forked from len0rd/rockbox
2f16d4f1b3
Changes made: Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader. Define MODEL_NAME string in config-*.h for use in bootloader. Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S. Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe): * Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100). * Remove unused DEBUG and STUB code from crt0-pp.S. * Make CPU wait for COP to be sleeping when we put the COP to sleep. * Invalidate COP cache when COP wakes * Flush CPU cache before waking COP * Make sure only the CPU clears the BSS (not the COP) * Make sure only the CPU sets up its own stack (not the COP) Rolo works on H10, so enable it. Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657
1706 lines
46 KiB
Bash
Executable file
1706 lines
46 KiB
Bash
Executable file
#!/bin/sh
|
|
# __________ __ ___.
|
|
# Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
# Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
# Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
# Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
# \/ \/ \/ \/ \/
|
|
# $Id$
|
|
#
|
|
|
|
# global CC options for all platforms
|
|
CCOPTS="-W -Wall -O -nostdlib -ffreestanding -Wstrict-prototypes"
|
|
|
|
use_logf="#undef ROCKBOX_HAS_LOGF"
|
|
use_simsound="#undef ROCKBOX_HAS_SIMSOUND"
|
|
|
|
scriptver=`echo '$Revision$' | sed -e 's:\\$::g' -e 's/Revision: //'`
|
|
|
|
#
|
|
# Begin Function Definitions
|
|
#
|
|
input() {
|
|
read response
|
|
echo $response
|
|
}
|
|
|
|
prefixtools () {
|
|
prefix="$1"
|
|
CC=${prefix}gcc
|
|
WINDRES=${prefix}windres
|
|
DLLTOOL=${prefix}dlltool
|
|
DLLWRAP=${prefix}dllwrap
|
|
RANLIB=${prefix}ranlib
|
|
LD=${prefix}ld
|
|
AR=${prefix}ar
|
|
AS=${prefix}as
|
|
OC=${prefix}objcopy
|
|
}
|
|
|
|
crosswincc () {
|
|
# naive approach to selecting a mingw cross-compiler on linux/*nix
|
|
echo "Enabling win32 crosscompiling"
|
|
|
|
prefixtools i586-mingw32msvc-
|
|
|
|
LDOPTS="-lgdi32 -luser32 -mwindows"
|
|
# add cross-compiler option(s)
|
|
GCCOPTS="$GCCOPTS -mno-cygwin"
|
|
|
|
output="rockboxui.exe" # use this as output binary name
|
|
crosscompile="yes"
|
|
endian="little" # windows is little endian
|
|
}
|
|
|
|
checksoundcard () {
|
|
if test -n "$codecs"; then
|
|
if test -f "/usr/include/sys/soundcard.h"; then
|
|
# We have a header file so we can build the sound code
|
|
use_simsound="#define ROCKBOX_HAS_SIMSOUND 1"
|
|
echo "Enabled PCM sound playback in simulator"
|
|
fi # header file present
|
|
fi # has codecs
|
|
}
|
|
|
|
# scan the $PATH for the given command
|
|
findtool(){
|
|
file="$1"
|
|
|
|
IFS=":"
|
|
for path in $PATH
|
|
do
|
|
# echo "checks for $file in $path" >&2
|
|
if test -f "$path/$file"; then
|
|
echo "$path/$file"
|
|
return
|
|
fi
|
|
done
|
|
}
|
|
|
|
|
|
simcc () {
|
|
|
|
# default tool setup for native building
|
|
prefixtools ""
|
|
|
|
GCCOPTS='-W -Wall -g -fno-builtin'
|
|
|
|
output="rockboxui" # use this as default output binary name
|
|
|
|
if [ "$simver" = "sdl" ]; then
|
|
# generic sdl-config checker
|
|
sdl=`findtool sdl-config`
|
|
|
|
if [ -z "$sdl" ]; then
|
|
echo "configure didn't find sdl-config, which indicates that you"
|
|
echo "don't have SDL (properly) installed. Please correct and"
|
|
echo "re-run configure!"
|
|
exit
|
|
fi
|
|
fi
|
|
|
|
case $uname in
|
|
CYGWIN*)
|
|
echo "Cygwin host detected"
|
|
|
|
SHARED_FLAG="-shared"
|
|
if [ "$simver" = "win32" ]; then
|
|
# win32 version
|
|
GCCOPTS="$GCCOPTS -mno-cygwin -DNOCYGWIN"
|
|
LDOPTS="-lgdi32 -luser32 -mno-cygwin"
|
|
elif [ "$simver" = "sdl" ]; then
|
|
# sdl version
|
|
GCCOPTS="$GCCOPTS `sdl-config --cflags`"
|
|
LDOPTS="`sdl-config --libs` -mconsole"
|
|
checksoundcard
|
|
else
|
|
# x11 version
|
|
GCCOPTS="$GCCOPTS"
|
|
LDOPTS='-L/usr/X11R6/lib -lSM -lICE -lXt -lX11 -lXmu -lSM -lICE -lX11 -lpthread'
|
|
checksoundcard
|
|
fi
|
|
output="rockboxui.exe" # use this as output binary name
|
|
;;
|
|
|
|
Linux)
|
|
echo "Linux host detected"
|
|
GCCOPTS="$GCCOPTS"
|
|
SHARED_FLAG="-shared"
|
|
if [ "$simver" = "win32" ]; then
|
|
LDOPTS='-L/usr/X11R6/lib -lX11 -lm -lXt -lXmu -lnsl -ldl -lpthread'
|
|
crosswincc # setup cross-compiler
|
|
elif [ "$simver" = "sdl" ]; then
|
|
if [ "0" != `sdl-config --libs |grep -c mwindows` ]; then
|
|
# Enable crosscompiling if sdl-config is from Windows SDL
|
|
crosswincc
|
|
fi
|
|
GCCOPTS="$GCCOPTS `sdl-config --cflags`"
|
|
LDOPTS="`sdl-config --libs`"
|
|
checksoundcard
|
|
else
|
|
LDOPTS='-L/usr/X11R6/lib -lX11 -lm -lXt -lXmu -lnsl -ldl -lpthread'
|
|
checksoundcard
|
|
fi # not a cross-compiler
|
|
;;
|
|
|
|
FreeBSD)
|
|
echo "FreeBSD host detected"
|
|
LDOPTS='-L/usr/X11R6/lib -lX11 -lm -lXt -lXmu -dl -lpthread'
|
|
SHARED_FLAG="-shared"
|
|
if [ "$simver" = "win32" ]; then
|
|
crosswincc # setup cross-compiler
|
|
fi
|
|
;;
|
|
|
|
Darwin)
|
|
echo "Darwin host detected"
|
|
# sdl version
|
|
GCCOPTS="$GCCOPTS `sdl-config --cflags`"
|
|
LDOPTS="`sdl-config --libs`"
|
|
SHARED_FLAG="-dynamiclib -Wl\,-single_module"
