The JZ misc allows to enable and test SRAM.
The XBurst code uses the coprocessor interface to analyse the cpu. It also
provides a test platform for various features like EBASE and exceptions.
I was able to test and confirm that on jz4760b (thus xburst), EBASE works
(but top 2 bits are not controllable and always 01). The processor claims
to support vector interrupts but this is untested. The values in ConfigX
are not to be trusted blindly, clearly some are wrong. I tried to use the
JZ4780 Config7 "ebase gate" to change bit 30 of EBASE but it does not work,
which suggests that JZ480 uses a newer version of XBurst. Detailled log below:
> ./hwstub_shell -q -f lua/xburst.lua -e "XBURST.init()"
[...]
XBurst:
PRId: 0x2ed0024f
CPU: JZ4760(B)
Config: 0x80000483
Architecture Type: MIPS32
Architecture Level: Release 2 (or more)
MMU Type: Standard TLB
Config1: 0x3e63318a
MMU Size: 32
ICache
Sets per way: 128
Ways: 4
Line size: 32
DCache
Sets per way: 128
Ways: 4
Line size: 32
FPU: no
Config2: 0x80000000
Config3: 0x20
Vectored interrupt: yes
Config7: 0x0
> ./hwstub_shell -q -e 'require("jz/misc"); JZ.misc.enable_sram()' \
-f lua/xburst.lua -e "XBURST.test_ebase(0x80000000);XBURST.test_ebase(0xb32d0000)
[...]
Testing EBASE...
Disable BEV
SR value: 0x2000fc00
EBASE value: 0x80000000
Value after writing 0x80000000: 0x80000000
Value after writing 0x80040000: 0x80040000
Test result: EBase seems to work
Disable config7 gate: write 0x0 to Config7
Value after writing 0xfffff000: 0xbffff000
Enable config7 gate: write 0x80 to Config7
Value after writing 0xc0000000: 0x80000000
Config7 result: Config7 gate does not work
Exception test with EBASE at 0x80000000...
Writing instructions to memory
Old SR: 0x2000fc00
New SR: 0xfc00
EBASE: 80000000
Before: cafebabe
After: deadbeef
Exception result: Exception and EBASE are working
Testing EBASE...
Disable BEV
SR value: 0x2000fc00
EBASE value: 0x80000000
Value after writing 0x80000000: 0x80000000
Value after writing 0x80040000: 0x80040000
Test result: EBase seems to work
Disable config7 gate: write 0x0 to Config7
Value after writing 0xfffff000: 0xbffff000
Enable config7 gate: write 0x80 to Config7
Value after writing 0xc0000000: 0x80000000
Config7 result: Config7 gate does not work
Exception test with EBASE at 0xb32d0000...
Writing instructions to memory
Old SR: 0x2000fc00
New SR: 0xfc00
EBASE: b32d0000
Before: cafebabe
After: deadbeef
Exception result: Exception and EBASE are working
Change-Id: I894227981a141a8c14419b36ed9f519baf145ad1
These macros are like jz_setf but instead of writing fields, they write a
raw value directly: jz_set(REG, value) and jz_clr(REG, value).
Change-Id: I660f20dd691b26d367533877875fc3226a26c992
Apparently I completely forgot to implement it so using hwstub over net would
just fail all EXEC commands :-s
Change-Id: I0d0506cbbce9b86c9a4f19036dacc922d1e51338
This is needed on the jz4760b because if some data is loaded to DRAM, then it
is cached and a disaster lurks if dcaches/icache are not flushed. Targets that
needs this must define CONFIG_FLUSH_CACHES in target-config.h and implement
target_flush_caches(). Currently MIPS has some generic code for mips32r1 that
requires to define {D,I}CACHE_SIZE and {D,I}CACHE_LINE_SIZE in target-config.h
Change-Id: I5a3fc085de9445d8c8a2eb61ae4e2dc9bb6b4e8e
The stub is quite versatile: it can be loaded using bootrom or another other
means (like factory boot on Fiio X1). It relocates itself to TCSM0 and provides
basic functionality (it does not recover from failed read/writes at the moment).
Change-Id: Ib646a4b43fba9358d6f93f0f73a5c2e9bcd775a7
The jz code can do several useful things like dumping the IPL and SPL.
The Fiio code can play with backlight and has code do dump the IPL
and SPL with the correct parameters (extracted by reverse engineering).
