forked from len0rd/rockbox
bad4142ce2
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
225 lines
6.4 KiB
C
225 lines
6.4 KiB
C
#define TARGET_TREE /* this target is using the target tree system */
|
|
/*
|
|
* This config file is for iriver H120 and H140
|
|
*/
|
|
#define IRIVER_H100_SERIES 1
|
|
|
|
#define MODEL_NAME "iriver H120/H140"
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 0
|
|
|
|
/* define this if you use an ATA controller */
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/*define this if the ATA controller and method of USB access support LBA48 */
|
|
#define HAVE_LBA48
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 160
|
|
#define LCD_HEIGHT 128
|
|
#define LCD_DEPTH 2
|
|
|
|
#define LCD_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
/* Display colours, for screenshots and sim (0xRRGGBB) */
|
|
#define LCD_DARKCOLOR 0x000000
|
|
#define LCD_BRIGHTCOLOR 0x5a915a
|
|
#define LCD_BL_DARKCOLOR 0x000000
|
|
#define LCD_BL_BRIGHTCOLOR 0xadd8e6
|
|
|
|
/* remote LCD */
|
|
#define LCD_REMOTE_WIDTH 128
|
|
#define LCD_REMOTE_HEIGHT 64
|
|
#define LCD_REMOTE_DEPTH 1
|
|
|
|
#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
/* Remote display colours, for screenshots and sim (0xRRGGBB) */
|
|
#define LCD_REMOTE_DARKCOLOR 0x000000
|
|
#define LCD_REMOTE_BRIGHTCOLOR 0x5a915a
|
|
#define LCD_REMOTE_BL_DARKCOLOR 0x000000
|
|
#define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa
|
|
|
|
#define CONFIG_KEYPAD IRIVER_H100_PAD
|
|
|
|
#define CONFIG_REMOTE_KEYPAD H100_REMOTE
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this if you have an remote lcd */
|
|
#define HAVE_REMOTE_LCD
|
|
|
|
/* Define if we have a hardware defect that causes ticking on the audio line */
|
|
#define HAVE_REMOTE_LCD_TICKING
|
|
|
|
#define CONFIG_LCD LCD_S1D15E06
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
/* We can fade the backlight by using PWM */
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
#define CONFIG_TUNER TEA5767
|
|
#define CONFIG_TUNER_XTAL 32768
|
|
|
|
#define HAVE_UDA1380
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
#define HAVE_RECORDING_HISTOGRAM
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \
|
|
SRC_CAP_FMRADIO | SRC_CAP_SPDIF)
|
|
|
|
/* define hardware samples rate caps mask */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
#define HAVE_AGC
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* Hardware controlled charging */
|
|
#define CONFIG_CHARGING CHARGING_SIMPLE
|
|
|
|
/* define current usage levels */
|
|
#define CURRENT_NORMAL 80 /* 16h playback on 1300mAh battery */
|
|
#define CURRENT_BACKLIGHT 23 /* from IriverBattery twiki page */
|
|
#define CURRENT_SPDIF_OUT 10 /* optical SPDIF output on */
|
|
#define CURRENT_RECORD 105 /* additional current while recording */
|
|
#define CURRENT_REMOTE 8 /* additional current when remote connected */
|
|
|
|
#ifndef SIMULATOR
|
|
|
|
/* Define this if you have a Motorola SCF5249 */
|
|
#define CONFIG_CPU MCF5249
|
|
|
|
/* Define this if you want to use coldfire's i2c interface */
|
|
#define CONFIG_I2C I2C_COLDFIRE
|
|
|
|
/* Define this if you can run rockbox from flash memory */
|
|
#define HAVE_FLASHED_ROCKBOX
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x200000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 11289600
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
#define HAVE_ATA_LED_CTRL
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
#define BOOTFILE_EXT "iriver"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define BOOTLOADER_ENTRYPOINT 0x001F0000
|
|
#define FLASH_RAMIMAGE_ENTRY 0x00001000
|
|
#define FLASH_ROMIMAGE_ENTRY 0x00100000
|
|
#define FLASH_MAGIC 0xfbfbfbf2
|
|
|
|
/* Define this if there is an EEPROM chip */
|
|
#define HAVE_EEPROM
|
|
|
|
/* Define this if the EEPROM chip is used */
|
|
#define HAVE_EEPROM_SETTINGS
|
|
|
|
#endif /* !SIMULATOR */
|
|
|
|
/* Define this for S/PDIF output available */
|
|
#define HAVE_SPDIF_OUT
|
|
|
|
/* Define this if you can control the S/PDIF power */
|
|
#define HAVE_SPDIF_POWER
|
|
|
|
/* Define this if you have a serial port */
|
|
/*#define HAVE_SERIAL*/
|
|
|
|
/** Port-specific settings **/
|
|
|
|
#define HAVE_LCD_CONTRAST
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_CONTRAST_SETTING 14 /* White screen a bit higher than this */
|
|
#define MAX_CONTRAST_SETTING 63 /* Black screen a bit lower than this */
|
|
#define DEFAULT_CONTRAST_SETTING 27
|
|
|
|
/* Remote LCD contrast range and defaults */
|
|
#define MIN_REMOTE_CONTRAST_SETTING 5
|
|
#define MAX_REMOTE_CONTRAST_SETTING 63
|
|
#define DEFAULT_REMOTE_CONTRAST_SETTING 42
|
|
|
|
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|