3.x.html" */
#define configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY 0
#endif
/*-----------------------------------------------------------*/
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* PORTMACRO_H */

1
portable/GCC/ARM_CM7/r0p1/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------

40
portable/GCC/ARM_CR5/port.c
View file

@ -22,7 +22,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/* Standard includes. */
@ -149,17 +148,18 @@
/* Adding the necessary stuff in order to be able to determine from C code wheter or not the IRQs are enabled at the processor level (not interrupt controller level) */
#define GET_CPSR() ({u32 rval = 0U; \
__asm__ __volatile__(\
"mrs %0, cpsr\n"\
: "=r" (rval)\
);\
rval;\
})
#define GET_CPSR() \
( { u32 rval = 0U; \
__asm__ __volatile__ ( \
"mrs %0, cpsr\n"\
: "=r" ( rval ) \
); \
rval; \
} )
#define CPSR_IRQ_ENABLE_MASK 0x80U
#define CPSR_IRQ_ENABLE_MASK 0x80U
#define IS_IRQ_DISABLED() ({unsigned int val = 0; val = (GET_CPSR() & CPSR_IRQ_ENABLE_MASK) ? 1 : 0; val;})
#define IS_IRQ_DISABLED() ( { unsigned int val = 0; val = ( GET_CPSR() & CPSR_IRQ_ENABLE_MASK ) ? 1 : 0; val; } )
/*-----------------------------------------------------------*/
/*
@ -482,12 +482,12 @@ uint32_t ulPortSetInterruptMask( void )
{
uint32_t ulReturn;
uint32_t wasIRQDisabled;
/* We keep track of if the IRQ are enabled in the CPU (as opposed to interrupts masked in the interrupt controller, like the intend of this function).
* This is very important because when the CPU is interrupted, among other things, the hardware clears the IRQ Enable bit in the CPSR of the IRQ CPU Mode in which
* we enter. */
wasIRQDisabled = IS_IRQ_DISABLED();
/* Interrupt in the CPU must be turned off while the ICCPMR is being
* updated. */
portCPU_IRQ_DISABLE();
@ -505,18 +505,20 @@ uint32_t ulPortSetInterruptMask( void )
"isb \n"::: "memory" );
}
/* Just like this function returns a value of wether or not the interrupts where masked in the interrupt controller in order to avoid race condition when
/* Just like this function returns a value of wether or not the interrupts where masked in the interrupt controller in order to avoid race condition when
* calling its matching vPortClearInterruptMask function, we needed a 'wasIRQDisabled' variable holding the state of the IRQ Enable bit in the CPSR in order
* to leave that bit in it's original state. Like mentioned above, hardware automatically clear the IRQEnable bit upon trapping into IRQ Mode, so the programmer
* to leave that bit in it's original state. Like mentioned above, hardware automatically clear the IRQEnable bit upon trapping into IRQ Mode, so the programmer
* cannot make assumption about it's state. Very rare, but very important race condition is avoided with this when this function is called in an ISR. The race
* condition in question was discovered when integrating tracealyzer code. Inside the function 'void vTaskSwitchContext( void )' in tasks.c, there is a macro 'traceTASK_SWITCHED_IN();'
* which gets replaced by something when using the tracing capabilities. That macro protects some critical section with matching calls to 'ulPortSetInterruptMask'
* which gets replaced by something when using the tracing capabilities. That macro protects some critical section with matching calls to 'ulPortSetInterruptMask'
* and 'vPortClearInterruptMask'. At the time of calling those functions, the interrupt mask is not set in the interrupt controller, thus the only protecting barrier
* against the CPU traping into recursive interrupt was the IRQ Enable bit in the CPSR. By not taking it into acount, the very code that protects the CPU against
* critical section violation just enabled it to happen : A SysTick was waiting to happen, and calling 'portCPU_IRQ_ENABLE' would enable it to occur... Thus triggering a
* against the CPU traping into recursive interrupt was the IRQ Enable bit in the CPSR. By not taking it into acount, the very code that protects the CPU against
* critical section violation just enabled it to happen : A SysTick was waiting to happen, and calling 'portCPU_IRQ_ENABLE' would enable it to occur... Thus triggering a
* switch of context while already performing a switch context. */
if(!wasIRQDisabled)
portCPU_IRQ_ENABLE();
if( !wasIRQDisabled )
{
portCPU_IRQ_ENABLE();
}
return ulReturn;
}

340
portable/GCC/ARM_CRx_No_GIC/port.c
View file

@ -33,50 +33,50 @@
#include "task.h"
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
/* Check the configuration. */
#if ( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
/* Check the configuration. */
#if( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
#ifndef configSETUP_TICK_INTERRUPT
#error configSETUP_TICK_INTERRUPT() must be defined in FreeRTOSConfig.h to call the function that sets up the tick interrupt.
#error configSETUP_TICK_INTERRUPT() must be defined in FreeRTOSConfig.h to call the function that sets up the tick interrupt.
#endif
#ifndef configCLEAR_TICK_INTERRUPT
#error configCLEAR_TICK_INTERRUPT must be defined in FreeRTOSConfig.h to clear which ever interrupt was used to generate the tick interrupt.
#error configCLEAR_TICK_INTERRUPT must be defined in FreeRTOSConfig.h to clear which ever interrupt was used to generate the tick interrupt.
#endif
/* A critical section is exited when the critical section nesting count reaches
* this value. */
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
this value. */
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
/* Tasks are not created with a floating point context, but can be given a
* floating point context after they have been created. A variable is stored as
* part of the tasks context that holds portNO_FLOATING_POINT_CONTEXT if the task
* does not have an FPU context, or any other value if the task does have an FPU
* context. */
#define portNO_FLOATING_POINT_CONTEXT ( ( StackType_t ) 0 )
floating point context after they have been created. A variable is stored as
part of the tasks context that holds portNO_FLOATING_POINT_CONTEXT if the task
does not have an FPU context, or any other value if the task does have an FPU
context. */
#define portNO_FLOATING_POINT_CONTEXT ( ( StackType_t ) 0 )
/* Constants required to setup the initial task context. */
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, IRQ enabled FIQ enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portTHUMB_MODE_ADDRESS ( 0x01UL )
#define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, IRQ enabled FIQ enabled. */
#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 )
#define portTHUMB_MODE_ADDRESS ( 0x01UL )
/* Masks all bits in the APSR other than the mode bits. */
#define portAPSR_MODE_BITS_MASK ( 0x1F )
#define portAPSR_MODE_BITS_MASK ( 0x1F )
/* The value of the mode bits in the APSR when the CPU is executing in user
* mode. */
#define portAPSR_USER_MODE ( 0x10 )
mode. */
#define portAPSR_USER_MODE ( 0x10 )
/* Let the user override the pre-loading of the initial LR with the address of
* prvTaskExitError() in case it messes up unwinding of the stack in the
* debugger. */
prvTaskExitError() in case it messes up unwinding of the stack in the
debugger. */
#ifdef configTASK_RETURN_ADDRESS
#define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS
#define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS
#else
#define portTASK_RETURN_ADDRESS prvTaskExitError
#define portTASK_RETURN_ADDRESS prvTaskExitError
#endif
/*-----------------------------------------------------------*/
@ -95,229 +95,225 @@ static void prvTaskExitError( void );
/*-----------------------------------------------------------*/
/* A variable is used to keep track of the critical section nesting. This
* variable has to be stored as part of the task context and must be initialised to
* a non zero value to ensure interrupts don't inadvertently become unmasked before
* the scheduler starts. As it is stored as part of the task context it will
* automatically be set to 0 when the first task is started. */
variable has to be stored as part of the task context and must be initialised to
a non zero value to ensure interrupts don't inadvertently become unmasked before
the scheduler starts. As it is stored as part of the task context it will
automatically be set to 0 when the first task is started. */
volatile uint32_t ulCriticalNesting = 9999UL;
/* Saved as part of the task context. If ulPortTaskHasFPUContext is non-zero then
* a floating point context must be saved and restored for the task. */
a floating point context must be saved and restored for the task. */
volatile uint32_t ulPortTaskHasFPUContext = pdFALSE;
/* Set to 1 to pend a context switch from an ISR. */
volatile uint32_t ulPortYieldRequired = pdFALSE;
/* Counts the interrupt nesting depth. A context switch is only performed if
* if the nesting depth is 0. */
if the nesting depth is 0. */
volatile uint32_t ulPortInterruptNesting = 0UL;
/* Used in the asm file to clear an interrupt. */
__attribute__( ( used ) ) const uint32_t ulICCEOIR = configEOI_ADDRESS;
__attribute__(( used )) const uint32_t ulICCEOIR = configEOI_ADDRESS;
/*-----------------------------------------------------------*/
/*
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro.
*
* The fist real value on the stack is the status register, which is set for
* system mode, with interrupts enabled. A few NULLs are added first to ensure
* GDB does not try decoding a non-existent return address. */
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro.
if( ( ( uint32_t ) pxCode & portTHUMB_MODE_ADDRESS ) != 0x00UL )
{
/* The task will start in THUMB mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
The fist real value on the stack is the status register, which is set for
system mode, with interrupts enabled. A few NULLs are added first to ensure
GDB does not try decoding a non-existent return address. */
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) NULL;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
pxTopOfStack--;
if( ( ( uint32_t ) pxCode & portTHUMB_MODE_ADDRESS ) != 0x00UL )
{
/* The task will start in THUMB mode. */
*pxTopOfStack |= portTHUMB_MODE_BIT;
}
/* Next the return address, which in this case is the start of the task. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
pxTopOfStack--;
/* Next all the registers other than the stack pointer. */
*pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* Next the return address, which in this case is the start of the task. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
/* The task will start with a critical nesting count of 0 as interrupts are
* enabled. */
*pxTopOfStack = portNO_CRITICAL_NESTING;
pxTopOfStack--;
/* Next all the registers other than the stack pointer. */
*pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
/* The task will start without a floating point context. A task that uses
* the floating point hardware must call vPortTaskUsesFPU() before executing
* any floating point instructions. */
*pxTopOfStack = portNO_FLOATING_POINT_CONTEXT;
/* The task will start with a critical nesting count of 0 as interrupts are
enabled. */
*pxTopOfStack = portNO_CRITICAL_NESTING;
pxTopOfStack--;
return pxTopOfStack;
/* The task will start without a floating point context. A task that uses
the floating point hardware must call vPortTaskUsesFPU() before executing
any floating point instructions. */
*pxTopOfStack = portNO_FLOATING_POINT_CONTEXT;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
static void prvTaskExitError( void )
{
/* A function that implements a task must not exit or attempt to return to
* its caller as there is nothing to return to. If a task wants to exit it
* should instead call vTaskDelete( NULL ).
*
* Artificially force an assert() to be triggered if configASSERT() is
* defined, then stop here so application writers can catch the error. */
configASSERT( ulPortInterruptNesting == ~0UL );
portDISABLE_INTERRUPTS();
/* A function that implements a task must not exit or attempt to return to
its caller as there is nothing to return to. If a task wants to exit it
should instead call vTaskDelete( NULL ).
for( ; ; )
{
}
Artificially force an assert() to be triggered if configASSERT() is
defined, then stop here so application writers can catch the error. */
configASSERT( ulPortInterruptNesting == ~0UL );
portDISABLE_INTERRUPTS();
for( ;; );
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
uint32_t ulAPSR;
uint32_t ulAPSR;
/* Only continue if the CPU is not in User mode. The CPU must be in a
* Privileged mode for the scheduler to start. */
__asm volatile ( "MRS %0, APSR" : "=r" ( ulAPSR )::"memory" );
/* Only continue if the CPU is not in User mode. The CPU must be in a
Privileged mode for the scheduler to start. */
__asm volatile ( "MRS %0, APSR" : "=r" ( ulAPSR ) :: "memory" );
ulAPSR &= portAPSR_MODE_BITS_MASK;
configASSERT( ulAPSR != portAPSR_USER_MODE );
ulAPSR &= portAPSR_MODE_BITS_MASK;
configASSERT( ulAPSR != portAPSR_USER_MODE );
if( ulAPSR != portAPSR_USER_MODE )
{
/* Start the timer that generates the tick ISR. */
portDISABLE_INTERRUPTS();
configSETUP_TICK_INTERRUPT();
if( ulAPSR != portAPSR_USER_MODE )
{
/* Start the timer that generates the tick ISR. */
portDISABLE_INTERRUPTS();
configSETUP_TICK_INTERRUPT();
/* Start the first task executing. */
vPortRestoreTaskContext();
}
/* Start the first task executing. */
vPortRestoreTaskContext();
}
/* Will only get here if vTaskStartScheduler() was called with the CPU in
* a non-privileged mode or the binary point register was not set to its lowest
* possible value. prvTaskExitError() is referenced to prevent a compiler
* warning about it being defined but not referenced in the case that the user
* defines their own exit address. */
( void ) prvTaskExitError;
return 0;
/* Will only get here if vTaskStartScheduler() was called with the CPU in
a non-privileged mode or the binary point register was not set to its lowest
possible value. prvTaskExitError() is referenced to prevent a compiler
warning about it being defined but not referenced in the case that the user
defines their own exit address. */
( void ) prvTaskExitError;
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* Not implemented in ports where there is nothing to return to.
* Artificially force an assert. */
configASSERT( ulCriticalNesting == 1000UL );
/* Not implemented in ports where there is nothing to return to.
Artificially force an assert. */
configASSERT( ulCriticalNesting == 1000UL );
}
/*-----------------------------------------------------------*/
void vPortEnterCritical( void )
{
portDISABLE_INTERRUPTS();
portDISABLE_INTERRUPTS();
/* Now interrupts are disabled ulCriticalNesting can be accessed
* directly. Increment ulCriticalNesting to keep a count of how many times
* portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* Now interrupts are disabled ulCriticalNesting can be accessed
directly. Increment ulCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* This is not the interrupt safe version of the enter critical function so
* assert() if it is being called from an interrupt context. Only API
* functions that end in "FromISR" can be used in an interrupt. Only assert if
* the critical nesting count is 1 to protect against recursive calls if the
* assert function also uses a critical section. */
if( ulCriticalNesting == 1 )
{
configASSERT( ulPortInterruptNesting == 0 );
}
/* This is not the interrupt safe version of the enter critical function so
assert() if it is being called from an interrupt context. Only API
functions that end in "FromISR" can be used in an interrupt. Only assert if
the critical nesting count is 1 to protect against recursive calls if the
assert function also uses a critical section. */
if( ulCriticalNesting == 1 )
{
configASSERT( ulPortInterruptNesting == 0 );
}
}
/*-----------------------------------------------------------*/
void vPortExitCritical( void )
{
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as the critical section is being
* exited. */
ulCriticalNesting--;
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
/* Decrement the nesting count as the critical section is being
exited. */
ulCriticalNesting--;
/* If the nesting level has reached zero then all interrupt
* priorities must be re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Critical nesting has reached zero so all interrupt priorities
* should be unmasked. */
portENABLE_INTERRUPTS();
}
}
/* If the nesting level has reached zero then all interrupt
priorities must be re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Critical nesting has reached zero so all interrupt priorities
should be unmasked. */
portENABLE_INTERRUPTS();
}
}
}
/*-----------------------------------------------------------*/
void FreeRTOS_Tick_Handler( void )
{
uint32_t ulInterruptStatus;
uint32_t ulInterruptStatus;
ulInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
ulInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
/* Increment the RTOS tick. */
if( xTaskIncrementTick() != pdFALSE )
{
ulPortYieldRequired = pdTRUE;
}
/* Increment the RTOS tick. */
if( xTaskIncrementTick() != pdFALSE )
{
ulPortYieldRequired = pdTRUE;
}
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulInterruptStatus );
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulInterruptStatus );
configCLEAR_TICK_INTERRUPT();
configCLEAR_TICK_INTERRUPT();
}
/*-----------------------------------------------------------*/
void vPortTaskUsesFPU( void )
{
uint32_t ulInitialFPSCR = 0;
uint32_t ulInitialFPSCR = 0;
/* A task is registering the fact that it needs an FPU context. Set the
* FPU flag (which is saved as part of the task context). */
ulPortTaskHasFPUContext = pdTRUE;
/* A task is registering the fact that it needs an FPU context. Set the
FPU flag (which is saved as part of the task context). */
ulPortTaskHasFPUContext = pdTRUE;
/* Initialise the floating point status register. */
__asm volatile ( "FMXR FPSCR, %0" ::"r" ( ulInitialFPSCR ) : "memory" );
/* Initialise the floating point status register. */
__asm volatile ( "FMXR FPSCR, %0" :: "r" (ulInitialFPSCR) : "memory" );
}
/*-----------------------------------------------------------*/

182
portable/GCC/ARM_CRx_No_GIC/portmacro.h
View file

@ -26,11 +26,11 @@
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,141 +43,139 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
* not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
/*-----------------------------------------------------------*/
/* Task utilities. */
/* Called at the end of an ISR that can cause a context switch. */
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
{ \
extern volatile uint32_t ulPortYieldRequired; \
\
if( xSwitchRequired != pdFALSE ) \
{ \
ulPortYieldRequired = pdTRUE; \
} \
}
#define portEND_SWITCHING_ISR( xSwitchRequired )\
{ \
extern volatile uint32_t ulPortYieldRequired; \
\
if( xSwitchRequired != pdFALSE ) \
{ \
ulPortYieldRequired = pdTRUE; \
} \
}
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
#define portYIELD() \
__asm volatile ( "SWI 0 \n"\
"ISB "::: "memory" );
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
#define portYIELD() __asm volatile ( "SWI 0 \n" \
"ISB " ::: "memory" );
/*-----------------------------------------------------------
* Critical section control
*----------------------------------------------------------*/
* Critical section control
*----------------------------------------------------------*/
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern uint32_t ulPortSetInterruptMask( void );
extern void vPortClearInterruptMask( uint32_t ulNewMaskValue );
extern void vPortInstallFreeRTOSVectorTable( void );
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern uint32_t ulPortSetInterruptMask( void );
extern void vPortClearInterruptMask( uint32_t ulNewMaskValue );
extern void vPortInstallFreeRTOSVectorTable( void );
/* The I bit within the CPSR. */
#define portINTERRUPT_ENABLE_BIT ( 1 << 7 )
#define portINTERRUPT_ENABLE_BIT ( 1 << 7 )
/* In the absence of a priority mask register, these functions and macros
* globally enable and disable interrupts. */
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
#define portENABLE_INTERRUPTS() __asm volatile ( "CPSIE i \n"::: "memory" );
#define portDISABLE_INTERRUPTS() \
__asm volatile ( "CPSID i \n" \
"DSB \n" \
"ISB "::: "memory" );
globally enable and disable interrupts. */
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
#define portENABLE_INTERRUPTS() __asm volatile ( "CPSIE i \n" ::: "memory" );
#define portDISABLE_INTERRUPTS() __asm volatile ( "CPSID i \n" \
"DSB \n" \
"ISB " ::: "memory" );
__attribute__( ( always_inline ) ) static __inline uint32_t portINLINE_SET_INTERRUPT_MASK_FROM_ISR( void )
{
volatile uint32_t ulCPSR;
__attribute__( ( always_inline ) ) static __inline uint32_t portINLINE_SET_INTERRUPT_MASK_FROM_ISR( void )
{
volatile uint32_t ulCPSR;
__asm volatile ( "MRS %0, CPSR" : "=r" ( ulCPSR )::"memory" );
__asm volatile ( "MRS %0, CPSR" : "=r" (ulCPSR) :: "memory" );
ulCPSR &= portINTERRUPT_ENABLE_BIT;
portDISABLE_INTERRUPTS();
return ulCPSR;
}
ulCPSR &= portINTERRUPT_ENABLE_BIT;
portDISABLE_INTERRUPTS();
return ulCPSR;
}
#define portSET_INTERRUPT_MASK_FROM_ISR() portINLINE_SET_INTERRUPT_MASK_FROM_ISR()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) if( x == 0 ) portENABLE_INTERRUPTS()
#define portSET_INTERRUPT_MASK_FROM_ISR() portINLINE_SET_INTERRUPT_MASK_FROM_ISR()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) if( x == 0 ) portENABLE_INTERRUPTS()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. These are
* not required for this port but included in case common demo code that uses these
* macros is used. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
not required for this port but included in case common demo code that uses these
macros is used. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
/* Tickless idle/low power functionality. */
#ifndef portSUPPRESS_TICKS_AND_SLEEP
extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
#endif
#ifndef portSUPPRESS_TICKS_AND_SLEEP
extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
#endif
/* Prototype of the FreeRTOS tick handler. This must be installed as the
* handler for whichever peripheral is used to generate the RTOS tick. */
void FreeRTOS_Tick_Handler( void );
handler for whichever peripheral is used to generate the RTOS tick. */
void FreeRTOS_Tick_Handler( void );
/* Any task that uses the floating point unit MUST call vPortTaskUsesFPU()
* before any floating point instructions are executed. */
void vPortTaskUsesFPU( void );
#define portTASK_USES_FLOATING_POINT() vPortTaskUsesFPU()
before any floating point instructions are executed. */
void vPortTaskUsesFPU( void );
#define portTASK_USES_FLOATING_POINT() vPortTaskUsesFPU()
#define portLOWEST_INTERRUPT_PRIORITY ( ( ( uint32_t ) configUNIQUE_INTERRUPT_PRIORITIES ) - 1UL )
#define portLOWEST_USABLE_INTERRUPT_PRIORITY ( portLOWEST_INTERRUPT_PRIORITY - 1UL )
#define portLOWEST_INTERRUPT_PRIORITY ( ( ( uint32_t ) configUNIQUE_INTERRUPT_PRIORITIES ) - 1UL )
#define portLOWEST_USABLE_INTERRUPT_PRIORITY ( portLOWEST_INTERRUPT_PRIORITY - 1UL )
/* Architecture specific optimisations. */
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/*-----------------------------------------------------------*/
/*-----------------------------------------------------------*/
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) __builtin_clz( uxReadyPriorities ) )
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) __builtin_clz( uxReadyPriorities ) )
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
#define portNOP() __asm volatile ( "NOP" )
#define portINLINE __inline
#define portNOP() __asm volatile( "NOP" )
#define portINLINE __inline
#define portMEMORY_BARRIER() __asm volatile ( "" ::: "memory" )
#define portMEMORY_BARRIER() __asm volatile( "" ::: "memory" )
#ifdef __cplusplus
} /* extern C */
#endif
#ifdef __cplusplus
} /* extern C */
#endif
#endif /* PORTMACRO_H */

