foxbox

History

Michael Sevakis 630b4fc555 i.MX31/Gigabeat S: The nested IRQ code was just totally wrong and not actually working anyway (which is why it wasn't crashing). AVIC doesn't seem truthful about priority of current ISR either :\. Sometimes there were channel swaps during really active DVFS due to FIFO underflow from a needed long delay in the ISR (100us, and IIS TX only has 45us reserve) and DMARQ must be serviced low-latency. Get it doing as was intended. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25822 a1c6a512-1295-4272-9138-f99709370657		2010-05-05 07:15:20 +00:00
..
common	dircache: increase stack size to handle the worse case path during rebuild (dircache->fat->ata-sd-pp+sdhc) and allows directory with depth up to 20 approximately	2010-04-22 08:31:10 +00:00
decompressor
drivers	Use settings for DAC AGC, cpeaker driver bias current (which is unused in rockbox), dither, and headphone bias current taken from c200v2 firmware. These should result in several mA power savings on all as3525, and probably an improvement on AS3525v2 as well as the c200v1 and e200v1. RMAA tests on the e200v1, clipv1 and clipv2 show no measurable difference in output when driving a 16 ohm load.	2010-05-05 04:47:20 +00:00
export	Fuzev2: FM - tested on 2 different models	2010-05-05 04:06:44 +00:00
include	FS#11187 - diacritic.c is in 'drivers' but it does not belong there	2010-04-07 20:41:18 +00:00
target	i.MX31/Gigabeat S: The nested IRQ code was just totally wrong and not actually working anyway (which is why it wasn't crashing). AVIC doesn't seem truthful about priority of current ISR either :\. Sometimes there were channel swaps during really active DVFS due to FIFO underflow from a needed long delay in the ISR (100us, and IIS TX only has 45us reserve) and DMARQ must be serviced low-latency. Get it doing as was intended.	2010-05-05 07:15:20 +00:00
test
usbstack	Enforce the 80-char limit to make everyone happy.	2010-04-13 10:07:02 +00:00
arabjoin.c
arabjoin.h
ata_idle_notify.c
backlight-sw-fading.c
backlight.c
bidi.c
buffer.c
COPYING
debug.c
eeprom_settings.c
enc_base.c
events.c
firmware.make
font.c
font_cache.c
general.c
hangul.c
hotswap.c
ifp_usb_serial.c
kernel.c	Use boolean instead of int for keeping track of mutex signalled state and wakeup signalled state	2010-04-18 15:24:39 +00:00
logf.c
lru.c
mp3_playback.c	Remove lots of simulator-speficic #ifdef'ing in sound.c to allow for DSP effects in the sims, e.g. for bass and treble (targets that do those effects in HW don't simulate using dsp).	2010-04-25 22:54:58 +00:00
panic.c
pcm.c	Remove pcm_mute() which has been unused since r19308	2010-04-27 00:05:02 +00:00
pcm_sampr.c
powermgmt.c
profile.c
README
rolo.c	rolo: make PP code pp6100-compatible	2010-05-03 21:50:48 +00:00
rom.lds
screendump.c
scroll_engine.c
sound.c	Add MPIO HD200 port - changed files	2010-04-26 21:40:00 +00:00
SOURCES	HD200 - remove fm glue code from bootloader build	2010-05-04 11:14:03 +00:00
storage.c
system.c
thread.c	Fix red from r25666 (forgot to use macro to not use core variable on single core), update a comment and remove core check for setting THREAD_SWITCH upon wakeup which is irrelevant to the idea behind the change.	2010-04-18 10:03:25 +00:00
timer.c
tuner.c
usb.c

README

See docs/README