|
|
use_simsound="#define ROCKBOX_HAS_SIMSOUND 1"
|
|
echo "Enabled PCM sound playback in simulator"
|
|
;;
|
|
|
|
*)
|
|
echo "Unsupported system: $uname, fix configure and retry"
|
|
exit
|
|
;;
|
|
esac
|
|
|
|
if [ "`uname -m`" = "x86_64" ]; then
|
|
GCCOPTS="$GCCOPTS -fPIC" # needed to make shared objects link
|
|
fi
|
|
|
|
if test "X$crosscompile" != "Xyes"; then
|
|
id=$$
|
|
cat >/tmp/conftest-$id.c <<EOF
|
|
#include <stdio.h>
|
|
int main(int argc, char **argv)
|
|
{
|
|
int var=0;
|
|
char *varp = (char *)&var;
|
|
*varp=1;
|
|
|
|
printf("%d\n", var);
|
|
return 0;
|
|
}
|
|
EOF
|
|
|
|
$CC -o /tmp/conftest-$id /tmp/conftest-$id.c 2>/dev/null
|
|
|
|
if test `/tmp/conftest-$id 2>/dev/null` -gt "1"; then
|
|
# big endian
|
|
endian="big"
|
|
else
|
|
# little endian
|
|
endian="little"
|
|
fi
|
|
echo "Simulator environment deemed $endian endian"
|
|
|
|
# use wildcard here to make it work even if it was named *.exe like
|
|
# on cygwin
|
|
rm -f /tmp/conftest-$id*
|
|
fi
|
|
}
|
|
|
|
shcc () {
|
|
prefixtools sh-elf-
|
|
GCCOPTS="$CCOPTS -m1"
|
|
GCCOPTIMIZE="-fomit-frame-pointer -fschedule-insns"
|
|
endian="big"
|
|
}
|
|
|
|
calmrisccc () {
|
|
prefixtools calmrisc16-unknown-elf-
|
|
GCCOPTS="-Wl\,--no-check-sections $CCOPTS"
|
|
GCCOPTIMIZE="-fomit-frame-pointer"
|
|
endian="big"
|
|
}
|
|
|
|
coldfirecc () {
|
|
prefixtools m68k-elf-
|
|
GCCOPTS="$CCOPTS -m5206e -Wa\,-m5249 -malign-int -mstrict-align"
|
|
GCCOPTIMIZE="-fomit-frame-pointer"
|
|
endian="big"
|
|
}
|
|
|
|
arm7tdmicc () {
|
|
prefixtools arm-elf-
|
|
GCCOPTS="$CCOPTS -mcpu=arm7tdmi"
|
|
if test "X$1" != "Xshort"; then
|
|
GCCOPTS="$GCCOPTS -ffunction-sections -mlong-calls"
|
|
fi
|
|
GCCOPTIMIZE="-fomit-frame-pointer"
|
|
endian="little"
|
|
}
|
|
|
|
arm9tdmicc () {
|
|
prefixtools arm-elf-
|
|
GCCOPTS="$CCOPTS -mcpu=arm9tdmi -ffunction-sections -mlong-calls"
|
|
GCCOPTIMIZE="-fomit-frame-pointer"
|
|
endian="little"
|
|
}
|
|
|
|
whichdevel () {
|
|
##################################################################
|
|
# Prompt for specific developer options
|
|
#
|
|
echo ""
|
|
echo "Enter your developer options (press enter when done)"
|
|
echo "(D)EBUG, (L)ogf, (S)imulator, (P)rofiling"
|
|
cont=1
|
|
|
|
while [ $cont = "1" ]; do
|
|
|
|
option=`input`;
|
|
|
|
case $option in
|
|
[Dd])
|
|
if [ "yes" = "$profile" ]; then
|
|
echo "Debug is incompatible with profiling"
|
|
else
|
|
echo "define DEBUG"
|
|
use_debug="yes"
|
|
fi
|
|
;;
|
|
[Ll])
|
|
echo "logf() support enabled"
|
|
logf="yes"
|
|
;;
|
|
[Ss])
|
|
echo "Simulator build enabled"
|
|
simulator="yes"
|
|
;;
|
|
[Pp])
|
|
if [ "yes" = "$use_debug" ]; then
|
|
echo "Profiling is incompatible with debug"
|
|
else
|
|
echo "Profiling support is enabled"
|
|
profile="yes"
|
|
fi
|
|
;;
|
|
*)
|
|
echo "done"
|
|
cont=0
|
|
;;
|
|
esac
|
|
done
|
|
|
|
if [ "yes" = "$use_debug" ]; then
|
|
debug="-DDEBUG"
|
|
GCCOPTS="$GCCOPTS -g -DDEBUG"
|
|
fi
|
|
if [ "yes" = "$logf" ]; then
|
|
use_logf="#define ROCKBOX_HAS_LOGF 1"
|
|
fi
|
|
if [ "yes" = "$simulator" ]; then
|
|
debug="-DDEBUG"
|
|
extradefines="$extradefines -DSIMULATOR"
|
|
whichsim
|
|
fi
|
|
if [ "yes" = "$profile" ]; then
|
|
extradefines="$extradefines -DRB_PROFILE"
|
|
PROFILE_OPTS="-finstrument-functions"
|
|
fi
|
|
}
|
|
|
|
whichsim () {
|
|
|
|
if [ -z "$simver" ]; then
|
|
|
|
##################################################################
|
|
# Figure out what simulator version
|
|
#
|
|
# x11 is deprecated so hide it from the question
|
|
# win32 is also deprecated
|
|
#
|
|
echo ""
|
|
echo "Build (S)DL version? (S)"
|
|
|
|
option=`input`;
|
|
|
|
case $option in
|
|
[Ww])
|
|
simver="win32"
|
|
|
|
WINDRES=windres
|
|
DLLTOOL=dlltool
|
|
DLLWRAP=dllwrap
|
|
|
|
# make sure the code knows this is for win32
|
|
extradefines="$extradefines -DWIN32"
|
|
;;
|
|
[Xx])
|
|
simver="x11"
|
|
extradefines="$extradefines -DX11"
|
|
;;
|
|
[Ss]|*)
|
|
simver="sdl"
|
|
extradefines="$extradefines -DSDL"
|
|
;;
|
|
esac
|
|
echo "Selected $simver simulator"
|
|
fi
|
|
}
|
|
|
|
voiceconfig () {
|
|
echo "Building voice for $archos"
|
|
echo ""
|
|
|
|
if [ `which flite` ]; then
|
|
FLITE="F(l)ite "
|
|
FLITE_OPTS="FLITE_OPTS=\"\""
|
|
DEFAULT_TTS="flite"
|
|
DEFAULT_TTS_OPTS=$FLITE_OPTS
|
|
DEFAULT_NOISEFLOOR="500"
|
|
DEFAULT_CHOICE="L"
|
|
fi
|
|
if [ `which speak` ]; then
|
|
ESPEAK="(e)Speak "
|
|
ESPEAK_OPTS="ESPEAK_OPTS=\"\""
|
|
DEFAULT_TTS="espeak"
|
|
DEFAULT_TTS_OPTS=$ESPEAK_OPTS
|
|
DEFAULT_NOISEFLOOR="500"
|
|
DEFAULT_CHOICE="e"
|
|
fi
|
|
if [ `which festival` ]; then
|
|
FESTIVAL="(F)estival "
|
|
FESTIVAL_OPTS="FLITE_OPTS=\"\""
|
|
DEFAULT_TTS="festival"
|
|
DEFAULT_TTS_OPTS=$FESTIVAL_OPTS
|
|
DEFAULT_NOISEFLOOR="500"
|
|
DEFAULT_CHOICE="F"
|
|
fi
|
|
|
|
if [ "$FESTIVAL" = "$FLITE" ] && [ "$FLITE" = "$ESPEAK" ]; then
|
|
echo "You need Festival, eSpeak or Flite in your path to build voice files"
|
|
exit
|
|
fi
|
|
|
|
echo "TTS engine to use: ${FLITE}${FESTIVAL}${ESPEAK}(${DEFAULT_CHOICE})?"
