| .. |
|
archos/av300
|
Make ATA code not bother to retry requests that return IDNF (specified sector not valid).
|
2010-04-07 20:01:21 +00:00 |
|
as3525
|
Prevent a race condition when writing VIC_INT_EN_CLEAR. Should be very difficult to hit in this case though...
|
2010-06-01 19:29:01 +00:00 |
|
at91sam
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
imx31
|
ARM: use BX when branch to an address in register
|
2010-05-31 15:14:26 +00:00 |
|
ipod
|
Smaller & faster grey blitting on greyscale ipods, based on an idea by Mike Sevakis. ISR speedup on all greyscale iPods except Mini 2nd Gen is ~10%. No speedup on the latter, because the serial transfer is the limiting factor.
|
2010-05-30 22:24:50 +00:00 |
|
iriver
|
YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel.
|
2010-05-15 20:25:56 +00:00 |
|
olympus
|
Port the greylib blitting optimisation to m:robe 100. It's even more efficient on monochrome LCDs - about 20% ISR speedup.
|
2010-05-31 20:13:27 +00:00 |
|
pbell
|
Vibe 500: fix the scrolling through the lists by implementing BUTTON_REPEAT for the scrollstrip.
|
2010-05-24 19:48:06 +00:00 |
|
philips
|
fix YUV Dither for the other targets too, like in r26064.
|
2010-05-24 18:57:11 +00:00 |
|
pnx0101
|
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
|
2010-05-24 16:42:32 +00:00 |
|
s3c2440
|
ARM: use BX when branch to an address in register
|
2010-05-31 15:14:26 +00:00 |
|
s5l8700
|
Update Samsung YP-S3 bootloader demo
|
2010-05-30 21:43:14 +00:00 |
|
samsung
|
fix YUV Dither for the other targets too, like in r26064.
|
2010-05-24 18:57:11 +00:00 |
|
sandisk
|
fix YUV Dither for the other targets too, like in r26064.
|
2010-05-24 18:57:11 +00:00 |
|
tatung
|
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
|
2010-03-08 23:16:57 +00:00 |
|
tcc77x
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
tcc780x
|
Enable IRAM on TCC7801 (Cowon D2) for a 6-12% speedup in codecs that use it, and a small increase in battery life.
|
2010-05-31 21:00:25 +00:00 |
|
tms320dm320
|
Cleanup r26253 red and yellow.
|
2010-05-24 16:57:48 +00:00 |
|
adc-as3514.c
|
adc-as3514.c: cosmetics
|
2010-05-15 19:44:54 +00:00 |
|
adc-pp5020.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
ascodec-pp.c
|
static/const/#include/tab police on various files
|
2009-01-02 21:43:52 +00:00 |
|
ascodec-target.h
|
as3514/as3543 fixes
|
2010-05-17 20:53:25 +00:00 |
|
ata-as-arm.S
|
M:Robe 500 - Enable ASM optimized ATA interface improving disk access speed.
|
2009-11-09 00:38:10 +00:00 |
|
ata-nand-telechips.c
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
|
ata-pp5002.c
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
|
ata-pp5020.c
|
Enable ATA DMA on pp5020 based players with ATA drives.
|
2010-01-31 11:07:29 +00:00 |
|
ata-sd-pp.c
|
ata-sd-pp: reduce size of the buffer used to switch bank, no functional change intended.
|
2010-04-22 08:31:02 +00:00 |
|
ata-target.h
|
Make ATA code not bother to retry requests that return IDNF (specified sector not valid).
|
2010-04-07 20:01:21 +00:00 |
|
audio-pp.c
|
correction on DEFINE, thanks to Kugel who spotted it ;)
|
2009-12-01 18:11:06 +00:00 |
|
crt0-pp-bl.S
|
Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio.
