Re-sync with upstream and stripping away none kernel related.

This commit is contained in:
Yuhui Zheng 2020-02-10 13:45:57 -08:00
parent 9c0c37ab9b
commit 210b1ffcc8
13732 changed files with 49 additions and 7054697 deletions

View file

@ -0,0 +1,126 @@
/*
* FreeRTOS Kernel V10.3.0
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/* Variables used by scheduler */
.extern _pxCurrentTCB
.extern _usCriticalNesting
/*
* portSAVE_CONTEXT MACRO
* Saves the context of the general purpose registers, CS and ES (only in far
* memory mode) registers the usCriticalNesting Value and the Stack Pointer
* of the active Task onto the task stack
*/
.macro portSAVE_CONTEXT
SEL RB0
/* Save AX Register to stack. */
PUSH AX
PUSH HL
/* Save CS register. */
MOV A, CS
XCH A, X
/* Save ES register. */
MOV A, ES
PUSH AX
/* Save the remaining general purpose registers from bank 0. */
PUSH DE
PUSH BC
/* Save the other register banks - only necessary in the GCC port. */
SEL RB1
PUSH AX
PUSH BC
PUSH DE
PUSH HL
SEL RB2
PUSH AX
PUSH BC
PUSH DE
PUSH HL
/* Registers in bank 3 are for ISR use only so don't need saving. */
SEL RB0
/* Save the usCriticalNesting value. */
MOVW AX, !_usCriticalNesting
PUSH AX
/* Save the Stack pointer. */
MOVW AX, !_pxCurrentTCB
MOVW HL, AX
MOVW AX, SP
MOVW [HL], AX
/* Switch stack pointers. */
movw sp,#_stack /* Set stack pointer */
.endm
/*
* portRESTORE_CONTEXT MACRO
* Restores the task Stack Pointer then use this to restore usCriticalNesting,
* general purpose registers and the CS and ES (only in far memory mode)
* of the selected task from the task stack
*/
.macro portRESTORE_CONTEXT MACRO
SEL RB0
/* Restore the Stack pointer. */
MOVW AX, !_pxCurrentTCB
MOVW HL, AX
MOVW AX, [HL]
MOVW SP, AX
/* Restore usCriticalNesting value. */
POP AX
MOVW !_usCriticalNesting, AX
/* Restore the alternative register banks - only necessary in the GCC
port. Register bank 3 is dedicated for interrupts use so is not saved or
restored. */
SEL RB2
POP HL
POP DE
POP BC
POP AX
SEL RB1
POP HL
POP DE
POP BC
POP AX
SEL RB0
/* Restore the necessary general purpose registers. */
POP BC
POP DE
/* Restore the ES register. */
POP AX
MOV ES, A
/* Restore the CS register. */
XCH A, X
MOV CS, A
/* Restore general purpose register HL. */
POP HL
/* Restore AX. */
POP AX
.endm

