forked from len0rd/rockbox
19a636ddeb
Both rbutil and manual need to have entries for V2.2. Change-Id: If1714456792820e119babe5176f405e273e764b5
70 lines
3.1 KiB
TeX
70 lines
3.1 KiB
TeX
We will install the bootloader with the original firmware's recovery
|
|
mode. The process is summed up as the following:
|
|
|
|
\begin{itemize}
|
|
\item Determine what hardware version your player is and download
|
|
the correct bootloader update file
|
|
\item Place the bootloader \fname{update.upt} file on the SD card
|
|
\item In the original firmware, run the Firmware Update: \\
|
|
\fname{System Settings --> Firmware Update}
|
|
\end{itemize}
|
|
|
|
\subsubsection{Determine hardware version}\label{ref:determine_hardware_version}
|
|
Determine what hardware version your player is. Go to \fname{System Settings --> About The Player --> Version} and reference
|
|
the list below. hw1, hw1.5, and hw2 players all use the same update
|
|
file (with one exception), while hw3 players use a different one.
|
|
|
|
\note{Important: If your player's version is not contained in this list,
|
|
for example if the firmware version is newer than what is listed here,
|
|
we cannot be sure that the hardware is the same. The best thing to do is
|
|
contact the manufacturer and ask them two things: (1) for an update file
|
|
of your version, and (2) if a player with the most recent version listed
|
|
here can be upgraded to the firmware version on your player. If they say
|
|
yes, we can be more certain that the hardware has not changed. These lists
|
|
may not be the most up to date, please see the wiki page at
|
|
\url{https://www.rockbox.org/wiki/AIGOErosQK} for the most up-to-date list.}
|
|
|
|
\begin{description}
|
|
\item[hw1/hw1.5/hw2 players]
|
|
\begin{itemize}
|
|
\item Aigo Eros Q V1.8 - V2.0
|
|
\item Hifiwalker H2 V1.1 - V1.6
|
|
\item Surfans F20 V2.2 - V2.7
|
|
\end{itemize}
|
|
These players use \fname{erosqnative-hw1hw2-erosq.upt} as the update file.
|
|
The lone exception is the Hifiwalker H2 V1.3, which uses the update file
|
|
\fname{erosqnative-hw1hw2-eros\_h2.upt}.
|
|
\item[hw3 players]
|
|
\begin{itemize}
|
|
\item Aigo Eros Q V2.1
|
|
\item Hifiwalker H2 V1.7 - V1.8
|
|
\item Surfans F20 V3.0 - V3.3
|
|
\end{itemize}
|
|
These players use \fname{erosqnative-hw3-erosq.upt} as the update file.
|
|
\item[hw4 players]
|
|
\begin{itemize}
|
|
\item Aigo Eros Q V2.2
|
|
\item Hifiwalker H2 V1.9 - V2.0
|
|
\item Surfans F20 V3.4
|
|
\end{itemize}
|
|
These players use \fname{erosqnative-hw4-erosq_2024.upt} as the update file.
|
|
\end{description}
|
|
|
|
Download the \fname{.upt} file for these players from \download{bootloader/aigo/native/}.
|
|
|
|
\note{All players use the same Rockbox build, only the bootloader is different.}
|
|
|
|
\subsubsection{Place update file on SD card}\label{ref:place_on_sd_card}
|
|
Place the appropriate bootloader file on the root of the SD card and name it
|
|
\emph{exactly} \fname{update.upt}.
|
|
|
|
\note{This is a good time to ensure that your Rockbox installation \fname{.rockbox}
|
|
is present on your SD card.}
|
|
|
|
Don't forget to safely eject/unmount your player.
|
|
|
|
\subsubsection{Run Firmware Update}\label{ref:run_firmware_update}
|
|
In the original firmware, run the firmware updater by going to
|
|
\fname{System Settings --> Firmware Update}. At this point, you can delete
|
|
\fname{update.upt} from the SD card if you wish. \emph{Do not delete .rockbox,
|
|
this is your Rockbox installation and needs to stay there!}
|