foxbox

History

Thomas Martitz 740901f165 Backport strnatcmp changes between r20340 and r20343 git-svn-id: svn://svn.rockbox.org/rockbox/branches/v3_2@20345 a1c6a512-1295-4272-9138-f99709370657		2009-03-17 20:27:58 +00:00
..
common	Backport strnatcmp changes between r20340 and r20343	2009-03-17 20:27:58 +00:00
decompressor
drivers	Commit the common portion of FS#9708: ATA (IDE) DMA by Boris Gjenero with a couple cosmetic tweaks and without the inclusion of 'FS#9721: No error check after writes in ata.c'changes (which can be done separately). No code is changed for targets without HAVE_ATA_DMA defined other than to not display DMA modes in the View Disk Info debug screen if not using DMA (Gigabeat F/X/S were). No target uses the code yet but Gigabeat S use will follow shortly.	2009-03-12 02:01:25 +00:00
export	revert r20105 (rockbox USB stack for portalplayer) for the release. There are still too many issues to be worked out for it to be considered stable	2009-03-17 17:53:09 +00:00
include	Commit FS#8314. This adds strnat[case]cmp written by Martin Pool, which respects numbers within strings, and gives a more intuitive	2009-03-01 17:55:59 +00:00
target	SansaAMS: Add a comment to clarifing a bit that the dcache is inactive without mmu; Show the cp15 control register in the "View I/O Pots menu".	2009-03-14 17:17:27 +00:00
test	Cosmetic fix: remove duplicate semicolons	2009-03-04 18:15:06 +00:00
usbstack	Don't swamp the system with broadcast messages that nobody is listening to yet anyway.	2009-03-11 20:54:32 +00:00
arabjoin.c
arabjoin.h
ata_idle_notify.c
backlight-sw-fading.c	Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S	2009-01-26 23:21:49 +00:00
backlight.c	Add a rockbox kernel thread for simulator specific tasks, and use that for calling the screendump function(s). Fixes screendump in simulators for backlight-less targets (Ondio), and reduces mixing of unrelated functionality a bit (screendump was called from backlight thread, triggered by a sim-only system wide event).	2009-02-20 17:13:08 +00:00
bidi.c
buffer.c
COPYING
debug.c
eeprom_settings.c
enc_base.c
events.c
firmware.make	Silence warning from 'ar' if the archive had to be created.	2009-03-01 09:04:15 +00:00
font.c
font_cache.c
general.c	Move screendump from apps to firmware, solving two nasty firmware-to-apps calls. This required to move the filename creation functions as well. * Fix bug in the BMP header of Clip screendumps. * Add remote screendump for targets with an LCD remote. * Simplify some ifdefs and rename a macro in the sim.	2009-02-10 23:43:37 +00:00
hangul.c
hotswap.c
ifp_usb_serial.c
kernel.c	Remove struct spinlock to cleanup some mess and simplify. It's only used in boosting for multiprocesors and a pure two-corelock heirarchy will do just fine.	2009-02-03 12:16:45 +00:00
logf.c	Commit FS#9970 by Yoshihisa Uchida: fix building when HAVE_SERIAL & ROCKBOX_HAS_LOGF is defined in a simulator build	2009-03-11 16:42:25 +00:00
lru.c
mp3_playback.c
panic.c	Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.	2009-01-08 10:15:32 +00:00
pcm.c	Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.	2009-02-08 22:32:41 +00:00
pcm_sampr.c
powermgmt.c	c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior).	2009-01-11 10:07:22 +00:00
profile.c
README
rolo.c	Ingenic Jz4740:	2009-02-26 21:15:40 +00:00
rom.lds
screendump.c	Forgot to add the new screendump source files.	2009-02-10 23:47:24 +00:00
scroll_engine.c
sound.c	Get the volume controls working on the M:Robe 500 along with some minor code changes.	2009-03-03 18:05:22 +00:00
SOURCES	Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.	2009-03-12 06:31:40 +00:00
system.c	A few tweaks to get USB support compiling again on TCC targets (part of FS#9917 by Michaël Burtin).	2009-03-09 22:02:30 +00:00
thread.c	s3c2440 can use the generic ARM WFI which is much simpler. If there's any advantage to setting the IDLE bit for power consumption, it's possible to combine its use with the old core_sleep instead of using the loop waiting for idle to kick in. For now, go basic. Let GCC choose the register for MCR instead of forcing it to r0.	2009-02-11 19:28:02 +00:00
timer.c	Gigabeat S: Get timer API working. metronome will work now.	2009-01-05 00:00:29 +00:00
tuner.c	Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.	2008-12-27 19:18:50 +00:00
usb.c	Leave "usb mode" when all LUNs are ejected again	2009-02-28 15:16:54 +00:00

README

See docs/README