forked from len0rd/rockbox
153 lines
4 KiB
C
153 lines
4 KiB
C
/*
|
|
* This config file is for HiFiMAN HM-60x reference design
|
|
*/
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 83
|
|
|
|
#define MODEL_NAME "HiFi E.T. MA9"
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_48 | SAMPR_CAP_44 | \
|
|
SAMPR_CAP_32 | SAMPR_CAP_24 | SAMPR_CAP_22 | \
|
|
SAMPR_CAP_16 | SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
|
|
|
|
#define HAVE_DF1704_CODEC
|
|
|
|
#define CODEC_SLAVE
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you can flip your LCD */
|
|
/* #define HAVE_LCD_FLIP */
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
/* #define HAVE_LCD_INVERT */
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
#define CONFIG_STORAGE (STORAGE_SD | STORAGE_NAND)
|
|
|
|
#define CONFIG_NAND NAND_RK27XX
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* commented for now */
|
|
/* #define HAVE_HOTSWAP */
|
|
|
|
#define NUM_DRIVES 2
|
|
#define SECTOR_SIZE 512
|
|
|
|
/* for small(ish) SD cards */
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 320
|
|
#define LCD_HEIGHT 240
|
|
#define LCD_DEPTH 16 /* pseudo 262.144 colors */
|
|
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
|
|
|
/* Define this if your LCD can be enabled/disabled */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
#define CONFIG_KEYPAD MA_PAD
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
#define CONFIG_LCD LCD_ILI9342
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
#define MIN_BRIGHTNESS_SETTING 0
|
|
#define MAX_BRIGHTNESS_SETTING 31
|
|
#define DEFAULT_BRIGHTNESS_SETTING 31
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* TODO: Figure out real values */
|
|
#define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 10 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Hardware controlled charging with monitoring */
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_RK27XX
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
|
|
#define USE_ROCKBOX_USB
|
|
#define USB_VENDOR_ID 0x071b
|
|
#define USB_PRODUCT_ID 0x3202
|
|
#define HAVE_BOOTLOADER_USB_MODE
|
|
|
|
/* Define this if your LCD can set contrast */
|
|
/* #define HAVE_LCD_CONTRAST */
|
|
|
|
/* The exact type of CPU */
|
|
#define CONFIG_CPU RK27XX
|
|
|
|
/* I2C interface */
|
|
#define CONFIG_I2C I2C_RK27XX
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 200000000
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
/* #define HAVE_POWEROFF_WHILE_CHARGING */
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
#define STORAGE_NEEDS_ALIGN
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
/* Virtual LED (icon) */
|
|
#define CONFIG_LED LED_VIRTUAL
|
|
|
|
#define RKW_FORMAT
|
|
#define BOOTFILE_EXT "rkw"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|