forked from len0rd/rockbox
253eb79db3
Support hw4 units with AXP2101 PMU
Bootloader successfully compiles and loads onto device.
The LCD appears to be identical to hw3 units.
Scroll wheel and buttons work
Audio output works, including volume.
HP/LO detect works
Rockbox build is generic
GPIO gating logic seems to be working as intended now.
- Added new GPIO definitions - some significant overlaps with pins
from previous hardware revisions...
- Added some GPIO definitions for older players we didn't know about
- Add register definitions for AXP2101 from datasheet
(these are very different from AXP192!)
- Add AXP2101 regulator definitions, need to support multiple step
sizes per regulator.
- Verify AXP2101 voltage set multi-range logic
- Verify AXP2101 voltage get multi-range logic
- Make AXP2101 its own driver
- AXP2101 driver should be "minimally viable", though I think
there is some extra functionality that could be implemented.
- Disabling the coulomb counter stuff - we could maybe make
the E-Gauge work for the same purpose, but it only appears to
be used on the debug screen at the moment so it doesn't seem
like it's worth the effort.
- Found new button GPIOs
- Found error in my GPIO setting logic, blue light works now!
- Set LDO/DCDC output voltages to OF's settings, as far as
I can tell.
- Determined we probably want TCS1421_CFG1:0 to be 0x00,
for UFP behavior
- Tested this rb build with both old and new bootloaders on hw1.5,
hw2, hw4 in as many configurations as I can think of, works across
the board.
- Bootloader can install itself on hw4, so nand chip isn't novel
- Uninstallation file can be made by patcher script, works on hw4
- Installation file can be made by patcher script, works on hw4
- Added HW4 to rbutil, manual
Change-Id: I5b75782273e81c2c6f2b9c79501c8b7cbf88391f
159 lines
4.3 KiB
C
159 lines
4.3 KiB
C
/*
|
|
* This config file is for the AIGO EROS Q / EROS K (and its clones)
|
|
*/
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NAME "AIGO Eros Q Native"
|
|
#define MODEL_NUMBER 116
|
|
#define BOOTFILE_EXT "erosq"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
/* Define EROSQN_VER as an "extradefine" in the configure script -
|
|
* v1, v2 players: "1"
|
|
* v3 players: "3"
|
|
* Only bootloader will be affected.
|
|
*
|
|
* This allows us to fix the LCD init issues with v3 players.
|
|
*/
|
|
#ifdef BOOTLOADER
|
|
#ifndef EROSQN_VER
|
|
#error "Must define EROSQN_VER"
|
|
#endif
|
|
#endif
|
|
|
|
/* CPU defines */
|
|
#define CONFIG_CPU X1000
|
|
#define X1000_EXCLK_FREQ 24000000
|
|
#define CPU_FREQ 1008000000
|
|
#define HAVE_FPU
|
|
|
|
#ifndef SIMULATOR
|
|
#define TIMER_FREQ X1000_EXCLK_FREQ
|
|
#endif
|
|
|
|
/* kernel defines */
|
|
#define INCLUDE_TIMEOUT_API
|
|
#define HAVE_SEMAPHORE_OBJECTS
|
|
|
|
/* drivers */
|
|
#define HAVE_I2C_ASYNC
|
|
|
|
/* Buffers for plugsins and codecs */
|
|
#define PLUGIN_BUFFER_SIZE 0x200000 /* 2 MiB */
|
|
#define CODEC_SIZE 0x100000 /* 1 MiB */
|
|
|
|
/* LCD defines */
|
|
#define CONFIG_LCD LCD_EROSQ
|
|
#define LCD_WIDTH 320
|
|
#define LCD_HEIGHT 240
|
|
#define LCD_DEPTH 16 /* Future Improvement: 18 or 24 bpp if display supports it */
|
|
#define LCD_PIXELFORMAT RGB565
|
|
/* sqrt(240^2 + 320^2) / 2.0 = 200 */