577
portable/GCC/ATMega323/port.c
View file

@ -25,14 +25,14 @@
* 1 tab == 4 spaces!
*/
/*
*
* Changes from V2.6.0
*
+ AVR port - Replaced the inb() and outb() functions with direct memory
+ access. This allows the port to be built with the 20050414 build of
+ WinAVR.
*/
/*
Changes from V2.6.0
+ AVR port - Replaced the inb() and outb() functions with direct memory
access. This allows the port to be built with the 20050414 build of
WinAVR.
*/
#include <stdlib.h>
#include <avr/interrupt.h>
@ -41,135 +41,135 @@
#include "task.h"
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the AVR port.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the AVR port.
*----------------------------------------------------------*/
/* Start tasks with interrupts enables. */
#define portFLAGS_INT_ENABLED ( ( StackType_t ) 0x80 )
#define portFLAGS_INT_ENABLED ( ( StackType_t ) 0x80 )
/* Hardware constants for timer 1. */
#define portCLEAR_COUNTER_ON_MATCH ( ( uint8_t ) 0x08 )
#define portPRESCALE_64 ( ( uint8_t ) 0x03 )
#define portCLOCK_PRESCALER ( ( uint32_t ) 64 )
#define portCOMPARE_MATCH_A_INTERRUPT_ENABLE ( ( uint8_t ) 0x10 )
#define portCLEAR_COUNTER_ON_MATCH ( ( uint8_t ) 0x08 )
#define portPRESCALE_64 ( ( uint8_t ) 0x03 )
#define portCLOCK_PRESCALER ( ( uint32_t ) 64 )
#define portCOMPARE_MATCH_A_INTERRUPT_ENABLE ( ( uint8_t ) 0x10 )
/*-----------------------------------------------------------*/
/* We require the address of the pxCurrentTCB variable, but don't want to know
* any details of its type. */
any details of its type. */
typedef void TCB_t;
extern volatile TCB_t * volatile pxCurrentTCB;
/*-----------------------------------------------------------*/
/*
/*
* Macro to save all the general purpose registers, the save the stack pointer
* into the TCB.
*
* The first thing we do is save the flags then disable interrupts. This is to
* guard our stack against having a context switch interrupt after we have already
* pushed the registers onto the stack - causing the 32 registers to be on the
* stack twice.
*
* into the TCB.
*
* The first thing we do is save the flags then disable interrupts. This is to
* guard our stack against having a context switch interrupt after we have already
* pushed the registers onto the stack - causing the 32 registers to be on the
* stack twice.
*
* r1 is set to zero as the compiler expects it to be thus, however some
* of the math routines make use of R1.
*
* of the math routines make use of R1.
*
* The interrupts will have been disabled during the call to portSAVE_CONTEXT()
* so we need not worry about reading/writing to the stack pointer.
* so we need not worry about reading/writing to the stack pointer.
*/
#define portSAVE_CONTEXT() \
asm volatile ( "push r0 \n\t"\
"in r0, __SREG__ \n\t"\
"cli \n\t"\
"push r0 \n\t"\
"push r1 \n\t"\
"clr r1 \n\t"\
"push r2 \n\t"\
"push r3 \n\t"\
"push r4 \n\t"\
"push r5 \n\t"\
"push r6 \n\t"\
"push r7 \n\t"\
"push r8 \n\t"\
"push r9 \n\t"\
"push r10 \n\t"\
"push r11 \n\t"\
"push r12 \n\t"\
"push r13 \n\t"\
"push r14 \n\t"\
"push r15 \n\t"\
"push r16 \n\t"\
"push r17 \n\t"\
"push r18 \n\t"\
"push r19 \n\t"\
"push r20 \n\t"\
"push r21 \n\t"\
"push r22 \n\t"\
"push r23 \n\t"\
"push r24 \n\t"\
"push r25 \n\t"\
"push r26 \n\t"\
"push r27 \n\t"\
"push r28 \n\t"\
"push r29 \n\t"\
"push r30 \n\t"\
"push r31 \n\t"\
"lds r26, pxCurrentTCB \n\t"\
"lds r27, pxCurrentTCB + 1 \n\t"\
"in r0, 0x3d \n\t"\
"st x+, r0 \n\t"\
"in r0, 0x3e \n\t"\
"st x+, r0 \n\t"\
);
#define portSAVE_CONTEXT() \
asm volatile ( "push r0 \n\t" \
"in r0, __SREG__ \n\t" \
"cli \n\t" \
"push r0 \n\t" \
"push r1 \n\t" \
"clr r1 \n\t" \
"push r2 \n\t" \
"push r3 \n\t" \
"push r4 \n\t" \
"push r5 \n\t" \
"push r6 \n\t" \
"push r7 \n\t" \
"push r8 \n\t" \
"push r9 \n\t" \
"push r10 \n\t" \
"push r11 \n\t" \
"push r12 \n\t" \
"push r13 \n\t" \
"push r14 \n\t" \
"push r15 \n\t" \
"push r16 \n\t" \
"push r17 \n\t" \
"push r18 \n\t" \
"push r19 \n\t" \
"push r20 \n\t" \
"push r21 \n\t" \
"push r22 \n\t" \
"push r23 \n\t" \
"push r24 \n\t" \
"push r25 \n\t" \
"push r26 \n\t" \
"push r27 \n\t" \
"push r28 \n\t" \
"push r29 \n\t" \
"push r30 \n\t" \
"push r31 \n\t" \
"lds r26, pxCurrentTCB \n\t" \
"lds r27, pxCurrentTCB + 1 \n\t" \
"in r0, 0x3d \n\t" \
"st x+, r0 \n\t" \
"in r0, 0x3e \n\t" \
"st x+, r0 \n\t" \
);
/*
/*
* Opposite to portSAVE_CONTEXT(). Interrupts will have been disabled during
* the context save so we can write to the stack pointer.
* the context save so we can write to the stack pointer.
*/
#define portRESTORE_CONTEXT() \
asm volatile ( "lds r26, pxCurrentTCB \n\t"\
"lds r27, pxCurrentTCB + 1 \n\t"\
"ld r28, x+ \n\t"\
"out __SP_L__, r28 \n\t"\
"ld r29, x+ \n\t"\
"out __SP_H__, r29 \n\t"\
"pop r31 \n\t"\
"pop r30 \n\t"\
"pop r29 \n\t"\
"pop r28 \n\t"\
"pop r27 \n\t"\
"pop r26 \n\t"\
"pop r25 \n\t"\
"pop r24 \n\t"\
"pop r23 \n\t"\
"pop r22 \n\t"\
"pop r21 \n\t"\
"pop r20 \n\t"\
"pop r19 \n\t"\
"pop r18 \n\t"\
"pop r17 \n\t"\
"pop r16 \n\t"\
"pop r15 \n\t"\
"pop r14 \n\t"\
"pop r13 \n\t"\
"pop r12 \n\t"\
"pop r11 \n\t"\
"pop r10 \n\t"\
"pop r9 \n\t"\
"pop r8 \n\t"\
"pop r7 \n\t"\
"pop r6 \n\t"\
"pop r5 \n\t"\
"pop r4 \n\t"\
"pop r3 \n\t"\
"pop r2 \n\t"\
"pop r1 \n\t"\
"pop r0 \n\t"\
"out __SREG__, r0 \n\t"\
"pop r0 \n\t"\
);
#define portRESTORE_CONTEXT() \
asm volatile ( "lds r26, pxCurrentTCB \n\t" \
"lds r27, pxCurrentTCB + 1 \n\t" \
"ld r28, x+ \n\t" \
"out __SP_L__, r28 \n\t" \
"ld r29, x+ \n\t" \
"out __SP_H__, r29 \n\t" \
"pop r31 \n\t" \
"pop r30 \n\t" \
"pop r29 \n\t" \
"pop r28 \n\t" \
"pop r27 \n\t" \
"pop r26 \n\t" \
"pop r25 \n\t" \
"pop r24 \n\t" \
"pop r23 \n\t" \
"pop r22 \n\t" \
"pop r21 \n\t" \
"pop r20 \n\t" \
"pop r19 \n\t" \
"pop r18 \n\t" \
"pop r17 \n\t" \
"pop r16 \n\t" \
"pop r15 \n\t" \
"pop r14 \n\t" \
"pop r13 \n\t" \
"pop r12 \n\t" \
"pop r11 \n\t" \
"pop r10 \n\t" \
"pop r9 \n\t" \
"pop r8 \n\t" \
"pop r7 \n\t" \
"pop r6 \n\t" \
"pop r5 \n\t" \
"pop r4 \n\t" \
"pop r3 \n\t" \
"pop r2 \n\t" \
"pop r1 \n\t" \
"pop r0 \n\t" \
"out __SREG__, r0 \n\t" \
"pop r0 \n\t" \
);
/*-----------------------------------------------------------*/
@ -179,147 +179,145 @@ extern volatile TCB_t * volatile pxCurrentTCB;
static void prvSetupTimerInterrupt( void );
/*-----------------------------------------------------------*/
/*
* See header file for description.
/*
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
uint16_t usAddress;
uint16_t usAddress;
/* Place a few bytes of known values on the bottom of the stack.
* This is just useful for debugging. */
/* Place a few bytes of known values on the bottom of the stack.
This is just useful for debugging. */
*pxTopOfStack = 0x11;
pxTopOfStack--;
*pxTopOfStack = 0x22;
pxTopOfStack--;
*pxTopOfStack = 0x33;
pxTopOfStack--;
*pxTopOfStack = 0x11;
pxTopOfStack--;
*pxTopOfStack = 0x22;
pxTopOfStack--;
*pxTopOfStack = 0x33;
pxTopOfStack--;
/* Simulate how the stack would look after a call to vPortYield() generated by
* the compiler. */
/* Simulate how the stack would look after a call to vPortYield() generated by
the compiler. */
/*lint -e950 -e611 -e923 Lint doesn't like this much - but nothing I can do about it. */
/*lint -e950 -e611 -e923 Lint doesn't like this much - but nothing I can do about it. */
/* The start of the task code will be popped off the stack last, so place
* it on first. */
usAddress = ( uint16_t ) pxCode;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
/* The start of the task code will be popped off the stack last, so place
it on first. */
usAddress = ( uint16_t ) pxCode;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
usAddress >>= 8;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
usAddress >>= 8;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
/* Next simulate the stack as if after a call to portSAVE_CONTEXT().
* portSAVE_CONTEXT places the flags on the stack immediately after r0
* to ensure the interrupts get disabled as soon as possible, and so ensuring
* the stack use is minimal should a context switch interrupt occur. */
*pxTopOfStack = ( StackType_t ) 0x00; /* R0 */
pxTopOfStack--;
*pxTopOfStack = portFLAGS_INT_ENABLED;
pxTopOfStack--;
/* Next simulate the stack as if after a call to portSAVE_CONTEXT().
portSAVE_CONTEXT places the flags on the stack immediately after r0
to ensure the interrupts get disabled as soon as possible, and so ensuring
the stack use is minimal should a context switch interrupt occur. */
*pxTopOfStack = ( StackType_t ) 0x00; /* R0 */
pxTopOfStack--;
*pxTopOfStack = portFLAGS_INT_ENABLED;
pxTopOfStack--;
/* Now the remaining registers. The compiler expects R1 to be 0. */
*pxTopOfStack = ( StackType_t ) 0x00; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x13; /* R13 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x14; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x15; /* R15 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x16; /* R16 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x17; /* R17 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x18; /* R18 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x19; /* R19 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x20; /* R20 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x21; /* R21 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x22; /* R22 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x23; /* R23 */
pxTopOfStack--;
/* Now the remaining registers. The compiler expects R1 to be 0. */
*pxTopOfStack = ( StackType_t ) 0x00; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04; /* R4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05; /* R5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06; /* R6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07; /* R7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08; /* R8 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09; /* R9 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x13; /* R13 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x14; /* R14 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x15; /* R15 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x16; /* R16 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x17; /* R17 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x18; /* R18 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x19; /* R19 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x20; /* R20 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x21; /* R21 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x22; /* R22 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x23; /* R23 */
pxTopOfStack--;
/* Place the parameter on the stack in the expected location. */
usAddress = ( uint16_t ) pvParameters;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
/* Place the parameter on the stack in the expected location. */
usAddress = ( uint16_t ) pvParameters;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
usAddress >>= 8;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
usAddress >>= 8;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x26; /* R26 X */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x27; /* R27 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x28; /* R28 Y */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x29; /* R29 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x30; /* R30 Z */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x031; /* R31 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x26; /* R26 X */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x27; /* R27 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x28; /* R28 Y */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x29; /* R29 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x30; /* R30 Z */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x031; /* R31 */
pxTopOfStack--;
/*lint +e950 +e611 +e923 */
/*lint +e950 +e611 +e923 */
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* Setup the hardware to generate the tick. */
prvSetupTimerInterrupt();
/* Setup the hardware to generate the tick. */
prvSetupTimerInterrupt();
/* Restore the context of the first task that is going to run. */
portRESTORE_CONTEXT();
/* Restore the context of the first task that is going to run. */
portRESTORE_CONTEXT();
/* Simulate a function call end as generated by the compiler. We will now
* jump to the start of the task the context of which we have just restored. */
asm volatile ( "ret" );
/* Simulate a function call end as generated by the compiler. We will now
jump to the start of the task the context of which we have just restored. */
asm volatile ( "ret" );
/* Should not get here. */
return pdTRUE;
/* Should not get here. */
return pdTRUE;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the AVR port will get stopped. If required simply
* disable the tick interrupt here. */
/* It is unlikely that the AVR port will get stopped. If required simply
disable the tick interrupt here. */
}
/*-----------------------------------------------------------*/
@ -327,36 +325,34 @@ void vPortEndScheduler( void )
* Manual context switch. The first thing we do is save the registers so we
* can use a naked attribute.
*/
void vPortYield( void ) __attribute__( ( naked ) );
void vPortYield( void ) __attribute__ ( ( naked ) );
void vPortYield( void )
{
portSAVE_CONTEXT();
vTaskSwitchContext();
portRESTORE_CONTEXT();
portSAVE_CONTEXT();
vTaskSwitchContext();
portRESTORE_CONTEXT();
asm volatile ( "ret" );
asm volatile ( "ret" );
}
/*-----------------------------------------------------------*/
/*
* Context switch function used by the tick. This must be identical to
* Context switch function used by the tick. This must be identical to
* vPortYield() from the call to vTaskSwitchContext() onwards. The only
* difference from vPortYield() is the tick count is incremented as the
* call comes from the tick ISR.
*/
void vPortYieldFromTick( void ) __attribute__( ( naked ) );
void vPortYieldFromTick( void ) __attribute__ ( ( naked ) );
void vPortYieldFromTick( void )
{
portSAVE_CONTEXT();
portSAVE_CONTEXT();
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
portRESTORE_CONTEXT();
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
portRESTORE_CONTEXT();
asm volatile ( "ret" );
asm volatile ( "ret" );
}
/*-----------------------------------------------------------*/
@ -365,63 +361,66 @@ void vPortYieldFromTick( void )
*/
static void prvSetupTimerInterrupt( void )
{
uint32_t ulCompareMatch;
uint8_t ucHighByte, ucLowByte;
uint32_t ulCompareMatch;
uint8_t ucHighByte, ucLowByte;
/* Using 16bit timer 1 to generate the tick. Correct fuses must be
* selected for the configCPU_CLOCK_HZ clock. */
/* Using 16bit timer 1 to generate the tick. Correct fuses must be
selected for the configCPU_CLOCK_HZ clock. */
ulCompareMatch = configCPU_CLOCK_HZ / configTICK_RATE_HZ;
ulCompareMatch = configCPU_CLOCK_HZ / configTICK_RATE_HZ;
/* We only have 16 bits so have to scale to get our required tick rate. */
ulCompareMatch /= portCLOCK_PRESCALER;
/* We only have 16 bits so have to scale to get our required tick rate. */
ulCompareMatch /= portCLOCK_PRESCALER;
/* Adjust for correct value. */
ulCompareMatch -= ( uint32_t ) 1;
/* Adjust for correct value. */
ulCompareMatch -= ( uint32_t ) 1;
/* Setup compare match value for compare match A. Interrupts are disabled
* before this is called so we need not worry here. */
ucLowByte = ( uint8_t ) ( ulCompareMatch & ( uint32_t ) 0xff );
ulCompareMatch >>= 8;
ucHighByte = ( uint8_t ) ( ulCompareMatch & ( uint32_t ) 0xff );
OCR1AH = ucHighByte;
OCR1AL = ucLowByte;
/* Setup compare match value for compare match A. Interrupts are disabled
before this is called so we need not worry here. */
ucLowByte = ( uint8_t ) ( ulCompareMatch & ( uint32_t ) 0xff );
ulCompareMatch >>= 8;
ucHighByte = ( uint8_t ) ( ulCompareMatch & ( uint32_t ) 0xff );
OCR1AH = ucHighByte;
OCR1AL = ucLowByte;
/* Setup clock source and compare match behaviour. */
ucLowByte = portCLEAR_COUNTER_ON_MATCH | portPRESCALE_64;
TCCR1B = ucLowByte;
/* Setup clock source and compare match behaviour. */
ucLowByte = portCLEAR_COUNTER_ON_MATCH | portPRESCALE_64;
TCCR1B = ucLowByte;
/* Enable the interrupt - this is okay as interrupt are currently globally
* disabled. */
ucLowByte = TIMSK;
ucLowByte |= portCOMPARE_MATCH_A_INTERRUPT_ENABLE;
TIMSK = ucLowByte;
/* Enable the interrupt - this is okay as interrupt are currently globally
disabled. */
ucLowByte = TIMSK;
ucLowByte |= portCOMPARE_MATCH_A_INTERRUPT_ENABLE;
TIMSK = ucLowByte;
}
/*-----------------------------------------------------------*/
#if configUSE_PREEMPTION == 1
/*
* Tick ISR for preemptive scheduler. We can use a naked attribute as
* the context is saved at the start of vPortYieldFromTick(). The tick
* count is incremented after the context is saved.
*/
void SIG_OUTPUT_COMPARE1A( void ) __attribute__( ( signal, naked ) );
void SIG_OUTPUT_COMPARE1A( void )
{
vPortYieldFromTick();
asm volatile ( "reti" );
}
/*
* Tick ISR for preemptive scheduler. We can use a naked attribute as
* the context is saved at the start of vPortYieldFromTick(). The tick
* count is incremented after the context is saved.
*/
void SIG_OUTPUT_COMPARE1A( void ) __attribute__ ( ( signal, naked ) );
void SIG_OUTPUT_COMPARE1A( void )
{
vPortYieldFromTick();
asm volatile ( "reti" );
}
#else
/*
* Tick ISR for the cooperative scheduler. All this does is increment the
* tick count. We don't need to switch context, this can only be done by
* manual calls to taskYIELD();
*/
void SIG_OUTPUT_COMPARE1A( void ) __attribute__( ( signal ) );
void SIG_OUTPUT_COMPARE1A( void )
{
xTaskIncrementTick();
}
#endif /* if configUSE_PREEMPTION == 1 */
/*
* Tick ISR for the cooperative scheduler. All this does is increment the
* tick count. We don't need to switch context, this can only be done by
* manual calls to taskYIELD();
*/
void SIG_OUTPUT_COMPARE1A( void ) __attribute__ ( ( signal ) );
void SIG_OUTPUT_COMPARE1A( void )
{
xTaskIncrementTick();
}
#endif

91
portable/GCC/ATMega323/portmacro.h
View file

@ -26,18 +26,18 @@
*/
/*
* Changes from V1.2.3
*
+ portCPU_CLOSK_HZ definition changed to 8MHz base 10, previously it
+ base 16.
*/
Changes from V1.2.3
+ portCPU_CLOSK_HZ definition changed to 8MHz base 10, previously it
base 16.
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -50,59 +50,58 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT int
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT int
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Critical section management. */
#define portENTER_CRITICAL() \
asm volatile ( "in __tmp_reg__, __SREG__"::); \
asm volatile ( "cli" ::); \
asm volatile ( "push __tmp_reg__"::)
#define portENTER_CRITICAL() asm volatile ( "in __tmp_reg__, __SREG__" :: ); \
asm volatile ( "cli" :: ); \
asm volatile ( "push __tmp_reg__" :: )
#define portEXIT_CRITICAL() \
asm volatile ( "pop __tmp_reg__"::); \
asm volatile ( "out __SREG__, __tmp_reg__"::)
#define portEXIT_CRITICAL() asm volatile ( "pop __tmp_reg__" :: ); \
asm volatile ( "out __SREG__, __tmp_reg__" :: )
#define portDISABLE_INTERRUPTS() asm volatile ( "cli" ::);
#define portENABLE_INTERRUPTS() asm volatile ( "sei" ::);
#define portDISABLE_INTERRUPTS() asm volatile ( "cli" :: );
#define portENABLE_INTERRUPTS() asm volatile ( "sei" :: );
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 1
#define portNOP() asm volatile ( "nop" );
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 1
#define portNOP() asm volatile ( "nop" );
/*-----------------------------------------------------------*/
/* Kernel utilities. */
extern void vPortYield( void ) __attribute__( ( naked ) );
#define portYIELD() vPortYield()
extern void vPortYield( void ) __attribute__ ( ( naked ) );
#define portYIELD() vPortYield()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