|
|
option=`input`
|
|
case "$option" in
|
|
[Ll])
|
|
TTS_ENGINE="flite"
|
|
NOISEFLOOR="500" # TODO: check this value
|
|
TTS_OPTS=$FLITE_OPTS
|
|
;;
|
|
[Ee])
|
|
TTS_ENGINE="espeak"
|
|
NOISEFLOOR="500"
|
|
TTS_OPTS=$ESPEAK_OPTS
|
|
;;
|
|
[Ff])
|
|
TTS_ENGINE="festival"
|
|
NOISEFLOOR="500"
|
|
TTS_OPTS=$FESTIVAL_OPTS
|
|
;;
|
|
*)
|
|
TTS_ENGINE=$DEFAULT_TTS
|
|
TTS_OPTS=$DEFAULT_TTS_OPTS
|
|
NOISEFLOOR=$DEFAULT_NOISEFLOOR
|
|
esac
|
|
echo "Using $TTS_ENGINE for TTS"
|
|
|
|
echo ""
|
|
|
|
if [ `which oggenc` ]; then
|
|
OGGENC="(O)ggenc "
|
|
DEFAULT_ENC="oggenc"
|
|
VORBIS_OPTS="VORBIS_OPTS=\"-q0 --downmix\""
|
|
DEFAULT_ENC_OPTS=$VORBIS_OPTS
|
|
DEFAULT_CHOICE="O"
|
|
fi
|
|
if [ `which speexenc` ]; then
|
|
SPEEXENC="(S)peexenc "
|
|
DEFAULT_ENC="speexenc"
|
|
SPEEX_OPTS="" # TODO: find appropriate options for speex
|
|
DEFAULT_ENC_OPTS=$SPEEX_OPTS
|
|
DEFAULT_CHOICE="S"
|
|
fi
|
|
if [ `which lame` ]; then
|
|
LAME="(L)ame "
|
|
DEFAULT_ENC="lame"
|
|
LAME_OPTS="LAME_OPTS=\"--resample 12 -t -m m -h -V 9 -S\""
|
|
DEFAULT_ENC_OPTS=$LAME_OPTS
|
|
DEFAULT_CHOICE="L"
|
|
fi
|
|
|
|
if [ "$LAME" = "" ]; then
|
|
echo "You need to have Lame installed to build voice files"
|
|
fi
|
|
|
|
echo "Encoder to use: ${LAME}${OGGENC}${SPEEXENC}(${DEFAULT_CHOICE})?"
|
|
echo ""
|
|
echo "Note: Use Lame - the other options won't work"
|
|
option=`input`
|
|
case "$option" in
|
|
[Oo])
|
|
ENCODER="oggenc"
|
|
ENC_OPTS=$VORBIS_OPTS
|
|
;;
|
|
[Ss])
|
|
ENCODER="speexenc"
|
|
ENC_OPTS=$SPEEX_OPTS
|
|
;;
|
|
[Ll])
|
|
ENCODER="lame"
|
|
ENC_OPTS=$LAME_OPTS
|
|
;;
|
|
*)
|
|
ENCODER=$DEFAULT_ENC
|
|
ENC_OPTS=$DEFAULT_ENC_OPTS
|
|
esac
|
|
echo "Using $ENCODER for encoding voice clips"
|
|
|
|
cat > voicesettings.sh <<EOF
|
|
TTS_ENGINE="${TTS_ENGINE}"
|
|
ENCODER="${ENCODER}"
|
|
TEMPDIR="${pwd}"
|
|
NOISEFLOOR="${NOISEFLOOR}"
|
|
${TTS_OPTS}
|
|
${ENC_OPTS}
|
|
EOF
|
|
}
|
|
|
|
picklang() {
|
|
# figure out which languages that are around
|
|
for file in $rootdir/apps/lang/*.lang; do
|
|
clean=`echo $file | sed -e 's:.*/::g' | cut "-d." -f1`
|
|
langs="$langs $clean"
|
|
done
|
|
|
|
num=1
|
|
for one in $langs; do
|
|
echo "$num. $one"
|
|
num=`expr $num + 1`
|
|
done
|
|
|
|
read pick
|
|
return $pick;
|
|
}
|
|
|
|
whichlang() {
|
|
num=1
|
|
for one in $langs; do
|
|
if [ "$num" = "$pick" ]; then
|
|
echo $one
|
|
return
|
|
fi
|
|
num=`expr $num + 1`
|
|
done
|
|
}
|
|
|
|
target=$1
|
|
|
|
if test "$target" = "--help"; then
|
|
echo "Rockbox configure script."
|
|
echo "Invoke this in a directory to generate a Makefile to build Rockbox"
|
|
echo "Do *NOT* run this within the tools directory!"
|
|
echo ""
|
|
echo "Usage: configure [--ccache][--no-ccache]"
|
|
exit
|
|
fi
|
|
|
|
if test -r "configure"; then
|
|
# this is a check for a configure script in the current directory, it there
|
|
# is one, try to figure out if it is this one!
|
|
|
|
if { grep "^# Jukebox" configure >/dev/null 2>&1 ; } then
|
|
echo "WEEEEEEEEP. Don't run this configure script within the tools directory."
|
|
echo "It will only cause you pain and grief. Instead do this:"
|
|
echo ""
|
|
echo " cd .."
|
|
echo " mkdir build-dir"
|
|
echo " cd build-dir"
|
|
echo " ../tools/configure"
|
|
echo ""
|
|
echo "Much happiness will arise from this. Enjoy"
|
|
exit
|
|
fi
|
|
fi
|
|
|
|
# get our current directory
|
|
pwd=`pwd`;
|
|
|
|
if [ -z "$rootdir" ]; then
|
|
##################################################################
|
|
# Figure out where the source code root is!
|
|
#
|
|
rootdir=`dirname $0`/../
|
|
|
|
#####################################################################
|
|
# Convert the possibly relative directory name to an absolute version
|
|
#
|
|
now=`pwd`
|
|
cd $rootdir
|
|
rootdir=`pwd`
|
|
|
|
# cd back to the build dir
|
|
cd $now
|
|
fi
|
|
|
|
apps="apps"
|
|
appsdir='\$(ROOTDIR)/apps'
|
|
firmdir='\$(ROOTDIR)/firmware'
|
|
toolsdir='\$(ROOTDIR)/tools'
|
|
|
|
|
|
##################################################################
|
|
# Figure out target platform
|
|
#
|
|
|
|
echo "Enter target platform:"
|
|
cat <<EOF
|
|
==Archos== ==iriver== ==Apple iPod==
|
|
0) Player/Studio 10) H120/H140 20) Color/Photo
|
|
1) Recorder 11) H320/H340 21) Nano
|
|
2) FM Recorder 12) iHP-100/110/115 22) Video
|
|
3) Recorder v2 13) iFP-790 23) 3G
|
|
4) Ondio SP 14) H10 20Gb 24) 4G Grayscale
|
|
5) Ondio FM 15) H10 5/6Gb 25) Mini 1G
|
|
26) Mini 2G
|
|
|
|
==iAudio== ==Toshiba== ==SanDisk==
|
|
30) X5/X5V/X5L 40) Gigabeat F 50) Sansa e200
|
|
|
|
==Tatung==
|
|
60) Elio TPJ-1022
|
|
EOF
|
|
|
|
buildfor=`input`;
|
|
|
|
# Set of tools built for all target platforms:
|
|
toolset="rdf2binary convbdf"
|
|
|
|
# Toolsets for some target families:
|
|
archosbitmaptools="$toolset scramble descramble sh2d uclpack bmp2rb codepages"
|
|
iriverbitmaptools="$toolset scramble descramble mkboot bmp2rb codepages"
|
|
iaudiobitmaptools="$toolset scramble descramble mkboot bmp2rb codepages"
|
|
ipodbitmaptools="$toolset scramble ipod_fw bmp2rb codepages"
|
|
gigabeatbitmaptools="$toolset scramble descramble bmp2rb codepages"
|
|
# generic is used by IFP, H10, Sansa-e200
|
|
genericbitmaptools="$toolset bmp2rb codepages"
