use 0, 1, 3 as input endpoints instead of 0, 3, 5 (0, 1, 3, 5 doesn't work)
use a helper to know the number of endpoints (could be hardcoded since we have 3 input and 3 outputs)
previous check was not correct (sizeof(if?a:b))
change endpoint reset/request
set packet size at enumdone interrupt
we don't have isochronous or interrupt endpoints, remove that table
reverse usb_drv_transfer direction argument (in -> out)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31251 a1c6a512-1295-4272-9138-f99709370657
usb_drv_request_endpoint() would return an endpoint with the other direction
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31248 a1c6a512-1295-4272-9138-f99709370657
DIEPINT_timeout and DOEPINT_setup are the same bit
Use separate cases so the code is more clear
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31242 a1c6a512-1295-4272-9138-f99709370657
Merge clipv1/clipv2 code since they use the same 3x3 matrix
clipzip keyscan buttons now work in bootloader
clipplus untouched (no matrix)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31235 a1c6a512-1295-4272-9138-f99709370657
fuze+: reset the controller for all lcd types, should fix the "CRT effet"
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31234 a1c6a512-1295-4272-9138-f99709370657
code, especially init sequence, is much more similar to usb-s3c6400x.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31231 a1c6a512-1295-4272-9138-f99709370657
This will help debugging, and can be disabled for releases if needed
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31226 a1c6a512-1295-4272-9138-f99709370657
Use common defines in usb-s3c6400.c and usb-drv-as3525v2.c
No functional changes
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31220 a1c6a512-1295-4272-9138-f99709370657
current gcc/binutils don't support weak attribute correctly
see http://sourceware.org/bugzilla/show_bug.cgi?id=9687
fix FS#12427
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31193 a1c6a512-1295-4272-9138-f99709370657
Shamelessly stolen from pcm-android.c
Thanks to Michael Sevakis for pointing out
that pcm_play_lock() is actually needed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31190 a1c6a512-1295-4272-9138-f99709370657
- ata.h is for users of ata.c
- ata-driver.h is for functions implemented by target-specific code and used by ata.c
- ata-target.h is for target-specific defines
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31182 a1c6a512-1295-4272-9138-f99709370657
Fix problems with volume of recorded material by converting 14-bit samples to
16-bit. Remove duplicate samples from recorded data and support proper
samplerate since ADC runs 1/2 the codec clock. Support monitoring mono on both
output channels by feeding data manually to I2SOUT under the right conditions.
DMA is no longer used for recording since frames must be processed as described
above but it does allow full-duplex audio.
Miscellaneous change includes a proper constant (HW_SAMPR_DEFAULT) to reset the
hardware samplerate when recording is closed. PP5024 and AS3525 have different
default recording rates (22kHz and 44kHz respectively) but both have half-speed
ADC.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31180 a1c6a512-1295-4272-9138-f99709370657
Don't build str(n)casecmp as functions if they are already defined by preprocessor
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31147 a1c6a512-1295-4272-9138-f99709370657