|
2009-12-25 04:05:01 +00:00 |
|
crt0-pp.S
|
ARM: use BX when branch to an address in register
|
2010-05-31 15:14:26 +00:00 |
|
crt0.S
|
as3525: Fix previous commit, IRAM_ORIG can not be represented as an immediate value on targets with 2MB of ram
|
2010-03-17 05:10:41 +00:00 |
|
ffs-arm.S
|
ARM <= v5: Tiny optimisation exploiting the location of the table.
|
2009-12-26 13:22:51 +00:00 |
|
i2c-pp.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
i2c-telechips.c
|
Fix missing i2c mutex initialisation for telechips.
|
2009-06-21 13:26:32 +00:00 |
|
i2s-pp.c
|
Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc.
|
2009-08-01 17:51:00 +00:00 |
|
kernel-pp.c
|
Correct Björn's name in various file headers.
|
2009-03-23 17:08:46 +00:00 |
|
lcd-as-memframe.S
|
YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel.
|
2010-05-15 20:25:56 +00:00 |
|
lcd-c200_c200v2.c
|
Apply FS#9194 - LCD invert for Sansa c200/c200v2
|
2010-05-28 19:36:52 +00:00 |
|
lcd-ssd1815.c
|
Sansa AMS: centralize clock settings in clock-target.h
|
2008-12-04 20:04:31 +00:00 |
|
memcpy-arm.S
|
Remove tabs
|
2010-02-07 17:50:24 +00:00 |
|
memmove-arm.S
|
Remove tabs
|
2010-02-07 17:50:24 +00:00 |
|
memset-arm.S
|
|
|
|
memset16-arm.S
|
|
|
|
mmu-arm.h
|
ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.
|
2009-07-05 01:17:25 +00:00 |
|
mmu-arm.S
|
Update Samsung YP-S3 bootloader demo
|
2010-05-30 21:43:14 +00:00 |
|
mmu-armv6.S
|
mmu-armv6: comment out invalidate_dcache_range()
|
2010-04-13 15:25:11 +00:00 |
|
pcm-pp.c
|
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
|
2010-05-24 16:42:32 +00:00 |
|
pcm-telechips.c
|
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
|
2010-05-24 16:42:32 +00:00 |
|
powermgmt-ascodec.c
|
as3525v2: fix end of charge detection
|
2010-05-19 14:06:08 +00:00 |
|
sd-pp-target.h
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
|
support-arm.S
|
Clarify comments in ARMv6 divider regarding special-case handling of large (high bit set) numerators.
|
2010-02-20 06:29:23 +00:00 |
|
system-arm.c
|
Display Fault status address register on data/prefetch aborts
|
2010-03-09 16:19:50 +00:00 |
|
system-arm.h
|
Change "r" back to "i" (i is for immediate, so no syntax error) and reclaim a bit binsize. Live with that those function don't build with -O0 since they rely on inlining.
|
2009-11-15 22:29:22 +00:00 |
|
system-pp502x.c
|
Packard Bell Vibe 500: reset all allowed devices like in the OF.
|
2010-03-09 19:09:17 +00:00 |
|
system-pp5002.c
|
Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.
|
2009-10-19 21:38:52 +00:00 |
|
system-target.h
|
Move CACHEALIGN_BITS to cpu headers
|
2010-04-13 15:50:08 +00:00 |
|
timer-pp.c
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
usb-drv-arc.c
|
Fix usb-arc driver: the driver would prematurely mark a transfer as complete whereas only a part of it actually is, check the active of the TDs to avoid that. This should fix some HID+UMS bugs.
|
2010-03-25 13:45:19 +00:00 |
|
usb-fw-pp502x.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
usb-fw-pp5002.c
|
|
|
|
usb-s3c6400x.c
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
usb-target.h
|
Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.
|
2009-01-22 22:05:04 +00:00 |
|
usb-tcc.c
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
wmcodec-pp.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
wmcodec-telechips.c
|
D2 also needs audiohw_preinit()
|
2008-11-28 23:44:06 +00:00 |
253cfbcd47