forked from len0rd/rockbox
2d89143962
I noticed a few mistakes in the old driver code and it was in need of an overhaul anyway... I decided to scale things back, simplify the code and remove most of the debug menus, netting a nice code size savings. One new feature is an advanced debug menu which is accessible by recompiling the code with AXP_EXTRA_DEBUG. It adds quite a bit of code size and isn't useful other than for development so it must be manually enabled by editing the source. Change-Id: I30e17c1194c14823decd726a574ed14451d4cb2d
131 lines
4.3 KiB
C
131 lines
4.3 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2021 Aidan MacDonald
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __AXP192_H__
|
|
#define __AXP192_H__
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
enum {
|
|
#define DEFREG(regname, addr) AXP_REG_##regname = addr,
|
|
#include "axp192-defs.h"
|
|
};
|
|
|
|
enum {
|
|
#define DEFFLD(regname, fldname, msb, lsb, ...) \
|
|
BM_AXP_##regname##_##fldname = ((1 << ((msb) - (lsb) + 1)) - 1) << lsb, \
|
|
BP_AXP_##regname##_##fldname = lsb,
|
|
#include "axp192-defs.h"
|
|
};
|
|
|
|
enum {
|
|
AXP_SUPPLY_EXTEN,
|
|
AXP_SUPPLY_DCDC1,
|
|
AXP_SUPPLY_DCDC2,
|
|
AXP_SUPPLY_DCDC3,
|
|
AXP_SUPPLY_LDO2,
|
|
AXP_SUPPLY_LDO3,
|
|
AXP_SUPPLY_LDOIO0,
|
|
AXP_NUM_SUPPLIES,
|
|
};
|
|
|
|
enum {
|
|
AXP_ADC_ACIN_VOLTAGE,
|
|
AXP_ADC_ACIN_CURRENT,
|
|
AXP_ADC_VBUS_VOLTAGE,
|
|
AXP_ADC_VBUS_CURRENT,
|
|
AXP_ADC_INTERNAL_TEMP,
|
|
AXP_ADC_TS_INPUT,
|
|
AXP_ADC_GPIO0,
|
|
AXP_ADC_GPIO1,
|
|
AXP_ADC_GPIO2,
|
|
AXP_ADC_GPIO3,
|
|
AXP_ADC_BATTERY_VOLTAGE,
|
|
AXP_ADC_CHARGE_CURRENT,
|
|
AXP_ADC_DISCHARGE_CURRENT,
|
|
AXP_ADC_APS_VOLTAGE,
|
|
AXP_NUM_ADCS,
|
|
};
|
|
|
|
enum {
|
|
AXP_GPIO_OPEN_DRAIN_OUTPUT = 0x0,
|
|
AXP_GPIO_INPUT = 0x1,
|
|
AXP_GPIO_SPECIAL = 0x2,
|
|
AXP_GPIO_ADC_IN = 0x4,
|
|
AXP_GPIO_LOW_OUTPUT = 0x5,
|
|
AXP_GPIO_FLOATING = 0x7,
|
|
};
|
|
|
|
enum {
|
|
/* Limit USB current consumption to 100 mA. */
|
|
AXP_VBUS_LIMIT_100mA = (1 << BP_AXP_VBUSIPSOUT_VHOLD_LIM) |
|
|
(1 << BP_AXP_VBUSIPSOUT_VBUS_LIM) |
|
|
(1 << BP_AXP_VBUSIPSOUT_LIM_100mA),
|
|
|
|
/* Limit USB current consumption to 500 mA. */
|
|
AXP_VBUS_LIMIT_500mA = (1 << BP_AXP_VBUSIPSOUT_VHOLD_LIM) |
|
|
(1 << BP_AXP_VBUSIPSOUT_VBUS_LIM) |
|
|
(0 << BP_AXP_VBUSIPSOUT_LIM_100mA),
|
|
|
|
/* No upper bound on USB current, but the current will still
|
|
* be reduced to maintain the bus voltage above V_hold. */
|
|
AXP_VBUS_UNLIMITED = (1 << BP_AXP_VBUSIPSOUT_VHOLD_LIM) |
|
|
(0 << BP_AXP_VBUSIPSOUT_VBUS_LIM) |
|
|
(0 << BP_AXP_VBUSIPSOUT_LIM_100mA),
|
|
|
|
/* Unlimited USB current consumption. Voltage is allowed to drop
|
|
* below V_hold, which may interfere with normal USB operation.
|
|
* This mode is really only useful with AC charging adapters. */
|
|
AXP_VBUS_FULLY_UNLIMITED = (0 << BP_AXP_VBUSIPSOUT_VHOLD_LIM) |
|
|
(0 << BP_AXP_VBUSIPSOUT_VBUS_LIM) |
|
|
(0 << BP_AXP_VBUSIPSOUT_LIM_100mA),
|
|
};
|
|
|
|
extern int axp_read(uint8_t reg);
|
|
extern int axp_write(uint8_t reg, uint8_t value);
|
|
extern int axp_modify(uint8_t reg, uint8_t clr, uint8_t set);
|
|
|
|
extern void axp_enable_supply(int supply, bool enable);
|
|
extern void axp_set_enabled_supplies(unsigned int supply_mask);
|
|
extern void axp_set_supply_voltage(int supply, int output_mV);
|
|
|
|
extern void axp_enable_adc(int adc, bool enable);
|
|
extern void axp_set_enabled_adcs(unsigned int adc_mask);
|
|
extern int axp_read_adc_raw(int adc);
|
|
extern int axp_conv_adc(int adc, int value);
|
|
extern int axp_read_adc(int adc);
|
|
|
|
extern void axp_set_gpio_function(int gpio, int function);
|
|
extern void axp_set_gpio_pulldown(int gpio, bool enable);
|
|
extern int axp_get_gpio(int gpio);
|
|
extern void axp_set_gpio(int gpio, bool enable);
|
|
|
|
extern void axp_set_charge_current(int current_mA);
|
|
extern int axp_get_charge_current(void);
|
|
extern void axp_set_vbus_limit(int vbus_limit);
|
|
extern void axp_set_vhold_level(int vhold_mV);
|
|
extern bool axp_is_charging(void);
|
|
extern unsigned int axp_power_input_status(void);
|
|
|
|
extern void axp_power_off(void);
|
|
|
|
#endif /* __AXP192_H__ */
|