|
|
|
|
|
|
# ---- For each target ----
|
|
#
|
|
# *Variables*
|
|
# target_id: a unique number identifying this target, DOES NOT necessarily
|
|
# have to be the menu number. Just use the currently highest
|
|
# number+1 when you add a new target.
|
|
# archos: short model name used all over to identify this target
|
|
# target: -Ddefine passed to the build commands to make the correct
|
|
# config-*.h file get included etc
|
|
# tool: the tool that takes a plain binary and converts that into a
|
|
# working "firmware" file for your target
|
|
# output: the final output file name
|
|
# boottool: the tool that takes a plain binary and generates a bootloader
|
|
# file for your target (or blank to use $tool)
|
|
# bootoutput:the final output file name for the bootloader (or blank to use
|
|
# $output)
|
|
# appextra: passed to the APPEXTRA variable in the Makefiles.
|
|
# TODO: add proper explanation
|
|
# archosrom: used only for Archos targets that build a special flashable .ucl
|
|
# image. Set to blank for other builds.
|
|
# flash: the same as archosrom. These two should be merged
|
|
# plugins: set to 'yes' to build the plugins. Early development builds can
|
|
# set this to no in the early stages to have an easier life for a
|
|
# while
|
|
# codecs: lists codecs to build for this target
|
|
# toolset: lists what particular tools in the tools/ directory that this
|
|
# target needs to have built prior to building Rockbox
|
|
#
|
|
# *Functions*
|
|
# *cc: sets up gcc and compiler options for your target builds. Note
|
|
# that if you select a simulator build, the compiler selection is
|
|
# overridden later in the script.
|
|
|
|
case $buildfor in
|
|
|
|
0|player)
|
|
target_id=1
|
|
archos="player"
|
|
target="-DARCHOS_PLAYER"
|
|
shcc
|
|
tool="$rootdir/tools/scramble"
|
|
output="archos.mod"
|
|
appextra="player:gui"
|
|
archosrom="$pwd/rombox.ucl"
|
|
flash="$pwd/rockbox.ucl"
|
|
plugins="yes"
|
|
codecs=""
|
|
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset="$toolset scramble descramble sh2d generate_rocklatin uclpack"
|
|
|
|
# Note: the convbdf is present in the toolset just because: 1) the
|
|
# firmware/Makefile assumes it is present always, and 2) we will need it when we
|
|
# build the player simulator
|
|
|
|
t_cpu="sh"
|
|
t_manufacturer="archos"
|
|
t_model="player"
|
|
;;
|
|
|
|
1|recorder)
|
|
target_id=2
|
|
archos="recorder"
|
|
target="-DARCHOS_RECORDER"
|
|
shcc
|
|
tool="$rootdir/tools/scramble"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 0"
|
|
output="ajbrec.ajz"
|
|
appextra="recorder:gui"
|
|
archosrom="$pwd/rombox.ucl"
|
|
flash="$pwd/rockbox.ucl"
|
|
plugins="yes"
|
|
codecs=""
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$archosbitmaptools
|
|
t_cpu="sh"
|
|
t_manufacturer="archos"
|
|
t_model="recorder"
|
|
;;
|
|
|
|
2|fmrecorder)
|
|
target_id=3
|
|
archos="fmrecorder"
|
|
target="-DARCHOS_FMRECORDER"
|
|
shcc
|
|
tool="$rootdir/tools/scramble -fm"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 0"
|
|
output="ajbrec.ajz"
|
|
appextra="recorder:gui"
|
|
archosrom="$pwd/rombox.ucl"
|
|
flash="$pwd/rockbox.ucl"
|
|
plugins="yes"
|
|
codecs=""
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$archosbitmaptools
|
|
t_cpu="sh"
|
|
t_manufacturer="archos"
|
|
t_model="fm_v2"
|
|
;;
|
|
|
|
3|recorderv2)
|
|
target_id=4
|
|
archos="recorderv2"
|
|
target="-DARCHOS_RECORDERV2"
|
|
shcc
|
|
tool="$rootdir/tools/scramble -v2"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 0"
|
|
output="ajbrec.ajz"
|
|
appextra="recorder:gui"
|
|
archosrom="$pwd/rombox.ucl"
|
|
flash="$pwd/rockbox.ucl"
|
|
plugins="yes"
|
|
codecs=""
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$archosbitmaptools
|
|
t_cpu="sh"
|
|
t_manufacturer="archos"
|
|
t_model="fm_v2"
|
|
;;
|
|
|
|
4|ondiosp)
|
|
target_id=7
|
|
archos="ondiosp"
|
|
target="-DARCHOS_ONDIOSP"
|
|
shcc
|
|
tool="$rootdir/tools/scramble -osp"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 0"
|
|
output="ajbrec.ajz"
|
|
appextra="recorder:gui"
|
|
archosrom="$pwd/rombox.ucl"
|
|
flash="$pwd/rockbox.ucl"
|
|
plugins="yes"
|
|
codecs=""
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$archosbitmaptools
|
|
t_cpu="sh"
|
|
t_manufacturer="archos"
|
|
t_model="ondio"
|
|
;;
|
|
|
|
5|ondiofm)
|
|
target_id=8
|
|
archos="ondiofm"
|
|
target="-DARCHOS_ONDIOFM"
|
|
shcc
|
|
tool="$rootdir/tools/scramble -ofm"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 0"
|
|
output="ajbrec.ajz"
|
|
appextra="recorder:gui"
|
|
archosrom="$pwd/rombox.ucl"
|
|
flash="$pwd/rockbox.ucl"
|
|
plugins="yes"
|
|
codecs=""
|
|
toolset=$archosbitmaptools
|
|
t_cpu="sh"
|
|
t_manufacturer="archos"
|
|
t_model="ondio"
|
|
;;
|
|
|
|
10|h120)
|
|
target_id=9
|
|
archos="h120"
|
|
target="-DIRIVER_H120"
|
|
memory=32 # always
|
|
coldfirecc
|
|
tool="$rootdir/tools/scramble -add=h120"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 2"
|
|
bmp2rb_remotemono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_remotenative="$rootdir/tools/bmp2rb -f 0"
|
|
output="rockbox.iriver"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$iriverbitmaptools
|
|
t_cpu="coldfire"
|
|
t_manufacturer="iriver"
|
|
t_model="h100"
|
|
;;
|
|
|
|
11|h300)
|
|
target_id=10
|
|
archos="h300"
|
|
target="-DIRIVER_H300"
|
|
memory=32 # always
|
|
coldfirecc
|
|
tool="$rootdir/tools/scramble -add=h300"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
|
|
bmp2rb_remotemono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_remotenative="$rootdir/tools/bmp2rb -f 0"
|
|
output="rockbox.iriver"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$iriverbitmaptools
|
|
t_cpu="coldfire"
|
|
t_manufacturer="iriver"
|
|
t_model="h300"
|
|
;;
|
|
|
|
12|h100)
|
|
target_id=11
|
|
archos="h100"
|
|
target="-DIRIVER_H100"
|
|
memory=16 # always
|
|
coldfirecc
|
|
tool="$rootdir/tools/scramble -add=h100"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 2"
|
|
bmp2rb_remotemono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_remotenative="$rootdir/tools/bmp2rb -f 0"
|
|
output="rockbox.iriver"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$iriverbitmaptools
|
|
t_cpu="coldfire"
|
|
t_manufacturer="iriver"
|
|
t_model="h100"
|
|
;;
|
|
|
|
30|x5)
|
|
target_id=12
|
|
archos="x5"
|
|
target="-DIAUDIO_X5"
|
|
memory=16 # always
|
|
coldfirecc
|
|
tool="$rootdir/tools/scramble -add=iax5"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
|
|
bmp2rb_remotemono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_remotenative="$rootdir/tools/bmp2rb -f 7"
|
|
output="rockbox.iaudio"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset="$iaudiobitmaptools"
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="coldfire"
|
|
t_manufacturer="iaudio"
|
|
t_model="x5"
|
|
;;
|
|
|
|
20|ipodcolor)
|
|
target_id=13
|
|
archos="ipodcolor"
|
|
target="-DIPOD_COLOR"
|
|