Change-Id: I317b3174f5db8d38c9a56670c1d45565142ec208
This is a register description file for the JZ4760B. There are several
details worth noticing:
- it was obtained by gathering information from several sources/headers, but
since there are inconsistencies between them about the exact differences
between JZ4760 and JZ4760B, this file probably contains some errors
- the register names are not the same as the manual ones (which are not the
same as the one in the headers anyway): I dropped the "R" suffix on most
registers because it's redundant
- Ingenic likes to have read-only registers and then set/clr registers, with
very confusing names like DIR/DIRS/DIRC: in the file, the set/clr registers
are described as set/clr variants of the original register
- Parts of the description were obtained programmatically, which explains why
there are empty nodes or partially undocumented registers
Change-Id: I8da1d61e172e932e1a4a58ac0a5008f02b1751be
The code was not updated when I added support for list and other stuff, and thus
it did not properly sort by addresses.
Change-Id: Iaed0717b607beedfb2856c020c2a760e7a5667c5
The current implementation was custom and super slow. Since we use Crypto++
anyway, we might as well get use a good implementation.
Change-Id: I761ad7401653471e54000e1c2bc3d9882378112f
Instead of having our own copy of the AES code, use a good library to do that.
Crypto++ is well-maintained, supports a lot of ciphers, works on many OSes, and
is optimized for many architectures.
Change-Id: I7d7d24b47993206d7338c5f9bac8bbdd3915a667
It was a mess, a mix of crypto_* and cbc_mac calls. I made everything call crypto
functions, and also separate key setup from cryptographic operations, this will
be useful to speed up the code in the upcoming commits. Drop support for "usbotp"
key, since the crypto code for that was never mainlined and we can always get the
keys from a device as long as we have code execution (using the DCP debug registers).
Change-Id: I7aa24d12207ffb744225d1b9cc7cb1dc7281dd22
The overriding of the IV and real key should be the exception, there is no
need to manually set them to false.
Change-Id: Id66754f20a79aa5c1a991839345d1242e0aa587d
The old code had some annoying way of dealing with padding by adding explicit
instructions to the stream, which is 1) ugly 2) not in par with freescale
tools. The trick, which this new version implements, is to put the useful length
of the section in the section header, and the actual (with padding) length in
the boot tag. This way the tools can just ignore padding instruction by
reading the section header, and the bootloader can still load the image because
it uses the boot tags.
Also correctly handle the case where the first section does not start right
after the header (there is a bug in freescale tools for this case by the way).
There is an ambiguity in the way the padding instructions should be encrypted:
the bootloader should logically treat them as regular instruction of the section
stream, but it appears the freescale tools do not generate them as part of the
stream and instead encrypt them like boot tags, which is stupid because there
is no way the bootloader could decrypt them, and anyway we don't care because
the bootloader doesn't decrypt them at all.
Change-Id: Iabdc1d1f9f82d374779bf03efb75c2c3998f5b5d
The cool now takes the database as a hint and will not complain if the device
returns less data. The tool also supports user provided size and raw node numbers
that are not in the database (advanced usage).
Change-Id: I8cec536718d7eff01c7803bea648d6122b82377a
We don't know the encryption method, the KAS is completely different but it
might be useful to record it anyway for future purposes. MID extracted from
device, Japanese NW-A35.
Change-Id: I4c4bb5b063da99003b5c316061d8c490b77428a4
It is Android based and despite the fact that Sony wrote an NVP driver for it,
experiments suggest it is unused because it returns ff all the time...
Change-Id: I37750b659e341b21bed5ebaccf60f9f5fe569f64
Don't use colors since the terminal doesn't support it. Also packing is broken
on MinGW so use #pragma pack when compiling for windows, this is also supported
by MSCV.
Change-Id: I635649d52ed5f2e0af46cb9ca2ec325955b2ddb2
Split the ugly firmware read/write into a API function and a much simplified code.
Also the code can now report progress.
Change-Id: I3f998eaf0c067c6da42b1d2dd9c5a5bf43c6915d
Sanitize the whole library by hiding most of the horrible details of the
implementation. This means that all logical/drive/table attributes are exported
in structures that are internally filled by higher-level API functions. This makes
the code much more readable and prepares for a split between scsitool and the stmp
scsi library.
Change-Id: Id85d450b25cf99cd7c0896c6fc35bcd00babe9e1
Several tools need to perform raw SCSI commands, and we need to support Linux,
Windows and Mac OS, without pulling tons of dependencies to build it easily.
This very simple library has no dependency and supports Linux.
TODO:
- windows
- mac os
Change-Id: I496f5ad2490bd3e96ad962d31cce4e511a523c3a
