devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity
foxbox/firmware/target/arm/imx233
History
Amaury Pouly 1a083cdacc imx233/fuze+: fix a typo, handle volume differently because of the line1/dac mode difference. 
The headphone volume register value reads differently in Line1 and DAC mode.
Since the volume is not set again when switching between playback and radio,
we need to remember the hp volume and reapply setting when changing the mode.

Change-Id: I8fbd344f78653c19d81a39dd3f680ec6885cb1ec
2012-02-03 20:04:39 +01:00
..
sansa-fuzeplus imx233/fuze+: fix a typo, handle volume differently because of the line1/dac mode difference. 2012-02-03 20:04:39 +01:00
adc-imx233.c imx233: remove virtual 5V channel (value doesn't make sense), fix battery conversion (need to trigger delay) 2011-11-14 21:42:43 +00:00
adc-imx233.h imx233: remove virtual 5V channel (value doesn't make sense), fix battery conversion (need to trigger delay) 2011-11-14 21:42:43 +00:00
app.lds Do some things to make -ffunction-sections work better. 2011-12-17 01:43:32 +00:00
audioin-imx233.c imx233/fuze+: implement audioout functions (init, volume, frequency); add stubs for audioin 2011-10-18 22:06:05 +00:00
audioin-imx233.h imx233: add AUDIOIN registers, cosmetics 2012-01-02 11:10:17 +00:00
audioout-imx233.c imx233/fuze+: fix a typo, handle volume differently because of the line1/dac mode difference. 2012-02-03 20:04:39 +01:00
audioout-imx233.h imx233/fuze+: fix a typo, handle volume differently because of the line1/dac mode difference. 2012-02-03 20:04:39 +01:00
boot.lds Do some things to make -ffunction-sections work better. 2011-12-17 01:43:32 +00:00
clkctrl-imx233.c imx233: fix clkctrl code (some registers don't have a SET/CLR variant) 2012-01-21 20:15:29 +01:00
clkctrl-imx233.h imx233: fix clkctrl code (some registers don't have a SET/CLR variant) 2012-01-21 20:15:29 +01:00
clock-target.h Sansa Fuze+: initial commit (bootloader only, LCD basically working) 2011-05-01 13:02:46 +00:00
crt0.S Switch to SYS mode on arm FS#12322 by me 2011-10-11 16:06:03 +00:00
dcp-imx233.c imx233: implement dcp blitting, simplify code and make it work even in context interrupt by busy waiting 2012-01-27 20:08:33 +01:00
dcp-imx233.h imx233: implement dcp blitting, simplify code and make it work even in context interrupt by busy waiting 2012-01-27 20:08:33 +01:00
debug-imx233.c fuze+: add basi pinctrl debug screen 2012-02-01 15:02:22 +01:00
debug-target.h imx233: move dbg function declaration to system-target.h 2012-01-04 06:37:25 +00:00
dma-imx233.c imx233/fuze+: allow dma info retrieval; wait for end of channel reset before returning; fix typo 2011-10-18 22:03:25 +00:00
dma-imx233.h imx233/fuze+: allow dma info retrieval; wait for end of channel reset before returning; fix typo 2011-10-18 22:03:25 +00:00
i2c-imx233.c imx233/fuze+: correctly reset i2c block 2011-09-13 23:40:16 +00:00
i2c-imx233.h imx233/fuze+: huge rework 2011-07-23 11:45:22 +00:00
kernel-imx233.c imx233: update arbiter to get more debug information, update debug screen accordingly 2012-01-27 20:08:33 +01:00
kernel-imx233.h imx233: update arbiter to get more debug information, update debug screen accordingly 2012-01-27 20:08:33 +01:00
lcdif-imx233.c imx233/fuze+: correctly lcdif block 2011-09-13 23:39:18 +00:00
lcdif-imx233.h imx233: add comment about block reset 2011-12-13 22:48:01 +00:00
lradc-imx233.c imx233: add DCP driver (only memcpy implemented), move channel arbiter to kernel-imx233 2012-01-15 02:29:30 +01:00
lradc-imx233.h imx233: fix prototype and battery conversion setup code 2011-11-14 21:47:59 +00:00
mmc-imx233.c imx233: fix to typo and remove a forgotten panic 2011-12-15 17:07:15 +00:00
pcm-imx233.c imx233: add AUDIOIN registers, cosmetics 2012-01-02 11:10:17 +00:00
pinctrl-imx233.c imx233/fuze+: add pin irq support 2011-07-22 15:45:50 +00:00
pinctrl-imx233.h imx233/fuze+: add pin irq support 2011-07-22 15:45:50 +00:00
power-imx233.c fuze+: use the si4700 internal oscillator and set a pin on power down (seems important) 2012-02-01 17:51:01 +01:00
power-imx233.h imx233/fuze+: set a few recommended power bits by Freescale, remove some uneeded headers, implement audio path selection for playback and radio 2012-02-01 15:02:22 +01:00
powermgmt-imx233.c Rework powermgmt to enable code re-use on appliation and sims. 2012-01-03 23:44:38 +00:00
powermgmt-imx233.h imx233: forgot a file 2011-12-24 19:23:11 +00:00
rtc-imx233.c imx233: forgot a file 2011-12-31 13:50:07 +00:00
rtc-imx233.h imx233/fuze+: implement rtc (time only, alarm still to implement) 2011-12-31 13:35:45 +00:00
sd-imx233.c fuze+: pin B1P30 is volume down key and has no relation with SD 2012-02-01 15:02:22 +01:00
ssp-imx233.c imx233/fuze+: add support for sd card, enable FAT16 support because it's common on sd cards 2011-12-15 17:06:55 +00:00
ssp-imx233.h imx233/fuze+: add support for sd card, enable FAT16 support because it's common on sd cards 2011-12-15 17:06:55 +00:00
system-imx233.c imx233: add DCP driver (only memcpy implemented), move channel arbiter to kernel-imx233 2012-01-15 02:29:30 +01:00
system-target.h imx233/fuze+: set a few recommended power bits by Freescale, remove some uneeded headers, implement audio path selection for playback and radio 2012-02-01 15:02:22 +01:00
timer-imx233.c imx233/fuze+: fix prototype 2011-09-13 23:39:15 +00:00
timrot-imx233.c imx233/fuze+: move to a more generic xtal derived clock enabling function, fix timrot accordingly 2011-10-18 22:00:50 +00:00
timrot-imx233.h imx233/fuze+: implement user time api, implement a stub function, protect timrot against irq 2011-09-06 00:27:38 +00:00
usb-imx233.c imx233/fuze+: set a few recommended power bits by Freescale, remove some uneeded headers, implement audio path selection for playback and radio 2012-02-01 15:02:22 +01:00