forked from len0rd/rockbox
Fork of rockbox tailored for ipod classic
4dc602dd7f
Tested on eros q, everything measured from line out, open circuit. - volume steps were approximately double the dB they were labelled as, so "-2 dB" would result in a change of about -4 dB from maximum (0, +6.2dBV) - maximum volume defining the line out volume only changed every 10 values, and then was not close to correct- "-10 dB" resulted in -2.5 dB from maximum This gets the volume dB approximately correct, and maximum volume correctly sets the line out volume. I was unable to get odd values in the max volume to work, so set the step size to 2 instead of one. For "consumer level" (-10dBV), set to -16. For "Pro level" (+4dBu -> ~1.8dBV), set to -4. Change-Id: I898b85d768153579a893b23551019af88f865d21 |
||
|---|---|---|
| android | ||
| apps | ||
| backdrops | ||
| bootloader | ||
| debian | ||
| docs | ||
| firmware | ||
| fonts | ||
| gdb | ||
| icons | ||
| lib | ||
| manual | ||
| packaging | ||
| rbutil | ||
| tools | ||
| uisimulator | ||
| utils | ||
| wps | ||
| .gitattributes | ||
| .gitignore | ||
__________ __ ___.
Open \______ \ ____ ____ | | _\_ |__ _______ ___
Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
\/ \/ \/ \/ \/
Build Your Own Rockbox
1. Clone 'rockbox' from git (or extract a downloaded archive).
$ git clone git://git.rockbox.org/rockbox
or
$ tar xjf rockbox.tar.bz2
2. Create a build directory, preferably in the same directory as the firmware/
and apps/ directories. This is where all generated files will be written.
$ cd rockbox
$ mkdir build
$ cd build
3. Make sure you have mips/m68k/arm-elf-gcc and siblings in the PATH. Make sure
that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
a particular version depending on what player you are compiling for. These
can be generated using the rockboxdev.sh script in the /tools/ folder of the
source.
$ which arm-elf-eabi-gcc
$ which perl
4. In your build directory, run the 'tools/configure' script and enter what
target you want to build for and if you want a debug version or not (and a
few more questions). It'll prompt you. The debug version is for making a
gdb version out of it. It is only useful if you run gdb towards your target
Archos.
$ ../tools/configure
5. *ploink*. Now you have got a Makefile generated for you.
6. Run 'make' and soon the necessary pieces from the firmware and the apps
directories have been compiled, linked and scrambled for you.
$ make
$ make zip
7. unzip the rockbox.zip on your music player, reboot it and
*smile*.
If you want to build for more than one target, just create several build
directories and create a setup for each target:
$ mkdir build-fuzeplus
$ cd build-fuzeplus
$ ../tools/configure
$ mkdir build-xduoox3
$ cd build-xduoox3
$ ../tools/configure
Questions anyone? Ask on the mailing list or on IRC. We'll be happy to help you!