devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity
Fork of rockbox tailored for ipod classic
22289 commits 1 branch 143 tags 210 MiB
Find a file
Jack Halpin 7331bd5381 AMS Sansa: Remove BUSWIDTH and BLOCKLEN commands and revise strategy for High Speed SD Card. 
We are unable to successfully put the pl180 controller into 4 bit mode so we should not put the cards into widebus mode for now.
The blocklength is hardcoded to 512 in sd.c and BLOCKLEN defaults to 512 so this command is not needed.
It appears the internal SD card is not HS capable but sending it the HS switch command does not seem to hinder it's init process.
Assume all SD_V2 cards are HS capable and send them the HS switch command.
If View disk info shows 50.0 MBit/s the card has HS timings.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23137 a1c6a512-1295-4272-9138-f99709370657
2009-10-12 18:55:10 +00:00
apps fix yellow 2009-10-12 18:47:33 +00:00
backdrops Add CabbieV2 for Onda VX747 2009-03-24 22:05:28 +00:00
bootloader Nano2G: Initial (non-working) attempt to load an encrypted copy of the original firmware from the "osbk" image in the firmware partition. Code based on iloader. 2009-10-12 00:57:07 +00:00
docs add Seth Opgenorth to docs/CREDITS 2009-10-09 03:01:16 +00:00
firmware AMS Sansa: Remove BUSWIDTH and BLOCKLEN commands and revise strategy for High Speed SD Card. 2009-10-12 18:55:10 +00:00
flash Simplify powermgmt thread loops so it calls functions turn (no more power_thread_sleep). Do other target-friendly simplifications, generic battery switch handling and split sim-specific code. Whoever can, please verify charging on the Archos Recorder (due to change in the charger duty cycle code). 2008-12-24 16:58:41 +00:00
fonts Forgot emdash and endash for 19-Nimbus 2009-05-19 22:03:16 +00:00
gdb Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
icons kill the release script and build tarball from *everything* in SVN... 2008-03-26 13:12:07 +00:00
manual New plugin theme_remove which offers a way to remove specified theme. 2009-10-12 13:55:59 +00:00
rbutil mkamsboot: allow the version string to be overridden from the commandline - e.g. "make APPVERSION=v1.1 mkamsboot". 2009-10-11 09:47:15 +00:00
tools Change the Windows crosscompiling logic: 2009-10-12 18:49:29 +00:00
uisimulator Simulator: Fix scrollwheel targets. 2009-10-06 01:26:01 +00:00
utils Make beastpatcher build with VS2005 again. 2009-09-24 20:46:19 +00:00
wps Move to only CC-BY-SA 3.0 for future changes. 2009-10-12 16:43:27 +00:00

docs/README 

               __________               __   ___.
     Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
     Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
     Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
     Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
                       \/            \/     \/    \/            \/

Build Your Own Rockbox

1. Check out 'rockbox' from SVN (or extract a downloaded archive).

   $ svn co svn://svn.rockbox.org/rockbox/trunk rockbox

     or

   $ tar xjf rockbox.tar.bz2

2. Create a build directory, preferably in the same directory as the firmware/
   and apps/ directories. This is where all generated files will be written.

   $ cd rockbox
   $ mkdir build
   $ cd build

3. Make sure you have sh/arm/m68k-elf-gcc and siblings in the PATH. Make sure
   that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
   a particular version depending on what player you are compiling for. These
   can be acquired with the rockboxdev.sh script in the /tools/ folder of the
   source, or will have been included if you've installed one of the
   toolchains or development environments provided at http://www.rockbox.org/

   $ which sh-elf-gcc
   $ which perl

4. In your build directory, run the 'tools/configure' script and enter what
   target you want to build for and if you want a debug version or not (and a
   few more questions). It'll prompt you. The debug version is for making a
   gdb version out of it. It is only useful if you run gdb towards your target
   Archos.

   $ ../tools/configure

5. *ploink*. Now you have got a Makefile generated for you.

6. Run 'make' and soon the necessary pieces from the firmware and the apps
   directories have been compiled, linked and scrambled for you.

   $ make
   $ make zip

7. unzip the rockbox.zip on your music player, reboot it and
   *smile*.

If you want to build for more than one target, just create several build
directories and create a setup for each target:

   $ mkdir build-fmrecorder
   $ cd build-fmrecorder
   $ ../tools/configure

   $ mkdir build-player
   $ cd build-player
   $ ../tools/configure

Questions anyone? Ask on the mailing list. We'll be happy to help you!