487
portable/GCC/AVR32_UC3/port.c
View file

@ -1,5 +1,4 @@
/*This file has been prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
*
* \brief FreeRTOS port source for AVR32 UC3.
@ -53,23 +52,23 @@
/* AVR32 UC3 includes. */
#include <avr32/io.h>
#include "gpio.h"
#if ( configTICK_USE_TC == 1 )
#include "tc.h"
#if( configTICK_USE_TC==1 )
#include "tc.h"
#endif
/* Constants required to setup the task context. */
#define portINITIAL_SR ( ( StackType_t ) 0x00400000 ) /* AVR32 : [M2:M0]=001 I1M=0 I0M=0, GM=0 */
#define portINSTRUCTION_SIZE ( ( StackType_t ) 0 )
#define portINITIAL_SR ( ( StackType_t ) 0x00400000 ) /* AVR32 : [M2:M0]=001 I1M=0 I0M=0, GM=0 */
#define portINSTRUCTION_SIZE ( ( StackType_t ) 0 )
/* Each task maintains its own critical nesting variable. */
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
volatile uint32_t ulCriticalNesting = 9999UL;
#if ( configTICK_USE_TC == 0 )
static void prvScheduleNextTick( void );
#if( configTICK_USE_TC==0 )
static void prvScheduleNextTick( void );
#else
static void prvClearTcInt( void );
static void prvClearTcInt( void );
#endif
/* Setup the timer to generate the tick interrupts. */
@ -85,53 +84,55 @@ static void prvSetupTimerInterrupt( void );
* vectors are not compatible with the SCALL management in the current FreeRTOS
* port. More low-level initializations are besides added here.
*/
void _init_startup( void )
void _init_startup(void)
{
/* Import the Exception Vector Base Address. */
extern void _evba;
/* Import the Exception Vector Base Address. */
extern void _evba;
#if configHEAP_INIT
extern void __heap_start__;
extern void __heap_end__;
BaseType_t * pxMem;
#endif
#if configHEAP_INIT
extern void __heap_start__;
extern void __heap_end__;
BaseType_t *pxMem;
#endif
/* Load the Exception Vector Base Address in the corresponding system register. */
Set_system_register( AVR32_EVBA, ( int ) &_evba );
/* Load the Exception Vector Base Address in the corresponding system register. */
Set_system_register( AVR32_EVBA, ( int ) &_evba );
/* Enable exceptions. */
ENABLE_ALL_EXCEPTIONS();
/* Enable exceptions. */
ENABLE_ALL_EXCEPTIONS();
/* Initialize interrupt handling. */
INTC_init_interrupts();
/* Initialize interrupt handling. */
INTC_init_interrupts();
#if configHEAP_INIT
/* Initialize the heap used by malloc. */
for( pxMem = &__heap_start__; pxMem < ( BaseType_t * ) &__heap_end__; )
{
*pxMem++ = 0xA5A5A5A5;
}
#endif
#if configHEAP_INIT
/* Give the used CPU clock frequency to Newlib, so it can work properly. */
set_cpu_hz( configCPU_CLOCK_HZ );
/* Initialize the heap used by malloc. */
for( pxMem = &__heap_start__; pxMem < ( BaseType_t * )&__heap_end__; )
{
*pxMem++ = 0xA5A5A5A5;
}
/* Code section present if and only if the debug trace is activated. */
#if configDBG
{
static const gpio_map_t DBG_USART_GPIO_MAP =
{
{ configDBG_USART_RX_PIN, configDBG_USART_RX_FUNCTION },
{ configDBG_USART_TX_PIN, configDBG_USART_TX_FUNCTION }
};
#endif
/* Initialize the USART used for the debug trace with the configured parameters. */
set_usart_base( ( void * ) configDBG_USART );
gpio_enable_module( DBG_USART_GPIO_MAP,
sizeof( DBG_USART_GPIO_MAP ) / sizeof( DBG_USART_GPIO_MAP[ 0 ] ) );
usart_init( configDBG_USART_BAUDRATE );
}
#endif /* if configDBG */
/* Give the used CPU clock frequency to Newlib, so it can work properly. */
set_cpu_hz( configCPU_CLOCK_HZ );
/* Code section present if and only if the debug trace is activated. */
#if configDBG
{
static const gpio_map_t DBG_USART_GPIO_MAP =
{
{ configDBG_USART_RX_PIN, configDBG_USART_RX_FUNCTION },
{ configDBG_USART_TX_PIN, configDBG_USART_TX_FUNCTION }
};
/* Initialize the USART used for the debug trace with the configured parameters. */
set_usart_base( ( void * ) configDBG_USART );
gpio_enable_module( DBG_USART_GPIO_MAP,
sizeof( DBG_USART_GPIO_MAP ) / sizeof( DBG_USART_GPIO_MAP[0] ) );
usart_init( configDBG_USART_BAUDRATE );
}
#endif
}
/*-----------------------------------------------------------*/
@ -154,9 +155,9 @@ void _init_startup( void )
* safe section as memory allocation management uses global data.
* See the aforementioned details.
*/
void __malloc_lock( struct _reent * ptr )
void __malloc_lock(struct _reent *ptr)
{
vTaskSuspendAll();
vTaskSuspendAll();
}
/*
@ -164,96 +165,92 @@ void __malloc_lock( struct _reent * ptr )
* a safe section as memory allocation management uses global data.
* See the aforementioned details.
*/
void __malloc_unlock( struct _reent * ptr )
void __malloc_unlock(struct _reent *ptr)
{
xTaskResumeAll();
xTaskResumeAll();
}
/*-----------------------------------------------------------*/
/* Added as there is no such function in FreeRTOS. */
void * pvPortRealloc( void * pv,
size_t xWantedSize )
void *pvPortRealloc( void *pv, size_t xWantedSize )
{
void * pvReturn;
void *pvReturn;
vTaskSuspendAll();
{
pvReturn = realloc( pv, xWantedSize );
}
xTaskResumeAll();
vTaskSuspendAll();
{
pvReturn = realloc( pv, xWantedSize );
}
xTaskResumeAll();
return pvReturn;
return pvReturn;
}
/*-----------------------------------------------------------*/
/* The cooperative scheduler requires a normal IRQ service routine to
* simply increment the system tick. */
simply increment the system tick. */
/* The preemptive scheduler is defined as "naked" as the full context is saved
* on entry as part of the context switch. */
__attribute__( ( __naked__ ) ) static void vTick( void )
on entry as part of the context switch. */
__attribute__((__naked__)) static void vTick( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT_OS_INT();
/* Save the context of the interrupted task. */
portSAVE_CONTEXT_OS_INT();
#if ( configTICK_USE_TC == 1 )
/* Clear the interrupt flag. */
prvClearTcInt();
#else
#if( configTICK_USE_TC==1 )
/* Clear the interrupt flag. */
prvClearTcInt();
#else
/* Schedule the COUNT&COMPARE match interrupt in (configCPU_CLOCK_HZ/configTICK_RATE_HZ)
clock cycles from now. */
prvScheduleNextTick();
#endif
/* Schedule the COUNT&COMPARE match interrupt in (configCPU_CLOCK_HZ/configTICK_RATE_HZ)
* clock cycles from now. */
prvScheduleNextTick();
#endif
/* Because FreeRTOS is not supposed to run with nested interrupts, put all OS
calls in a critical section . */
portENTER_CRITICAL();
xTaskIncrementTick();
portEXIT_CRITICAL();
/* Because FreeRTOS is not supposed to run with nested interrupts, put all OS
* calls in a critical section . */
portENTER_CRITICAL();
xTaskIncrementTick();
portEXIT_CRITICAL();
/* Restore the context of the "elected task". */
portRESTORE_CONTEXT_OS_INT();
/* Restore the context of the "elected task". */
portRESTORE_CONTEXT_OS_INT();
}
/*-----------------------------------------------------------*/
__attribute__( ( __naked__ ) ) void SCALLYield( void )
__attribute__((__naked__)) void SCALLYield( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT_SCALL();
vTaskSwitchContext();
portRESTORE_CONTEXT_SCALL();
/* Save the context of the interrupted task. */
portSAVE_CONTEXT_SCALL();
vTaskSwitchContext();
portRESTORE_CONTEXT_SCALL();
}
/*-----------------------------------------------------------*/
/* The code generated by the GCC compiler uses the stack in different ways at
* different optimisation levels. The interrupt flags can therefore not always
* be saved to the stack. Instead the critical section nesting level is stored
* in a variable, which is then saved as part of the stack context. */
__attribute__( ( __noinline__ ) ) void vPortEnterCritical( void )
different optimisation levels. The interrupt flags can therefore not always
be saved to the stack. Instead the critical section nesting level is stored
in a variable, which is then saved as part of the stack context. */
__attribute__((__noinline__)) void vPortEnterCritical( void )
{
/* Disable interrupts */
portDISABLE_INTERRUPTS();
/* Disable interrupts */
portDISABLE_INTERRUPTS();
/* Now interrupts are disabled ulCriticalNesting can be accessed
* directly. Increment ulCriticalNesting to keep a count of how many times
* portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* Now interrupts are disabled ulCriticalNesting can be accessed
directly. Increment ulCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
}
/*-----------------------------------------------------------*/
__attribute__( ( __noinline__ ) ) void vPortExitCritical( void )
__attribute__((__noinline__)) void vPortExitCritical( void )
{
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
ulCriticalNesting--;
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable all interrupt/exception. */
portENABLE_INTERRUPTS();
}
}
if(ulCriticalNesting > portNO_CRITICAL_NESTING)
{
ulCriticalNesting--;
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable all interrupt/exception. */
portENABLE_INTERRUPTS();
}
}
}
/*-----------------------------------------------------------*/
@ -263,182 +260,176 @@ __attribute__( ( __noinline__ ) ) void vPortExitCritical( void )
*
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro. */
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro. */
/* When the task starts, it will expect to find the function parameter in R12. */
pxTopOfStack--;
*pxTopOfStack-- = ( StackType_t ) 0x08080808; /* R8 */
*pxTopOfStack-- = ( StackType_t ) 0x09090909; /* R9 */
*pxTopOfStack-- = ( StackType_t ) 0x0A0A0A0A; /* R10 */
*pxTopOfStack-- = ( StackType_t ) 0x0B0B0B0B; /* R11 */
*pxTopOfStack-- = ( StackType_t ) pvParameters; /* R12 */
*pxTopOfStack-- = ( StackType_t ) 0xDEADBEEF; /* R14/LR */
*pxTopOfStack-- = ( StackType_t ) pxCode + portINSTRUCTION_SIZE; /* R15/PC */
*pxTopOfStack-- = ( StackType_t ) portINITIAL_SR; /* SR */
*pxTopOfStack-- = ( StackType_t ) 0xFF0000FF; /* R0 */
*pxTopOfStack-- = ( StackType_t ) 0x01010101; /* R1 */
*pxTopOfStack-- = ( StackType_t ) 0x02020202; /* R2 */
*pxTopOfStack-- = ( StackType_t ) 0x03030303; /* R3 */
*pxTopOfStack-- = ( StackType_t ) 0x04040404; /* R4 */
*pxTopOfStack-- = ( StackType_t ) 0x05050505; /* R5 */
*pxTopOfStack-- = ( StackType_t ) 0x06060606; /* R6 */
*pxTopOfStack-- = ( StackType_t ) 0x07070707; /* R7 */
*pxTopOfStack = ( StackType_t ) portNO_CRITICAL_NESTING; /* ulCriticalNesting */
/* When the task starts, it will expect to find the function parameter in R12. */
pxTopOfStack--;
*pxTopOfStack-- = ( StackType_t ) 0x08080808; /* R8 */
*pxTopOfStack-- = ( StackType_t ) 0x09090909; /* R9 */
*pxTopOfStack-- = ( StackType_t ) 0x0A0A0A0A; /* R10 */
*pxTopOfStack-- = ( StackType_t ) 0x0B0B0B0B; /* R11 */
*pxTopOfStack-- = ( StackType_t ) pvParameters; /* R12 */
*pxTopOfStack-- = ( StackType_t ) 0xDEADBEEF; /* R14/LR */
*pxTopOfStack-- = ( StackType_t ) pxCode + portINSTRUCTION_SIZE; /* R15/PC */
*pxTopOfStack-- = ( StackType_t ) portINITIAL_SR; /* SR */
*pxTopOfStack-- = ( StackType_t ) 0xFF0000FF; /* R0 */
*pxTopOfStack-- = ( StackType_t ) 0x01010101; /* R1 */
*pxTopOfStack-- = ( StackType_t ) 0x02020202; /* R2 */
*pxTopOfStack-- = ( StackType_t ) 0x03030303; /* R3 */
*pxTopOfStack-- = ( StackType_t ) 0x04040404; /* R4 */
*pxTopOfStack-- = ( StackType_t ) 0x05050505; /* R5 */
*pxTopOfStack-- = ( StackType_t ) 0x06060606; /* R6 */
*pxTopOfStack-- = ( StackType_t ) 0x07070707; /* R7 */
*pxTopOfStack = ( StackType_t ) portNO_CRITICAL_NESTING; /* ulCriticalNesting */
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* Start the timer that generates the tick ISR. Interrupts are disabled
* here already. */
prvSetupTimerInterrupt();
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Start the first task. */
portRESTORE_CONTEXT();
/* Start the first task. */
portRESTORE_CONTEXT();
/* Should not get here! */
return 0;
/* Should not get here! */
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the AVR32 port will require this function as there
* is nothing to return to. */
/* It is unlikely that the AVR32 port will require this function as there
is nothing to return to. */
}
/*-----------------------------------------------------------*/
/* Schedule the COUNT&COMPARE match interrupt in (configCPU_CLOCK_HZ/configTICK_RATE_HZ)
* clock cycles from now. */
#if ( configTICK_USE_TC == 0 )
static void prvScheduleFirstTick( void )
{
uint32_t lCycles;
clock cycles from now. */
#if( configTICK_USE_TC==0 )
static void prvScheduleFirstTick(void)
{
uint32_t lCycles;
lCycles = Get_system_register( AVR32_COUNT );
lCycles += ( configCPU_CLOCK_HZ / configTICK_RATE_HZ );
lCycles = Get_system_register(AVR32_COUNT);
lCycles += (configCPU_CLOCK_HZ/configTICK_RATE_HZ);
// If lCycles ends up to be 0, make it 1 so that the COMPARE and exception
// generation feature does not get disabled.
if(0 == lCycles)
{
lCycles++;
}
Set_system_register(AVR32_COMPARE, lCycles);
}
__attribute__((__noinline__)) static void prvScheduleNextTick(void)
{
uint32_t lCycles, lCount;
/* If lCycles ends up to be 0, make it 1 so that the COMPARE and exception */
/* generation feature does not get disabled. */
if( 0 == lCycles )
{
lCycles++;
}
Set_system_register( AVR32_COMPARE, lCycles );
}
__attribute__( ( __noinline__ ) ) static void prvScheduleNextTick( void )
{
uint32_t lCycles, lCount;
lCycles = Get_system_register( AVR32_COMPARE );
lCycles += ( configCPU_CLOCK_HZ / configTICK_RATE_HZ );
/* If lCycles ends up to be 0, make it 1 so that the COMPARE and exception */
/* generation feature does not get disabled. */
if( 0 == lCycles )
{
lCycles++;
}
lCount = Get_system_register( AVR32_COUNT );
if( lCycles < lCount )
{ /* We missed a tick, recover for the next. */
lCycles += ( configCPU_CLOCK_HZ / configTICK_RATE_HZ );
}
Set_system_register( AVR32_COMPARE, lCycles );
}
#else /* if ( configTICK_USE_TC == 0 ) */
__attribute__( ( __noinline__ ) ) static void prvClearTcInt( void )
{
AVR32_TC.channel[ configTICK_TC_CHANNEL ].sr;
}
#endif /* if ( configTICK_USE_TC == 0 ) */
lCycles = Get_system_register(AVR32_COMPARE);
lCycles += (configCPU_CLOCK_HZ/configTICK_RATE_HZ);
// If lCycles ends up to be 0, make it 1 so that the COMPARE and exception
// generation feature does not get disabled.
if(0 == lCycles)
{
lCycles++;
}
lCount = Get_system_register(AVR32_COUNT);
if( lCycles < lCount )
{ // We missed a tick, recover for the next.
lCycles += (configCPU_CLOCK_HZ/configTICK_RATE_HZ);
}
Set_system_register(AVR32_COMPARE, lCycles);
}
#else
__attribute__((__noinline__)) static void prvClearTcInt(void)
{
AVR32_TC.channel[configTICK_TC_CHANNEL].sr;
}
#endif
/*-----------------------------------------------------------*/
/* Setup the timer to generate the tick interrupts. */
static void prvSetupTimerInterrupt( void )
static void prvSetupTimerInterrupt(void)
{
#if ( configTICK_USE_TC == 1 )
volatile avr32_tc_t * tc = &AVR32_TC;
#if( configTICK_USE_TC==1 )
/* Options for waveform genration. */
tc_waveform_opt_t waveform_opt =
{
.channel = configTICK_TC_CHANNEL, /* Channel selection. */
volatile avr32_tc_t *tc = &AVR32_TC;
.bswtrg = TC_EVT_EFFECT_NOOP, /* Software trigger effect on TIOB. */
.beevt = TC_EVT_EFFECT_NOOP, /* External event effect on TIOB. */
.bcpc = TC_EVT_EFFECT_NOOP, /* RC compare effect on TIOB. */
.bcpb = TC_EVT_EFFECT_NOOP, /* RB compare effect on TIOB. */
// Options for waveform genration.
tc_waveform_opt_t waveform_opt =
{
.channel = configTICK_TC_CHANNEL, /* Channel selection. */
.aswtrg = TC_EVT_EFFECT_NOOP, /* Software trigger effect on TIOA. */
.aeevt = TC_EVT_EFFECT_NOOP, /* External event effect on TIOA. */
.acpc = TC_EVT_EFFECT_NOOP, /* RC compare effect on TIOA: toggle. */
.acpa = TC_EVT_EFFECT_NOOP, /* RA compare effect on TIOA: toggle (other possibilities are none, set and clear). */
.bswtrg = TC_EVT_EFFECT_NOOP, /* Software trigger effect on TIOB. */
.beevt = TC_EVT_EFFECT_NOOP, /* External event effect on TIOB. */
.bcpc = TC_EVT_EFFECT_NOOP, /* RC compare effect on TIOB. */
.bcpb = TC_EVT_EFFECT_NOOP, /* RB compare effect on TIOB. */
.wavsel = TC_WAVEFORM_SEL_UP_MODE_RC_TRIGGER, /* Waveform selection: Up mode without automatic trigger on RC compare. */
.enetrg = FALSE, /* External event trigger enable. */
.eevt = 0, /* External event selection. */
.eevtedg = TC_SEL_NO_EDGE, /* External event edge selection. */
.cpcdis = FALSE, /* Counter disable when RC compare. */
.cpcstop = FALSE, /* Counter clock stopped with RC compare. */
.aswtrg = TC_EVT_EFFECT_NOOP, /* Software trigger effect on TIOA. */
.aeevt = TC_EVT_EFFECT_NOOP, /* External event effect on TIOA. */
.acpc = TC_EVT_EFFECT_NOOP, /* RC compare effect on TIOA: toggle. */
.acpa = TC_EVT_EFFECT_NOOP, /* RA compare effect on TIOA: toggle (other possibilities are none, set and clear). */
.burst = FALSE, /* Burst signal selection. */
.clki = FALSE, /* Clock inversion. */
.tcclks = TC_CLOCK_SOURCE_TC2 /* Internal source clock 2. */
};
.wavsel = TC_WAVEFORM_SEL_UP_MODE_RC_TRIGGER,/* Waveform selection: Up mode without automatic trigger on RC compare. */
.enetrg = FALSE, /* External event trigger enable. */
.eevt = 0, /* External event selection. */
.eevtedg = TC_SEL_NO_EDGE, /* External event edge selection. */
.cpcdis = FALSE, /* Counter disable when RC compare. */
.cpcstop = FALSE, /* Counter clock stopped with RC compare. */
tc_interrupt_t tc_interrupt =
{
.etrgs = 0,
.ldrbs = 0,
.ldras = 0,
.cpcs = 1,
.cpbs = 0,
.cpas = 0,
.lovrs = 0,
.covfs = 0,
};
#endif /* if ( configTICK_USE_TC == 1 ) */
.burst = FALSE, /* Burst signal selection. */
.clki = FALSE, /* Clock inversion. */
.tcclks = TC_CLOCK_SOURCE_TC2 /* Internal source clock 2. */
};
/* Disable all interrupt/exception. */
portDISABLE_INTERRUPTS();
tc_interrupt_t tc_interrupt =
{
.etrgs=0,
.ldrbs=0,
.ldras=0,
.cpcs =1,
.cpbs =0,
.cpas =0,
.lovrs=0,
.covfs=0,
};
/* Register the compare interrupt handler to the interrupt controller and
* enable the compare interrupt. */
#endif
#if ( configTICK_USE_TC == 1 )
{
INTC_register_interrupt( &vTick, configTICK_TC_IRQ, INT0 );
/* Disable all interrupt/exception. */
portDISABLE_INTERRUPTS();
/* Initialize the timer/counter. */
tc_init_waveform( tc, &waveform_opt );
/* Register the compare interrupt handler to the interrupt controller and
enable the compare interrupt. */
/* Set the compare triggers.
* Remember TC counter is 16-bits, so counting second is not possible!
* That's why we configure it to count ms. */
tc_write_rc( tc, configTICK_TC_CHANNEL, ( configPBA_CLOCK_HZ / 4 ) / configTICK_RATE_HZ );
#if( configTICK_USE_TC==1 )
{
INTC_register_interrupt(&vTick, configTICK_TC_IRQ, INT0);
tc_configure_interrupts( tc, configTICK_TC_CHANNEL, &tc_interrupt );
/* Initialize the timer/counter. */
tc_init_waveform(tc, &waveform_opt);
/* Start the timer/counter. */
tc_start( tc, configTICK_TC_CHANNEL );
}
#else /* if ( configTICK_USE_TC == 1 ) */
{
INTC_register_interrupt( &vTick, AVR32_CORE_COMPARE_IRQ, INT0 );
prvScheduleFirstTick();
}
#endif /* if ( configTICK_USE_TC == 1 ) */
/* Set the compare triggers.
Remember TC counter is 16-bits, so counting second is not possible!
That's why we configure it to count ms. */
tc_write_rc( tc, configTICK_TC_CHANNEL, ( configPBA_CLOCK_HZ / 4) / configTICK_RATE_HZ );
tc_configure_interrupts( tc, configTICK_TC_CHANNEL, &tc_interrupt );
/* Start the timer/counter. */
tc_start(tc, configTICK_TC_CHANNEL);
}
#else
{
INTC_register_interrupt(&vTick, AVR32_CORE_COMPARE_IRQ, INT0);
prvScheduleFirstTick();
}
#endif
}

972
portable/GCC/AVR32_UC3/portmacro.h
View file

File diff suppressed because it is too large Load diff

297
portable/GCC/AVR_AVRDx/port.c
View file

@ -23,7 +23,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#include <stdlib.h>
@ -34,18 +33,18 @@
#include "task.h"
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the AVR port.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the AVR port.
*----------------------------------------------------------*/
/* Start tasks with interrupts enables. */
#define portFLAGS_INT_ENABLED ((StackType_t) 0x80)
#define portFLAGS_INT_ENABLED ( ( StackType_t ) 0x80 )
/*-----------------------------------------------------------*/
/* We require the address of the pxCurrentTCB variable, but don't want to know
any details of its type. */
* any details of its type. */
typedef void RTOS_TCB_t;
extern volatile RTOS_TCB_t *volatile pxCurrentTCB;
extern volatile RTOS_TCB_t * volatile pxCurrentTCB;
/*-----------------------------------------------------------*/
@ -65,161 +64,163 @@ extern volatile RTOS_TCB_t *volatile pxCurrentTCB;
* so we need not worry about reading/writing to the stack pointer.
*/
#define portSAVE_CONTEXT() \
asm volatile("push r0 \n\t" \
"in r0, __SREG__ \n\t" \
"cli \n\t" \
"push r0 \n\t" \
"in r0, __RAMPZ__ \n\t" \
"push r0 \n\t" \
"push r1 \n\t" \
"clr r1 \n\t" \
"push r2 \n\t" \
"push r3 \n\t" \
"push r4 \n\t" \
"push r5 \n\t" \
"push r6 \n\t" \
"push r7 \n\t" \
"push r8 \n\t" \
"push r9 \n\t" \
"push r10 \n\t" \
"push r11 \n\t" \
"push r12 \n\t" \
"push r13 \n\t" \
"push r14 \n\t" \
"push r15 \n\t" \
"push r16 \n\t" \
"push r17 \n\t" \
"push r18 \n\t" \
"push r19 \n\t" \
"push r20 \n\t" \
"push r21 \n\t" \
"push r22 \n\t" \
"push r23 \n\t" \
"push r24 \n\t" \
"push r25 \n\t" \
"push r26 \n\t" \
"push r27 \n\t" \
"push r28 \n\t" \
"push r29 \n\t" \
"push r30 \n\t" \
"push r31 \n\t" \
"lds r26, pxCurrentTCB \n\t" \
"lds r27, pxCurrentTCB + 1 \n\t" \
"in r0, __SP_L__ \n\t" \
"st x+, r0 \n\t" \
"in r0, __SP_H__ \n\t" \
"st x+, r0 \n\t");
#define portSAVE_CONTEXT() \
asm volatile ( "push r0 \n\t" \
"in r0, __SREG__ \n\t" \
"cli \n\t" \
"push r0 \n\t" \
"in r0, __RAMPZ__ \n\t" \
"push r0 \n\t" \
"push r1 \n\t" \
"clr r1 \n\t" \
"push r2 \n\t" \
"push r3 \n\t" \
"push r4 \n\t" \
"push r5 \n\t" \
"push r6 \n\t" \
"push r7 \n\t" \
"push r8 \n\t" \
"push r9 \n\t" \
"push r10 \n\t" \
"push r11 \n\t" \
"push r12 \n\t" \
"push r13 \n\t" \
"push r14 \n\t" \
"push r15 \n\t" \
"push r16 \n\t" \
"push r17 \n\t" \
"push r18 \n\t" \
"push r19 \n\t" \
"push r20 \n\t" \
"push r21 \n\t" \
"push r22 \n\t" \
"push r23 \n\t" \
"push r24 \n\t" \
"push r25 \n\t" \
"push r26 \n\t" \
"push r27 \n\t" \
"push r28 \n\t" \
"push r29 \n\t" \
"push r30 \n\t" \
"push r31 \n\t" \
"lds r26, pxCurrentTCB \n\t" \
"lds r27, pxCurrentTCB + 1 \n\t" \
"in r0, __SP_L__ \n\t" \
"st x+, r0 \n\t" \
"in r0, __SP_H__ \n\t" \
"st x+, r0 \n\t" );
/*
* Opposite to portSAVE_CONTEXT(). Interrupts will have been disabled during
* the context save so we can write to the stack pointer.
*/
#define portRESTORE_CONTEXT() \
asm volatile("lds r26, pxCurrentTCB \n\t" \
"lds r27, pxCurrentTCB + 1 \n\t" \
"ld r28, x+ \n\t" \
"out __SP_L__, r28 \n\t" \
"ld r29, x+ \n\t" \
"out __SP_H__, r29 \n\t" \
"pop r31 \n\t" \
"pop r30 \n\t" \
"pop r29 \n\t" \
"pop r28 \n\t" \
"pop r27 \n\t" \
"pop r26 \n\t" \
"pop r25 \n\t" \
"pop r24 \n\t" \
"pop r23 \n\t" \
"pop r22 \n\t" \
"pop r21 \n\t" \
"pop r20 \n\t" \
"pop r19 \n\t" \
"pop r18 \n\t" \
"pop r17 \n\t" \
"pop r16 \n\t" \
"pop r15 \n\t" \
"pop r14 \n\t" \
"pop r13 \n\t" \
"pop r12 \n\t" \
"pop r11 \n\t" \
"pop r10 \n\t" \
"pop r9 \n\t" \
"pop r8 \n\t" \
"pop r7 \n\t" \
"pop r6 \n\t" \
"pop r5 \n\t" \
"pop r4 \n\t" \
"pop r3 \n\t" \
"pop r2 \n\t" \
"pop r1 \n\t" \
"pop r0 \n\t" \
"out __RAMPZ__, r0 \n\t" \
"pop r0 \n\t" \
"out __SREG__, r0 \n\t" \
"pop r0 \n\t");
#define portRESTORE_CONTEXT() \
asm volatile ( "lds r26, pxCurrentTCB \n\t" \
"lds r27, pxCurrentTCB + 1 \n\t" \
"ld r28, x+ \n\t" \
"out __SP_L__, r28 \n\t" \
"ld r29, x+ \n\t" \
"out __SP_H__, r29 \n\t" \
"pop r31 \n\t" \
"pop r30 \n\t" \
"pop r29 \n\t" \
"pop r28 \n\t" \
"pop r27 \n\t" \
"pop r26 \n\t" \
"pop r25 \n\t" \
"pop r24 \n\t" \
"pop r23 \n\t" \
"pop r22 \n\t" \
"pop r21 \n\t" \
"pop r20 \n\t" \
"pop r19 \n\t" \
"pop r18 \n\t" \
"pop r17 \n\t" \
"pop r16 \n\t" \
"pop r15 \n\t" \
"pop r14 \n\t" \
"pop r13 \n\t" \
"pop r12 \n\t" \
"pop r11 \n\t" \
"pop r10 \n\t" \
"pop r9 \n\t" \
"pop r8 \n\t" \
"pop r7 \n\t" \
"pop r6 \n\t" \
"pop r5 \n\t" \
"pop r4 \n\t" \
"pop r3 \n\t" \
"pop r2 \n\t" \
"pop r1 \n\t" \
"pop r0 \n\t" \
"out __RAMPZ__, r0 \n\t" \
"pop r0 \n\t" \
"out __SREG__, r0 \n\t" \
"pop r0 \n\t" );
/*-----------------------------------------------------------*/
/*
* Perform hardware setup to enable ticks from timer.
*/
static void prvSetupTimerInterrupt(void);
static void prvSetupTimerInterrupt( void );
/*-----------------------------------------------------------*/
/*
* See header file for description.
*/
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters)
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
{
uint16_t usAddress;
/*lint -e950 -e611 -e923 Lint doesn't like this much - but nothing I can do about it. */
/* Place a few bytes of known values on the bottom of the stack.
This is just useful for debugging. Uncomment if needed. */
// *pxTopOfStack = 0x11;
// pxTopOfStack--;
// *pxTopOfStack = 0x22;
// pxTopOfStack--;
// *pxTopOfStack = 0x33;
// pxTopOfStack--;
* This is just useful for debugging. Uncomment if needed. */
/* *pxTopOfStack = 0x11; */
/* pxTopOfStack--; */
/* *pxTopOfStack = 0x22; */
/* pxTopOfStack--; */
/* *pxTopOfStack = 0x33; */
/* pxTopOfStack--; */
/* The start of the task code will be popped off the stack last, so place
it on first. */
usAddress = (uint16_t)pxCode;
*pxTopOfStack = (StackType_t)(usAddress & (uint16_t)0x00ff);
* it on first. */
usAddress = ( uint16_t ) pxCode;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
usAddress >>= 8;
*pxTopOfStack = (StackType_t)(usAddress & (uint16_t)0x00ff);
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
/* Next simulate the stack as if after a call to portSAVE_CONTEXT().
portSAVE_CONTEXT places the flags on the stack immediately after r0
to ensure the interrupts get disabled as soon as possible, and so ensuring
the stack use is minimal should a context switch interrupt occur. */
*pxTopOfStack = (StackType_t)0x00; /* R0 */
* portSAVE_CONTEXT places the flags on the stack immediately after r0
* to ensure the interrupts get disabled as soon as possible, and so ensuring
* the stack use is minimal should a context switch interrupt occur. */
*pxTopOfStack = ( StackType_t ) 0x00; /* R0 */
pxTopOfStack--;
*pxTopOfStack = portFLAGS_INT_ENABLED;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x00; /* RAMPZ */
*pxTopOfStack = ( StackType_t ) 0x00; /* RAMPZ */
pxTopOfStack--;
/* Now the remaining registers. The compiler expects R1 to be 0. */
*pxTopOfStack = (StackType_t)0x00; /* R1 */
*pxTopOfStack = ( StackType_t ) 0x00; /* R1 */
/* Leave R2 - R23 untouched */
pxTopOfStack -= 23;
/* Place the parameter on the stack in the expected location. */
usAddress = (uint16_t)pvParameters;
*pxTopOfStack = (StackType_t)(usAddress & (uint16_t)0x00ff);
usAddress = ( uint16_t ) pvParameters;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
usAddress >>= 8;
*pxTopOfStack = (StackType_t)(usAddress & (uint16_t)0x00ff);
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
/* Leave register R26 - R31 untouched */
pxTopOfStack -= 7;
@ -230,7 +231,7 @@ StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxC
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler(void)
BaseType_t xPortStartScheduler( void )
{
/* Setup the hardware to generate the tick. */
prvSetupTimerInterrupt();
@ -239,15 +240,15 @@ BaseType_t xPortStartScheduler(void)
portRESTORE_CONTEXT();
/* Simulate a function call end as generated by the compiler. We will now
jump to the start of the task the context of which we have just restored. */
asm volatile("ret");
* jump to the start of the task the context of which we have just restored. */
asm volatile ( "ret" );
/* Should not get here. */
return pdTRUE;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler(void)
void vPortEndScheduler( void )
{
/* vPortEndScheduler is not implemented in this port. */
}
@ -257,13 +258,13 @@ void vPortEndScheduler(void)
* Manual context switch. The first thing we do is save the registers so we
* can use a naked attribute.
*/
void vPortYield(void) __attribute__((naked));
void vPortYield(void)
void vPortYield( void ) __attribute__( ( naked ) );
void vPortYield( void )
{
portSAVE_CONTEXT();
vTaskSwitchContext();
portRESTORE_CONTEXT();
asm volatile("ret");
asm volatile ( "ret" );
}
/*-----------------------------------------------------------*/
@ -271,13 +272,13 @@ void vPortYield(void)
* Manual context switch callable from ISRs. The first thing
* we do is save the registers so we can use a naked attribute.
*/
void vPortYieldFromISR(void) __attribute__((naked));
void vPortYieldFromISR(void)
void vPortYieldFromISR( void ) __attribute__( ( naked ) );
void vPortYieldFromISR( void )
{
portSAVE_CONTEXT();
vTaskSwitchContext();
portRESTORE_CONTEXT();
asm volatile("reti");
asm volatile ( "reti" );
}
/*-----------------------------------------------------------*/
@ -287,24 +288,26 @@ void vPortYieldFromISR(void)
* difference from vPortYield() is the tick count is incremented as the
* call comes from the tick ISR.
*/
void vPortYieldFromTick(void) __attribute__((naked));
void vPortYieldFromTick(void)
void vPortYieldFromTick( void ) __attribute__( ( naked ) );
void vPortYieldFromTick( void )
{
portSAVE_CONTEXT();
if (xTaskIncrementTick() != pdFALSE) {
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
portRESTORE_CONTEXT();
asm volatile("reti");
asm volatile ( "reti" );
}
/*-----------------------------------------------------------*/
/*
* Setup timer to generate a tick interrupt.
*/
static void prvSetupTimerInterrupt(void)
static void prvSetupTimerInterrupt( void )
{
TICK_init();
}
@ -317,26 +320,26 @@ static void prvSetupTimerInterrupt(void)
* the context is saved at the start of vPortYieldFromTick(). The tick
* count is incremented after the context is saved.
*/
ISR(TICK_INT_vect, ISR_NAKED)
{
/* Clear tick interrupt flag. */
CLR_INT(INT_FLAGS, INT_MASK);
ISR( TICK_INT_vect, ISR_NAKED )
{
/* Clear tick interrupt flag. */
CLR_INT( INT_FLAGS, INT_MASK );
vPortYieldFromTick();
vPortYieldFromTick();
asm volatile("reti");
}
#else
asm volatile ( "reti" );
}
#else /* if configUSE_PREEMPTION == 1 */
/*
* Tick ISR for the cooperative scheduler. All this does is increment the
* tick count. We don't need to switch context, this can only be done by
* manual calls to taskYIELD();
*/
ISR(TICK_INT_vect)
{
/* Clear tick interrupt flag. */
INT_FLAGS = INT_MASK;
xTaskIncrementTick();
}
#endif
ISR( TICK_INT_vect )
{
/* Clear tick interrupt flag. */
INT_FLAGS = INT_MASK;
xTaskIncrementTick();
}
#endif /* if configUSE_PREEMPTION == 1 */