211
portable/GCC/RL78/port.c Normal file
View file

@ -0,0 +1,211 @@
/*
* FreeRTOS Kernel V10.3.0
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
/* The critical nesting value is initialised to a non zero value to ensure
interrupts don't accidentally become enabled before the scheduler is started. */
#define portINITIAL_CRITICAL_NESTING ( ( uint16_t ) 10 )
/* Initial PSW value allocated to a newly created task.
* 11000110
* ||||||||-------------- Fill byte
* |||||||--------------- Carry Flag cleared
* |||||----------------- In-service priority Flags set to low level
* ||||------------------ Register bank Select 0 Flag cleared
* |||------------------- Auxiliary Carry Flag cleared
* ||-------------------- Register bank Select 1 Flag cleared
* |--------------------- Zero Flag set
* ---------------------- Global Interrupt Flag set (enabled)
*/
#define portPSW ( 0xc6UL )
/* Each task maintains a count of the critical section nesting depth. Each time
a critical section is entered the count is incremented. Each time a critical
section is exited the count is decremented - with interrupts only being
re-enabled if the count is zero.
usCriticalNesting will get set to zero when the scheduler starts, but must
not be initialised to zero as that could cause problems during the startup
sequence. */
volatile uint16_t usCriticalNesting = portINITIAL_CRITICAL_NESTING;
/*-----------------------------------------------------------*/
/*
* Sets up the periodic ISR used for the RTOS tick.
*/
__attribute__((weak)) void vApplicationSetupTimerInterrupt( void );
/*
* Starts the scheduler by loading the context of the first task to run.
* (defined in portasm.S).
*/
extern void vPortStartFirstTask( void );
/*-----------------------------------------------------------*/
/*
* Initialise the stack of a task to look exactly as if a call to
* portSAVE_CONTEXT had been called.
*
* See the header file portable.h.
*/
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
uint32_t *pulLocal;
/* Stack type and pointers to the stack type are both 2 bytes. */
/* Parameters are passed in on the stack, and written using a 32bit value
hence a space is left for the second two bytes. */
pxTopOfStack--;
/* Write in the parameter value. */
pulLocal = ( uint32_t * ) pxTopOfStack;
*pulLocal = ( StackType_t ) pvParameters;
pxTopOfStack--;
/* The return address, leaving space for the first two bytes of the
32-bit value. */
pxTopOfStack--;
pulLocal = ( uint32_t * ) pxTopOfStack;
*pulLocal = ( uint32_t ) 0;
pxTopOfStack--;
/* The start address / PSW value is also written in as a 32bit value,
so leave a space for the second two bytes. */
pxTopOfStack--;
/* Task function start address combined with the PSW. */
pulLocal = ( uint32_t * ) pxTopOfStack;
*pulLocal = ( ( ( uint32_t ) pxCode ) | ( portPSW << 24UL ) );
pxTopOfStack--;
/* An initial value for the AX register. */
*pxTopOfStack = ( StackType_t ) 0x1111;
pxTopOfStack--;
/* An initial value for the HL register. */
*pxTopOfStack = ( StackType_t ) 0x2222;
pxTopOfStack--;
/* CS and ES registers. */
*pxTopOfStack = ( StackType_t ) 0x0F00;
pxTopOfStack--;
/* The remaining general purpose registers bank 0 (DE and BC) and the other
two register banks...register bank 3 is dedicated for use by interrupts so
is not saved as part of the task context. */
pxTopOfStack -= 10;
/* Finally the critical section nesting count is set to zero when the task
first starts. */
*pxTopOfStack = ( StackType_t ) portNO_CRITICAL_SECTION_NESTING;
/* Return a pointer to the top of the stack that has beene generated so it
can be stored in the task control block for the task. */
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
portBASE_TYPE xPortStartScheduler( void )
{
/* Setup the hardware to generate the tick. Interrupts are disabled when
this function is called. */
vApplicationSetupTimerInterrupt();
/* Restore the context of the first task that is going to run. */
vPortStartFirstTask();
/* Execution should not reach here as the tasks are now running! */
return pdTRUE;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the RL78 port will get stopped. */
}
/*-----------------------------------------------------------*/
__attribute__((weak)) void vApplicationSetupTimerInterrupt( void )
{
const uint16_t usClockHz = 15000UL; /* Internal clock. */
const uint16_t usCompareMatch = ( usClockHz / configTICK_RATE_HZ ) + 1UL;
/* Use the internal 15K clock. */
OSMC = ( unsigned char ) 0x16;
#ifdef RTCEN
{
/* Supply the interval timer clock. */
RTCEN = ( unsigned char ) 1U;
/* Disable INTIT interrupt. */
ITMK = ( unsigned char ) 1;
/* Disable ITMC operation. */
ITMC = ( unsigned char ) 0x0000;
/* Clear INIT interrupt. */
ITIF = ( unsigned char ) 0;
/* Set interval and enable interrupt operation. */
ITMC = usCompareMatch | 0x8000U;
/* Enable INTIT interrupt. */
ITMK = ( unsigned char ) 0;
}
#endif
#ifdef TMKAEN
{
/* Supply the interval timer clock. */
TMKAEN = ( unsigned char ) 1U;
/* Disable INTIT interrupt. */
TMKAMK = ( unsigned char ) 1;
/* Disable ITMC operation. */
ITMC = ( unsigned char ) 0x0000;
/* Clear INIT interrupt. */
TMKAIF = ( unsigned char ) 0;
/* Set interval and enable interrupt operation. */
ITMC = usCompareMatch | 0x8000U;
/* Enable INTIT interrupt. */
TMKAMK = ( unsigned char ) 0;
}
#endif
}
/*-----------------------------------------------------------*/

