Andree Buschmann
|
2364bc213c
|
Save a few registers in assembler routines for iPod 5Gs LCD driver and YUV conversion.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16840 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-27 07:46:04 +00:00 |
|
Barry Wardell
|
b35d45db02
|
Make H10 bootloader successfully boot the OF again.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16837 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-27 00:50:50 +00:00 |
|
Dave Chapman
|
52655751fa
|
Fix red - adc.h used to be in lcd-remote.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16835 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-27 00:09:31 +00:00 |
|
Jens Arnold
|
06ec18d93f
|
Slightly better instruction order, added comment.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16833 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-26 23:45:55 +00:00 |
|
Jens Arnold
|
91a564e4b9
|
Iriver H1x0/H300: Speed up remote LCD updates when boosted by implementing an idea from the iaudio remote LCD driver. Speedup is ~75 with ticking reduction disabled. Ticking reduction should also be more effective due to the better pulse/pause ratio (update speed with ticking reduction aims at a constant 60fps as before). * SLight speedup when not boosted due to simplifications.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16832 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-26 23:40:17 +00:00 |
|
Barry Wardell
|
c724974872
|
Make the e200 bootloader able to load the OF again.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16817 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-26 10:37:17 +00:00 |
|
Michael Sevakis
|
af395f4db6
|
Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16811 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-26 01:50:41 +00:00 |
|
Jens Arnold
|
74d678fdbc
|
Back-ported the iAudio remote LCD driver optimisations to X5 and M5.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16810 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-26 00:38:40 +00:00 |
|
Jens Arnold
|
40919d7db2
|
iAudio M3: Optimised LCD driver, with more/better assembly code. Speedup is ~80% when boosted, ~15% when unboosted. Also implemented grey phase blitting. * Adapted the greyscale library, and the plugins using it. * Fixed a bug in greyscale scroll down for vertically packed pixels.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16809 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-25 23:21:36 +00:00 |
|
Jens Arnold
|
1f4bcc86da
|
Revert accidental tree commit. /me needs a smaller enter key...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16805 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-25 19:57:23 +00:00 |
|
Jens Arnold
|
9a7978aeab
|
Cabbiev2 gigabeat background: reduce WPS backdrop filesize by storing it as 24 bit BMP instead of unnecessary 32 bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16802 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-25 19:43:08 +00:00 |
|
Michael Sevakis
|
27cf677339
|
Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16791 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-25 02:34:12 +00:00 |
|
Jens Arnold
|
68a21689ae
|
Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16775 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-24 00:35:53 +00:00 |
|
Rob Purchase
|
b8b03370e4
|
D2: Implement LCD driver framebuffer as per E200/Gigabeat F. Kill a few warnings.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16763 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-23 19:56:11 +00:00 |
|
Rob Purchase
|
4dc2d8ddba
|
Enable tick IRQs on TCC780x. The main menu is now working on the D2.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16749 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-22 19:41:51 +00:00 |
|
Rob Purchase
|
f061ba4ebb
|
D2: Implement HAS_BUTTON_HOLD.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16748 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-22 15:55:19 +00:00 |
|
Rob Purchase
|
58b5ce2275
|
D2: Fix inverted USB detection.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16746 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-22 14:51:09 +00:00 |
|
Michael Sevakis
|
f65cf301fb
|
Modification to scale_suspend_core to prevent a potential permanent freezing of the other core. Just unfreeze it unconditionally after freezing it since it really makes no difference to do so right now. Don't bother with freezing/unfreezing if compiling as single.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16731 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-21 17:20:57 +00:00 |
|
Frank Gevaerts
|
bb026334c0
|
Mostly revert r16723, since it causes problems on ipod (i.e. it doesn't seem to detect a connection anymore)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16727 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-21 00:04:17 +00:00 |
|
Frank Gevaerts
|
ea5903dbf1
|
move boosting for usb around a bit, so the cpu is boosted for the entire duration of actual use of storage. On some setups just boosting for the actual transfers doesn't seem to work
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16726 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-20 22:05:11 +00:00 |
|
Frank Gevaerts
|
a6108b9097
|
differentiate between connected and powered in usb_detect()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16723 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-20 20:01:28 +00:00 |
|
Michael Sevakis
|
ed8445f205
|
Change files to use the public function sleep() and not the intenal kernel function sleep_thread().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16719 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-20 15:20:06 +00:00 |
|
Andree Buschmann
|
178df1cfcf
|
Correct DEV_TIMING for CPUFREQ_DEFAULT. Was changed by fault in former power management commit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16716 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-19 13:10:02 +00:00 |
|
Jens Arnold
|
8e66491ffe
|
M3: Make remote LCD hotplug work, and make 'backlight on button hold' use the correct hold switch. * Kill a warning.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16711 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-19 00:34:56 +00:00 |
|
Jens Arnold
|
eb0a7a3318
|
Correct the name of a flag. No functional change.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16708 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-18 22:48:26 +00:00 |
|
Jens Arnold
|
6d8b827472
|
Commit the ADC changes (fix red M3 builds).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16691 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-18 06:55:59 +00:00 |
|
Jens Arnold
|
d700970f86
|
Cosmetic fixes for the iAudio bootloader: Don't display 'Hold switch on' if the reason for getting there was a spurious ON event. Don't disable the multi-colour LED in the M3 bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16690 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-18 00:17:21 +00:00 |
|
Jens Arnold
|
ed3ff1b0b5
|
Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16689 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-17 23:47:38 +00:00 |
|
Jens Arnold
|
c6b6bad18f
|
iAudio M3: ADC driver, making buttons and battery voltage reading work. * Disable the multi-colour LED for now to save power. Proper handling will be added later. * Make reboot on button press work on iAudio X5, M5, M3 in panicf(), and on M3 in UIE().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16684 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-17 00:19:23 +00:00 |
|
Jens Arnold
|
478ba0afa1
|
Add two missing coldfire interrupt vectors.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16681 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-16 00:50:46 +00:00 |
|
Jens Arnold
|
3005cf5c86
|
Sound on M3. yay!
