forked from len0rd/rockbox
Fork of rockbox tailored for ipod classic
291b2338c9
This patch has been tested on iPod 80 and 160slim, actually it works but some updates must be done to the final version: - unlimitted input buffer - decrease CHUNK_SIZE - use non-cached addresses instead of discard d-cache ??? Capture hardware versions: Ver iPod models capture support --- ----------- --------------- 0 80/160fat dock line-in 1 120/160slim dock line-in + jack mic HW version 1 includes an amplifier for the jack plug mic. Capture HW detection only tested on iPod 80 and 160slim. CODEC power: AFAIK, OF powers CS42L55 at VA=2.4V for capture (1.8V for playback) and turns on the ADC charge pump. CODEC datasheet recommmends to disable the charge pump for VA>2.1V. CS42L55 DS, s4.13 (Required Initialization Settings): for VA>2.1V, some adjustments "must" be done using undocummented "control port compensation" registers. OF does not modifies these registers when VA=2.4V. This patch configures capture HW in the same way as OF does. TODO: - ADC full scale voltage depends on VA, perform tests to find clipping levels for VA=1.8V and VA=2.4V Change-Id: I7e20fd3ecaa83b1c58d5c746f5153fe5c3891d75 |
||
|---|---|---|
| android | ||
| apps | ||
| backdrops | ||
| bootloader | ||
| debian | ||
| docs | ||
| firmware | ||
| flash | ||
| fonts | ||
| gdb | ||
| icons | ||
| lib | ||
| manual | ||
| packaging | ||
| rbutil | ||
| tools | ||
| uisimulator | ||
| utils | ||
| wps | ||
| .gitattributes | ||
| .gitignore | ||
__________ __ ___.
Open \______ \ ____ ____ | | _\_ |__ _______ ___
Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
\/ \/ \/ \/ \/
Build Your Own Rockbox
1. Clone 'rockbox' from git (or extract a downloaded archive).
$ git clone git://git.rockbox.org/rockbox
or
$ tar xjf rockbox.tar.bz2
2. Create a build directory, preferably in the same directory as the firmware/
and apps/ directories. This is where all generated files will be written.
$ cd rockbox
$ mkdir build
$ cd build
3. Make sure you have sh/arm/m68k-elf-gcc and siblings in the PATH. Make sure
that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
a particular version depending on what player you are compiling for. These
can be acquired with the rockboxdev.sh script in the /tools/ folder of the
source, or will have been included if you've installed one of the
toolchains or development environments provided at http://www.rockbox.org/
$ which sh-elf-gcc
$ which perl
4. In your build directory, run the 'tools/configure' script and enter what
target you want to build for and if you want a debug version or not (and a
few more questions). It'll prompt you. The debug version is for making a
gdb version out of it. It is only useful if you run gdb towards your target
Archos.
$ ../tools/configure
5. *ploink*. Now you have got a Makefile generated for you.
6. Run 'make' and soon the necessary pieces from the firmware and the apps
directories have been compiled, linked and scrambled for you.
$ make
$ make zip
7. unzip the rockbox.zip on your music player, reboot it and
*smile*.
If you want to build for more than one target, just create several build
directories and create a setup for each target:
$ mkdir build-fmrecorder
$ cd build-fmrecorder
$ ../tools/configure
$ mkdir build-player
$ cd build-player
$ ../tools/configure
Questions anyone? Ask on the mailing list. We'll be happy to help you!