forked from len0rd/rockbox
563da70139
ipod6g was configured with SECTOR_SIZE of 4096, but this ATA driver unconditionally translated these to 512B operations on the actual storage device. Rockbox's storage layer already has robust support for "logical sectors larger than physical storage sectors" through use of MAX_LOG_SECTOR_SIZE. So switch to that mechanism, allowing the ipod6g ATA driver to be simplified. If we want to support drives with physical sector sizes > 512B, then we need to port the MAX_PHYS_SECTOR_SIZE logic from the primary ATA driver. Additional changes: * Simplify MWDMA/UDMA selection logic * Report CE-ATA mode in debug menu * Use LBA48 commands only if drive is over 128GiB. * Drop default sleep/poweroff time from 20s to 7s (matching main ATA driver) Finally, the bulk of the changes are the first phase of a badly needed style cleanup that made reading this driver a lot harder than it should be. I intend to split this into a separate patch. Change-Id: I2feca9fd319c8d6cfb3c2610208970428d2fa947
185 lines
5 KiB
C
185 lines
5 KiB
C
/*
|
|
* This config file is for Packard Bell Vibe 500
|
|
*/
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 67
|
|
|
|
#define MODEL_NAME "Packard Bell Vibe 500"
|
|
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/*define this if the ATA controller and method of USB access support LBA48 */
|
|
#define HAVE_LBA48
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS (/*SAMPR_CAP_88 |*/ SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS (/*SAMPR_CAP_88 |*/ SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can ivert the colours on your LCD */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 160
|
|
#define LCD_HEIGHT 128
|
|
/* sqrt(160^2 + 128^2) / 1.8 = 113.8 */
|
|
#define LCD_DPI 114
|
|
#define LCD_DEPTH 16 /* 65536 colors */
|
|
#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 */
|
|
|
|
#ifndef BOOTLOADER
|
|
/* Define this if your LCD can be enabled/disabled */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
|
should be defined as well. */
|
|
#define HAVE_LCD_SLEEP
|
|
#define HAVE_LCD_SLEEP_SETTING
|
|
#endif
|
|
|
|
#define CONFIG_KEYPAD PBELL_VIBE500_PAD
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
|
|
|
|
|
|
/* define this if you have a real-time clock */
|
|
/* Philips 8563T - E8564 is a clone of it */
|
|
#define CONFIG_RTC RTC_E8564
|
|
#define HAVE_RTC_ALARM
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* Define the type of audio codec */
|
|
#define HAVE_WM8731
|
|
|
|
/* WM8731 has no tone controls, so we use the software ones */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 16
|
|
#define DEFAULT_BRIGHTNESS_SETTING 10
|
|
|
|
/* define this if you have a light associated with the buttons */
|
|
#define HAVE_BUTTON_LIGHT
|
|
#define HAVE_BUTTONLIGHT_BRIGHTNESS /* for compatibility */
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1000 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 1500 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Hardware controlled charging, software can monitor plug and charge state */
|
|
#define CONFIG_CHARGING CHARGING_SIMPLE
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* Define this if you have a PortalPlayer PP5020 */
|
|
#define CONFIG_CPU PP5020
|
|
|
|
/* Define this if you want to use the PP5022 i2c interface */
|
|
#define CONFIG_I2C I2C_PP5020
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The start address index for ROM builds */
|
|
#define ROM_START 0x00000000
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x80000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 75000000
|
|
|
|
#define CONFIG_LCD LCD_VIBE500
|
|
|
|
/* Define this if your LCD can set contrast */
|
|
#define HAVE_LCD_CONTRAST
|
|
#define MIN_CONTRAST_SETTING 0
|
|
#define MAX_CONTRAST_SETTING 16
|
|
#define DEFAULT_CONTRAST_SETTING 10 /* OF */
|
|
|
|
/* We're able to shut off power to the HDD */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ARC
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x0409
|
|
#define USB_PRODUCT_ID 0x8038
|
|
#define HAVE_USB_HID_MOUSE
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
#define MI4_FORMAT
|
|
#define BOOTFILE_EXT "mi4"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#ifndef BOOTLOADER
|
|
#define HAVE_ATA_DMA
|
|
#endif
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|