134
portable/GCC/AVR_AVRDx/porthardware.h
View file

@ -5,98 +5,104 @@
/*-----------------------------------------------------------*/
#define CLR_INT(FLAG_REG, FLAG_MASK) \
asm volatile( \
"push r16\n\t" \
"ldi r16, %1\n\t" \
"sts %0, r16\n\t" \
"pop r16\n\t" \
: \
: "i"(_SFR_MEM_ADDR(FLAG_REG)),"i"((uint8_t)(FLAG_MASK)) \
#define CLR_INT( FLAG_REG, FLAG_MASK ) \
asm volatile ( \
"push r16\n\t" \
"ldi r16, %1\n\t" \
"sts %0, r16\n\t" \
"pop r16\n\t" \
: \
: "i" ( _SFR_MEM_ADDR( FLAG_REG ) ), "i" ( ( uint8_t ) ( FLAG_MASK ) ) \
);
#if ( configUSE_TIMER_INSTANCE == 0 )
#define TICK_INT_vect TCB0_INT_vect
#define INT_FLAGS TCB0_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_INT_vect TCB0_INT_vect
#define INT_FLAGS TCB0_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_init() { \
TCB0.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB0.INTCTRL = TCB_CAPT_bm; \
TCB0.CTRLA = TCB_ENABLE_bm; \
}
#define TICK_init() \
{ \
TCB0.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB0.INTCTRL = TCB_CAPT_bm; \
TCB0.CTRLA = TCB_ENABLE_bm; \
}
#elif ( configUSE_TIMER_INSTANCE == 1 )
#define TICK_INT_vect TCB1_INT_vect
#define INT_FLAGS TCB1_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_INT_vect TCB1_INT_vect
#define INT_FLAGS TCB1_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_init() \
{ \
TCB1.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB1.INTCTRL = TCB_CAPT_bm; \
TCB1.CTRLA = TCB_ENABLE_bm; \
}
#define TICK_init() { \
TCB1.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB1.INTCTRL = TCB_CAPT_bm; \
TCB1.CTRLA = TCB_ENABLE_bm; \
}
#elif ( configUSE_TIMER_INSTANCE == 2 )
#define TICK_INT_vect TCB2_INT_vect
#define INT_FLAGS TCB2_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_INT_vect TCB2_INT_vect
#define INT_FLAGS TCB2_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_init() \
{ \
TCB2.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB2.INTCTRL = TCB_CAPT_bm; \
TCB2.CTRLA = TCB_ENABLE_bm; \
}
#define TICK_init() { \
TCB2.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB2.INTCTRL = TCB_CAPT_bm; \
TCB2.CTRLA = TCB_ENABLE_bm; \
}
#elif ( configUSE_TIMER_INSTANCE == 3 )
#define TICK_INT_vect TCB3_INT_vect
#define INT_FLAGS TCB3_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_INT_vect TCB3_INT_vect
#define INT_FLAGS TCB3_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_init() \
{ \
TCB3.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB3.INTCTRL = TCB_CAPT_bm; \
TCB3.CTRLA = TCB_ENABLE_bm; \
}
#define TICK_init() { \
TCB3.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB3.INTCTRL = TCB_CAPT_bm; \
TCB3.CTRLA = TCB_ENABLE_bm; \
}
#elif ( configUSE_TIMER_INSTANCE == 4 )
#define TICK_INT_vect TCB4_INT_vect
#define INT_FLAGS TCB4_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_INT_vect TCB4_INT_vect
#define INT_FLAGS TCB4_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_init() { \
TCB4.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB4.INTCTRL = TCB_CAPT_bm; \
TCB4.CTRLA = TCB_ENABLE_bm; \
}
#define TICK_init() \
{ \
TCB4.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB4.INTCTRL = TCB_CAPT_bm; \
TCB4.CTRLA = TCB_ENABLE_bm; \
}
#elif ( configUSE_TIMER_INSTANCE == 5 )
#define TICK_INT_vect RTC_CNT_vect
#define INT_FLAGS RTC_INTFLAGS
#define INT_MASK RTC_OVF_bm
#define TICK_INT_vect RTC_CNT_vect
#define INT_FLAGS RTC_INTFLAGS
#define INT_MASK RTC_OVF_bm
/* Hertz to period for RTC setup */
#define RTC_PERIOD_HZ(x) ( 32768 * ( ( 1.0 / x ) ) )
#define TICK_init() { \
while (RTC.STATUS > 0); \
RTC.CTRLA = RTC_PRESCALER_DIV1_gc | 1 << RTC_RTCEN_bp; \
RTC.PER = RTC_PERIOD_HZ(configTICK_RATE_HZ); \
RTC.INTCTRL |= 1 << RTC_OVF_bp; \
}
/* Hertz to period for RTC setup */
#define RTC_PERIOD_HZ( x ) ( 32768 * ( ( 1.0 / x ) ) )
#define TICK_init() \
{ \
while( RTC.STATUS > 0 ) {; } \
RTC.CTRLA = RTC_PRESCALER_DIV1_gc | 1 << RTC_RTCEN_bp; \
RTC.PER = RTC_PERIOD_HZ( configTICK_RATE_HZ ); \
RTC.INTCTRL |= 1 << RTC_OVF_bp; \
}
#else
#else /* if ( configUSE_TIMER_INSTANCE == 0 ) */
#undef TICK_INT_vect
#undef INT_FLAGS
#undef INT_MASK
#undef TICK_init()
#error Invalid timer setting.
#endif
#endif /* if ( configUSE_TIMER_INSTANCE == 0 ) */
/*-----------------------------------------------------------*/

89
portable/GCC/AVR_AVRDx/portmacro.h
View file

@ -22,15 +22,16 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,64 +44,66 @@ extern "C" {
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT int
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT int
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
#define portPOINTER_SIZE_TYPE uint16_t
#define portPOINTER_SIZE_TYPE uint16_t
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
#if (configUSE_16_BIT_TICKS == 1)
typedef uint16_t TickType_t;
#define portMAX_DELAY (TickType_t)0xffff
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY (TickType_t)0xffffffffUL
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Critical section management. */
#define portENTER_CRITICAL() \
asm volatile("in __tmp_reg__, __SREG__"); \
asm volatile("cli"); \
asm volatile("push __tmp_reg__")
#define portENTER_CRITICAL() \
asm volatile ( "in __tmp_reg__, __SREG__" ); \
asm volatile ( "cli" ); \
asm volatile ( "push __tmp_reg__" )
#define portEXIT_CRITICAL() \
asm volatile("pop __tmp_reg__"); \
asm volatile("out __SREG__, __tmp_reg__")
#define portEXIT_CRITICAL() \
asm volatile ( "pop __tmp_reg__" ); \
asm volatile ( "out __SREG__, __tmp_reg__" )
#define portDISABLE_INTERRUPTS() asm volatile("cli" ::);
#define portENABLE_INTERRUPTS() asm volatile("sei" ::);
#define portDISABLE_INTERRUPTS() asm volatile ( "cli" ::);
#define portENABLE_INTERRUPTS() asm volatile ( "sei" ::);
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH (-1)
#define portTICK_PERIOD_MS ((TickType_t)1000 / configTICK_RATE_HZ)
#define portBYTE_ALIGNMENT 1
#define portNOP() asm volatile("nop");
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 1
#define portNOP() asm volatile ( "nop" );
/*-----------------------------------------------------------*/
/* Kernel utilities. */
extern void vPortYield(void) __attribute__((naked));
#define portYIELD() vPortYield()
extern void vPortYield( void ) __attribute__( ( naked ) );
#define portYIELD() vPortYield()
extern void vPortYieldFromISR(void) __attribute__((naked));
#define portYIELD_FROM_ISR() vPortYieldFromISR()
extern void vPortYieldFromISR( void ) __attribute__( ( naked ) );
#define portYIELD_FROM_ISR() vPortYieldFromISR()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO(vFunction, pvParameters) void vFunction(void *pvParameters)
#define portTASK_FUNCTION(vFunction, pvParameters) void vFunction(void *pvParameters)
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#ifdef __cplusplus
}
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* PORTMACRO_H */

287
portable/GCC/AVR_Mega0/port.c
View file

@ -23,7 +23,6 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#include <stdlib.h>
@ -34,18 +33,18 @@
#include "task.h"
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the AVR port.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the AVR port.
*----------------------------------------------------------*/
/* Start tasks with interrupts enables. */
#define portFLAGS_INT_ENABLED ((StackType_t) 0x80)
#define portFLAGS_INT_ENABLED ( ( StackType_t ) 0x80 )
/*-----------------------------------------------------------*/
/* We require the address of the pxCurrentTCB variable, but don't want to know
any details of its type. */
* any details of its type. */
typedef void RTOS_TCB_t;
extern volatile RTOS_TCB_t *volatile pxCurrentTCB;
extern volatile RTOS_TCB_t * volatile pxCurrentTCB;
/*-----------------------------------------------------------*/
@ -65,155 +64,157 @@ extern volatile RTOS_TCB_t *volatile pxCurrentTCB;
* so we need not worry about reading/writing to the stack pointer.
*/
#define portSAVE_CONTEXT() \
asm volatile("push r0 \n\t" \
"in r0, __SREG__ \n\t" \
"cli \n\t" \
"push r0 \n\t" \
"push r1 \n\t" \
"clr r1 \n\t" \
"push r2 \n\t" \
"push r3 \n\t" \
"push r4 \n\t" \
"push r5 \n\t" \
"push r6 \n\t" \
"push r7 \n\t" \
"push r8 \n\t" \
"push r9 \n\t" \
"push r10 \n\t" \
"push r11 \n\t" \
"push r12 \n\t" \
"push r13 \n\t" \
"push r14 \n\t" \
"push r15 \n\t" \
"push r16 \n\t" \
"push r17 \n\t" \
"push r18 \n\t" \
"push r19 \n\t" \
"push r20 \n\t" \
"push r21 \n\t" \
"push r22 \n\t" \
"push r23 \n\t" \
"push r24 \n\t" \
"push r25 \n\t" \
"push r26 \n\t" \
"push r27 \n\t" \
"push r28 \n\t" \
"push r29 \n\t" \
"push r30 \n\t" \
"push r31 \n\t" \
"lds r26, pxCurrentTCB \n\t" \
"lds r27, pxCurrentTCB + 1 \n\t" \
"in r0, __SP_L__ \n\t" \
"st x+, r0 \n\t" \
"in r0, __SP_H__ \n\t" \
"st x+, r0 \n\t");
#define portSAVE_CONTEXT() \
asm volatile ( "push r0 \n\t" \
"in r0, __SREG__ \n\t" \
"cli \n\t" \
"push r0 \n\t" \
"push r1 \n\t" \
"clr r1 \n\t" \
"push r2 \n\t" \
"push r3 \n\t" \
"push r4 \n\t" \
"push r5 \n\t" \
"push r6 \n\t" \
"push r7 \n\t" \
"push r8 \n\t" \
"push r9 \n\t" \
"push r10 \n\t" \
"push r11 \n\t" \
"push r12 \n\t" \
"push r13 \n\t" \
"push r14 \n\t" \
"push r15 \n\t" \
"push r16 \n\t" \
"push r17 \n\t" \
"push r18 \n\t" \
"push r19 \n\t" \
"push r20 \n\t" \
"push r21 \n\t" \
"push r22 \n\t" \
"push r23 \n\t" \
"push r24 \n\t" \
"push r25 \n\t" \
"push r26 \n\t" \
"push r27 \n\t" \
"push r28 \n\t" \
"push r29 \n\t" \
"push r30 \n\t" \
"push r31 \n\t" \
"lds r26, pxCurrentTCB \n\t" \
"lds r27, pxCurrentTCB + 1 \n\t" \
"in r0, __SP_L__ \n\t" \
"st x+, r0 \n\t" \
"in r0, __SP_H__ \n\t" \
"st x+, r0 \n\t" );
/*
* Opposite to portSAVE_CONTEXT(). Interrupts will have been disabled during
* the context save so we can write to the stack pointer.
*/
#define portRESTORE_CONTEXT() \
asm volatile("lds r26, pxCurrentTCB \n\t" \
"lds r27, pxCurrentTCB + 1 \n\t" \
"ld r28, x+ \n\t" \
"out __SP_L__, r28 \n\t" \
"ld r29, x+ \n\t" \
"out __SP_H__, r29 \n\t" \
"pop r31 \n\t" \
"pop r30 \n\t" \
"pop r29 \n\t" \
"pop r28 \n\t" \
"pop r27 \n\t" \
"pop r26 \n\t" \
"pop r25 \n\t" \
"pop r24 \n\t" \
"pop r23 \n\t" \
"pop r22 \n\t" \
"pop r21 \n\t" \
"pop r20 \n\t" \
"pop r19 \n\t" \
"pop r18 \n\t" \
"pop r17 \n\t" \
"pop r16 \n\t" \
"pop r15 \n\t" \
"pop r14 \n\t" \
"pop r13 \n\t" \
"pop r12 \n\t" \
"pop r11 \n\t" \
"pop r10 \n\t" \
"pop r9 \n\t" \
"pop r8 \n\t" \
"pop r7 \n\t" \
"pop r6 \n\t" \
"pop r5 \n\t" \
"pop r4 \n\t" \
"pop r3 \n\t" \
"pop r2 \n\t" \
"pop r1 \n\t" \
"pop r0 \n\t" \
"out __SREG__, r0 \n\t" \
"pop r0 \n\t");
#define portRESTORE_CONTEXT() \
asm volatile ( "lds r26, pxCurrentTCB \n\t" \
"lds r27, pxCurrentTCB + 1 \n\t" \
"ld r28, x+ \n\t" \
"out __SP_L__, r28 \n\t" \
"ld r29, x+ \n\t" \
"out __SP_H__, r29 \n\t" \
"pop r31 \n\t" \
"pop r30 \n\t" \
"pop r29 \n\t" \
"pop r28 \n\t" \
"pop r27 \n\t" \
"pop r26 \n\t" \
"pop r25 \n\t" \
"pop r24 \n\t" \
"pop r23 \n\t" \
"pop r22 \n\t" \
"pop r21 \n\t" \
"pop r20 \n\t" \
"pop r19 \n\t" \
"pop r18 \n\t" \
"pop r17 \n\t" \
"pop r16 \n\t" \
"pop r15 \n\t" \
"pop r14 \n\t" \
"pop r13 \n\t" \
"pop r12 \n\t" \
"pop r11 \n\t" \
"pop r10 \n\t" \
"pop r9 \n\t" \
"pop r8 \n\t" \
"pop r7 \n\t" \
"pop r6 \n\t" \
"pop r5 \n\t" \
"pop r4 \n\t" \
"pop r3 \n\t" \
"pop r2 \n\t" \
"pop r1 \n\t" \
"pop r0 \n\t" \
"out __SREG__, r0 \n\t" \
"pop r0 \n\t" );
/*-----------------------------------------------------------*/
/*
* Perform hardware setup to enable ticks from timer.
*/
static void prvSetupTimerInterrupt(void);
static void prvSetupTimerInterrupt( void );
/*-----------------------------------------------------------*/
/*
* See header file for description.
*/
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters)
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
{
uint16_t usAddress;
/*lint -e950 -e611 -e923 Lint doesn't like this much - but nothing I can do about it. */
/* Place a few bytes of known values on the bottom of the stack.
This is just useful for debugging. Uncomment if needed. */
// *pxTopOfStack = 0x11;
// pxTopOfStack--;
// *pxTopOfStack = 0x22;
// pxTopOfStack--;
// *pxTopOfStack = 0x33;
// pxTopOfStack--;
* This is just useful for debugging. Uncomment if needed. */
/* *pxTopOfStack = 0x11; */
/* pxTopOfStack--; */
/* *pxTopOfStack = 0x22; */
/* pxTopOfStack--; */
/* *pxTopOfStack = 0x33; */
/* pxTopOfStack--; */
/* The start of the task code will be popped off the stack last, so place
it on first. */
usAddress = (uint16_t)pxCode;
*pxTopOfStack = (StackType_t)(usAddress & (uint16_t)0x00ff);
* it on first. */
usAddress = ( uint16_t ) pxCode;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
usAddress >>= 8;
*pxTopOfStack = (StackType_t)(usAddress & (uint16_t)0x00ff);
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
/* Next simulate the stack as if after a call to portSAVE_CONTEXT().
portSAVE_CONTEXT places the flags on the stack immediately after r0
to ensure the interrupts get disabled as soon as possible, and so ensuring
the stack use is minimal should a context switch interrupt occur. */
*pxTopOfStack = (StackType_t)0x00; /* R0 */
* portSAVE_CONTEXT places the flags on the stack immediately after r0
* to ensure the interrupts get disabled as soon as possible, and so ensuring
* the stack use is minimal should a context switch interrupt occur. */
*pxTopOfStack = ( StackType_t ) 0x00; /* R0 */
pxTopOfStack--;
*pxTopOfStack = portFLAGS_INT_ENABLED;
pxTopOfStack--;
/* Now the remaining registers. The compiler expects R1 to be 0. */
*pxTopOfStack = (StackType_t)0x00; /* R1 */
*pxTopOfStack = ( StackType_t ) 0x00; /* R1 */
/* Leave R2 - R23 untouched */
pxTopOfStack -= 23;
/* Place the parameter on the stack in the expected location. */
usAddress = (uint16_t)pvParameters;
*pxTopOfStack = (StackType_t)(usAddress & (uint16_t)0x00ff);
usAddress = ( uint16_t ) pvParameters;
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
pxTopOfStack--;
usAddress >>= 8;
*pxTopOfStack = (StackType_t)(usAddress & (uint16_t)0x00ff);
*pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
/* Leave register R26 - R31 untouched */
pxTopOfStack -= 7;
@ -224,7 +225,7 @@ StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxC
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler(void)
BaseType_t xPortStartScheduler( void )
{
/* Setup the hardware to generate the tick. */
prvSetupTimerInterrupt();
@ -233,15 +234,15 @@ BaseType_t xPortStartScheduler(void)
portRESTORE_CONTEXT();
/* Simulate a function call end as generated by the compiler. We will now
jump to the start of the task the context of which we have just restored. */
asm volatile("ret");
* jump to the start of the task the context of which we have just restored. */
asm volatile ( "ret" );
/* Should not get here. */
return pdTRUE;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler(void)
void vPortEndScheduler( void )
{
/* vPortEndScheduler is not implemented in this port. */
}
@ -251,13 +252,13 @@ void vPortEndScheduler(void)
* Manual context switch. The first thing we do is save the registers so we
* can use a naked attribute.
*/
void vPortYield(void) __attribute__((naked));
void vPortYield(void)
void vPortYield( void ) __attribute__( ( naked ) );
void vPortYield( void )
{
portSAVE_CONTEXT();
vTaskSwitchContext();
portRESTORE_CONTEXT();
asm volatile("ret");
asm volatile ( "ret" );
}
/*-----------------------------------------------------------*/
@ -265,13 +266,13 @@ void vPortYield(void)
* Manual context switch callable from ISRs. The first thing
* we do is save the registers so we can use a naked attribute.
*/
void vPortYieldFromISR(void) __attribute__((naked));
void vPortYieldFromISR(void)
void vPortYieldFromISR( void ) __attribute__( ( naked ) );
void vPortYieldFromISR( void )
{
portSAVE_CONTEXT();
vTaskSwitchContext();
portRESTORE_CONTEXT();
asm volatile("reti");
asm volatile ( "reti" );
}
/*-----------------------------------------------------------*/
@ -281,24 +282,26 @@ void vPortYieldFromISR(void)
* difference from vPortYield() is the tick count is incremented as the
* call comes from the tick ISR.
*/
void vPortYieldFromTick(void) __attribute__((naked));
void vPortYieldFromTick(void)
void vPortYieldFromTick( void ) __attribute__( ( naked ) );
void vPortYieldFromTick( void )
{
portSAVE_CONTEXT();
if (xTaskIncrementTick() != pdFALSE) {
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
portRESTORE_CONTEXT();
asm volatile("reti");
asm volatile ( "reti" );
}
/*-----------------------------------------------------------*/
/*
* Setup timer to generate a tick interrupt.
*/
static void prvSetupTimerInterrupt(void)
static void prvSetupTimerInterrupt( void )
{
TICK_init();
}
@ -311,26 +314,26 @@ static void prvSetupTimerInterrupt(void)
* the context is saved at the start of vPortYieldFromTick(). The tick
* count is incremented after the context is saved.
*/
ISR(TICK_INT_vect, ISR_NAKED)
{
/* Clear tick interrupt flag. */
CLR_INT(INT_FLAGS, INT_MASK);
ISR( TICK_INT_vect, ISR_NAKED )
{
/* Clear tick interrupt flag. */
CLR_INT( INT_FLAGS, INT_MASK );
vPortYieldFromTick();
vPortYieldFromTick();
asm volatile("reti");
}
#else
asm volatile ( "reti" );
}
#else /* if configUSE_PREEMPTION == 1 */
/*
* Tick ISR for the cooperative scheduler. All this does is increment the
* tick count. We don't need to switch context, this can only be done by
* manual calls to taskYIELD();
*/
ISR(TICK_INT_vect)
{
/* Clear tick interrupt flag. */
INT_FLAGS = INT_MASK;
xTaskIncrementTick();
}
#endif
ISR( TICK_INT_vect )
{
/* Clear tick interrupt flag. */
INT_FLAGS = INT_MASK;
xTaskIncrementTick();
}
#endif /* if configUSE_PREEMPTION == 1 */

111
portable/GCC/AVR_Mega0/porthardware.h
View file

@ -5,86 +5,91 @@
/*-----------------------------------------------------------*/
#define CLR_INT(FLAG_REG, FLAG_MASK) \
asm volatile( \
"push r16\n\t" \
"ldi r16, %1\n\t" \
"sts %0, r16\n\t" \
"pop r16\n\t" \
: \
: "i"(_SFR_MEM_ADDR(FLAG_REG)),"i"((uint8_t)(FLAG_MASK)) \
#define CLR_INT( FLAG_REG, FLAG_MASK ) \
asm volatile ( \
"push r16\n\t" \
"ldi r16, %1\n\t" \
"sts %0, r16\n\t" \
"pop r16\n\t" \
: \
: "i" ( _SFR_MEM_ADDR( FLAG_REG ) ), "i" ( ( uint8_t ) ( FLAG_MASK ) ) \
);
#if ( configUSE_TIMER_INSTANCE == 0 )
#define TICK_INT_vect TCB0_INT_vect
#define INT_FLAGS TCB0_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_INT_vect TCB0_INT_vect
#define INT_FLAGS TCB0_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_init() { \
TCB0.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB0.INTCTRL = TCB_CAPT_bm; \
TCB0.CTRLA = TCB_ENABLE_bm; \
}
#define TICK_init() \
{ \
TCB0.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB0.INTCTRL = TCB_CAPT_bm; \
TCB0.CTRLA = TCB_ENABLE_bm; \
}
#elif ( configUSE_TIMER_INSTANCE == 1 )
#define TICK_INT_vect TCB1_INT_vect
#define INT_FLAGS TCB1_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_INT_vect TCB1_INT_vect
#define INT_FLAGS TCB1_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_init() { \
TCB1.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB1.INTCTRL = TCB_CAPT_bm; \
TCB1.CTRLA = TCB_ENABLE_bm; \
}
#define TICK_init() \
{ \
TCB1.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB1.INTCTRL = TCB_CAPT_bm; \
TCB1.CTRLA = TCB_ENABLE_bm; \
}
#elif ( configUSE_TIMER_INSTANCE == 2 )
#define TICK_INT_vect TCB2_INT_vect
#define INT_FLAGS TCB2_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_INT_vect TCB2_INT_vect
#define INT_FLAGS TCB2_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_init() { \
TCB2.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB2.INTCTRL = TCB_CAPT_bm; \
TCB2.CTRLA = TCB_ENABLE_bm; \
}
#define TICK_init() \
{ \
TCB2.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB2.INTCTRL = TCB_CAPT_bm; \
TCB2.CTRLA = TCB_ENABLE_bm; \
}
#elif ( configUSE_TIMER_INSTANCE == 3 )
#define TICK_INT_vect TCB3_INT_vect
#define INT_FLAGS TCB3_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_INT_vect TCB3_INT_vect
#define INT_FLAGS TCB3_INTFLAGS
#define INT_MASK TCB_CAPT_bm
#define TICK_init() { \
TCB3.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB3.INTCTRL = TCB_CAPT_bm; \
TCB3.CTRLA = TCB_ENABLE_bm; \
}
#define TICK_init() \
{ \
TCB3.CCMP = configCPU_CLOCK_HZ / configTICK_RATE_HZ; \
TCB3.INTCTRL = TCB_CAPT_bm; \
TCB3.CTRLA = TCB_ENABLE_bm; \
}
#elif ( configUSE_TIMER_INSTANCE == 4 )
#define TICK_INT_vect RTC_CNT_vect
#define INT_FLAGS RTC_INTFLAGS
#define INT_MASK RTC_OVF_bm
#define TICK_INT_vect RTC_CNT_vect
#define INT_FLAGS RTC_INTFLAGS
#define INT_MASK RTC_OVF_bm
/* Hertz to period for RTC setup */
#define RTC_PERIOD_HZ(x) ( 32768 * ( ( 1.0 / x ) ) )
#define TICK_init() { \
while (RTC.STATUS > 0); \
RTC.CTRLA = RTC_PRESCALER_DIV1_gc | 1 << RTC_RTCEN_bp; \
RTC.PER = RTC_PERIOD_HZ(configTICK_RATE_HZ); \
RTC.INTCTRL |= 1 << RTC_OVF_bp; \
}
/* Hertz to period for RTC setup */
#define RTC_PERIOD_HZ( x ) ( 32768 * ( ( 1.0 / x ) ) )
#define TICK_init() \
{ \
while( RTC.STATUS > 0 ) {; } \
RTC.CTRLA = RTC_PRESCALER_DIV1_gc | 1 << RTC_RTCEN_bp; \
RTC.PER = RTC_PERIOD_HZ( configTICK_RATE_HZ ); \
RTC.INTCTRL |= 1 << RTC_OVF_bp; \
}
#else
#else /* if ( configUSE_TIMER_INSTANCE == 0 ) */
#undef TICK_INT_vect
#undef INT_FLAGS
#undef INT_MASK
#undef TICK_init()
#error Invalid timer setting.
#endif
#endif /* if ( configUSE_TIMER_INSTANCE == 0 ) */
/*-----------------------------------------------------------*/

81
portable/GCC/AVR_Mega0/portmacro.h
View file

@ -22,15 +22,16 @@
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
extern "C" {
#endif
/* *INDENT-ON* */
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,64 +44,66 @@ extern "C" {
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT int
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT int
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
#define portPOINTER_SIZE_TYPE uint16_t
#define portPOINTER_SIZE_TYPE uint16_t
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
#if (configUSE_16_BIT_TICKS == 1)
typedef uint16_t TickType_t;
#define portMAX_DELAY (TickType_t)0xffff
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY (TickType_t)0xffffffffUL
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Critical section management. */
#define portENTER_CRITICAL() \
asm volatile("in __tmp_reg__, __SREG__"); \
asm volatile("cli"); \
asm volatile("push __tmp_reg__")
#define portENTER_CRITICAL() \
asm volatile ( "in __tmp_reg__, __SREG__" ); \
asm volatile ( "cli" ); \
asm volatile ( "push __tmp_reg__" )
#define portEXIT_CRITICAL() \
asm volatile("pop __tmp_reg__"); \
asm volatile("out __SREG__, __tmp_reg__")
#define portEXIT_CRITICAL() \
asm volatile ( "pop __tmp_reg__" ); \
asm volatile ( "out __SREG__, __tmp_reg__" )
#define portDISABLE_INTERRUPTS() asm volatile("cli" ::);
#define portENABLE_INTERRUPTS() asm volatile("sei" ::);
#define portDISABLE_INTERRUPTS() asm volatile ( "cli" ::);
#define portENABLE_INTERRUPTS() asm volatile ( "sei" ::);
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH (-1)
#define portTICK_PERIOD_MS ((TickType_t)1000 / configTICK_RATE_HZ)
#define portBYTE_ALIGNMENT 1
#define portNOP() asm volatile("nop");
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 1
#define portNOP() asm volatile ( "nop" );
/*-----------------------------------------------------------*/
/* Kernel utilities. */
extern void vPortYield(void) __attribute__((naked));
#define portYIELD() vPortYield()
extern void vPortYield( void ) __attribute__( ( naked ) );
#define portYIELD() vPortYield()
extern void vPortYieldFromISR(void) __attribute__((naked));
#define portYIELD_FROM_ISR() vPortYieldFromISR()
extern void vPortYieldFromISR( void ) __attribute__( ( naked ) );
#define portYIELD_FROM_ISR() vPortYieldFromISR()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO(vFunction, pvParameters) void vFunction(void *pvParameters)
#define portTASK_FUNCTION(vFunction, pvParameters) void vFunction(void *pvParameters)
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
/* *INDENT-OFF* */
#ifdef __cplusplus
}
}
#endif
/* *INDENT-ON* */
#endif /* PORTMACRO_H */