memory=32 # always
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add=ipco"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 5"
|
|
output="rockbox.ipod"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
bootoutput="bootloader-$archos.ipod"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$ipodbitmaptools
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="ipod"
|
|
t_model="color"
|
|
;;
|
|
|
|
21|ipodnano)
|
|
target_id=14
|
|
archos="ipodnano"
|
|
target="-DIPOD_NANO"
|
|
memory=32 # always
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add=nano"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 5"
|
|
output="rockbox.ipod"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
bootoutput="bootloader-$archos.ipod"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$ipodbitmaptools
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="ipod"
|
|
t_model="nano"
|
|
;;
|
|
|
|
22|ipodvideo)
|
|
target_id=15
|
|
archos="ipodvideo"
|
|
target="-DIPOD_VIDEO"
|
|
memory=32 # 30GB models have 32MB, 60GB have 64MB
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add=ipvd"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
|
|
output="rockbox.ipod"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
bootoutput="bootloader-$archos.ipod"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$ipodbitmaptools
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="ipod"
|
|
t_model="video"
|
|
;;
|
|
|
|
23|ipod3g)
|
|
target_id=16
|
|
archos="ipod3g"
|
|
target="-DIPOD_3G"
|
|
memory=32 # always
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add=ip3g"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 6"
|
|
output="rockbox.ipod"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
bootoutput="bootloader-$archos.ipod"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$ipodbitmaptools
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="ipod"
|
|
t_model="3g"
|
|
;;
|
|
|
|
24|ipod4g)
|
|
target_id=17
|
|
archos="ipod4g"
|
|
target="-DIPOD_4G"
|
|
memory=32 # always
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add=ip4g"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 6"
|
|
output="rockbox.ipod"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
bootoutput="bootloader-$archos.ipod"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$ipodbitmaptools
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="ipod"
|
|
t_model="4g"
|
|
;;
|
|
|
|
25|ipodmini)
|
|
target_id=18
|
|
archos="ipodmini"
|
|
target="-DIPOD_MINI"
|
|
memory=32 # always
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add=mini"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 6"
|
|
output="rockbox.ipod"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
bootoutput="bootloader-$archos.ipod"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$ipodbitmaptools
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="ipod"
|
|
t_model="mini"
|
|
;;
|
|
|
|
13|ifp7xx)
|
|
target_id=19
|
|
archos="ifp7xx"
|
|
target="-DIRIVER_IFP7XX"
|
|
memory=1
|
|
arm7tdmicc short
|
|
tool="cp"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 0"
|
|
output="rockbox.wma"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$genericbitmaptools
|
|
t_cpu="arm"
|
|
t_manufacturer="iriver"
|
|
t_model="ifp7xx"
|
|
;;
|
|
|
|
40|gigabeatf)
|
|
target_id=20
|
|
archos="gigabeatf"
|
|
target="-DGIGABEAT_F"
|
|
memory=32 # always
|
|
arm9tdmicc
|
|
tool="cp"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
|
|
output="rockbox.gigabeat"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
toolset=$gigabeatbitmaptools
|
|
boottool="$rootdir/tools/scramble -gigabeat"
|
|
bootoutput="FWIMG01.DAT"
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="gigabeat"
|
|
t_model="meg-fx"
|
|
;;
|
|
|
|
26|ipodmini2g)
|
|
target_id=21
|
|
archos="ipodmini2g"
|
|
target="-DIPOD_MINI2G"
|
|
memory=32 # always
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add=mn2g"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 6"
|
|
output="rockbox.ipod"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
bootoutput="bootloader-$archos.ipod"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset=$ipodbitmaptools
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="ipod"
|
|
t_model="mini2g"
|
|
;;
|
|
|
|
14|h10)
|
|
target_id=22
|
|
archos="h10"
|
|
target="-DIRIVER_H10"
|
|
memory=32 # always
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add=h10"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
|
|
output="rockbox.h10"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
boottool="$rootdir/tools/scramble -mi4v3"
|
|
bootoutput="H10_20GC.mi4"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset="$genericbitmaptools scramble"
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="iriver"
|
|
t_model="h10"
|
|
;;
|
|
|
|
50|e200)
|
|
target_id=23
|
|
archos="e200"
|
|
target="-DSANSA_E200"
|
|
memory=32 # supposedly
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add=e200"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
|
|
output="rockbox.e200"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
boottool="$rootdir/tools/scramble -mi4v3"
|
|
bootoutput="PP5022.mi4"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset="$genericbitmaptools scramble"
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="sandisk"
|
|
t_model="sansa-e200"
|
|
;;
|
|
|
|
15|h10_5gb)
|
|
target_id=24
|
|
archos="h10_5gb"
|
|
target="-DIRIVER_H10_5GB"
|
|
memory=32 # always
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add=h10_5gb"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 5"
|
|
output="rockbox.h10"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
boottool="$rootdir/tools/scramble -mi4v2"
|
|
bootoutput="H10.mi4"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset="$genericbitmaptools scramble"
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="iriver"
|
|
t_model="h10"
|
|
;;
|
|
|
|
60|tpj1022)
|
|
target_id=25
|
|
archos="tpj1022"
|
|
target="-DELIO_TPJ1022"
|
|
memory=32 # always
|
|
arm7tdmicc
|
|
tool="$rootdir/tools/scramble -add tpj2"
|
|
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
|
bmp2rb_native="$rootdir/tools/bmp2rb -f 5"
|
|
output="rockbox.elio"
|
|
appextra="recorder:gui"
|
|
archosrom=""
|
|
flash=""
|
|
plugins="yes"
|
|
codecs="libmad liba52 libffmpegFLAC libTremor libwavpack libmusepack libalac libfaad libm4a"
|
|
boottool="$rootdir/tools/scramble -mi4v2"
|
|
bootoutput="pp5020.mi4"
|
|
# toolset is the tools within the tools directory that we build for
|
|
# this particular target.
|
|
toolset="$genericbitmaptools scramble"
|
|
# architecture, manufacturer and model for the target-tree build
|
|
t_cpu="arm"
|
|
t_manufacturer="tatung"
|
|
t_model="tpj1022"
|
|
;;
|
|
|
|
*)
|
|
echo "Please select a supported target platform!"
|
|
exit
|
|
;;
|
|
|
|
esac
|
|
|
|
echo "Platform set to $archos"