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16679 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-15 21:55:14 +00:00 |
|
Jens Arnold
|
30f8326a8c
|
iAudio M3: Fix standard remote context. * Process button adc values in the button driver. Those buttons won't work without the not-yet-committable ADC driver though.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16676 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-15 12:20:59 +00:00 |
|
Jens Arnold
|
3894a44202
|
More iAudio M3 work. Target build compiles, but same problem regarding plugins as the simulator. Boots to the menu, but it can't be used yet because only main & remote Play button work. USB works.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16661 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-14 08:59:51 +00:00 |
|
Jens Arnold
|
8a6291dd63
|
More iAudio M3 work. Target build compiles, but same problem regarding plugins as the simulator. Boots to the menu, but it can't be used yet because only main & remote Play button work. USB works.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16660 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-14 08:54:54 +00:00 |
|
Frank Gevaerts
|
7fcd26e479
|
Only boost the CPU for large transactions. It would be nice to get rid of boosting for USB altogehter, but it doesn't seem to work then.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16656 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-13 19:56:52 +00:00 |
|
Jens Arnold
|
3c561f2cf9
|
Make the LCD remote work in the Iriver H1x0 and H300 bootloaders as well (untested). * Only try the initial remote LCD init if the remote is plugged, and do it in main builds as well, giving slightly earlier remote LCD output when booting. * Fix delays in the X5/M5 remote LCD init. * Remove an unnecessary check in the X5/M5 remote LCD driver and the M3 LCD driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16655 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-13 19:36:58 +00:00 |
|
Robert Kukla
|
c865a9b41d
|
m:robe 100 - correct headphone detection
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16653 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-13 17:27:14 +00:00 |
|
Karl Kurbjun
|
ef62d6891a
|
Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16651 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-13 03:48:23 +00:00 |
|
Jens Arnold
|
2b5f9aec64
|
Make ATA work on M3.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16650 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-12 23:36:05 +00:00 |
|
Jens Arnold
|
17bc340f1f
|
Make the LCD remote work in the iAudio M3, M5 and X5 bootloaders. * Fix viewport related init bug in the 2 bit vertically interleaved LCD driver. * Fix low bat warning in iaudio bootloader - voltages are in millivolts now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16648 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-12 23:08:33 +00:00 |
|
Jens Arnold
|
769fcbd4d9
|
More iAudio M3 work. Bootloader compiles, but doesn't work yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-12 20:35:42 +00:00 |
|
Michael Sevakis
|
f5921cface
|
Really stop red. Whatever works atm.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16639 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-12 11:59:10 +00:00 |
|
Michael Sevakis
|
e37044ff1d
|
Hotswap code shuffling: Fix yellow. Simplify some target function access. Keep fat lock access from compiling for Ondios - think of a nicer way later.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16637 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-12 11:08:41 +00:00 |
|
Michael Sevakis
|
06a5299aff
|
Do some crackdown on kernel object reinitialization after they could be in use and use before initialization. For c200/e200: Be sure fat cache and ata locks are acquired in the proper order during hot swapping. Delay hotswap monitoring until after initial file mounting (address 2nd kobj concern + possible call of fat driver before init).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16636 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-12 10:03:52 +00:00 |
|
Michael Sevakis
|
2f5a37de5c
|
Fix newly introduced race condition in SD driver. Make sure to force remount in case two SYS_HOTSWAP_INSERTED messages are received in a row. Be sure flags are reset to re-initialize the SD-card. Go back to locking out driver access during disk mount/unmount attempts.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16635 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-12 02:50:07 +00:00 |
|
Robert Kukla
|
6a6c820f5f
|
m:robe 100 - remove ugly workaround for false initial voltage readings and wait until readings have settled instead
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16626 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-11 09:38:12 +00:00 |
|
Rob Purchase
|
9603e4e92f
|
D2: Fix IRAM usage, but disable it for now as Tremor does not fit ('make zip' works now). Fix duplicate CONFIG_LCD value.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16623 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-10 21:39:04 +00:00 |
|
Jens Arnold
|
ed8402ca5e
|
Sansa SD card driver: Simplify hotswap handling, and make it send the insert/remove events while filesystem access is blocked. Also use atomic GPIO bit manipulation where possible, and protect the interrupt level manipulation in the ISR from interrupts arriving at the same time.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16592 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-09 14:49:10 +00:00 |
|
Jens Arnold
|
8c6920e343
|
Revert accidental tree commit. Sorry for that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16574 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-08 23:50:55 +00:00 |
|
Jens Arnold
|
d1ed7c37b1
|
No need to have \n here. panicf() won't output it anyway.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16570 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-08 23:34:43 +00:00 |
|