112
portable/GCC/CORTUS_APS3/port.c
View file

@ -38,7 +38,7 @@
/*-----------------------------------------------------------*/
/* The initial PSR has the Previous Interrupt Enabled (PIEN) flag set. */
#define portINITIAL_PSR ( 0x00020000 )
#define portINITIAL_PSR ( 0x00020000 )
/*-----------------------------------------------------------*/
@ -48,100 +48,98 @@
static void prvSetupTimerInterrupt( void );
/*-----------------------------------------------------------*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t * pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
/* Make space on the stack for the context - this leaves a couple of spaces
* empty. */
pxTopOfStack -= 20;
/* Make space on the stack for the context - this leaves a couple of spaces
empty. */
pxTopOfStack -= 20;
/* Fill the registers with known values to assist debugging. */
pxTopOfStack[ 16 ] = 0;
pxTopOfStack[ 15 ] = portINITIAL_PSR;
pxTopOfStack[ 14 ] = ( uint32_t ) pxCode;
pxTopOfStack[ 13 ] = 0x00000000UL; /* R15. */
pxTopOfStack[ 12 ] = 0x00000000UL; /* R14. */
pxTopOfStack[ 11 ] = 0x0d0d0d0dUL;
pxTopOfStack[ 10 ] = 0x0c0c0c0cUL;
pxTopOfStack[ 9 ] = 0x0b0b0b0bUL;
pxTopOfStack[ 8 ] = 0x0a0a0a0aUL;
pxTopOfStack[ 7 ] = 0x09090909UL;
pxTopOfStack[ 6 ] = 0x08080808UL;
pxTopOfStack[ 5 ] = 0x07070707UL;
pxTopOfStack[ 4 ] = 0x06060606UL;
pxTopOfStack[ 3 ] = 0x05050505UL;
pxTopOfStack[ 2 ] = 0x04040404UL;
pxTopOfStack[ 1 ] = 0x03030303UL;
pxTopOfStack[ 0 ] = ( uint32_t ) pvParameters;
/* Fill the registers with known values to assist debugging. */
pxTopOfStack[ 16 ] = 0;
pxTopOfStack[ 15 ] = portINITIAL_PSR;
pxTopOfStack[ 14 ] = ( uint32_t ) pxCode;
pxTopOfStack[ 13 ] = 0x00000000UL; /* R15. */
pxTopOfStack[ 12 ] = 0x00000000UL; /* R14. */
pxTopOfStack[ 11 ] = 0x0d0d0d0dUL;
pxTopOfStack[ 10 ] = 0x0c0c0c0cUL;
pxTopOfStack[ 9 ] = 0x0b0b0b0bUL;
pxTopOfStack[ 8 ] = 0x0a0a0a0aUL;
pxTopOfStack[ 7 ] = 0x09090909UL;
pxTopOfStack[ 6 ] = 0x08080808UL;
pxTopOfStack[ 5 ] = 0x07070707UL;
pxTopOfStack[ 4 ] = 0x06060606UL;
pxTopOfStack[ 3 ] = 0x05050505UL;
pxTopOfStack[ 2 ] = 0x04040404UL;
pxTopOfStack[ 1 ] = 0x03030303UL;
pxTopOfStack[ 0 ] = ( uint32_t ) pvParameters;
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* Set-up the timer interrupt. */
prvSetupTimerInterrupt();
/* Set-up the timer interrupt. */
prvSetupTimerInterrupt();
/* Integrated Interrupt Controller: Enable all interrupts. */
ic->ien = 1;
/* Integrated Interrupt Controller: Enable all interrupts. */
ic->ien = 1;
/* Restore callee saved registers. */
portRESTORE_CONTEXT();
/* Restore callee saved registers. */
portRESTORE_CONTEXT();
/* Should not get here. */
return 0;
/* Should not get here. */
return 0;
}
/*-----------------------------------------------------------*/
static void prvSetupTimerInterrupt( void )
{
/* Enable timer interrupts */
counter1->reload = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1;
counter1->value = counter1->reload;
counter1->mask = 1;
/* Enable timer interrupts */
counter1->reload = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1;
counter1->value = counter1->reload;
counter1->mask = 1;
/* Set the IRQ Handler priority and enable it. */
irq[ IRQ_COUNTER1 ].ien = 1;
/* Set the IRQ Handler priority and enable it. */
irq[ IRQ_COUNTER1 ].ien = 1;
}
/*-----------------------------------------------------------*/
/* Trap 31 handler. */
void interrupt31_handler( void ) __attribute__( ( naked ) );
void interrupt31_handler( void ) __attribute__((naked));
void interrupt31_handler( void )
{
portSAVE_CONTEXT();
__asm volatile ( "call vTaskSwitchContext" );
portRESTORE_CONTEXT();
portSAVE_CONTEXT();
__asm volatile ( "call vTaskSwitchContext" );
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
static void prvProcessTick( void ) __attribute__( ( noinline ) );
static void prvProcessTick( void ) __attribute__((noinline));
static void prvProcessTick( void )
{
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
/* Clear the Tick Interrupt. */
counter1->expired = 0;
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
/* Clear the Tick Interrupt. */
counter1->expired = 0;
}
/*-----------------------------------------------------------*/
/* Timer 1 interrupt handler, used for tick interrupt. */
void interrupt7_handler( void ) __attribute__( ( naked ) );
void interrupt7_handler( void ) __attribute__((naked));
void interrupt7_handler( void )
{
portSAVE_CONTEXT();
prvProcessTick();
portRESTORE_CONTEXT();
portSAVE_CONTEXT();
prvProcessTick();
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* Nothing to do. Unlikely to want to end. */
/* Nothing to do. Unlikely to want to end. */
}
/*-----------------------------------------------------------*/

154
portable/GCC/CORTUS_APS3/portmacro.h
View file

@ -26,13 +26,13 @@
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
#include <machine/cpu.h>
#include <machine/cpu.h>
/*-----------------------------------------------------------
* Port specific definitions.
@ -45,108 +45,108 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 4
#define portNOP() __asm__ volatile ( "mov r0, r0" )
#define portCRITICAL_NESTING_IN_TCB 1
#define portIRQ_TRAP_YIELD 31
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 4
#define portNOP() __asm__ volatile ( "mov r0, r0" )
#define portCRITICAL_NESTING_IN_TCB 1
#define portIRQ_TRAP_YIELD 31
/*-----------------------------------------------------------*/
/* Task utilities. */
extern void vPortYield( void );
extern void vPortYield( void );
/*---------------------------------------------------------------------------*/
#define portYIELD() asm __volatile__ ( " trap #%0 " : : "i" ( portIRQ_TRAP_YIELD ) : "memory" )
#define portYIELD() asm __volatile__( " trap #%0 "::"i"(portIRQ_TRAP_YIELD):"memory")
/*---------------------------------------------------------------------------*/
extern void vTaskEnterCritical( void );
extern void vTaskExitCritical( void );
#define portENTER_CRITICAL() vTaskEnterCritical()
#define portEXIT_CRITICAL() vTaskExitCritical()
extern void vTaskEnterCritical( void );
extern void vTaskExitCritical( void );
#define portENTER_CRITICAL() vTaskEnterCritical()
#define portEXIT_CRITICAL() vTaskExitCritical()
/*---------------------------------------------------------------------------*/
/* Critical section management. */
#define portDISABLE_INTERRUPTS() cpu_int_disable()
#define portENABLE_INTERRUPTS() cpu_int_enable()
#define portDISABLE_INTERRUPTS() cpu_int_disable()
#define portENABLE_INTERRUPTS() cpu_int_enable()
/*---------------------------------------------------------------------------*/
#define portYIELD_FROM_ISR( xHigherPriorityTaskWoken ) if( xHigherPriorityTaskWoken != pdFALSE ) vTaskSwitchContext()
#define portYIELD_FROM_ISR( xHigherPriorityTaskWoken ) if( xHigherPriorityTaskWoken != pdFALSE ) vTaskSwitchContext()
/*---------------------------------------------------------------------------*/
#define portSAVE_CONTEXT() \
asm __volatile__ \
( \
"sub r1, #68 \n"/* Make space on the stack for the context. */ \
"std r2, [r1] + 0 \n" \
"stq r4, [r1] + 8 \n" \
"stq r8, [r1] + 24 \n" \
"stq r12, [r1] + 40 \n" \
"mov r6, rtt \n" \
"mov r7, psr \n" \
"std r6, [r1] + 56 \n" \
"movhi r2, #16384 \n" /* Set the pointer to the IC. */ \
"ldub r3, [r2] + 2 \n" /* Load the current interrupt mask. */ \
"st r3, [r1]+ 64 \n" /* Store the interrupt mask on the stack. */ \
"ld r2, [r0]+short(pxCurrentTCB) \n"/* Load the pointer to the TCB. */ \
"st r1, [r2] \n" /* Save the stack pointer into the TCB. */ \
"mov r14, r1 \n" /* Compiler expects r14 to be set to the function stack. */ \
);
#define portSAVE_CONTEXT() \
asm __volatile__ \
( \
"sub r1, #68 \n" /* Make space on the stack for the context. */ \
"std r2, [r1] + 0 \n" \
"stq r4, [r1] + 8 \n" \
"stq r8, [r1] + 24 \n" \
"stq r12, [r1] + 40 \n" \
"mov r6, rtt \n" \
"mov r7, psr \n" \
"std r6, [r1] + 56 \n" \
"movhi r2, #16384 \n" /* Set the pointer to the IC. */ \
"ldub r3, [r2] + 2 \n" /* Load the current interrupt mask. */ \
"st r3, [r1]+ 64 \n" /* Store the interrupt mask on the stack. */ \
"ld r2, [r0]+short(pxCurrentTCB) \n" /* Load the pointer to the TCB. */ \
"st r1, [r2] \n" /* Save the stack pointer into the TCB. */ \
"mov r14, r1 \n" /* Compiler expects r14 to be set to the function stack. */ \
);
/*---------------------------------------------------------------------------*/
#define portRESTORE_CONTEXT() \
asm __volatile__ ( \
"ld r2, [r0]+short(pxCurrentTCB) \n"/* Load the TCB to find the stack pointer and context. */\
"ld r1, [r2] \n" \
"movhi r2, #16384 \n" /* Set the pointer to the IC. */ \
"ld r3, [r1] + 64 \n" /* Load the previous interrupt mask. */ \
"stb r3, [r2] + 2 \n" /* Set the current interrupt mask to be the previous. */ \
"ldd r6, [r1] + 56 \n" /* Restore context. */ \
"mov rtt, r6 \n" \
"mov psr, r7 \n" \
"ldd r2, [r1] + 0 \n" \
"ldq r4, [r1] + 8 \n" \
"ldq r8, [r1] + 24 \n" \
"ldq r12, [r1] + 40 \n" \
"add r1, #68 \n" \
"rti \n" \
);
#define portRESTORE_CONTEXT() \
asm __volatile__( \
"ld r2, [r0]+short(pxCurrentTCB) \n" /* Load the TCB to find the stack pointer and context. */ \
"ld r1, [r2] \n" \
"movhi r2, #16384 \n" /* Set the pointer to the IC. */ \
"ld r3, [r1] + 64 \n" /* Load the previous interrupt mask. */ \
"stb r3, [r2] + 2 \n" /* Set the current interrupt mask to be the previous. */ \
"ldd r6, [r1] + 56 \n" /* Restore context. */ \
"mov rtt, r6 \n" \
"mov psr, r7 \n" \
"ldd r2, [r1] + 0 \n" \
"ldq r4, [r1] + 8 \n" \
"ldq r8, [r1] + 24 \n" \
"ldq r12, [r1] + 40 \n" \
"add r1, #68 \n" \
"rti \n" \
);
/*---------------------------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
/*---------------------------------------------------------------------------*/
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

108
portable/GCC/ColdFire_V2/port.c
View file

@ -29,36 +29,34 @@
#include "FreeRTOS.h"
#include "task.h"
#define portINITIAL_FORMAT_VECTOR ( ( StackType_t ) 0x4000 )
#define portINITIAL_FORMAT_VECTOR ( ( StackType_t ) 0x4000 )
/* Supervisor mode set. */
#define portINITIAL_STATUS_REGISTER ( ( StackType_t ) 0x2000 )
#define portINITIAL_STATUS_REGISTER ( ( StackType_t ) 0x2000)
/* Used to keep track of the number of nested calls to taskENTER_CRITICAL(). This
* will be set to 0 prior to the first task being started. */
will be set to 0 prior to the first task being started. */
static uint32_t ulCriticalNesting = 0x9999UL;
/*-----------------------------------------------------------*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t * pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
*pxTopOfStack = ( StackType_t ) pvParameters;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xDEADBEEF;
pxTopOfStack--;
*pxTopOfStack = (StackType_t) 0xDEADBEEF;
pxTopOfStack--;
/* Exception stack frame starts with the return address. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
/* Exception stack frame starts with the return address. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
*pxTopOfStack = ( portINITIAL_FORMAT_VECTOR << 16UL ) | ( portINITIAL_STATUS_REGISTER );
pxTopOfStack--;
*pxTopOfStack = ( portINITIAL_FORMAT_VECTOR << 16UL ) | ( portINITIAL_STATUS_REGISTER );
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x0; /*FP*/
pxTopOfStack -= 14; /* A5 to D0. */
*pxTopOfStack = ( StackType_t ) 0x0; /*FP*/
pxTopOfStack -= 14; /* A5 to D0. */
return pxTopOfStack;
}
@ -66,67 +64,71 @@ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
BaseType_t xPortStartScheduler( void )
{
extern void vPortStartFirstTask( void );
extern void vPortStartFirstTask( void );
ulCriticalNesting = 0UL;
ulCriticalNesting = 0UL;
/* Configure the interrupts used by this port. */
vApplicationSetupInterrupts();
/* Configure the interrupts used by this port. */
vApplicationSetupInterrupts();
/* Start the first task executing. */
vPortStartFirstTask();
/* Start the first task executing. */
vPortStartFirstTask();
return pdFALSE;
return pdFALSE;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* Not implemented as there is nothing to return to. */
/* Not implemented as there is nothing to return to. */
}
/*-----------------------------------------------------------*/
void vPortEnterCritical( void )
{
if( ulCriticalNesting == 0UL )
{
/* Guard against context switches being pended simultaneously with a
* critical section being entered. */
do
{
portDISABLE_INTERRUPTS();
if( ulCriticalNesting == 0UL )
{
/* Guard against context switches being pended simultaneously with a
critical section being entered. */
do
{
portDISABLE_INTERRUPTS();
if( MCF_INTC0_INTFRCL == 0UL )
{
break;
}
if( MCF_INTC0_INTFRCL == 0UL )
{
break;
}
portENABLE_INTERRUPTS();
portENABLE_INTERRUPTS();
} while( 1 );
}
ulCriticalNesting++;
} while( 1 );
}
ulCriticalNesting++;
}
/*-----------------------------------------------------------*/
void vPortExitCritical( void )
{
ulCriticalNesting--;
if( ulCriticalNesting == 0 )
{
portENABLE_INTERRUPTS();
}
ulCriticalNesting--;
if( ulCriticalNesting == 0 )
{
portENABLE_INTERRUPTS();
}
}
/*-----------------------------------------------------------*/
void vPortYieldHandler( void )
{
uint32_t ulSavedInterruptMask;
uint32_t ulSavedInterruptMask;
ulSavedInterruptMask = portSET_INTERRUPT_MASK_FROM_ISR();
/* Note this will clear all forced interrupts - this is done for speed. */
MCF_INTC0_INTFRCL = 0;
vTaskSwitchContext();
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulSavedInterruptMask );
ulSavedInterruptMask = portSET_INTERRUPT_MASK_FROM_ISR();
/* Note this will clear all forced interrupts - this is done for speed. */
MCF_INTC0_INTFRCL = 0;
vTaskSwitchContext();
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulSavedInterruptMask );
}

94
portable/GCC/ColdFire_V2/portmacro.h
View file

@ -26,11 +26,11 @@
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,72 +43,72 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portBYTE_ALIGNMENT 4
#define portSTACK_GROWTH -1
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 4
#define portSTACK_GROWTH -1
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
/*-----------------------------------------------------------*/
uint32_t ulPortSetIPL( uint32_t );
#define portDISABLE_INTERRUPTS() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portENABLE_INTERRUPTS() ulPortSetIPL( 0 )
uint32_t ulPortSetIPL( uint32_t );
#define portDISABLE_INTERRUPTS() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portENABLE_INTERRUPTS() ulPortSetIPL( 0 )
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
extern UBaseType_t uxPortSetInterruptMaskFromISR( void );
extern void vPortClearInterruptMaskFromISR( UBaseType_t );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusRegister ) ulPortSetIPL( uxSavedStatusRegister )
extern UBaseType_t uxPortSetInterruptMaskFromISR( void );
extern void vPortClearInterruptMaskFromISR( UBaseType_t );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetIPL( configMAX_SYSCALL_INTERRUPT_PRIORITY )
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusRegister ) ulPortSetIPL( uxSavedStatusRegister )
/*-----------------------------------------------------------*/
/* Task utilities. */
#define portNOP() asm volatile ( "nop" )
#define portNOP() asm volatile ( "nop" )
/* Note this will overwrite all other bits in the force register, it is done this way for speed. */
#define portYIELD() MCF_INTC0_INTFRCL = ( 1UL << configYIELD_INTERRUPT_VECTOR ); portNOP(); portNOP()
#define portYIELD() MCF_INTC0_INTFRCL = ( 1UL << configYIELD_INTERRUPT_VECTOR ); portNOP(); portNOP()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters ) __attribute__( ( noreturn ) )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) __attribute__((noreturn))
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
/*-----------------------------------------------------------*/
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
if( xSwitchRequired != pdFALSE ) \
{ \
portYIELD(); \
}
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) \
{ \
portYIELD(); \
}
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

376
portable/GCC/H8S2329/port.c
View file

@ -31,22 +31,22 @@
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the H8S port.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the H8S port.
*----------------------------------------------------------*/
/*-----------------------------------------------------------*/
/* When the task starts interrupts should be enabled. */
#define portINITIAL_CCR ( ( StackType_t ) 0x00 )
#define portINITIAL_CCR ( ( StackType_t ) 0x00 )
/* Hardware specific constants used to generate the RTOS tick from the TPU. */
#define portCLEAR_ON_TGRA_COMPARE_MATCH ( ( uint8_t ) 0x20 )
#define portCLOCK_DIV_64 ( ( uint8_t ) 0x03 )
#define portCLOCK_DIV ( ( uint32_t ) 64 )
#define portTGRA_INTERRUPT_ENABLE ( ( uint8_t ) 0x01 )
#define portTIMER_CHANNEL ( ( uint8_t ) 0x02 )
#define portMSTP13 ( ( uint16_t ) 0x2000 )
#define portCLEAR_ON_TGRA_COMPARE_MATCH ( ( uint8_t ) 0x20 )
#define portCLOCK_DIV_64 ( ( uint8_t ) 0x03 )
#define portCLOCK_DIV ( ( uint32_t ) 64 )
#define portTGRA_INTERRUPT_ENABLE ( ( uint8_t ) 0x01 )
#define portTIMER_CHANNEL ( ( uint8_t ) 0x02 )
#define portMSTP13 ( ( uint16_t ) 0x2000 )
/*
* Setup TPU channel one for the RTOS tick at the requested frequency.
@ -56,167 +56,164 @@ static void prvSetupTimerInterrupt( void );
/*
* The ISR used by portYIELD(). This is installed as a trap handler.
*/
void vPortYield( void ) __attribute__( ( saveall, interrupt_handler ) );
void vPortYield( void ) __attribute__ ( ( saveall, interrupt_handler ) );
/*-----------------------------------------------------------*/
/*
* See header file for description.
/*
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
uint32_t ulValue;
uint32_t ulValue;
/* This requires an even address. */
ulValue = ( uint32_t ) pxTopOfStack;
/* This requires an even address. */
ulValue = ( uint32_t ) pxTopOfStack;
if( ulValue & 1UL )
{
pxTopOfStack = pxTopOfStack - 1;
}
if( ulValue & 1UL )
{
pxTopOfStack = pxTopOfStack - 1;
}
/* Place a few bytes of known values on the bottom of the stack.
This is just useful for debugging. */
pxTopOfStack--;
*pxTopOfStack = 0xaa;
pxTopOfStack--;
*pxTopOfStack = 0xbb;
pxTopOfStack--;
*pxTopOfStack = 0xcc;
pxTopOfStack--;
*pxTopOfStack = 0xdd;
/* Place a few bytes of known values on the bottom of the stack.
* This is just useful for debugging. */
pxTopOfStack--;
*pxTopOfStack = 0xaa;
pxTopOfStack--;
*pxTopOfStack = 0xbb;
pxTopOfStack--;
*pxTopOfStack = 0xcc;
pxTopOfStack--;
*pxTopOfStack = 0xdd;
/* The initial stack mimics an interrupt stack. First there is the program
counter (24 bits). */
ulValue = ( uint32_t ) pxCode;
/* The initial stack mimics an interrupt stack. First there is the program
* counter (24 bits). */
ulValue = ( uint32_t ) pxCode;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
ulValue >>= 8UL;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
ulValue >>= 8UL;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
ulValue >>= 8UL;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
ulValue >>= 8UL;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
/* Followed by the CCR. */
pxTopOfStack--;
*pxTopOfStack = portINITIAL_CCR;
/* Followed by the CCR. */
pxTopOfStack--;
*pxTopOfStack = portINITIAL_CCR;
/* Next all the general purpose registers - with the parameters being passed
in ER0. The parameter order must match that used by the compiler when the
"saveall" function attribute is used. */
/* Next all the general purpose registers - with the parameters being passed
* in ER0. The parameter order must match that used by the compiler when the
* "saveall" function attribute is used. */
/* ER6 */
pxTopOfStack--;
*pxTopOfStack = 0x66;
pxTopOfStack--;
*pxTopOfStack = 0x66;
pxTopOfStack--;
*pxTopOfStack = 0x66;
pxTopOfStack--;
*pxTopOfStack = 0x66;
/* ER0 */
ulValue = ( uint32_t ) pvParameters;
/* ER6 */
pxTopOfStack--;
*pxTopOfStack = 0x66;
pxTopOfStack--;
*pxTopOfStack = 0x66;
pxTopOfStack--;
*pxTopOfStack = 0x66;
pxTopOfStack--;
*pxTopOfStack = 0x66;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
ulValue >>= 8UL;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
ulValue >>= 8UL;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
ulValue >>= 8UL;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
/* ER1 */
pxTopOfStack--;
*pxTopOfStack = 0x11;
pxTopOfStack--;
*pxTopOfStack = 0x11;
pxTopOfStack--;
*pxTopOfStack = 0x11;
pxTopOfStack--;
*pxTopOfStack = 0x11;
/* ER0 */
ulValue = ( uint32_t ) pvParameters;
/* ER2 */
pxTopOfStack--;
*pxTopOfStack = 0x22;
pxTopOfStack--;
*pxTopOfStack = 0x22;
pxTopOfStack--;
*pxTopOfStack = 0x22;
pxTopOfStack--;
*pxTopOfStack = 0x22;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
ulValue >>= 8UL;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
ulValue >>= 8UL;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
pxTopOfStack--;
ulValue >>= 8UL;
*pxTopOfStack = ( StackType_t ) ( ulValue & 0xff );
/* ER3 */
pxTopOfStack--;
*pxTopOfStack = 0x33;
pxTopOfStack--;
*pxTopOfStack = 0x33;
pxTopOfStack--;
*pxTopOfStack = 0x33;
pxTopOfStack--;
*pxTopOfStack = 0x33;
/* ER1 */
pxTopOfStack--;
*pxTopOfStack = 0x11;
pxTopOfStack--;
*pxTopOfStack = 0x11;
pxTopOfStack--;
*pxTopOfStack = 0x11;
pxTopOfStack--;
*pxTopOfStack = 0x11;
/* ER4 */
pxTopOfStack--;
*pxTopOfStack = 0x44;
pxTopOfStack--;
*pxTopOfStack = 0x44;
pxTopOfStack--;
*pxTopOfStack = 0x44;
pxTopOfStack--;
*pxTopOfStack = 0x44;
/* ER2 */
pxTopOfStack--;
*pxTopOfStack = 0x22;
pxTopOfStack--;
*pxTopOfStack = 0x22;
pxTopOfStack--;
*pxTopOfStack = 0x22;
pxTopOfStack--;
*pxTopOfStack = 0x22;
/* ER5 */
pxTopOfStack--;
*pxTopOfStack = 0x55;
pxTopOfStack--;
*pxTopOfStack = 0x55;
pxTopOfStack--;
*pxTopOfStack = 0x55;
pxTopOfStack--;
*pxTopOfStack = 0x55;
/* ER3 */
pxTopOfStack--;
*pxTopOfStack = 0x33;
pxTopOfStack--;
*pxTopOfStack = 0x33;
pxTopOfStack--;
*pxTopOfStack = 0x33;
pxTopOfStack--;
*pxTopOfStack = 0x33;
/* ER4 */
pxTopOfStack--;
*pxTopOfStack = 0x44;
pxTopOfStack--;
*pxTopOfStack = 0x44;
pxTopOfStack--;
*pxTopOfStack = 0x44;
pxTopOfStack--;
*pxTopOfStack = 0x44;
/* ER5 */
pxTopOfStack--;
*pxTopOfStack = 0x55;
pxTopOfStack--;
*pxTopOfStack = 0x55;
pxTopOfStack--;
*pxTopOfStack = 0x55;
pxTopOfStack--;
*pxTopOfStack = 0x55;
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
extern void * pxCurrentTCB;
extern void * pxCurrentTCB;
/* Setup the hardware to generate the tick. */
prvSetupTimerInterrupt();
/* Setup the hardware to generate the tick. */
prvSetupTimerInterrupt();
/* Restore the context of the first task that is going to run. This
* mirrors the function epilogue code generated by the compiler when the
* "saveall" function attribute is used. */
asm volatile (
"MOV.L @_pxCurrentTCB, ER6 \n\t"
"MOV.L @ER6, ER7 \n\t"
"LDM.L @SP+, (ER4-ER5) \n\t"
"LDM.L @SP+, (ER0-ER3) \n\t"
"MOV.L @ER7+, ER6 \n\t"
"RTE \n\t"
);
/* Restore the context of the first task that is going to run. This
mirrors the function epilogue code generated by the compiler when the
"saveall" function attribute is used. */
asm volatile (
"MOV.L @_pxCurrentTCB, ER6 \n\t"
"MOV.L @ER6, ER7 \n\t"
"LDM.L @SP+, (ER4-ER5) \n\t"
"LDM.L @SP+, (ER0-ER3) \n\t"
"MOV.L @ER7+, ER6 \n\t"
"RTE \n\t"
);
( void ) pxCurrentTCB;
( void ) pxCurrentTCB;
/* Should not get here. */
return pdTRUE;
/* Should not get here. */
return pdTRUE;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the h8 port will get stopped. */
/* It is unlikely that the h8 port will get stopped. */
}
/*-----------------------------------------------------------*/
@ -227,56 +224,56 @@ void vPortEndScheduler( void )
*/
void vPortYield( void )
{
portSAVE_STACK_POINTER();
vTaskSwitchContext();
portRESTORE_STACK_POINTER();
portSAVE_STACK_POINTER();
vTaskSwitchContext();
portRESTORE_STACK_POINTER();
}
/*-----------------------------------------------------------*/
/*
* The interrupt handler installed for the RTOS tick depends on whether the
* preemptive or cooperative scheduler is being used.
/*
* The interrupt handler installed for the RTOS tick depends on whether the
* preemptive or cooperative scheduler is being used.
*/
#if ( configUSE_PREEMPTION == 1 )
#if( configUSE_PREEMPTION == 1 )
/*
* The preemptive scheduler is used so the ISR calls vTaskSwitchContext().
* The function prologue saves the context so all we have to do is save
* the stack pointer.
*/
void vTickISR( void ) __attribute__( ( saveall, interrupt_handler ) );
void vTickISR( void )
{
portSAVE_STACK_POINTER();
/*
* The preemptive scheduler is used so the ISR calls vTaskSwitchContext().
* The function prologue saves the context so all we have to do is save
* the stack pointer.
*/
void vTickISR( void ) __attribute__ ( ( saveall, interrupt_handler ) );
void vTickISR( void )
{
portSAVE_STACK_POINTER();
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
/* Clear the interrupt. */
TSR1 &= ~0x01;
/* Clear the interrupt. */
TSR1 &= ~0x01;
portRESTORE_STACK_POINTER();
}
portRESTORE_STACK_POINTER();
}
#else
#else /* if ( configUSE_PREEMPTION == 1 ) */
/*
* The cooperative scheduler is being used so all we have to do is
* periodically increment the tick. This can just be a normal ISR and
* the "saveall" attribute is not required.
*/
void vTickISR( void ) __attribute__ ( ( interrupt_handler ) );
void vTickISR( void )
{
xTaskIncrementTick();
/*
* The cooperative scheduler is being used so all we have to do is
* periodically increment the tick. This can just be a normal ISR and
* the "saveall" attribute is not required.
*/
void vTickISR( void ) __attribute__( ( interrupt_handler ) );
void vTickISR( void )
{
xTaskIncrementTick();
/* Clear the interrupt. */
TSR1 &= ~0x01;
}
/* Clear the interrupt. */
TSR1 &= ~0x01;
}
#endif /* if ( configUSE_PREEMPTION == 1 ) */
#endif
/*-----------------------------------------------------------*/
/*
@ -284,20 +281,23 @@ void vPortYield( void )
*/
static void prvSetupTimerInterrupt( void )
{
const uint32_t ulCompareMatch = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) / portCLOCK_DIV;
const uint32_t ulCompareMatch = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) / portCLOCK_DIV;
/* Turn the module on. */
MSTPCR &= ~portMSTP13;
/* Turn the module on. */
MSTPCR &= ~portMSTP13;
/* Configure timer 1. */
TCR1 = portCLEAR_ON_TGRA_COMPARE_MATCH | portCLOCK_DIV_64;
/* Configure timer 1. */
TCR1 = portCLEAR_ON_TGRA_COMPARE_MATCH | portCLOCK_DIV_64;
/* Configure the compare match value for a tick of configTICK_RATE_HZ. */
TGR1A = ulCompareMatch;
/* Configure the compare match value for a tick of configTICK_RATE_HZ. */
TGR1A = ulCompareMatch;
/* Start the timer and enable the interrupt - we can do this here as
* interrupts are globally disabled when this function is called. */
TIER1 |= portTGRA_INTERRUPT_ENABLE;
TSTR |= portTIMER_CHANNEL;
/* Start the timer and enable the interrupt - we can do this here as
interrupts are globally disabled when this function is called. */
TIER1 |= portTGRA_INTERRUPT_ENABLE;
TSTR |= portTIMER_CHANNEL;
}
/*-----------------------------------------------------------*/