|
|
|
|
|
|
############################################################################
|
|
# Amount of memory, for those that can differ.
|
|
#
|
|
|
|
if [ -z "$memory" ]; then
|
|
size="2"
|
|
if [ -z "$update" ]; then
|
|
echo "Enter size of your RAM (in MB): (defaults to 2)"
|
|
size=`input`;
|
|
fi
|
|
|
|
case $size in
|
|
8)
|
|
memory="8"
|
|
;;
|
|
*)
|
|
memory="2"
|
|
;;
|
|
|
|
esac
|
|
echo "Memory size selected: $memory MB"
|
|
fi
|
|
|
|
##################################################################
|
|
# Figure out build "type"
|
|
#
|
|
|
|
# the ifp7x0 is the only platform that supports building a gdb stub like
|
|
# this
|
|
case $archos in
|
|
ifp7xx)
|
|
gdbstub="(G)DB stub, "
|
|
;;
|
|
*)
|
|
;;
|
|
esac
|
|
|
|
echo ""
|
|
echo "Build (N)ormal, (D)evel, (S)imulator, (B)ootloader, $gdbstub(M)anual, (V)oice? (N)"
|
|
|
|
option=`input`;
|
|
|
|
case $option in
|
|
[Bb])
|
|
if test -n "$archosrom"; then
|
|
# Archos SH-based players do this somewhat differently for
|
|
# some reason
|
|
extradefines="-DBOOTLOADER -ffunction-sections -fdata-sections"
|
|
appsdir='\$(ROOTDIR)/flash/bootbox'
|
|
apps="bootbox"
|
|
else
|
|
extradefines="-DBOOTLOADER" # for target makefile symbol EXTRA_DEFINES
|
|
appsdir='\$(ROOTDIR)/bootloader'
|
|
apps="bootloader"
|
|
if test -n "$boottool"; then
|
|
tool="$boottool"
|
|
fi
|
|
if test -n "$bootoutput"; then
|
|
output=$bootoutput
|
|
fi
|
|
fi
|
|
bootloader="1"
|
|
echo "Bootloader build selected"
|
|
;;
|
|
[Ss])
|
|
debug="-DDEBUG"
|
|
simulator="yes"
|
|
extradefines="-DSIMULATOR"
|
|
echo "Simulator build selected"
|
|
whichsim
|
|
;;
|
|
[Dd])
|
|
echo "Devel build selected"
|
|
whichdevel
|
|
;;
|
|
[Gg])
|
|
extradefines="-DSTUB" # for target makefile symbol EXTRA_DEFINES
|
|
appsdir='\$(ROOTDIR)/gdb'
|
|
apps="stub"
|
|
case $archos in
|
|
ifp7xx)
|
|
output="stub.wma"
|
|
;;
|
|
*)
|
|
;;
|
|
esac
|
|
echo "GDB stub build selected"
|
|
;;
|
|
[Mm])
|
|
appsdir='\$(ROOTDIR)/manual'
|
|
firmdir='\$(ROOTDIR)/manual/platform' # No Makefile here. Effectively ignores target
|
|
toolsdir=$firmdir;
|
|
toolset='';
|
|
apps="manual"
|
|
echo "Manual build selected"
|
|
;;
|
|
[Vv])
|
|
echo "Voice build selected"
|
|
voiceconfig
|
|
toolset="${toolset} voicefont wavtrim"
|
|
voice="yes"
|
|
;;
|
|
*)
|
|
debug=""
|
|
echo "Normal build selected"
|
|
;;
|
|
|
|
esac
|
|
# to be able running "make manual" from non-manual configuration
|
|
case $archos in
|
|
fmrecorder)
|
|
manualdev="recorderv2fm"
|
|
;;
|
|
recorderv2)
|
|
manualdev="recorderv2fm"
|
|
;;
|
|
h1??)
|
|
manualdev="h1xx"
|
|
;;
|
|
ipodmini2g)
|
|
manualdev="ipodmini"
|
|
;;
|
|
*)
|
|
manualdev=$archos
|
|
;;
|
|
esac
|
|
|
|
if [ -z "$debug" ]; then
|
|
GCCOPTS="$GCCOPTS $GCCOPTIMIZE"
|
|
fi
|
|
|
|
echo "Using source code root directory: $rootdir"
|
|
|
|
# this was once possible to change at build-time, but no more:
|
|
language="english"
|
|
|
|
# Ask about language if building voice
|
|
if [ "yes" = "$voice" ]; then
|
|
echo "Select a number for the language to use (default is english)"
|
|
|
|
picklang
|
|
language=`whichlang`
|
|
|
|
if [ -z "$language" ]; then
|
|
# pick a default
|
|
language="english"
|
|
fi
|
|
echo "Language set to $language"
|
|
fi
|
|
|
|
uname=`uname`
|
|
|
|
if [ "yes" = "$simulator" ]; then
|
|
# setup compiler and things for simulator
|
|
simcc
|
|
|
|
if [ -d "archos" ]; then
|
|
echo "sub directory archos already present"
|
|
else
|
|
mkdir archos
|
|
echo "created an archos subdirectory for simulating the hard disk"
|
|
fi
|
|
fi
|
|
|
|
# Now, figure out version number of the (gcc) compiler we are about to use
|
|
gccver=`$CC -dumpversion`;
|
|
|
|
if [ -z "$gccver" ]; then
|
|
echo "WARNING: The compiler you must use ($CC) is not in your path!"
|
|
echo "WARNING: this may cause your build to fail since we cannot do the"
|
|
echo "WARNING: checks we want now."
|
|
else
|
|
|
|
# gccver should now be "3.3.5", "3.4.3", "2.95.3-6" and similar, but don't
|
|
# DEPEND on it
|
|
|
|
num1=`echo $gccver | cut -d . -f1`
|
|
num2=`echo $gccver | cut -d . -f2`
|
|
gccnum=`(expr $num1 "*" 100 + $num2) 2>/dev/null`
|
|
|
|
# This makes:
|
|
# 3.3.X => 303
|
|
# 3.4.X => 304
|
|
# 2.95.3 => 295
|
|
|
|
echo "Using $CC $gccver ($gccnum)"
|
|
|
|
if test "$gccnum" -ge "400"; then
|
|
# gcc 4.0 is just *so* much pickier on arguments that differ in signedness
|
|
# so we ignore that warnings for now
|
|
# -Wno-pointer-sign
|
|
GCCOPTS="$GCCOPTS -Wno-pointer-sign"
|
|
fi
|
|
|
|
if test "$gccnum" -ge "401"; then
|
|
# this is a lame hack to avoid "warning: dereferencing type-punned pointer
|
|
# will break strict-aliasing rules"
|
|
|
|
GCCOPTS="$GCCOPTS -fno-strict-aliasing"
|
|
fi
|
|
|
|
fi
|
|
|
|
# check the compiler for SH platforms
|
|
if test "$CC" = "sh-elf-gcc"; then
|
|
if test "$gccnum" -lt "400"; then
|
|
echo "WARNING: Consider upgrading your compiler to the 4.0.X series!"
|
|
echo "WARNING: http://www.rockbox.org/twiki/bin/view/Main/CrossCompiler"
|
|
else
|
|
# figure out patch status
|
|
gccpatch=`$CC --version`;
|
|
|
|
if { echo $gccpatch | grep "rockbox" >/dev/null 2>&1; } then
|
|
echo "gcc $gccver is rockbox patched"
