Rafaël Carré 3a0c6fb34b as3525v2: use 248MHz PLL (reverse engineered by bertrik) ... - cpufreq is now the same than AMSv1 - audio playback frequency should be more accurate - adjust pclk (24.8MHz on clipv2/clip+, 41.333..MHz on fuzev2) : it is still lower than the AMSv1 which use 62MHz on every model git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26937 a1c6a512-1295-4272-9138-f99709370657		2010-06-18 19:56:29 +00:00
..
arm	as3525v2: use 248MHz PLL (reverse engineered by bertrik)	2010-06-18 19:56:29 +00:00
coldfire	HD200 - use line transfers in lcd_grey_data. This gives ~25% speedup.	2010-06-15 10:41:43 +00:00
hosted/sdl	Switch iPod 3G to use EABI toolchain. Make necessary threading changes to avoid use of stack after switching to idle stack.	2010-06-17 20:15:58 +00:00
mips	Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.	2010-06-06 13:20:47 +00:00
sh	Threading: Split processor support code into respective target files. C files from /target/xxx are included into thread.c because of essential inlining and files are code, not declarations. Copyrights in each new file go to whoever implemented the first functional support.	2010-06-02 12:45:36 +00:00