130
portable/GCC/H8S2329/portmacro.h
View file

@ -27,11 +27,11 @@
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -44,95 +44,95 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portBYTE_ALIGNMENT 2
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portYIELD() asm volatile ( "TRAPA #0" )
#define portNOP() asm volatile ( "NOP" )
#define portBYTE_ALIGNMENT 2
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portYIELD() asm volatile( "TRAPA #0" )
#define portNOP() asm volatile( "NOP" )
/*-----------------------------------------------------------*/
/* Critical section handling. */
#define portENABLE_INTERRUPTS() asm volatile ( "ANDC #0x7F, CCR");
#define portDISABLE_INTERRUPTS() asm volatile ( "ORC #0x80, CCR" );
#define portENABLE_INTERRUPTS() asm volatile( "ANDC #0x7F, CCR" );
#define portDISABLE_INTERRUPTS() asm volatile( "ORC #0x80, CCR" );
/* Push the CCR then disable interrupts. */
#define portENTER_CRITICAL() \
asm volatile ( "STC CCR, @-ER7" ); \
portDISABLE_INTERRUPTS();
#define portENTER_CRITICAL() asm volatile( "STC CCR, @-ER7" ); \
portDISABLE_INTERRUPTS();
/* Pop the CCR to set the interrupt masking back to its previous state. */
#define portEXIT_CRITICAL() asm volatile ( "LDC @ER7+, CCR" );
#define portEXIT_CRITICAL() asm volatile( "LDC @ER7+, CCR" );
/*-----------------------------------------------------------*/
/* Task utilities. */
/* Context switch macros. These macros are very simple as the context
* is saved simply by selecting the saveall attribute of the context switch
* interrupt service routines. These macros save and restore the stack
* pointer to the TCB. */
is saved simply by selecting the saveall attribute of the context switch
interrupt service routines. These macros save and restore the stack
pointer to the TCB. */
#define portSAVE_STACK_POINTER() \
extern void * pxCurrentTCB; \
\
asm volatile ( \
"MOV.L @_pxCurrentTCB, ER5 \n\t"\
"MOV.L ER7, @ER5 \n\t"\
); \
( void ) pxCurrentTCB;
#define portSAVE_STACK_POINTER() \
extern void* pxCurrentTCB; \
\
asm volatile( \
"MOV.L @_pxCurrentTCB, ER5 \n\t" \
"MOV.L ER7, @ER5 \n\t" \
); \
( void ) pxCurrentTCB;
#define portRESTORE_STACK_POINTER() \
extern void * pxCurrentTCB; \
\
asm volatile ( \
"MOV.L @_pxCurrentTCB, ER5 \n\t"\
"MOV.L @ER5, ER7 \n\t"\
); \
( void ) pxCurrentTCB;
#define portRESTORE_STACK_POINTER() \
extern void* pxCurrentTCB; \
\
asm volatile( \
"MOV.L @_pxCurrentTCB, ER5 \n\t" \
"MOV.L @ER5, ER7 \n\t" \
); \
( void ) pxCurrentTCB;
/*-----------------------------------------------------------*/
/* Macros to allow a context switch from within an application ISR. */
#define portENTER_SWITCHING_ISR() portSAVE_STACK_POINTER(); {
#define portEXIT_SWITCHING_ISR( x ) \
if( x ) \
{ \
extern void vTaskSwitchContext( void ); \
vTaskSwitchContext(); \
} \
} \
portRESTORE_STACK_POINTER();
#define portENTER_SWITCHING_ISR() portSAVE_STACK_POINTER(); {
#define portEXIT_SWITCHING_ISR( x ) \
if( x ) \
{ \
extern void vTaskSwitchContext( void ); \
vTaskSwitchContext(); \
} \
} portRESTORE_STACK_POINTER();
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

213
portable/GCC/HCS12/port.c
View file

@ -35,144 +35,143 @@
#include <sys/ports_def.h>
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the HCS12 port.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the HCS12 port.
*----------------------------------------------------------*/
/*
* Configure a timer to generate the RTOS tick at the frequency specified
* Configure a timer to generate the RTOS tick at the frequency specified
* within FreeRTOSConfig.h.
*/
static void prvSetupTimerInterrupt( void );
/* NOTE: Interrupt service routines must be in non-banked memory - as does the
* scheduler startup function. */
#define ATTR_NEAR __attribute__( ( near ) )
scheduler startup function. */
#define ATTR_NEAR __attribute__((near))
/* Manual context switch function. This is the SWI ISR. */
/* __attribute__((interrupt)) */
// __attribute__((interrupt))
void ATTR_NEAR vPortYield( void );
/* Tick context switch function. This is the timer ISR. */
/* __attribute__((interrupt)) */
// __attribute__((interrupt))
void ATTR_NEAR vPortTickInterrupt( void );
/* Function in non-banked memory which actually switches to first task. */
BaseType_t ATTR_NEAR xStartSchedulerNear( void );
/* Calls to portENTER_CRITICAL() can be nested. When they are nested the
* critical section should not be left (i.e. interrupts should not be re-enabled)
* until the nesting depth reaches 0. This variable simply tracks the nesting
* depth. Each task maintains it's own critical nesting depth variable so
* uxCriticalNesting is saved and restored from the task stack during a context
* switch. */
volatile UBaseType_t uxCriticalNesting = 0x80; /* un-initialized */
/* Calls to portENTER_CRITICAL() can be nested. When they are nested the
critical section should not be left (i.e. interrupts should not be re-enabled)
until the nesting depth reaches 0. This variable simply tracks the nesting
depth. Each task maintains it's own critical nesting depth variable so
uxCriticalNesting is saved and restored from the task stack during a context
switch. */
volatile UBaseType_t uxCriticalNesting = 0x80; // un-initialized
/*-----------------------------------------------------------*/
/*
* See header file for description.
/*
* See header file for description.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
/* Setup the initial stack of the task. The stack is set exactly as
* expected by the portRESTORE_CONTEXT() macro. In this case the stack as
* expected by the HCS12 RTI instruction. */
/* The address of the task function is placed in the stack byte at a time. */
*pxTopOfStack = ( StackType_t ) *( ( ( StackType_t * ) ( &pxCode ) ) + 1 );
*--pxTopOfStack = ( StackType_t ) *( ( ( StackType_t * ) ( &pxCode ) ) + 0 );
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro. In this case the stack as
expected by the HCS12 RTI instruction. */
/* Next are all the registers that form part of the task context. */
/* Y register */
*--pxTopOfStack = ( StackType_t ) 0xff;
*--pxTopOfStack = ( StackType_t ) 0xee;
/* The address of the task function is placed in the stack byte at a time. */
*pxTopOfStack = ( StackType_t ) *( ((StackType_t *) (&pxCode) ) + 1 );
*--pxTopOfStack = ( StackType_t ) *( ((StackType_t *) (&pxCode) ) + 0 );
/* X register */
*--pxTopOfStack = ( StackType_t ) 0xdd;
*--pxTopOfStack = ( StackType_t ) 0xcc;
/* Next are all the registers that form part of the task context. */
/* A register contains parameter high byte. */
*--pxTopOfStack = ( StackType_t ) *( ( ( StackType_t * ) ( &pvParameters ) ) + 0 );
/* Y register */
*--pxTopOfStack = ( StackType_t ) 0xff;
*--pxTopOfStack = ( StackType_t ) 0xee;
/* B register contains parameter low byte. */
*--pxTopOfStack = ( StackType_t ) *( ( ( StackType_t * ) ( &pvParameters ) ) + 1 );
/* X register */
*--pxTopOfStack = ( StackType_t ) 0xdd;
*--pxTopOfStack = ( StackType_t ) 0xcc;
/* A register contains parameter high byte. */
*--pxTopOfStack = ( StackType_t ) *( ((StackType_t *) (&pvParameters) ) + 0 );
/* CCR: Note that when the task starts interrupts will be enabled since
* "I" bit of CCR is cleared */
*--pxTopOfStack = ( StackType_t ) 0x80; /* keeps Stop disabled (MCU default) */
/* B register contains parameter low byte. */
*--pxTopOfStack = ( StackType_t ) *( ((StackType_t *) (&pvParameters) ) + 1 );
/* tmp softregs used by GCC. Values right now don't matter. */
__asm( "\n\
/* CCR: Note that when the task starts interrupts will be enabled since
"I" bit of CCR is cleared */
*--pxTopOfStack = ( StackType_t ) 0x80; // keeps Stop disabled (MCU default)
/* tmp softregs used by GCC. Values right now don't matter. */
__asm("\n\
movw _.frame, 2,-%0 \n\
movw _.tmp, 2,-%0 \n\
movw _.z, 2,-%0 \n\
movw _.xy, 2,-%0 \n\
;movw _.d2, 2,-%0 \n\
;movw _.d1, 2,-%0 \n\
" : "=A" ( pxTopOfStack ) : "0" ( pxTopOfStack ) );
": "=A"(pxTopOfStack) : "0"(pxTopOfStack) );
#ifdef BANKED_MODEL
/* The page of the task. */
*--pxTopOfStack = 0x30; /* can only directly start in PPAGE 0x30 */
#endif
/* The critical nesting depth is initialised with 0 (meaning not in
* a critical section). */
*--pxTopOfStack = ( StackType_t ) 0x00;
#ifdef BANKED_MODEL
/* The page of the task. */
*--pxTopOfStack = 0x30; // can only directly start in PPAGE 0x30
#endif
/* The critical nesting depth is initialised with 0 (meaning not in
a critical section). */
*--pxTopOfStack = ( StackType_t ) 0x00;
return pxTopOfStack;
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the HCS12 port will get stopped. */
/* It is unlikely that the HCS12 port will get stopped. */
}
/*-----------------------------------------------------------*/
static void prvSetupTimerInterrupt( void )
{
/* Enable hardware RTI timer */
/* Ignores configTICK_RATE_HZ */
RTICTL = 0x50; /* 16 MHz xtal: 976.56 Hz, 1024mS */
CRGINT |= 0x80; /* RTIE */
/* Enable hardware RTI timer */
/* Ignores configTICK_RATE_HZ */
RTICTL = 0x50; // 16 MHz xtal: 976.56 Hz, 1024mS
CRGINT |= 0x80; // RTIE
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* xPortStartScheduler() does not start the scheduler directly because
* the header file containing the xPortStartScheduler() prototype is part
* of the common kernel code, and therefore cannot use the CODE_SEG pragma.
* Instead it simply calls the locally defined xNearStartScheduler() -
* which does use the CODE_SEG pragma. */
/* xPortStartScheduler() does not start the scheduler directly because
the header file containing the xPortStartScheduler() prototype is part
of the common kernel code, and therefore cannot use the CODE_SEG pragma.
Instead it simply calls the locally defined xNearStartScheduler() -
which does use the CODE_SEG pragma. */
int16_t register d;
__asm( "jmp xStartSchedulerNear ; will never return": "=d" ( d ) );
return d;
int16_t register d;
__asm ("jmp xStartSchedulerNear ; will never return": "=d"(d));
return d;
}
/*-----------------------------------------------------------*/
BaseType_t xStartSchedulerNear( void )
{
/* Configure the timer that will generate the RTOS tick. Interrupts are
* disabled when this function is called. */
prvSetupTimerInterrupt();
/* Configure the timer that will generate the RTOS tick. Interrupts are
disabled when this function is called. */
prvSetupTimerInterrupt();
/* Restore the context of the first task. */
portRESTORE_CONTEXT();
/* Restore the context of the first task. */
portRESTORE_CONTEXT();
portISR_TAIL();
portISR_TAIL();
/* Should not get here! */
return pdFALSE;
/* Should not get here! */
return pdFALSE;
}
/*-----------------------------------------------------------*/
@ -186,53 +185,53 @@ BaseType_t xStartSchedulerNear( void )
*/
void vPortYield( void )
{
portISR_HEAD();
portISR_HEAD();
/* NOTE: This is the trap routine (swi) although not defined as a trap.
It will fill the stack the same way as an ISR in order to mix preemtion
and cooperative yield. */
/* NOTE: This is the trap routine (swi) although not defined as a trap.
* It will fill the stack the same way as an ISR in order to mix preemtion
* and cooperative yield. */
portSAVE_CONTEXT();
vTaskSwitchContext();
portRESTORE_CONTEXT();
portSAVE_CONTEXT();
vTaskSwitchContext();
portRESTORE_CONTEXT();
portISR_TAIL();
portISR_TAIL();
}
/*-----------------------------------------------------------*/
/*
* RTOS tick interrupt service routine. If the cooperative scheduler is
* being used then this simply increments the tick count. If the
* RTOS tick interrupt service routine. If the cooperative scheduler is
* being used then this simply increments the tick count. If the
* preemptive scheduler is being used a context switch can occur.
*/
void vPortTickInterrupt( void )
{
portISR_HEAD();
portISR_HEAD();
/* Clear tick timer flag */
CRGFLG = 0x80;
/* Clear tick timer flag */
CRGFLG = 0x80;
#if configUSE_PREEMPTION == 1
{
/* A context switch might happen so save the context. */
portSAVE_CONTEXT();
#if configUSE_PREEMPTION == 1
{
/* A context switch might happen so save the context. */
portSAVE_CONTEXT();
/* Increment the tick ... */
if( xTaskIncrementTick() != pdFALSE )
{
/* A context switch is necessary. */
vTaskSwitchContext();
}
/* Increment the tick ... */
if( xTaskIncrementTick() != pdFALSE )
{
/* A context switch is necessary. */
vTaskSwitchContext();
}
/* Restore the context of a task - which may be a different task
* to that interrupted. */
portRESTORE_CONTEXT();
}
#else /* if configUSE_PREEMPTION == 1 */
{
xTaskIncrementTick();
}
#endif /* if configUSE_PREEMPTION == 1 */
/* Restore the context of a task - which may be a different task
to that interrupted. */
portRESTORE_CONTEXT();
}
#else
{
xTaskIncrementTick();
}
#endif
portISR_TAIL();
portISR_TAIL();
}

202
portable/GCC/HCS12/portmacro.h
View file

@ -27,11 +27,11 @@
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -44,38 +44,38 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint8_t
#define portBASE_TYPE char
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef signed char BaseType_t;
typedef unsigned char UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portBYTE_ALIGNMENT 1
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portYIELD() __asm( "swi" );
#define portBYTE_ALIGNMENT 1
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portYIELD() __asm( "swi" );
/*-----------------------------------------------------------*/
/* Critical section handling. */
#define portENABLE_INTERRUPTS() __asm( "cli" )
#define portDISABLE_INTERRUPTS() __asm( "sei" )
#define portENABLE_INTERRUPTS() __asm( "cli" )
#define portDISABLE_INTERRUPTS() __asm( "sei" )
/*
* Disable interrupts before incrementing the count of critical section nesting.
@ -83,29 +83,29 @@
* re-enabled. Once interrupts are disabled the nesting count can be accessed
* directly. Each task maintains its own nesting count.
*/
#define portENTER_CRITICAL() \
{ \
extern volatile UBaseType_t uxCriticalNesting; \
\
portDISABLE_INTERRUPTS(); \
uxCriticalNesting++; \
}
#define portENTER_CRITICAL() \
{ \
extern volatile UBaseType_t uxCriticalNesting; \
\
portDISABLE_INTERRUPTS(); \
uxCriticalNesting++; \
}
/*
* Interrupts are disabled so we can access the nesting count directly. If the
* nesting is found to be 0 (no nesting) then we are leaving the critical
* section and interrupts can be re-enabled.
*/
#define portEXIT_CRITICAL() \
{ \
extern volatile UBaseType_t uxCriticalNesting; \
\
uxCriticalNesting--; \
if( uxCriticalNesting == 0 ) \
{ \
portENABLE_INTERRUPTS(); \
} \
}
#define portEXIT_CRITICAL() \
{ \
extern volatile UBaseType_t uxCriticalNesting; \
\
uxCriticalNesting--; \
if( uxCriticalNesting == 0 ) \
{ \
portENABLE_INTERRUPTS(); \
} \
}
/*-----------------------------------------------------------*/
/* Task utilities. */
@ -120,16 +120,15 @@
* register is also stored as part of the tasks context.
*/
#ifdef BANKED_MODEL
/*
* Load the stack pointer for the task, then pull the critical nesting
* count and PPAGE register from the stack. The remains of the
* context are restored by the RTI instruction.
*/
#define portRESTORE_CONTEXT() \
{ \
__asm( " \n\
#ifdef BANKED_MODEL
/*
* Load the stack pointer for the task, then pull the critical nesting
* count and PPAGE register from the stack. The remains of the
* context are restored by the RTI instruction.
*/
#define portRESTORE_CONTEXT() \
{ \
__asm( " \n\
.globl pxCurrentTCB ; void * \n\
.globl uxCriticalNesting ; char \n\
\n\
@ -138,17 +137,17 @@
\n\
movb 1,sp+,uxCriticalNesting \n\
movb 1,sp+,0x30 ; PPAGE \n\
" ); \
}
" ); \
}
/*
* By the time this macro is called the processor has already stacked the
* registers. Simply stack the nesting count and PPAGE value, then save
* the task stack pointer.
*/
#define portSAVE_CONTEXT() \
{ \
__asm( " \n\
/*
* By the time this macro is called the processor has already stacked the
* registers. Simply stack the nesting count and PPAGE value, then save
* the task stack pointer.
*/
#define portSAVE_CONTEXT() \
{ \
__asm( " \n\
.globl pxCurrentTCB ; void * \n\
.globl uxCriticalNesting ; char \n\
\n\
@ -157,18 +156,18 @@
\n\
ldx pxCurrentTCB \n\
sts 0,x ; Stack \n\
" ); \
}
#else /* ifdef BANKED_MODEL */
" ); \
}
#else
/*
* These macros are as per the BANKED versions above, but without saving
* and restoring the PPAGE register.
*/
/*
* These macros are as per the BANKED versions above, but without saving
* and restoring the PPAGE register.
*/
#define portRESTORE_CONTEXT() \
{ \
__asm( " \n\
#define portRESTORE_CONTEXT() \
{ \
__asm( " \n\
.globl pxCurrentTCB ; void * \n\
.globl uxCriticalNesting ; char \n\
\n\
@ -176,12 +175,12 @@
lds 0,x ; Stack \n\
\n\
movb 1,sp+,uxCriticalNesting \n\
" ); \
}
" ); \
}
#define portSAVE_CONTEXT() \
{ \
__asm( " \n\
#define portSAVE_CONTEXT() \
{ \
__asm( " \n\
.globl pxCurrentTCB ; void * \n\
.globl uxCriticalNesting ; char \n\
\n\
@ -189,29 +188,29 @@
\n\
ldx pxCurrentTCB \n\
sts 0,x ; Stack \n\
" ); \
}
#endif /* ifdef BANKED_MODEL */
" ); \
}
#endif
/*
* Utility macros to save/restore correct software registers for GCC. This is
* useful when GCC does not generate appropriate ISR head/tail code.
*/
#define portISR_HEAD() \
{ \
__asm( " \n\
#define portISR_HEAD() \
{ \
__asm(" \n\
movw _.frame, 2,-sp \n\
movw _.tmp, 2,-sp \n\
movw _.z, 2,-sp \n\
movw _.xy, 2,-sp \n\
;movw _.d2, 2,-sp \n\
;movw _.d1, 2,-sp \n\
" ); \
}
"); \
}
#define portISR_TAIL() \
{ \
__asm( " \n\
#define portISR_TAIL() \
{ \
__asm(" \n\
movw 2,sp+, _.xy \n\
movw 2,sp+, _.z \n\
movw 2,sp+, _.tmp \n\
@ -219,8 +218,8 @@
;movw 2,sp+, _.d1 \n\
;movw 2,sp+, _.d2 \n\
rti \n\
" ); \
}
"); \
}
/*
* Utility macro to call macros above in correct order in order to perform a
@ -229,18 +228,19 @@
* variables portYIELD() should be used in it's place.
*/
#define portTASK_SWITCH_FROM_ISR() \
portSAVE_CONTEXT(); \
vTaskSwitchContext(); \
portRESTORE_CONTEXT();
#define portTASK_SWITCH_FROM_ISR() \
portSAVE_CONTEXT(); \
vTaskSwitchContext(); \
portRESTORE_CONTEXT();
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

141
portable/GCC/IA32_flat/ISR_Support.h
View file

@ -25,102 +25,103 @@
* 1 tab == 4 spaces!
*/
.extern ulTopOfSystemStack
.extern ulInterruptNesting
.extern ulTopOfSystemStack
.extern ulInterruptNesting
/*-----------------------------------------------------------*/
.macro portFREERTOS_INTERRUPT_ENTRY
.macro portFREERTOS_INTERRUPT_ENTRY
/* Save general purpose registers. */
pusha
/* Save general purpose registers. */
pusha
/* If ulInterruptNesting is zero the rest of the task context will need
* saving and a stack switch might be required. */
movl ulInterruptNesting, % eax
test % eax, % eax
jne 2f
/* If ulInterruptNesting is zero the rest of the task context will need
saving and a stack switch might be required. */
movl ulInterruptNesting, %eax
test %eax, %eax
jne 2f
/* Interrupts are not nested, so save the rest of the task context. */
.if configSUPPORT_FPU == 1
/* Interrupts are not nested, so save the rest of the task context. */
.if configSUPPORT_FPU == 1
/* If the task has a buffer allocated to save the FPU context then
* save the FPU context now. */
movl pucPortTaskFPUContextBuffer, % eax
test % eax, % eax
je 1f
fnsave( % eax ) /* Save FLOP context into ucTempFPUBuffer array. */
fwait
/* If the task has a buffer allocated to save the FPU context then
save the FPU context now. */
movl pucPortTaskFPUContextBuffer, %eax
test %eax, %eax
je 1f
fnsave ( %eax ) /* Save FLOP context into ucTempFPUBuffer array. */
fwait
1 :
/* Save the address of the FPU context, if any. */
push pucPortTaskFPUContextBuffer
1:
/* Save the address of the FPU context, if any. */
push pucPortTaskFPUContextBuffer
.endif /* configSUPPORT_FPU */
.endif /* configSUPPORT_FPU */
/* Find the TCB. */
movl pxCurrentTCB, % eax
/* Find the TCB. */
movl pxCurrentTCB, %eax
/* Stack location is first item in the TCB. */
movl % esp, ( % eax )
/* Stack location is first item in the TCB. */
movl %esp, (%eax)
/* Switch stacks. */
movl ulTopOfSystemStack, % esp
movl % esp, % ebp
/* Switch stacks. */
movl ulTopOfSystemStack, %esp
movl %esp, %ebp
2 :
/* Increment nesting count. */
add $1, ulInterruptNesting
2:
/* Increment nesting count. */
add $1, ulInterruptNesting
.endm
.endm
/*-----------------------------------------------------------*/
.macro portINTERRUPT_EPILOGUE
.macro portINTERRUPT_EPILOGUE
cli
sub $1, ulInterruptNesting
cli
sub $1, ulInterruptNesting
/* If the nesting has unwound to zero. */
movl ulInterruptNesting, % eax
test % eax, % eax
jne 2f
/* If the nesting has unwound to zero. */
movl ulInterruptNesting, %eax
test %eax, %eax
jne 2f
/* If a yield was requested then select a new TCB now. */
movl ulPortYieldPending, % eax
test % eax, % eax
je 1f
movl $0, ulPortYieldPending
call vTaskSwitchContext
/* If a yield was requested then select a new TCB now. */
movl ulPortYieldPending, %eax
test %eax, %eax
je 1f
movl $0, ulPortYieldPending
call vTaskSwitchContext
1 :
/* Stack location is first item in the TCB. */
movl pxCurrentTCB, % eax movl( % eax ), % esp
1:
/* Stack location is first item in the TCB. */
movl pxCurrentTCB, %eax
movl (%eax), %esp
.if configSUPPORT_FPU == 1
.if configSUPPORT_FPU == 1
/* Restore address of task's FPU context buffer. */
pop pucPortTaskFPUContextBuffer
/* Restore address of task's FPU context buffer. */
pop pucPortTaskFPUContextBuffer
/* If the task has a buffer allocated in which its FPU context is saved,
* then restore it now. */
movl pucPortTaskFPUContextBuffer, % eax
test % eax, % eax
je 1f
frstor( % eax )
1 :
.endif
/* If the task has a buffer allocated in which its FPU context is saved,
then restore it now. */
movl pucPortTaskFPUContextBuffer, %eax
test %eax, %eax
je 1f
frstor ( %eax )
1:
.endif
2 :
popa
2:
popa
.endm
.endm
/*-----------------------------------------------------------*/
.macro portFREERTOS_INTERRUPT_EXIT
.macro portFREERTOS_INTERRUPT_EXIT
portINTERRUPT_EPILOGUE
/* EOI. */
movl $0x00, ( 0xFEE000B0 )
iret
portINTERRUPT_EPILOGUE
/* EOI. */
movl $0x00, (0xFEE000B0)
iret
.endm
.endm

