forked from len0rd/rockbox
3e7a09cb0d
What works:
- LCD: 16-bit RGB565
- all buttons, including scrollwheel
- SD Card
- Battery level and charging/not charging status
- USB
- audio
- sample rate switching
- HP / LO detect, with "safe" fixed LO volume -
LO volume will only be put to user-defined max volume
if headphones are not present.
- rtc
- Plugins build, tried a couple and they seem OK
- Bootloader, installable to nand via usbboot
What doesn't work:
- Dual Boot
- power on/off has intermittent, low volume audio click
(sometimes it's completely silent, sometimes there's
a click)
- Audio uses 16-bit volume scaling, so clicking/popping
is pretty bad at lower volumes - need 32 bit volume
scaling, 24 bit I2S data
- USB HID keys not yet defined
- no jztool support
Unknowns:
- Stereo Switch pins: Direction select, AC_DC
(probably not even hooked up)
- What is the actual purpose of the Stereo Swtich?
- How does the bluetooth module connect?
"Someday" stuff:
- get LCD working at higher bit depth
- Bluetooth
Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33
|
||
|---|---|---|
| .. | ||
| erosqnative | ||
| fiiom3k | ||
| shanlingq1 | ||
| x1000 | ||
| aic-x1000.c | ||
| aic-x1000.h | ||
| app.lds | ||
| boot-x1000.h | ||
| boot.lds | ||
| clk-x1000.c | ||
| clk-x1000.h | ||
| crt0.S | ||
| debug-x1000.c | ||
| dma-x1000.c | ||
| dma-x1000.h | ||
| gpio-x1000.c | ||
| gpio-x1000.h | ||
| i2c-x1000.c | ||
| i2c-x1000.h | ||
| installer-x1000.c | ||
| installer-x1000.h | ||
| irq-x1000.h | ||
| kernel-x1000.c | ||
| lcd-x1000.c | ||
| lcd-x1000.h | ||
| msc-x1000.c | ||
| msc-x1000.h | ||
| nand-x1000.c | ||
| nand-x1000.h | ||
| pcm-x1000.c | ||
| pwm-x1000.c | ||
| pwm-x1000.h | ||
| sd-x1000.c | ||
| sfc-x1000.c | ||
| sfc-x1000.h | ||
| spl-start.S | ||
| spl-x1000.c | ||
| spl-x1000.h | ||
| spl.lds | ||
| system-target.h | ||
| system-x1000.c | ||
| timer-x1000.c | ||
| usb-x1000.c | ||
| x1000boot.make | ||