|
|
# then convert -O to -Os to get smaller binaries!
|
|
GCCOPTS=`echo $GCCOPTS | sed 's/ -O / -Os /'`
|
|
else
|
|
echo "WARNING: You use an unpatched gcc compiler: $gccver"
|
|
echo "WARNING: http://www.rockbox.org/twiki/bin/view/Main/CrossCompiler"
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
if test "$1" = "--ccache"; then
|
|
echo "Enable ccache for building"
|
|
ccache="ccache"
|
|
else
|
|
if test "$1" != "--no-ccache"; then
|
|
ccache=`findtool ccache`
|
|
if test -n "$ccache"; then
|
|
echo "Found and uses ccache ($ccache)"
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
if test -n "$ccache"; then
|
|
CC="$ccache $CC"
|
|
fi
|
|
|
|
if test "X$endian" = "Xbig"; then
|
|
defendian="ROCKBOX_BIG_ENDIAN"
|
|
else
|
|
defendian="ROCKBOX_LITTLE_ENDIAN"
|
|
fi
|
|
|
|
sed > autoconf.h \
|
|
-e "s,@ENDIAN@,${defendian},g" \
|
|
-e "s,^#undef ROCKBOX_HAS_LOGF,$use_logf,g" \
|
|
-e "s,@SIMSOUND@,$use_simsound,g" \
|
|
<<EOF
|
|
/* This header was made by configure */
|
|
#ifndef __BUILD_AUTOCONF_H
|
|
#define __BUILD_AUTOCONF_H
|
|
|
|
/* Define endianess for the target or simulator platform */
|
|
#define @ENDIAN@ 1
|
|
|
|
/* Define this if you build rockbox to support the logf logging and display */
|
|
#undef ROCKBOX_HAS_LOGF
|
|
|
|
/* Define this if you have the linux/soundcard.h header and thus can compile
|
|
the sound-playing code in the X11 sim */
|
|
@SIMSOUND@
|
|
|
|
#endif /* __BUILD_AUTOCONF_H */
|
|
EOF
|
|
|
|
if test -n "$t_cpu"; then
|
|
TARGET_INC="-I\$(FIRMDIR)/target/$t_cpu/$t_manufacturer/$t_model"
|
|
TARGET_INC="$TARGET_INC -I\$(FIRMDIR)/target/$t_cpu/$t_manufacturer"
|
|
TARGET_INC="$TARGET_INC -I\$(FIRMDIR)/target/$t_cpu"
|
|
GCCOPTS="$GCCOPTS"
|
|
fi
|
|
|
|
if test "$simulator" = "yes"; then
|
|
# add simul make stuff on the #SIMUL# line
|
|
simmagic1="s,@SIMUL1@,\$(SILENT)\$(MAKE) -C \$(SIMDIR) OBJDIR=\$(BUILDDIR)/sim,"
|
|
simmagic2="s,@SIMUL2@,\$(SILENT)\$(MAKE) -C \$(ROOTDIR)/uisimulator/common OBJDIR=\$(BUILDDIR)/comsim,"
|
|
else
|
|
# delete the lines that match
|
|
simmagic1='/@SIMUL1@/D'
|
|
simmagic2='/@SIMUL2@/D'
|
|
fi
|
|
|
|
sed > Makefile \
|
|
-e "s,@ROOTDIR@,${rootdir},g" \
|
|
-e "s,@DEBUG@,${debug},g" \
|
|
-e "s,@MEMORY@,${memory},g" \
|
|
-e "s,@TARGET_ID@,${target_id},g" \
|
|
-e "s,@TARGET@,${target},g" \
|
|
-e "s,@ARCHOS@,${archos},g" \
|
|
-e "s,@LANGUAGE@,${language},g" \
|
|
-e "s,@PWD@,${pwd},g" \
|
|
-e "s,@CC@,${CC},g" \
|
|
-e "s,@LD@,${LD},g" \
|
|
-e "s,@AR@,${AR},g" \
|
|
-e "s,@AS@,${AS},g" \
|
|
-e "s,@OC@,${OC},g" \
|
|
-e "s,@WINDRES@,${WINDRES},g" \
|
|
-e "s,@DLLTOOL@,${DLLTOOL},g" \
|
|
-e "s,@DLLWRAP@,${DLLWRAP},g" \
|
|
-e "s,@RANLIB@,${RANLIB},g" \
|
|
-e "s,@TOOL@,${tool},g" \
|
|
-e "s,@BMP2RB_NATIVE@,${bmp2rb_native},g" \
|
|
-e "s,@BMP2RB_MONO@,${bmp2rb_mono},g" \
|
|
-e "s,@BMP2RB_REMOTENATIVE@,${bmp2rb_remotenative},g" \
|
|
-e "s,@BMP2RB_REMOTEMONO@,${bmp2rb_remotemono},g" \
|
|
-e "s,@OUTPUT@,${output},g" \
|
|
-e "s,@APPEXTRA@,${appextra},g" \
|
|
-e "s,@ARCHOSROM@,${archosrom},g" \
|
|
-e "s,@FLASHFILE@,${flash},g" \
|
|
-e "s,@PLUGINS@,${plugins},g" \
|
|
-e "s,@CODECS@,${codecs},g" \
|
|
-e "s,@PROFILE_OPTS@,${PROFILE_OPTS},g" \
|
|
-e "s,@SHARED_FLAG@,${SHARED_FLAG},g" \
|
|
-e "s,@GCCOPTS@,${GCCOPTS},g" \
|
|
-e "s,@TARGET_INC@,${TARGET_INC},g" \
|
|
-e "s!@LDOPTS@!${LDOPTS}!g" \
|
|
-e "s,@LOADADDRESS@,${loadaddress},g" \
|
|
-e "s,@EXTRADEF@,${extradefines},g" \
|
|
-e "s,@APPSDIR@,${appsdir},g" \
|
|
-e "s,@FIRMDIR@,${firmdir},g" \
|
|
-e "s,@TOOLSDIR@,${toolsdir},g" \
|
|
-e "s,@APPS@,${apps},g" \
|
|
-e "s,@SIMVER@,${simver},g" \
|
|
-e "s,@GCCVER@,${gccver},g" \
|
|
-e "s,@GCCNUM@,${gccnum},g" \
|
|
-e "s,@UNAME@,${uname},g" \
|
|
-e "s,@ENDIAN@,${defendian},g" \
|
|
-e "s,@TOOLSET@,${toolset},g" \
|
|
-e "${simmagic1}" \
|
|
-e "${simmagic2}" \
|
|
-e "s,@MANUALDEV@,${manualdev},g" \
|
|
<<EOF
|
|
## Automaticly generated. http://www.rockbox.org/
|
|
|
|
ifndef V
|
|
SILENT=@
|
|
else
|
|
VERBOSEOPT=-v
|
|
endif
|
|
|
|
# old 'make' versions don't have the built-in 'info' function
|
|
info=old\$(shell echo >&2 "Consider upgrading to GNU make 3.81+ for optimum build performance.")
|
|
ifeq (\$(call info),old)
|
|
export info=echo "\$\$(1)";
|
|
endif
|
|
|
|
export ROOTDIR=@ROOTDIR@
|
|
export FIRMDIR=@FIRMDIR@
|
|
export APPSDIR=@APPSDIR@
|
|
export TOOLSDIR=@TOOLSDIR@
|
|
export DOCSDIR=\$(ROOTDIR)/docs
|
|
export MANUALDIR=\${ROOTDIR}/manual
|
|
export DEBUG=@DEBUG@
|
|
export ARCHOS=@ARCHOS@
|
|
export ARCHOSROM=@ARCHOSROM@
|
|
export FLASHFILE=@FLASHFILE@
|
|
export TARGET_ID=@TARGET_ID@
|
|
export TARGET=@TARGET@
|
|
export OBJDIR=@PWD@
|
|
export BUILDDIR=@PWD@
|
|
export LANGUAGE=@LANGUAGE@
|
|
export MEMORYSIZE=@MEMORY@
|
|
export VERSION=\$(shell date +%y%m%d-%H%M)
|
|
export BUILDDATE=\$(shell date +'-DYEAR=%Y -DMONTH=%m -DDAY=%d')
|
|
export MKFIRMWARE=@TOOL@
|
|
export BMP2RB_MONO=@BMP2RB_MONO@
|
|
export BMP2RB_NATIVE=@BMP2RB_NATIVE@
|
|
export BMP2RB_REMOTEMONO=@BMP2RB_REMOTEMONO@
|
|
export BMP2RB_REMOTENATIVE=@BMP2RB_REMOTENATIVE@
|
|
export BINARY=@OUTPUT@
|
|
export APPEXTRA=@APPEXTRA@
|
|
export ENABLEDPLUGINS=@PLUGINS@
|
|
export SOFTWARECODECS=@CODECS@
|
|
export EXTRA_DEFINES=@EXTRADEF@
|
|
export HOSTCC=gcc
|
|
export CC=@CC@
|
|
export LD=@LD@
|
|
export AR=@AR@
|
|
export AS=@AS@
|
|
export OC=@OC@
|
|
export WINDRES=@WINDRES@
|
|
export DLLTOOL=@DLLTOOL@
|
|
export DLLWRAP=@DLLWRAP@
|
|
export RANLIB=@RANLIB@
|
|
export PROFILE_OPTS=@PROFILE_OPTS@
|
|
export GCCOPTS=@GCCOPTS@
|
|
export TARGET_INC=@TARGET_INC@
|
|
export LOADADDRESS=@LOADADDRESS@
|
|
export SIMVER=@SIMVER@
|
|
export SIMDIR=\$(ROOTDIR)/uisimulator/\$(SIMVER)
