forked from len0rd/rockbox
Fork of rockbox tailored for ipod classic
fdb98c258f
Add lua code to check whether ei/di and ext instructions are supported. This
is unclear since xburst is somewhere between mips32r1 and mips32r2. Details
results are below, but in summary: they don't work (ei has no effect, di/ext
cause illegal instruction exceptions)
> ./hwstub_shell -q -b -e 'require("jz/misc"); JZ.misc.enable_sram()' \
-f lua/xburst.lua -e "XBURST.test_ext_inst(0xb32d0000)"
[...]
Selecting soc jz4760b. Redirecting HW to hwstub.soc.jz4760b
data: d7168acf
error: lua/xburst.lua:209: call failed
trapped exception in call
> ./hwstub_shell -q -b -e 'require("jz/misc"); JZ.misc.enable_sram()' \
-f lua/xburst.lua -e "XBURST.test_ei_di_inst(0xb32d0000)"
[...]
Selecting soc jz4760b. Redirecting HW to hwstub.soc.jz4760b
Testing ei
Test SR
Enable interrupts with CP0
SR: 0x1
Disable interrupts with CP0
SR: 0x0
Test ei/di
Enable interrupts with ei
SR: 0x0
Disable interrupts with di
error: lua/xburst.lua:244: call failed
trapped exception in call
Change-Id: I2e162b5dd5e70488bcd8b58f3ca401a3ecab3c4b
|
||
|---|---|---|
| android | ||
| apps | ||
| backdrops | ||
| bootloader | ||
| debian | ||
| docs | ||
| firmware | ||
| flash | ||
| fonts | ||
| gdb | ||
| icons | ||
| lib | ||
| manual | ||
| packaging | ||
| rbutil | ||
| tools | ||
| uisimulator | ||
| utils | ||
| wps | ||
| .gitattributes | ||
| .gitignore | ||
__________ __ ___.
Open \______ \ ____ ____ | | _\_ |__ _______ ___
Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
\/ \/ \/ \/ \/
Build Your Own Rockbox
1. Clone 'rockbox' from git (or extract a downloaded archive).
$ git clone git://git.rockbox.org/rockbox
or
$ tar xjf rockbox.tar.bz2
2. Create a build directory, preferably in the same directory as the firmware/
and apps/ directories. This is where all generated files will be written.
$ cd rockbox
$ mkdir build
$ cd build
3. Make sure you have sh/arm/m68k-elf-gcc and siblings in the PATH. Make sure
that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
a particular version depending on what player you are compiling for. These
can be acquired with the rockboxdev.sh script in the /tools/ folder of the
source, or will have been included if you've installed one of the
toolchains or development environments provided at http://www.rockbox.org/
$ which sh-elf-gcc
$ which perl
4. In your build directory, run the 'tools/configure' script and enter what
target you want to build for and if you want a debug version or not (and a
few more questions). It'll prompt you. The debug version is for making a
gdb version out of it. It is only useful if you run gdb towards your target
Archos.
$ ../tools/configure
5. *ploink*. Now you have got a Makefile generated for you.
6. Run 'make' and soon the necessary pieces from the firmware and the apps
directories have been compiled, linked and scrambled for you.
$ make
$ make zip
7. unzip the rockbox.zip on your music player, reboot it and
*smile*.
If you want to build for more than one target, just create several build
directories and create a setup for each target:
$ mkdir build-fmrecorder
$ cd build-fmrecorder
$ ../tools/configure
$ mkdir build-player
$ cd build-player
$ ../tools/configure
Questions anyone? Ask on the mailing list. We'll be happy to help you!