View file

@ -0,0 +1,80 @@
/*
* FreeRTOS Kernel V10.3.0
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#include "FreeRTOSConfig.h"
#include "ISR_Support.h"
.global _vPortYield
.global _vPortStartFirstTask
.global _vPortTickISR
.extern _vTaskSwitchContext
.extern _xTaskIncrementTick
.text
.align 2
/* FreeRTOS yield handler. This is installed as the BRK software interrupt
handler. */
_vPortYield:
/* Save the context of the current task. */
portSAVE_CONTEXT
/* Call the scheduler to select the next task. */
call !!_vTaskSwitchContext
/* Restore the context of the next task to run. */
portRESTORE_CONTEXT
retb
/* Starts the scheduler by restoring the context of the task that will execute
first. */
.align 2
_vPortStartFirstTask:
/* Restore the context of whichever task will execute first. */
portRESTORE_CONTEXT
/* An interrupt stack frame is used so the task is started using RETI. */
reti
/* FreeRTOS tick handler. This is installed as the interval timer interrupt
handler. */
.align 2
_vPortTickISR:
/* Save the context of the currently executing task. */
portSAVE_CONTEXT
/* Call the RTOS tick function. */
call !!_xTaskIncrementTick
#if configUSE_PREEMPTION == 1
/* Select the next task to run. */
call !!_vTaskSwitchContext
#endif
/* Retore the context of whichever task will run next. */
portRESTORE_CONTEXT
reti
.end

View file

@ -0,0 +1,121 @@
/*
* FreeRTOS Kernel V10.3.0
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
/*-----------------------------------------------------------
* Port specific definitions.
*
* The settings in this file configure FreeRTOS correctly for the
* given hardware and compiler.
*
* These settings should not be altered.
*-----------------------------------------------------------
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint16_t
#define portBASE_TYPE short
#define portPOINTER_SIZE_TYPE uint16_t
typedef portSTACK_TYPE StackType_t;
typedef short BaseType_t;
typedef unsigned short UBaseType_t;
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Interrupt control macros. */
#define portDISABLE_INTERRUPTS() __asm volatile ( "DI" )
#define portENABLE_INTERRUPTS() __asm volatile ( "EI" )
/*-----------------------------------------------------------*/
/* Critical section control macros. */
#define portNO_CRITICAL_SECTION_NESTING ( ( unsigned short ) 0 )
#define portENTER_CRITICAL() \
{ \
extern volatile uint16_t usCriticalNesting; \
\
portDISABLE_INTERRUPTS(); \
\
/* Now interrupts are disabled ulCriticalNesting can be accessed */ \
/* directly. Increment ulCriticalNesting to keep a count of how many */ \
/* times portENTER_CRITICAL() has been called. */ \
usCriticalNesting++; \
}
#define portEXIT_CRITICAL() \
{ \
extern volatile uint16_t usCriticalNesting; \
\
if( usCriticalNesting > portNO_CRITICAL_SECTION_NESTING ) \
{ \
/* Decrement the nesting count as we are leaving a critical section. */ \
usCriticalNesting--; \
\
/* If the nesting level has reached zero then interrupts should be */ \
/* re-enabled. */ \
if( usCriticalNesting == portNO_CRITICAL_SECTION_NESTING ) \
{ \
portENABLE_INTERRUPTS(); \
} \
} \
}
/*-----------------------------------------------------------*/
/* Task utilities. */
#define portYIELD() __asm volatile ( "BRK" )
#define portYIELD_FROM_ISR( xHigherPriorityTaskWoken ) if( xHigherPriorityTaskWoken ) vTaskSwitchContext()
#define portNOP() __asm volatile ( "NOP" )
/*-----------------------------------------------------------*/
/* Hardwware specifics. */
#define portBYTE_ALIGNMENT 2
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#endif /* PORTMACRO_H */