Moved some files into the include folder that were previously in the root.

Demo/RX200_RX210-RSK_Renesas/RTOSDemo/include/hd44780.h

@@ -0,0 +1,56 @@
+/*-----------------------------------------------------------------------*/
+/* EZ-LCD - Generic control module include/configuration file            */
+/*-----------------------------------------------------------------------*/
+
+#ifndef _EZ_LCD
+#define _EZ_LCD
+
+/*--------------------------------------------------*/
+/* Configuration Options                            */
+/*--------------------------------------------------*/
+
+#define _LCD_ROWS	2		/* Number of Rows (1,2 or 4) */
+#define _LCD_COLS	8 		/* Number of Columns (8..40) */
+
+#define _USE_CURSOR	0		/* 1:Enable lcd_cursor function */
+#define _USE_CGRAM	0		/* 1:Enable lcd_setcg function */
+
+#define	_USE_FUEL	0		/* 1:Enable lcd_put_fuel function (_USE_CGRAM must be 1) */
+
+#define	_USE_BAR	0		/* 1:Enable lcd_put_bar function (_USE_CGRAM must be 1) */
+#define	_MAX_BAR	255		/* Maximum value for lcd_put_bar function */
+
+#define	_USE_POINT	0		/* 1:Enable lcd_put_point function (_USE_CGRAM must be 1) */
+#define	_MAX_POINT	255		/* Maximum value for lcd_put_point function */
+
+#define	_BASE_GRAPH	0		/* Common user character used by lcd_put_bar/lcd_put_point function (2 chars from this) */
+
+
+
+/*--------------------------------------------------*/
+/* API declareations                                */
+/*--------------------------------------------------*/
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+void lcd_init (void);
+void lcd_locate (uint8_t, uint8_t);
+void lcd_putc (uint8_t);
+void lcd_cursor (uint8_t);
+void lcd_setcg (uint8_t, uint8_t, const uint8_t*);
+void lcd_put_fuel (int8_t, uint8_t);
+void lcd_put_bar (uint16_t, uint8_t, uint8_t);
+void lcd_put_point (uint16_t, uint8_t, uint8_t);
+#ifdef __cplusplus
+}
+#endif
+
+#define CSR_OFF		0
+#define CSR_BLOCK	1
+#define CSR_UNDER	2
+
+
+#endif	/* #ifndef _EZLCD */

Demo/RX200_RX210-RSK_Renesas/RTOSDemo/include/lcd.h

@@ -0,0 +1,97 @@
+#ifndef LCD_H
+#define LCD_H
+/***********************************************************************************
+
+FILE NAME		lcd.h
+
+DESCRIPTION		Driver for KS0066u LCD Module Controller (8 characters by 2 lines )
+				on the Renesas RSK boards - header file
+
+Copyright   : 2006 Renesas Technology Europe Ltd.
+Copyright   : 2006 Renesas Technology Corporation.
+All Rights Reserved
+***********************************************************************************/
+
+/***********************************************************************************
+Revision History
+DD.MM.YYYY OSO-UID Description
+26.07.2006 RTE-MBA First Release
+***********************************************************************************/
+void InitialiseDisplay( void );
+void DisplayString(unsigned char position, char * string);
+void LCD_write(unsigned char data_or_ctrl, unsigned char value);
+void LCD_nibble_write(unsigned char data_or_ctrl, unsigned char value);
+void DisplayDelay(unsigned long int units);
+
+
+#define SET_BIT_HIGH	(1)         
+#define SET_BIT_LOW		(0)         
+#define SET_BYTE_HIGH	(0xFF)        
+#define SET_BYTE_LOW	(0x00)      
+
+struct _LCD_Params {
+	unsigned char Line;
+	unsigned short Speed;
+	char *ptr_str;
+};
+
+void prvLCDTaskLine1( void *pvParameters );
+void prvLCDTaskLine2( void *pvParameters );
+
+
+/* RS Register Select pin */
+#define RS_PIN			PORTJ.PODR.BIT.B1
+/* Display Enable pin */  
+#define EN_PIN			PORTJ.PODR.BIT.B3
+/* Data bus port */
+#define DATA_PORT		PORTH.PODR.BYTE
+/* Bit mask from entire port */   
+#define DATA_PORT_MASK	0x0F
+/* Number of bits data needs to shift */
+#define DATA_PORT_SHIFT	0
+
+
+#define DATA_WR 1
+#define CTRL_WR 0
+
+/* Set to ensure base delay of 1microS minimum */
+//#define DELAY_TIMING	0x2F
+#define DELAY_TIMING	50
+/* number of lines on the LCD display */
+#define NUMB_CHARS_PER_LINE 8
+/* Maximum charactors per line of LCD display. */ 
+#define MAXIMUM_LINES	2   
+
+#define LCD_LINE1 0
+#define LCD_LINE2 16
+
+/**********************************************************************************/
+/* LCD commands - use LCD_write function to write these commands to the LCD.	  */
+/**********************************************************************************/
+/* Clear LCD display and home cursor */
+#define LCD_CLEAR		0x01
+/* move cursor to line 1 */
+#define LCD_HOME_L1		0x80
+/* move cursor to line 2 */	  
+#define LCD_HOME_L2		0xC0
+/* Cursor auto decrement after R/W */  
+#define CURSOR_MODE_DEC	0x04
+/* Cursor auto increment after R/W */
+#define CURSOR_MODE_INC	0x06
+/* Setup, 4 bits,2 lines, 5X7 */
+#define FUNCTION_SET	0x28
+/* Display ON with Cursor */
+#define LCD_CURSOR_ON	0x0E
+/* Display ON with Cursor off */
+#define LCD_CURSOR_OFF	0x0C
+/* Display on with blinking cursor */
+#define LCD_CURSOR_BLINK 0x0D
+/*Move Cursor Left One Position */
+#define LCD_CURSOR_LEFT	0x10
+/* Move Cursor Right One Position */
+#define LCD_CURSOR_RIGHT 0x14
+
+#define LCD_DISPLAY_ON	0x04
+#define LCD_TWO_LINE	0x08
+
+#endif