|
|
export SHARED_FLAG=@SHARED_FLAG@
|
|
export LDOPTS=@LDOPTS@
|
|
export GCCVER=@GCCVER@
|
|
export GCCNUM=@GCCNUM@
|
|
export UNAME=@UNAME@
|
|
export MANUALDEV=@MANUALDEV@
|
|
|
|
# Do not print "Entering directory ..."
|
|
MAKEFLAGS += --no-print-directory
|
|
|
|
.PHONY: all clean tags zip tools manual
|
|
|
|
all: tools
|
|
@SIMUL1@
|
|
@SIMUL2@
|
|
\$(SILENT)\$(MAKE) -C \$(FIRMDIR) OBJDIR=\$(BUILDDIR)/firmware
|
|
\$(SILENT)\$(MAKE) -C \$(APPSDIR) OBJDIR=\$(BUILDDIR)/@APPS@
|
|
|
|
bin: tools
|
|
@SIMUL1@
|
|
@SIMUL2@
|
|
\$(SILENT)\$(MAKE) -C \$(FIRMDIR) OBJDIR=\$(BUILDDIR)/firmware
|
|
\$(SILENT)\$(MAKE) -C \$(APPSDIR) OBJDIR=\$(BUILDDIR)/@APPS@ \$(BUILDDIR)/\$(BINARY)
|
|
|
|
veryclean: clean toolsclean
|
|
|
|
toolsclean:
|
|
\$(SILENT)\$(MAKE) -C \$(TOOLSDIR) clean
|
|
|
|
clean:
|
|
\$(SILENT)echo Cleaning build directory
|
|
\$(SILENT)rm -rf rockbox.zip TAGS @APPS@ firmware comsim sim lang.[ch]\
|
|
manual *.pdf *.a credits.raw @OUTPUT@ bitmaps pluginbitmaps \
|
|
@ARCHOSROM@ @FLASHFILE@ UI256.bmp rockbox-full.zip \
|
|
html txt rockbox-manual*.zip
|
|
|
|
voice: tools
|
|
\$(TOOLSDIR)/genvoice.sh \$(ROOTDIR) \$(LANGUAGE) \$(ARCHOS) voicesettings.sh
|
|
|
|
tools:
|
|
\$(SILENT)\$(MAKE) -C \$(TOOLSDIR) CC=\$(HOSTCC) @TOOLSET@
|
|
|
|
tags:
|
|
\$(SILENT)rm -f TAGS
|
|
\$(SILENT)\$(MAKE) -C \$(FIRMDIR) tags
|
|
\$(SILENT)\$(MAKE) -C \$(APPSDIR) tags
|
|
\$(SILENT)\$(MAKE) -C \$(APPSDIR)/plugins tags
|
|
\$(SILENT)\$(MAKE) -C \$(APPSDIR)/plugins/lib tags
|
|
|
|
fontzip:
|
|
\$(SILENT)\$(TOOLSDIR)/buildzip.pl \$(VERBOSEOPT) -t \"\$(ARCHOS)\" -r "\$(ROOTDIR)" -f 1 -o rockbox-fonts.zip \$(TARGET) \$(BINARY)
|
|
|
|
zip:
|
|
\$(SILENT)\$(TOOLSDIR)/buildzip.pl \$(VERBOSEOPT) -t \"\$(ARCHOS)\" -r "\$(ROOTDIR)" \$(TARGET) \$(BINARY)
|
|
|
|
mapzip:
|
|
\$(SILENT)find . -name "*.map" | xargs zip rockbox-maps.zip
|
|
|
|
fullzip:
|
|
\$(SILENT)\$(TOOLSDIR)/buildzip.pl \$(VERBOSEOPT) -t \"\$(ARCHOS)\" -r "\$(ROOTDIR)" -f 2 -o rockbox-full.zip \$(TARGET) \$(BINARY)
|
|
|
|
7zip:
|
|
\$(SILENT)\$(TOOLSDIR)/buildzip.pl \$(VERBOSEOPT) -t \"\$(ARCHOS)\" -o "rockbox.7z" -z "7za a" -r "\$(ROOTDIR)" \$(TARGET) \$(BINARY)
|
|
|
|
tar:
|
|
\$(SILENT)rm -f rockbox.tar
|
|
\$(SILENT)\$(TOOLSDIR)/buildzip.pl \$(VERBOSEOPT) -t \"\$(ARCHOS)\" -o "rockbox.tar" -z "tar --no-recursion -uf" -r "\$(ROOTDIR)" \$(TARGET) \$(BINARY)
|
|
|
|
bzip2: tar
|
|
\$(SILENT)bzip2 -f9 rockbox.tar
|
|
|
|
gzip: tar
|
|
\$(SILENT)gzip -f9 rockbox.tar
|
|
|
|
manual: manual-pdf
|
|
manual-pdf:
|
|
\$(SILENT)\$(MAKE) -C \$(MANUALDIR) OBJDIR=\$(BUILDDIR)/manual manual-pdf
|
|
manual-html:
|
|
\$(SILENT)\$(MAKE) -C \$(MANUALDIR) OBJDIR=\$(BUILDDIR)/manual manual-html
|
|
manual-zhtml: manual-zip
|
|
manual-txt:
|
|
\$(SILENT)\$(MAKE) -C \$(MANUALDIR) OBJDIR=\$(BUILDDIR)/manual manual-txt
|
|
manual-ztxt:
|
|
\$(SILENT)\$(MAKE) -C \$(MANUALDIR) OBJDIR=\$(BUILDDIR)/manual manual-txt-zip
|
|
manual-zip:
|
|
\$(SILENT)\$(MAKE) -C \$(MANUALDIR) OBJDIR=\$(BUILDDIR)/manual manual-zip
|
|
|
|
help:
|
|
@echo "A few helpful make targets"
|
|
@echo ""
|
|
@echo "all - builds a full Rockbox (default), including tools"
|
|
@echo "bin - builds only the Rockbox.<target name> file"
|
|
@echo "clean - cleans a build directory (not tools)"
|
|
@echo "veryclean - cleans the build and tools directories"
|
|
@echo "manual - builds a manual"
|
|
@echo "manual-html - HTML manual"
|
|
@echo "manual-zip - HTML manual (zipped)"
|
|
@echo "manual-txt - txt manual"
|
|
@echo "fullzip - creates a rockbox.zip of your build with fonts"
|
|
@echo "zip - creates a rockbox.zip of your build (no fonts)"
|
|
@echo "gzip - creates a rockbox.tar.gz of your build (no fonts)"
|
|
@echo "bzip2 - creates a rockbox.tar.bz2 of your build (no fonts)"
|
|
@echo "7zip - creates a rockbox.7z of your build (no fonts)"
|
|
@echo "fontzip - creates rockbox-fonts.zip"
|
|
@echo "mapzip - creates rockbox-maps.zip with all .map files"
|
|
@echo "tools - builds the tools only"
|
|
@echo "install - installs your build (for simulator builds only)"
|
|
|
|
EOF
|
|
|
|
if [ "yes" = "$simulator" ]; then
|
|
|
|
cat >> Makefile <<EOF
|
|
|
|
install:
|
|
@echo "installing a full setup in your archos dir"
|
|
@(\$(MAKE) fullzip && cd archos && unzip -oq ../rockbox-full.zip)
|
|
EOF
|
|
|
|
fi
|
|
|
|
echo "Created Makefile"
|