785
portable/GCC/IA32_flat/port.c
View file

File diff suppressed because it is too large Load diff

366
portable/GCC/IA32_flat/portmacro.h
View file

@ -26,11 +26,11 @@
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
@ -43,255 +43,249 @@
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef uint32_t TickType_t;
#define portMAX_DELAY ( ( TickType_t ) 0xffffffffUL )
typedef uint32_t TickType_t;
#define portMAX_DELAY ( ( TickType_t ) 0xffffffffUL )
/*-----------------------------------------------------------*/
/* Hardware specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 32
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 32
/*-----------------------------------------------------------*/
/* Task utilities. */
/* The interrupt priority (for vectors 16 to 255) is determined using vector/16.
* The quotient is rounded to the nearest integer with 1 being the lowest priority
* and 15 is the highest. Therefore the following two interrupts are at the lowest
* priority. *NOTE 1* If the yield vector is changed then it must also be changed
* in the portYIELD_INTERRUPT definition immediately below. */
#define portAPIC_TIMER_INT_VECTOR ( 0x21 )
#define portAPIC_YIELD_INT_VECTOR ( 0x20 )
The quotient is rounded to the nearest integer with 1 being the lowest priority
and 15 is the highest. Therefore the following two interrupts are at the lowest
priority. *NOTE 1* If the yield vector is changed then it must also be changed
in the portYIELD_INTERRUPT definition immediately below. */
#define portAPIC_TIMER_INT_VECTOR ( 0x21 )
#define portAPIC_YIELD_INT_VECTOR ( 0x20 )
/* Build yield interrupt instruction. */
#define portYIELD_INTERRUPT "int $0x20"
#define portYIELD_INTERRUPT "int $0x20"
/* APIC register addresses. */
#define portAPIC_EOI ( *( ( volatile uint32_t * ) 0xFEE000B0UL ) )
#define portAPIC_EOI ( *( ( volatile uint32_t * ) 0xFEE000B0UL ) )
/* APIC bit definitions. */
#define portAPIC_ENABLE_BIT ( 1UL << 8UL )
#define portAPIC_TIMER_PERIODIC ( 1UL << 17UL )
#define portAPIC_DISABLE ( 1UL << 16UL )
#define portAPIC_NMI ( 4 << 8 )
#define portAPIC_DIV_16 ( 0x03 )
#define portAPIC_ENABLE_BIT ( 1UL << 8UL )
#define portAPIC_TIMER_PERIODIC ( 1UL << 17UL )
#define portAPIC_DISABLE ( 1UL << 16UL )
#define portAPIC_NMI ( 4 << 8)
#define portAPIC_DIV_16 ( 0x03 )
/* Define local API register addresses. */
#define portAPIC_ID_REGISTER ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x20UL ) ) )
#define portAPIC_SPURIOUS_INT ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0xF0UL ) ) )
#define portAPIC_LVT_TIMER ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x320UL ) ) )
#define portAPIC_TIMER_INITIAL_COUNT ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x380UL ) ) )
#define portAPIC_TIMER_CURRENT_COUNT ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x390UL ) ) )
#define portAPIC_TASK_PRIORITY ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x80UL ) ) )
#define portAPIC_LVT_ERROR ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x370UL ) ) )
#define portAPIC_ERROR_STATUS ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x280UL ) ) )
#define portAPIC_LDR ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0xD0UL ) ) )
#define portAPIC_TMRDIV ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x3E0UL ) ) )
#define portAPIC_LVT_PERF ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x340UL ) ) )
#define portAPIC_LVT_LINT0 ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x350UL ) ) )
#define portAPIC_LVT_LINT1 ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x360UL ) ) )
#define portAPIC_ID_REGISTER ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x20UL ) ) )
#define portAPIC_SPURIOUS_INT ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0xF0UL ) ) )
#define portAPIC_LVT_TIMER ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x320UL ) ) )
#define portAPIC_TIMER_INITIAL_COUNT ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x380UL ) ) )
#define portAPIC_TIMER_CURRENT_COUNT ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x390UL ) ) )
#define portAPIC_TASK_PRIORITY ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x80UL ) ) )
#define portAPIC_LVT_ERROR ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x370UL ) ) )
#define portAPIC_ERROR_STATUS ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x280UL ) ) )
#define portAPIC_LDR ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0xD0UL ) ) )
#define portAPIC_TMRDIV ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x3E0UL ) ) )
#define portAPIC_LVT_PERF ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x340UL ) ) )
#define portAPIC_LVT_LINT0 ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x350UL ) ) )
#define portAPIC_LVT_LINT1 ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0x360UL ) ) )
/* Don't yield if inside a critical section - instead hold the yield pending
* so it is performed when the critical section is exited. */
#define portYIELD() \
{ \
extern volatile uint32_t ulCriticalNesting; \
extern volatile uint32_t ulPortYieldPending; \
if( ulCriticalNesting != 0 ) \
{ \
ulPortYieldPending = pdTRUE; \
} \
else \
{ \
__asm volatile ( portYIELD_INTERRUPT ); \
} \
}
so it is performed when the critical section is exited. */
#define portYIELD() \
{ \
extern volatile uint32_t ulCriticalNesting; \
extern volatile uint32_t ulPortYieldPending; \
if( ulCriticalNesting != 0 ) \
{ \
ulPortYieldPending = pdTRUE; \
} \
else \
{ \
__asm volatile( portYIELD_INTERRUPT ); \
} \
}
/* Called at the end of an ISR that can cause a context switch - pend a yield if
* xSwithcRequired is not false. */
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
{ \
extern volatile uint32_t ulPortYieldPending; \
if( xSwitchRequired != pdFALSE ) \
{ \
ulPortYieldPending = 1; \
} \
}
xSwithcRequired is not false. */
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
{ \
extern volatile uint32_t ulPortYieldPending; \
if( xSwitchRequired != pdFALSE ) \
{ \
ulPortYieldPending = 1; \
} \
}
/* Same as portEND_SWITCHING_ISR() - take your pick which name to use. */
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
/*-----------------------------------------------------------
* Critical section control
*----------------------------------------------------------*/
* Critical section control
*----------------------------------------------------------*/
/* Critical sections for use in interrupts. */
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetInterruptMask()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) vPortClearInterruptMask( x )
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetInterruptMask()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortClearInterruptMask( x )
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern uint32_t ulPortSetInterruptMask( void );
extern void vPortClearInterruptMask( uint32_t ulNewMaskValue );
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
extern uint32_t ulPortSetInterruptMask( void );
extern void vPortClearInterruptMask( uint32_t ulNewMaskValue );
/* These macros do not globally disable/enable interrupts. They do mask off
* interrupts that have a priority below configMAX_API_CALL_INTERRUPT_PRIORITY. */
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
#define portDISABLE_INTERRUPTS() __asm volatile ( "cli" )
#define portENABLE_INTERRUPTS() __asm volatile ( "sti" )
interrupts that have a priority below configMAX_API_CALL_INTERRUPT_PRIORITY. */
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
#define portDISABLE_INTERRUPTS() __asm volatile( "cli" )
#define portENABLE_INTERRUPTS() __asm volatile( "sti" )
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. These are
* not required for this port but included in case common demo code that uses these
* macros is used. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
not required for this port but included in case common demo code that uses these
macros is used. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
/* Architecture specific optimisations. */
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
/* Store/clear the ready priorities in a bit map. */
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) \
__asm volatile ( "bsr %1, %0\n\t" \
: "=r" ( uxTopPriority ) : "rm" ( uxReadyPriorities ) : "cc" )
/* Store/clear the ready priorities in a bit map. */
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) \
__asm volatile( "bsr %1, %0\n\t" \
:"=r"(uxTopPriority) : "rm"(uxReadyPriorities) : "cc" )
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
#define portNOP() __asm volatile ( "NOP" )
#define portNOP() __asm volatile( "NOP" )
/*-----------------------------------------------------------
* Misc
*----------------------------------------------------------*/
* Misc
*----------------------------------------------------------*/
#define portNUM_VECTORS 256
#define portMAX_PRIORITY 15
typedef void ( * ISR_Handler_t ) ( void );
#define portNUM_VECTORS 256
#define portMAX_PRIORITY 15
typedef void ( *ISR_Handler_t ) ( void );
/* Any task that uses the floating point unit MUST call vPortTaskUsesFPU()
* before any floating point instructions are executed. */
#ifndef configSUPPORT_FPU
#define configSUPPORT_FPU 0
#endif
before any floating point instructions are executed. */
#ifndef configSUPPORT_FPU
#define configSUPPORT_FPU 0
#endif
#if configSUPPORT_FPU == 1
void vPortTaskUsesFPU( void );
#define portTASK_USES_FLOATING_POINT() vPortTaskUsesFPU()
#endif
#if configSUPPORT_FPU == 1
void vPortTaskUsesFPU( void );
#define portTASK_USES_FLOATING_POINT() vPortTaskUsesFPU()
#endif
/* See the comments under the configUSE_COMMON_INTERRUPT_ENTRY_POINT definition
* below. */
BaseType_t xPortRegisterCInterruptHandler( ISR_Handler_t pxHandler,
uint32_t ulVectorNumber );
BaseType_t xPortInstallInterruptHandler( ISR_Handler_t pxHandler,
uint32_t ulVectorNumber );
below. */
BaseType_t xPortRegisterCInterruptHandler( ISR_Handler_t pxHandler, uint32_t ulVectorNumber );
BaseType_t xPortInstallInterruptHandler( ISR_Handler_t pxHandler, uint32_t ulVectorNumber );
#ifndef configAPIC_BASE
#ifndef configAPIC_BASE
/* configAPIC_BASE_ADDRESS sets the base address of the local APIC. It can
be overridden in FreeRTOSConfig.h should it not be constant. */
#define configAPIC_BASE 0xFEE00000UL
#endif
/* configAPIC_BASE_ADDRESS sets the base address of the local APIC. It can
* be overridden in FreeRTOSConfig.h should it not be constant. */
#define configAPIC_BASE 0xFEE00000UL
#endif
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
/* The FreeRTOS scheduling algorithm selects the task that will enter the
Running state. configUSE_PORT_OPTIMISED_TASK_SELECTION is used to set how
that is done.
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
If configUSE_PORT_OPTIMISED_TASK_SELECTION is set to 0 then the task to
enter the Running state is selected using a portable algorithm written in
C. This is the slowest method, but the algorithm does not restrict the
maximum number of unique RTOS task priorities that are available.
/* The FreeRTOS scheduling algorithm selects the task that will enter the
* Running state. configUSE_PORT_OPTIMISED_TASK_SELECTION is used to set how
* that is done.
*
* If configUSE_PORT_OPTIMISED_TASK_SELECTION is set to 0 then the task to
* enter the Running state is selected using a portable algorithm written in
* C. This is the slowest method, but the algorithm does not restrict the
* maximum number of unique RTOS task priorities that are available.
*
* If configUSE_PORT_OPTIMISED_TASK_SELECTION is set to 1 then the task to
* enter the Running state is selected using a single assembly instruction.
* This is the fastest method, but restricts the maximum number of unique RTOS
* task priorities to 32 (the same task priority can be assigned to any number
* of RTOS tasks). */
#warning configUSE_PORT_OPTIMISED_TASK_SELECTION was not defined in FreeRTOSConfig.h and has been defaulted to 1
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
If configUSE_PORT_OPTIMISED_TASK_SELECTION is set to 1 then the task to
enter the Running state is selected using a single assembly instruction.
This is the fastest method, but restricts the maximum number of unique RTOS
task priorities to 32 (the same task priority can be assigned to any number
of RTOS tasks). */
#warning configUSE_PORT_OPTIMISED_TASK_SELECTION was not defined in FreeRTOSConfig.h and has been defaulted to 1
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#ifndef configUSE_COMMON_INTERRUPT_ENTRY_POINT
#ifndef configUSE_COMMON_INTERRUPT_ENTRY_POINT
/* There are two ways of implementing interrupt handlers:
/* There are two ways of implementing interrupt handlers:
*
* 1) As standard C functions -
*
* This method can only be used if configUSE_COMMON_INTERRUPT_ENTRY_POINT
* is set to 1. The C function is installed using
* xPortRegisterCInterruptHandler().
*
* This is the simplest of the two methods but incurs a slightly longer
* interrupt entry time.
*
* 2) By using an assembly stub that wraps the handler in the FreeRTOS
* portFREERTOS_INTERRUPT_ENTRY and portFREERTOS_INTERRUPT_EXIT macros.
*
* This method can always be used. It is slightly more complex than
* method 1 but benefits from a faster interrupt entry time. */
#warning configUSE_COMMON_INTERRUPT_ENTRY_POINT was not defined in FreeRTOSConfig.h and has been defaulted to 1.
#define configUSE_COMMON_INTERRUPT_ENTRY_POINT 1
#endif
1) As standard C functions -
#ifndef configISR_STACK_SIZE
This method can only be used if configUSE_COMMON_INTERRUPT_ENTRY_POINT
is set to 1. The C function is installed using
xPortRegisterCInterruptHandler().
/* Interrupt entry code will switch the stack in use to a dedicated system
* stack.
*
* configISR_STACK_SIZE defines the number of 32-bit values that can be stored
* on the system stack, and must be large enough to hold a potentially nested
* interrupt stack frame. */
This is the simplest of the two methods but incurs a slightly longer
interrupt entry time.
#error configISR_STACK_SIZE was not defined in FreeRTOSConfig.h.
#endif
2) By using an assembly stub that wraps the handler in the FreeRTOS
portFREERTOS_INTERRUPT_ENTRY and portFREERTOS_INTERRUPT_EXIT macros.
#ifndef configMAX_API_CALL_INTERRUPT_PRIORITY
This method can always be used. It is slightly more complex than
method 1 but benefits from a faster interrupt entry time. */
#warning configUSE_COMMON_INTERRUPT_ENTRY_POINT was not defined in FreeRTOSConfig.h and has been defaulted to 1.
#define configUSE_COMMON_INTERRUPT_ENTRY_POINT 1
#endif
/* Interrupt safe FreeRTOS functions (those that end in "FromISR" must not
* be called from an interrupt that has a priority above that set by
* configMAX_API_CALL_INTERRUPT_PRIORITY. */
#warning configMAX_API_CALL_INTERRUPT_PRIORITY was not defined in FreeRTOSConfig.h and has been defaulted to 10
#define configMAX_API_CALL_INTERRUPT_PRIORITY 10
#endif
#ifndef configISR_STACK_SIZE
/* Interrupt entry code will switch the stack in use to a dedicated system
stack.
#ifndef configSUPPORT_FPU
#warning configSUPPORT_FPU was not defined in FreeRTOSConfig.h and has been defaulted to 0
#define configSUPPORT_FPU 0
#endif
configISR_STACK_SIZE defines the number of 32-bit values that can be stored
on the system stack, and must be large enough to hold a potentially nested
interrupt stack frame. */
#error configISR_STACK_SIZE was not defined in FreeRTOSConfig.h.
#endif
#ifndef configMAX_API_CALL_INTERRUPT_PRIORITY
/* Interrupt safe FreeRTOS functions (those that end in "FromISR" must not
be called from an interrupt that has a priority above that set by
configMAX_API_CALL_INTERRUPT_PRIORITY. */
#warning configMAX_API_CALL_INTERRUPT_PRIORITY was not defined in FreeRTOSConfig.h and has been defaulted to 10
#define configMAX_API_CALL_INTERRUPT_PRIORITY 10
#endif
#ifndef configSUPPORT_FPU
#warning configSUPPORT_FPU was not defined in FreeRTOSConfig.h and has been defaulted to 0
#define configSUPPORT_FPU 0
#endif
/* The value written to the task priority register to raise the interrupt mask
* to the maximum from which FreeRTOS API calls can be made. */
#define portAPIC_PRIORITY_SHIFT ( 4UL )
#define portAPIC_MAX_SUB_PRIORITY ( 0x0fUL )
#define portMAX_API_CALL_PRIORITY ( ( configMAX_API_CALL_INTERRUPT_PRIORITY << portAPIC_PRIORITY_SHIFT ) | portAPIC_MAX_SUB_PRIORITY )
to the maximum from which FreeRTOS API calls can be made. */
#define portAPIC_PRIORITY_SHIFT ( 4UL )
#define portAPIC_MAX_SUB_PRIORITY ( 0x0fUL )
#define portMAX_API_CALL_PRIORITY ( ( configMAX_API_CALL_INTERRUPT_PRIORITY << portAPIC_PRIORITY_SHIFT ) | portAPIC_MAX_SUB_PRIORITY )
/* Asserts if interrupt safe FreeRTOS functions are called from a priority
* above the max system call interrupt priority. */
#define portAPIC_PROCESSOR_PRIORITY ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0xA0UL ) ) )
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() configASSERT( ( portAPIC_PROCESSOR_PRIORITY ) <= ( portMAX_API_CALL_PRIORITY ) )
above the max system call interrupt priority. */
#define portAPIC_PROCESSOR_PRIORITY ( *( ( volatile uint32_t * ) ( configAPIC_BASE + 0xA0UL ) ) )
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() configASSERT( ( portAPIC_PROCESSOR_PRIORITY ) <= ( portMAX_API_CALL_PRIORITY ) )
#ifdef __cplusplus
} /* extern C */
#endif
#ifdef __cplusplus
} /* extern C */
#endif
#endif /* PORTMACRO_H */

284
portable/GCC/MCF5235/port.c
View file

@ -1,55 +1,55 @@
/*
* FreeRTOS V4.1.1 - Copyright (C) 2003-2006 Richard Barry.
* MCF5235 Port - Copyright (C) 2006 Christian Walter.
*
* This file is part of the FreeRTOS distribution.
*
* FreeRTOS is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License** as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* FreeRTOS is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with FreeRTOS; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* A special exception to the GPL can be applied should you wish to distribute
* a combined work that includes FreeRTOS, without being obliged to provide
* the source code for any proprietary components. See the licensing section
* of http://www.FreeRTOS.org for full details of how and when the exception
* can be applied.
*
***************************************************************************
***************************************************************************
* *
* Get the FreeRTOS eBook! See http://www.FreeRTOS.org/Documentation *
* *
* This is a concise, step by step, 'hands on' guide that describes both *
* general multitasking concepts and FreeRTOS specifics. It presents and *
* explains numerous examples that are written using the FreeRTOS API. *
* Full source code for all the examples is provided in an accompanying *
* .zip file. *
* *
***************************************************************************
***************************************************************************
*
* Please ensure to read the configuration and relevant port sections of the
* online documentation.
*
* http://www.FreeRTOS.org - Documentation, latest information, license and
* contact details.
*
* http://www.SafeRTOS.com - A version that is certified for use in safety
* critical systems.
*
* http://www.OpenRTOS.com - Commercial support, development, porting,
* licensing and training services.
*/
FreeRTOS V4.1.1 - Copyright (C) 2003-2006 Richard Barry.
MCF5235 Port - Copyright (C) 2006 Christian Walter.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License** as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
FreeRTOS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with FreeRTOS; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes FreeRTOS, without being obliged to provide
the source code for any proprietary components. See the licensing section
of http://www.FreeRTOS.org for full details of how and when the exception
can be applied.
***************************************************************************
***************************************************************************
* *
* Get the FreeRTOS eBook! See http://www.FreeRTOS.org/Documentation *
* *
* This is a concise, step by step, 'hands on' guide that describes both *
* general multitasking concepts and FreeRTOS specifics. It presents and *
* explains numerous examples that are written using the FreeRTOS API. *
* Full source code for all the examples is provided in an accompanying *
* .zip file. *
* *
***************************************************************************
***************************************************************************
Please ensure to read the configuration and relevant port sections of the
online documentation.
http://www.FreeRTOS.org - Documentation, latest information, license and
contact details.
http://www.SafeRTOS.com - A version that is certified for use in safety
critical systems.
http://www.OpenRTOS.com - Commercial support, development, porting,
licensing and training services.
*/
#include <stdlib.h>
@ -58,52 +58,52 @@
#include "task.h"
/* ------------------------ Types ----------------------------------------- */
typedef volatile uint32_t vuint32;
typedef volatile uint16_t vuint16;
typedef volatile uint8_t vuint8;
typedef volatile uint32_t vuint32;
typedef volatile uint16_t vuint16;
typedef volatile uint8_t vuint8;
/* ------------------------ Defines --------------------------------------- */
#define portVECTOR_TABLE __RAMVEC
#define portVECTOR_SYSCALL ( 32 + portTRAP_YIELD )
#define portVECTOR_TIMER ( 64 + 36 )
#define portVECTOR_TABLE __RAMVEC
#define portVECTOR_SYSCALL ( 32 + portTRAP_YIELD )
#define portVECTOR_TIMER ( 64 + 36 )
#define MCF_PIT_PRESCALER 512UL
#define MCF_PIT_TIMER_TICKS ( FSYS_2 / MCF_PIT_PRESCALER )
#define MCF_PIT_MODULUS_REGISTER( freq ) ( MCF_PIT_TIMER_TICKS / ( freq ) - 1UL )
#define MCF_PIT_PRESCALER 512UL
#define MCF_PIT_TIMER_TICKS ( FSYS_2 / MCF_PIT_PRESCALER )
#define MCF_PIT_MODULUS_REGISTER(freq) ( MCF_PIT_TIMER_TICKS / ( freq ) - 1UL)
#define MCF_PIT_PMR0 ( *( vuint16 * ) ( void * ) ( &__IPSBAR[ 0x150002 ] ) )
#define MCF_PIT_PCSR0 ( *( vuint16 * ) ( void * ) ( &__IPSBAR[ 0x150000 ] ) )
#define MCF_PIT_PCSR_PRE( x ) ( ( ( x ) & 0x000F ) << 8 )
#define MCF_PIT_PCSR_EN ( 0x0001 )
#define MCF_PIT_PCSR_RLD ( 0x0002 )
#define MCF_PIT_PCSR_PIF ( 0x0004 )
#define MCF_PIT_PCSR_PIE ( 0x0008 )
#define MCF_PIT_PCSR_OVW ( 0x0010 )
#define MCF_INTC0_ICR36 ( *( vuint8 * ) ( void * ) ( &__IPSBAR[ 0x000C64 ] ) )
#define MCF_INTC0_IMRH ( *( vuint32 * ) ( void * ) ( &__IPSBAR[ 0x000C08 ] ) )
#define MCF_INTC0_IMRH_INT_MASK36 ( 0x00000010 )
#define MCF_INTC0_IMRH_MASKALL ( 0x00000001 )
#define MCF_INTC0_ICRn_IP( x ) ( ( ( x ) & 0x07 ) << 0 )
#define MCF_INTC0_ICRn_IL( x ) ( ( ( x ) & 0x07 ) << 3 )
#define MCF_PIT_PMR0 ( *( vuint16 * )( void * )( &__IPSBAR[ 0x150002 ] ) )
#define MCF_PIT_PCSR0 ( *( vuint16 * )( void * )( &__IPSBAR[ 0x150000 ] ) )
#define MCF_PIT_PCSR_PRE(x) ( ( ( x ) & 0x000F ) << 8 )
#define MCF_PIT_PCSR_EN ( 0x0001 )
#define MCF_PIT_PCSR_RLD ( 0x0002 )
#define MCF_PIT_PCSR_PIF ( 0x0004 )
#define MCF_PIT_PCSR_PIE ( 0x0008 )
#define MCF_PIT_PCSR_OVW ( 0x0010 )
#define MCF_INTC0_ICR36 ( *( vuint8 * )( void * )( &__IPSBAR[ 0x000C64 ] ) )
#define MCF_INTC0_IMRH ( *( vuint32 * )( void * )( &__IPSBAR[ 0x000C08 ] ) )
#define MCF_INTC0_IMRH_INT_MASK36 ( 0x00000010 )
#define MCF_INTC0_IMRH_MASKALL ( 0x00000001 )
#define MCF_INTC0_ICRn_IP(x) ( ( ( x ) & 0x07 ) << 0 )
#define MCF_INTC0_ICRn_IL(x) ( ( ( x ) & 0x07 ) << 3 )
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
#define portINITIAL_CRITICAL_NESTING ( ( uint32_t ) 10 )
/* ------------------------ Static variables ------------------------------ */
volatile uint32_t ulCriticalNesting = portINITIAL_CRITICAL_NESTING;
volatile uint32_t ulCriticalNesting = portINITIAL_CRITICAL_NESTING;
/* ------------------------ Static functions ------------------------------ */
#if configUSE_PREEMPTION == 0
static void prvPortPreemptiveTick( void ) __attribute__( ( interrupt_handler ) );
static void prvPortPreemptiveTick ( void ) __attribute__ ((interrupt_handler));
#else
static void prvPortPreemptiveTick( void );
static void prvPortPreemptiveTick ( void );
#endif
/* ------------------------ Start implementation -------------------------- */
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *
pxPortInitialiseStack( StackType_t * pxTopOfStack, TaskFunction_t pxCode,
void *pvParameters )
{
/* Place the parameter on the stack in the expected location. */
*pxTopOfStack = ( StackType_t ) pvParameters;
@ -129,35 +129,35 @@ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
*pxTopOfStack = 0;
*pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xA6; /* A6 / FP */
*pxTopOfStack = ( StackType_t ) 0xA6; /* A6 / FP */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xA5; /* A5 */
*pxTopOfStack = ( StackType_t ) 0xA5; /* A5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xA4; /* A4 */
*pxTopOfStack = ( StackType_t ) 0xA4; /* A4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xA3; /* A3 */
*pxTopOfStack = ( StackType_t ) 0xA3; /* A3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xA2; /* A2 */
*pxTopOfStack = ( StackType_t ) 0xA2; /* A2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xA1; /* A1 */
*pxTopOfStack = ( StackType_t ) 0xA1; /* A1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xA0; /* A0 */
*pxTopOfStack = ( StackType_t ) 0xA0; /* A0 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xD7; /* D7 */
*pxTopOfStack = ( StackType_t ) 0xD7; /* D7 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xD6; /* D6 */
*pxTopOfStack = ( StackType_t ) 0xD6; /* D6 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xD5; /* D5 */
*pxTopOfStack = ( StackType_t ) 0xD5; /* D5 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xD4; /* D4 */
*pxTopOfStack = ( StackType_t ) 0xD4; /* D4 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xD3; /* D3 */
*pxTopOfStack = ( StackType_t ) 0xD3; /* D3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xD2; /* D2 */
*pxTopOfStack = ( StackType_t ) 0xD2; /* D2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xD1; /* D1 */
*pxTopOfStack = ( StackType_t ) 0xD1; /* D1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xD0; /* D0 */
*pxTopOfStack = ( StackType_t ) 0xD0; /* D0 */
return pxTopOfStack;
}
@ -165,64 +165,65 @@ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
/*
* Called by portYIELD() or taskYIELD() to manually force a context switch.
*/
static void prvPortYield( void )
static void
prvPortYield( void )
{
asm volatile ( "move.w #0x2700, %sr\n\t" );
#if _GCC_USES_FP == 1
asm volatile ( "unlk %fp\n\t" );
#endif
/* Perform the context switch. First save the context of the current task. */
portSAVE_CONTEXT();
#if _GCC_USES_FP == 1
asm volatile ( "unlk %fp\n\t" );
#endif
/* Perform the context switch. First save the context of the current task. */
portSAVE_CONTEXT( );
/* Find the highest priority task that is ready to run. */
vTaskSwitchContext();
vTaskSwitchContext( );
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
portRESTORE_CONTEXT( );
}
#if configUSE_PREEMPTION == 0
/*
* The ISR used for the scheduler tick depends on whether the cooperative or
* the preemptive scheduler is being used.
*/
static void prvPortPreemptiveTick( void )
{
/* The cooperative scheduler requires a normal IRQ service routine to
* simply increment the system tick.
*/
static void
prvPortPreemptiveTick ( void )
{
/* The cooperative scheduler requires a normal IRQ service routine to
* simply increment the system tick.
*/
xTaskIncrementTick();
MCF_PIT_PCSR0 |= MCF_PIT_PCSR_PIF;
}
xTaskIncrementTick();
MCF_PIT_PCSR0 |= MCF_PIT_PCSR_PIF;
}
#else /* if configUSE_PREEMPTION == 0 */
#else
static void prvPortPreemptiveTick( void )
{
asm volatile ( "move.w #0x2700, %sr\n\t" );
#if _GCC_USES_FP == 1
asm volatile ( "unlk %fp\n\t" );
#endif
portSAVE_CONTEXT();
MCF_PIT_PCSR0 |= MCF_PIT_PCSR_PIF;
static void
prvPortPreemptiveTick( void )
{
asm volatile ( "move.w #0x2700, %sr\n\t" );
#if _GCC_USES_FP == 1
asm volatile ( "unlk %fp\n\t" );
#endif
portSAVE_CONTEXT( );
MCF_PIT_PCSR0 |= MCF_PIT_PCSR_PIF;
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext( );
}
portRESTORE_CONTEXT( );
}
#endif
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
portRESTORE_CONTEXT();
}
#endif /* if configUSE_PREEMPTION == 0 */
void vPortEnterCritical()
void
vPortEnterCritical()
{
/* FIXME: We should store the old IPL here - How are we supposed to do
* this.
*/
( void ) portSET_IPL( portIPL_MAX );
( void )portSET_IPL( portIPL_MAX );
/* Now interrupts are disabled ulCriticalNesting can be accessed
* directly. Increment ulCriticalNesting to keep a count of how many times
@ -230,7 +231,8 @@ void vPortEnterCritical()
ulCriticalNesting++;
}
void vPortExitCritical()
void
vPortExitCritical()
{
if( ulCriticalNesting > portNO_CRITICAL_NESTING )
{
@ -238,17 +240,18 @@ void vPortExitCritical()
ulCriticalNesting--;
/* If the nesting level has reached zero then interrupts should be
* re-enabled. */
re-enabled. */
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
( void ) portSET_IPL( 0 );
( void )portSET_IPL( 0 );
}
}
}
BaseType_t xPortStartScheduler( void )
BaseType_t
xPortStartScheduler( void )
{
extern void ( * portVECTOR_TABLE[] ) ();
extern void ( *portVECTOR_TABLE[ ] ) ( );
/* Add entry in vector table for yield system call. */
portVECTOR_TABLE[ portVECTOR_SYSCALL ] = prvPortYield;
@ -256,7 +259,7 @@ BaseType_t xPortStartScheduler( void )
portVECTOR_TABLE[ portVECTOR_TIMER ] = prvPortPreemptiveTick;
/* Configure the timer for the system clock. */
if( configTICK_RATE_HZ > 0 )
if ( configTICK_RATE_HZ > 0)
{
/* Configure prescaler */
MCF_PIT_PCSR0 = MCF_PIT_PCSR_PRE( 0x9 ) | MCF_PIT_PCSR_RLD | MCF_PIT_PCSR_OVW;
@ -270,12 +273,13 @@ BaseType_t xPortStartScheduler( void )
}
/* Restore the context of the first task that is going to run. */
portRESTORE_CONTEXT();
portRESTORE_CONTEXT( );
/* Should not get here. */
return pdTRUE;
}
void vPortEndScheduler( void )
void
vPortEndScheduler( void )
{
}