|
|
#define LCD_DPI 200
|
|
#define HAVE_LCD_COLOR
|
|
#define HAVE_LCD_BITMAP
|
|
#define HAVE_LCD_ENABLE
|
|
#define HAVE_LCD_SHUTDOWN
|
|
#define LCD_X1000_FASTSLEEP
|
|
//#define LCD_X1000_DMA_WAITFORFRAME
|
|
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 255
|
|
#define BRIGHTNESS_STEP 5
|
|
#define DEFAULT_BRIGHTNESS_SETTING 70
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
|
|
|
|
/* RTC settings */
|
|
#define CONFIG_RTC RTC_X1000
|
|
|
|
/* Codec / audio hardware defines */
|
|
#define HW_SAMPR_CAPS SAMPR_CAP_ALL_192
|
|
#define HAVE_EROS_QN_CODEC
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
#define HAVE_SW_VOLUME_CONTROL
|
|
#define AUDIOHW_CAPS (FILTER_ROLL_OFF_CAP)
|
|
#define AUDIOHW_HAVE_SHORT_ROLL_OFF
|
|
|
|
/* use high-bitdepth volume scaling */
|
|
#define PCM_NATIVE_BITDEPTH 24
|
|
|
|
/* Button defines */
|
|
#define CONFIG_KEYPAD EROSQ_PAD
|
|
#define HAVE_SCROLLWHEEL
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
#define HAVE_LINEOUT_DETECTION
|
|
|
|
/* Storage defines */
|
|
#define CONFIG_STORAGE STORAGE_SD
|
|
#define HAVE_HOTSWAP
|
|
#define HAVE_HOTSWAP_STORAGE_AS_MAIN
|
|
#define HAVE_MULTIVOLUME
|
|
#define STORAGE_WANTS_ALIGN
|
|
#define STORAGE_NEEDS_BOUNCE_BUFFER
|
|
|
|
/* Power management */
|
|
#define CONFIG_BATTERY_MEASURE (VOLTAGE_MEASURE/*|CURRENT_MEASURE*/)
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
#ifndef SIMULATOR
|
|
#define HAVE_AXP2101_ADDON
|
|
#define HAVE_AXP_PMU 192
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
#endif
|
|
|
|
/* Battery */
|
|
#define BATTERY_TYPES_COUNT 1
|
|
#define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 1300 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
|
|
|
#define CURRENT_NORMAL 100 // 1.7mA * 60s
|
|
#define CURRENT_BACKLIGHT 180
|
|
#define CURRENT_MAX_CHG 500 // bursts higher if needed
|
|
|
|
/* Multiboot */
|
|
#define HAVE_BOOTDATA
|
|
#define BOOT_REDIR "rockbox_main.aigo_erosqn"
|
|
|
|
/* DeviceData */
|
|
#define HAVE_DEVICEDATA
|
|
|
|
/* USB support */
|
|
#ifndef SIMULATOR
|
|
#define CONFIG_USBOTG USBOTG_DESIGNWARE
|
|
#define USB_DW_TURNAROUND 5
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0xc502
|
|
#define USB_PRODUCT_ID 0x0023
|
|
#define USB_DEVBSS_ATTR __attribute__((aligned(32)))
|
|
#define HAVE_USB_POWER
|
|
#define HAVE_USB_CHARGING_ENABLE
|
|
#define HAVE_USB_CHARGING_IN_THREAD
|
|
#define TARGET_USB_CHARGING_DEFAULT USB_CHARGING_FORCE
|
|
#define HAVE_BOOTLOADER_USB_MODE
|
|
/* This appears to improve transfer performance (the default is 64 KiB).
|
|
* Going any higher doesn't help but we're still slower than the OF. */
|
|
#define USB_READ_BUFFER_SIZE (128 * 1024)
|
|
#define USB_WRITE_BUFFER_SIZE (128 * 1024)
|
|
#endif
|
|
|
|
#ifdef BOOTLOADER
|
|
/* Ignore on any key can cause surprising USB issues in the bootloader */
|
|
# define USBPOWER_BTN_IGNORE (~(BUTTON_PREV|BUTTON_NEXT))
|
|
#endif
|
|
|
|
/* Rockbox capabilities */
|
|
#define HAVE_VOLUME_IN_LIST
|
|
#define HAVE_FAT16SUPPORT
|
|
#define HAVE_ALBUMART
|
|
#define HAVE_BMP_SCALING
|
|
#define HAVE_JPEG
|
|
#define HAVE_TAGCACHE
|
|
#define HAVE_QUICKSCREEN
|
|
#define HAVE_HOTKEY
|
|
#define HAVE_BOOTLOADER_SCREENDUMP
|