260
portable/GCC/MCF5235/portmacro.h
View file

@ -1,91 +1,91 @@
/*
* FreeRTOS V4.1.1 - Copyright (C) 2003-2006 Richard Barry.
* MCF5235 Port - Copyright (C) 2006 Christian Walter.
*
* This file is part of the FreeRTOS distribution.
*
* FreeRTOS is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License** as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* FreeRTOS is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with FreeRTOS; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* A special exception to the GPL can be applied should you wish to distribute
* a combined work that includes FreeRTOS, without being obliged to provide
* the source code for any proprietary components. See the licensing section
* of http://www.FreeRTOS.org for full details of how and when the exception
* can be applied.
*
***************************************************************************
***************************************************************************
* *
* Get the FreeRTOS eBook! See http://www.FreeRTOS.org/Documentation *
* *
* This is a concise, step by step, 'hands on' guide that describes both *
* general multitasking concepts and FreeRTOS specifics. It presents and *
* explains numerous examples that are written using the FreeRTOS API. *
* Full source code for all the examples is provided in an accompanying *
* .zip file. *
* *
***************************************************************************
***************************************************************************
*
* Please ensure to read the configuration and relevant port sections of the
* online documentation.
*
* http://www.FreeRTOS.org - Documentation, latest information, license and
* contact details.
*
* http://www.SafeRTOS.com - A version that is certified for use in safety
* critical systems.
*
* http://www.OpenRTOS.com - Commercial support, development, porting,
* licensing and training services.
*/
FreeRTOS V4.1.1 - Copyright (C) 2003-2006 Richard Barry.
MCF5235 Port - Copyright (C) 2006 Christian Walter.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License** as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
FreeRTOS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with FreeRTOS; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes FreeRTOS, without being obliged to provide
the source code for any proprietary components. See the licensing section
of http://www.FreeRTOS.org for full details of how and when the exception
can be applied.
***************************************************************************
***************************************************************************
* *
* Get the FreeRTOS eBook! See http://www.FreeRTOS.org/Documentation *
* *
* This is a concise, step by step, 'hands on' guide that describes both *
* general multitasking concepts and FreeRTOS specifics. It presents and *
* explains numerous examples that are written using the FreeRTOS API. *
* Full source code for all the examples is provided in an accompanying *
* .zip file. *
* *
***************************************************************************
***************************************************************************
Please ensure to read the configuration and relevant port sections of the
online documentation.
http://www.FreeRTOS.org - Documentation, latest information, license and
contact details.
http://www.SafeRTOS.com - A version that is certified for use in safety
critical systems.
http://www.OpenRTOS.com - Commercial support, development, porting,
licensing and training services.
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
extern "C" {
#endif
/* ------------------------ Data types for Coldfire ----------------------- */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE unsigned int
#define portBASE_TYPE int
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE unsigned int
#define portBASE_TYPE int
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/* ------------------------ Architecture specifics ------------------------ */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 4
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 4
#define portTRAP_YIELD 0 /* Trap 0 */
#define portIPL_MAX 7 /* Only NMI interrupt 7 allowed. */
#define portTRAP_YIELD 0 /* Trap 0 */
#define portIPL_MAX 7 /* Only NMI interrupt 7 allowed. */
/* ------------------------ FreeRTOS macros for port ---------------------- */
@ -97,17 +97,17 @@
* the stack for the CPU registers and other task dependent values (e.g
* ulCriticalNesting) and updates the top of the stack in the TCB.
*/
#define portSAVE_CONTEXT() \
asm volatile ( /* reserve space for task state. */ \
"lea.l (-64, %sp), %sp\n\t" \
/* push data register %d0-%d7/%a0-%a6 on stack. */ \
"movem.l %d0-%d7/%a0-%a6, (%sp)\n\t" \
/* push ulCriticalNesting counter on stack. */ \
"lea.l (60, %sp), %a0\n\t" \
"move.l ulCriticalNesting, (%a0)\n\t" \
/* set the new top of the stack in the TCB. */ \
"move.l pxCurrentTCB, %a0\n\t" \
"move.l %sp, (%a0)" );
#define portSAVE_CONTEXT() \
asm volatile ( /* reserve space for task state. */ \
"lea.l (-64, %sp), %sp\n\t" \
/* push data register %d0-%d7/%a0-%a6 on stack. */ \
"movem.l %d0-%d7/%a0-%a6, (%sp)\n\t" \
/* push ulCriticalNesting counter on stack. */ \
"lea.l (60, %sp), %a0\n\t" \
"move.l ulCriticalNesting, (%a0)\n\t" \
/* set the new top of the stack in the TCB. */ \
"move.l pxCurrentTCB, %a0\n\t" \
"move.l %sp, (%a0)");
/*.
* This function restores the current active and continues its execution.
@ -115,66 +115,68 @@
* task dependent values (e.g ulCriticalNesting). Finally execution
* is continued by executing an rte instruction.
*/
#define portRESTORE_CONTEXT() \
asm volatile ( "move.l pxCurrentTCB, %sp\n\t" \
"move.l (%sp), %sp\n\t" \
/* stack pointer now points to the saved registers. */ \
"movem.l (%sp), %d0-%d7/%a0-%a6\n\t" \
/* restore ulCriticalNesting counter from stack. */ \
"lea.l (%sp, 60), %sp\n\t" \
"move.l (%sp)+, ulCriticalNesting\n\t" \
/* stack pointer now points to exception frame. */ \
#define portRESTORE_CONTEXT() \
asm volatile ( "move.l pxCurrentTCB, %sp\n\t" \
"move.l (%sp), %sp\n\t" \
/* stack pointer now points to the saved registers. */ \
"movem.l (%sp), %d0-%d7/%a0-%a6\n\t" \
/* restore ulCriticalNesting counter from stack. */ \
"lea.l (%sp, 60), %sp\n\t" \
"move.l (%sp)+, ulCriticalNesting\n\t" \
/* stack pointer now points to exception frame. */ \
"rte\n\t" );
#define portENTER_CRITICAL() \
#define portENTER_CRITICAL() \
vPortEnterCritical();
#define portEXIT_CRITICAL() \
#define portEXIT_CRITICAL() \
vPortExitCritical();
#define portSET_IPL( xIPL ) \
#define portSET_IPL( xIPL ) \
asm_set_ipl( xIPL )
#define portDISABLE_INTERRUPTS() \
do { ( void ) portSET_IPL( portIPL_MAX ); } while( 0 )
#define portENABLE_INTERRUPTS() \
do { ( void ) portSET_IPL( 0 ); } while( 0 )
#define portDISABLE_INTERRUPTS() \
do { ( void )portSET_IPL( portIPL_MAX ); } while( 0 )
#define portENABLE_INTERRUPTS() \
do { ( void )portSET_IPL( 0 ); } while( 0 )
#define portYIELD() \
asm volatile ( " trap %0\n\t" : : "i" ( portTRAP_YIELD ) )
#define portYIELD() \
asm volatile ( " trap %0\n\t" : : "i"(portTRAP_YIELD) )
#define portNOP() \
#define portNOP() \
asm volatile ( "nop\n\t" )
#define portENTER_SWITCHING_ISR() \
asm volatile ( "move.w #0x2700, %sr" ); \
/* Save the context of the interrupted task. */ \
portSAVE_CONTEXT(); \
#define portENTER_SWITCHING_ISR() \
asm volatile ( "move.w #0x2700, %sr" ); \
/* Save the context of the interrupted task. */ \
portSAVE_CONTEXT( ); \
{
#define portEXIT_SWITCHING_ISR( SwitchRequired ) \
/* If a switch is required we call vTaskSwitchContext(). */ \
if( SwitchRequired ) \
{ \
vTaskSwitchContext(); \
} \
} \
portRESTORE_CONTEXT();
#define portEXIT_SWITCHING_ISR( SwitchRequired ) \
/* If a switch is required we call vTaskSwitchContext(). */ \
if( SwitchRequired ) \
{ \
vTaskSwitchContext( ); \
} \
} \
portRESTORE_CONTEXT( );
/* ------------------------ Function prototypes --------------------------- */
void vPortEnterCritical( void );
void vPortExitCritical( void );
int asm_set_ipl( uint32_t int uiNewIPL );
void vPortEnterCritical( void );
void vPortExitCritical( void );
int asm_set_ipl( uint32_t int uiNewIPL );
/* ------------------------ Compiler specifics ---------------------------- */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) \
void vFunction( void * pvParameters )
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) \
void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) \
void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) \
void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */

397
portable/GCC/MSP430F449/port.c
View file

@ -26,10 +26,10 @@
*/
/*
* Changes from V2.5.2
*
+ usCriticalNesting now has a volatile qualifier.
*/
Changes from V2.5.2
+ usCriticalNesting now has a volatile qualifier.
*/
/* Standard includes. */
#include <stdlib.h>
@ -40,62 +40,62 @@
#include "task.h"
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the MSP430 port.
*----------------------------------------------------------*/
* Implementation of functions defined in portable.h for the MSP430 port.
*----------------------------------------------------------*/
/* Constants required for hardware setup. The tick ISR runs off the ACLK,
* not the MCLK. */
#define portACLK_FREQUENCY_HZ ( ( TickType_t ) 32768 )
#define portINITIAL_CRITICAL_NESTING ( ( uint16_t ) 10 )
#define portFLAGS_INT_ENABLED ( ( StackType_t ) 0x08 )
/* Constants required for hardware setup. The tick ISR runs off the ACLK,
not the MCLK. */
#define portACLK_FREQUENCY_HZ ( ( TickType_t ) 32768 )
#define portINITIAL_CRITICAL_NESTING ( ( uint16_t ) 10 )
#define portFLAGS_INT_ENABLED ( ( StackType_t ) 0x08 )
/* We require the address of the pxCurrentTCB variable, but don't want to know
* any details of its type. */
any details of its type. */
typedef void TCB_t;
extern volatile TCB_t * volatile pxCurrentTCB;
/* Most ports implement critical sections by placing the interrupt flags on
* the stack before disabling interrupts. Exiting the critical section is then
* simply a case of popping the flags from the stack. As mspgcc does not use
* a frame pointer this cannot be done as modifying the stack will clobber all
* the stack variables. Instead each task maintains a count of the critical
* section nesting depth. Each time a critical section is entered the count is
* incremented. Each time a critical section is left the count is decremented -
* with interrupts only being re-enabled if the count is zero.
*
* usCriticalNesting will get set to zero when the scheduler starts, but must
* not be initialised to zero as this will cause problems during the startup
* sequence. */
the stack before disabling interrupts. Exiting the critical section is then
simply a case of popping the flags from the stack. As mspgcc does not use
a frame pointer this cannot be done as modifying the stack will clobber all
the stack variables. Instead each task maintains a count of the critical
section nesting depth. Each time a critical section is entered the count is
incremented. Each time a critical section is left the count is decremented -
with interrupts only being re-enabled if the count is zero.
usCriticalNesting will get set to zero when the scheduler starts, but must
not be initialised to zero as this will cause problems during the startup
sequence. */
volatile uint16_t usCriticalNesting = portINITIAL_CRITICAL_NESTING;
/*-----------------------------------------------------------*/
/*
* Macro to save a task context to the task stack. This simply pushes all the
* general purpose msp430 registers onto the stack, followed by the
* usCriticalNesting value used by the task. Finally the resultant stack
* pointer value is saved into the task control block so it can be retrieved
/*
* Macro to save a task context to the task stack. This simply pushes all the
* general purpose msp430 registers onto the stack, followed by the
* usCriticalNesting value used by the task. Finally the resultant stack
* pointer value is saved into the task control block so it can be retrieved
* the next time the task executes.
*/
#define portSAVE_CONTEXT() \
asm volatile ( "push r4 \n\t"\
"push r5 \n\t"\
"push r6 \n\t"\
"push r7 \n\t"\
"push r8 \n\t"\
"push r9 \n\t"\
"push r10 \n\t"\
"push r11 \n\t"\
"push r12 \n\t"\
"push r13 \n\t"\
"push r14 \n\t"\
"push r15 \n\t"\
"mov.w usCriticalNesting, r14 \n\t"\
"push r14 \n\t"\
"mov.w pxCurrentTCB, r12 \n\t"\
"mov.w r1, @r12 \n\t"\
);
#define portSAVE_CONTEXT() \
asm volatile ( "push r4 \n\t" \
"push r5 \n\t" \
"push r6 \n\t" \
"push r7 \n\t" \
"push r8 \n\t" \
"push r9 \n\t" \
"push r10 \n\t" \
"push r11 \n\t" \
"push r12 \n\t" \
"push r13 \n\t" \
"push r14 \n\t" \
"push r15 \n\t" \
"mov.w usCriticalNesting, r14 \n\t" \
"push r14 \n\t" \
"mov.w pxCurrentTCB, r12 \n\t" \
"mov.w r1, @r12 \n\t" \
);
/*
/*
* Macro to restore a task context from the task stack. This is effectively
* the reverse of portSAVE_CONTEXT(). First the stack pointer value is
* loaded from the task control block. Next the value for usCriticalNesting
@ -105,26 +105,26 @@ volatile uint16_t usCriticalNesting = portINITIAL_CRITICAL_NESTING;
* The bic instruction ensures there are no low power bits set in the status
* register that is about to be popped from the stack.
*/
#define portRESTORE_CONTEXT() \
asm volatile ( "mov.w pxCurrentTCB, r12 \n\t"\
"mov.w @r12, r1 \n\t"\
"pop r15 \n\t" \
"mov.w r15, usCriticalNesting \n\t"\
"pop r15 \n\t" \
"pop r14 \n\t" \
"pop r13 \n\t" \
"pop r12 \n\t" \
"pop r11 \n\t" \
"pop r10 \n\t" \
"pop r9 \n\t" \
"pop r8 \n\t" \
"pop r7 \n\t" \
"pop r6 \n\t" \
"pop r5 \n\t" \
"pop r4 \n\t" \
"bic #(0xf0),0(r1) \n\t" \
"reti \n\t"\
);
#define portRESTORE_CONTEXT() \
asm volatile ( "mov.w pxCurrentTCB, r12 \n\t" \
"mov.w @r12, r1 \n\t" \
"pop r15 \n\t" \
"mov.w r15, usCriticalNesting \n\t" \
"pop r15 \n\t" \
"pop r14 \n\t" \
"pop r13 \n\t" \
"pop r12 \n\t" \
"pop r11 \n\t" \
"pop r10 \n\t" \
"pop r9 \n\t" \
"pop r8 \n\t" \
"pop r7 \n\t" \
"pop r6 \n\t" \
"pop r5 \n\t" \
"pop r4 \n\t" \
"bic #(0xf0),0(r1) \n\t" \
"reti \n\t" \
);
/*-----------------------------------------------------------*/
/*
@ -134,194 +134,195 @@ volatile uint16_t usCriticalNesting = portINITIAL_CRITICAL_NESTING;
static void prvSetupTimerInterrupt( void );
/*-----------------------------------------------------------*/
/*
* Initialise the stack of a task to look exactly as if a call to
/*
* Initialise the stack of a task to look exactly as if a call to
* portSAVE_CONTEXT had been called.
*
*
* See the header file portable.h.
*/
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
/*
* Place a few bytes of known values on the bottom of the stack.
* This is just useful for debugging and can be included if required.
*
* pxTopOfStack = ( StackType_t ) 0x1111;
* pxTopOfStack--;
* pxTopOfStack = ( StackType_t ) 0x2222;
* pxTopOfStack--;
* pxTopOfStack = ( StackType_t ) 0x3333;
* pxTopOfStack--;
*/
/*
Place a few bytes of known values on the bottom of the stack.
This is just useful for debugging and can be included if required.
/* The msp430 automatically pushes the PC then SR onto the stack before
* executing an ISR. We want the stack to look just as if this has happened
* so place a pointer to the start of the task on the stack first - followed
* by the flags we want the task to use when it starts up. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
*pxTopOfStack = portFLAGS_INT_ENABLED;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x1111;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x2222;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x3333;
pxTopOfStack--;
*/
/* Next the general purpose registers. */
*pxTopOfStack = ( StackType_t ) 0x4444;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x5555;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x6666;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x7777;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x8888;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x9999;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xaaaa;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xbbbb;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xcccc;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xdddd;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xeeee;
pxTopOfStack--;
/* The msp430 automatically pushes the PC then SR onto the stack before
executing an ISR. We want the stack to look just as if this has happened
so place a pointer to the start of the task on the stack first - followed
by the flags we want the task to use when it starts up. */
*pxTopOfStack = ( StackType_t ) pxCode;
pxTopOfStack--;
*pxTopOfStack = portFLAGS_INT_ENABLED;
pxTopOfStack--;
/* When the task starts is will expect to find the function parameter in
* R15. */
*pxTopOfStack = ( StackType_t ) pvParameters;
pxTopOfStack--;
/* Next the general purpose registers. */
*pxTopOfStack = ( StackType_t ) 0x4444;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x5555;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x6666;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x7777;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x8888;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x9999;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xaaaa;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xbbbb;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xcccc;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xdddd;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0xeeee;
pxTopOfStack--;
/* The code generated by the mspgcc compiler does not maintain separate
* stack and frame pointers. The portENTER_CRITICAL macro cannot therefore
* use the stack as per other ports. Instead a variable is used to keep
* track of the critical section nesting. This variable has to be stored
* as part of the task context and is initially set to zero. */
*pxTopOfStack = ( StackType_t ) portNO_CRITICAL_SECTION_NESTING;
/* When the task starts is will expect to find the function parameter in
R15. */
*pxTopOfStack = ( StackType_t ) pvParameters;
pxTopOfStack--;
/* Return a pointer to the top of the stack we have generated so this can
* be stored in the task control block for the task. */
return pxTopOfStack;
/* The code generated by the mspgcc compiler does not maintain separate
stack and frame pointers. The portENTER_CRITICAL macro cannot therefore
use the stack as per other ports. Instead a variable is used to keep
track of the critical section nesting. This variable has to be stored
as part of the task context and is initially set to zero. */
*pxTopOfStack = ( StackType_t ) portNO_CRITICAL_SECTION_NESTING;
/* Return a pointer to the top of the stack we have generated so this can
be stored in the task control block for the task. */
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* Setup the hardware to generate the tick. Interrupts are disabled when
* this function is called. */
prvSetupTimerInterrupt();
/* Setup the hardware to generate the tick. Interrupts are disabled when
this function is called. */
prvSetupTimerInterrupt();
/* Restore the context of the first task that is going to run. */
portRESTORE_CONTEXT();
/* Restore the context of the first task that is going to run. */
portRESTORE_CONTEXT();
/* Should not get here as the tasks are now running! */
return pdTRUE;
/* Should not get here as the tasks are now running! */
return pdTRUE;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the MSP430 port will get stopped. If required simply
* disable the tick interrupt here. */
/* It is unlikely that the MSP430 port will get stopped. If required simply
disable the tick interrupt here. */
}
/*-----------------------------------------------------------*/
/*
* Manual context switch called by portYIELD or taskYIELD.
* Manual context switch called by portYIELD or taskYIELD.
*
* The first thing we do is save the registers so we can use a naked attribute.
*/
void vPortYield( void ) __attribute__( ( naked ) );
void vPortYield( void ) __attribute__ ( ( naked ) );
void vPortYield( void )
{
/* We want the stack of the task being saved to look exactly as if the task
* was saved during a pre-emptive RTOS tick ISR. Before calling an ISR the
* msp430 places the status register onto the stack. As this is a function
* call and not an ISR we have to do this manually. */
asm volatile ( "push r2");
_DINT();
/* We want the stack of the task being saved to look exactly as if the task
was saved during a pre-emptive RTOS tick ISR. Before calling an ISR the
msp430 places the status register onto the stack. As this is a function
call and not an ISR we have to do this manually. */
asm volatile ( "push r2" );
_DINT();
/* Save the context of the current task. */
portSAVE_CONTEXT();
/* Save the context of the current task. */
portSAVE_CONTEXT();
/* Switch to the highest priority task that is ready to run. */
vTaskSwitchContext();
/* Switch to the highest priority task that is ready to run. */
vTaskSwitchContext();
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
/*-----------------------------------------------------------*/
/*
* Hardware initialisation to generate the RTOS tick. This uses timer 0
* but could alternatively use the watchdog timer or timer 1.
* but could alternatively use the watchdog timer or timer 1.
*/
static void prvSetupTimerInterrupt( void )
{
/* Ensure the timer is stopped. */
TACTL = 0;
/* Ensure the timer is stopped. */
TACTL = 0;
/* Run the timer of the ACLK. */
TACTL = TASSEL_1;
/* Run the timer of the ACLK. */
TACTL = TASSEL_1;
/* Clear everything to start with. */
TACTL |= TACLR;
/* Clear everything to start with. */
TACTL |= TACLR;
/* Set the compare match value according to the tick rate we want. */
TACCR0 = portACLK_FREQUENCY_HZ / configTICK_RATE_HZ;
/* Set the compare match value according to the tick rate we want. */
TACCR0 = portACLK_FREQUENCY_HZ / configTICK_RATE_HZ;
/* Enable the interrupts. */
TACCTL0 = CCIE;
/* Enable the interrupts. */
TACCTL0 = CCIE;
/* Start up clean. */
TACTL |= TACLR;
/* Start up clean. */
TACTL |= TACLR;
/* Up mode. */
TACTL |= MC_1;
/* Up mode. */
TACTL |= MC_1;
}
/*-----------------------------------------------------------*/
/*
/*
* The interrupt service routine used depends on whether the pre-emptive
* scheduler is being used or not.
*/
#if configUSE_PREEMPTION == 1
/*
* Tick ISR for preemptive scheduler. We can use a naked attribute as
* the context is saved at the start of vPortYieldFromTick(). The tick
* count is incremented after the context is saved.
*/
interrupt( TIMERA0_VECTOR ) prvTickISR( void ) __attribute__( ( naked ) );
interrupt( TIMERA0_VECTOR ) prvTickISR( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT();
/*
* Tick ISR for preemptive scheduler. We can use a naked attribute as
* the context is saved at the start of vPortYieldFromTick(). The tick
* count is incremented after the context is saved.
*/
interrupt (TIMERA0_VECTOR) prvTickISR( void ) __attribute__ ( ( naked ) );
interrupt (TIMERA0_VECTOR) prvTickISR( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT();
/* Increment the tick count then switch to the highest priority task
* that is ready to run. */
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
/* Increment the tick count then switch to the highest priority task
that is ready to run. */
if( xTaskIncrementTick() != pdFALSE )
{
vTaskSwitchContext();
}
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
/* Restore the context of the new task. */
portRESTORE_CONTEXT();
}
#else /* if configUSE_PREEMPTION == 1 */
#else
/*
* Tick ISR for the cooperative scheduler. All this does is increment the
* tick count. We don't need to switch context, this can only be done by
* manual calls to taskYIELD();
*/
interrupt( TIMERA0_VECTOR ) prvTickISR( void );
interrupt( TIMERA0_VECTOR ) prvTickISR( void )
{
xTaskIncrementTick();
}
#endif /* if configUSE_PREEMPTION == 1 */
/*
* Tick ISR for the cooperative scheduler. All this does is increment the
* tick count. We don't need to switch context, this can only be done by
* manual calls to taskYIELD();
*/
interrupt (TIMERA0_VECTOR) prvTickISR( void );
interrupt (TIMERA0_VECTOR) prvTickISR( void )
{
xTaskIncrementTick();
}
#endif

Some files were not shown because too many files have changed in this diff Show more