Most SoCs are these days are fast enough for realtime BRR, gaussian
interpolation and echo processing.
Change-Id: I180ce8ad45242c67b5e573a406b9522098a3f12b
Affected BRR cached waveforms but not realtime BRR decode as far as
I could ascertain. BRR cached waves required loop points to be inside
the initial waveform but this change removes that restriction.
Change-Id: I0ef4db720e5c28bd7b2fb9ae255d27c0a7213f79
CPU optimization gets its own files in which to fill-in optimizable
routines.
Some pointless #if 0's for profiling need removal. Those macros are
empty if not profiling.
Force some functions that are undesirable to be force-inlined by the
compiler to be not inlined.
Change-Id: Ia7b7e45380d7efb20c9b1a4d52e05db3ef6bbaab
Use the tlsf malloc and friends instead of the silly
codec_malloc to get actually working free and saner
realloc that doesn't leak memory.
Makes files with moderately sized embedded AA play
on targets with large enough codec buffers and files
with too large AA are now skipped rather than crashing.
Fixes crash when playing example file in FS#12842.
Change-Id: I06562955c4d9a95bd90f55738214fba462092b71
DSP_SWITCH_FREQUENCY has been deprecated and the same enumerated value
as DSP_SET_FREQUENCY since major DSP revisions were committed. This
task should have been performed much earlier but, oh well, do it now.
Change-Id: I3f30d651b894136a07c7e17f78fc16a7d98631ff
Will need it soon enough.
Combine the contents of all the various fixedpoint.h files.
Not moving fixedpoint.c for now since I'm not sure where it
should be and it causes some dependency issues.
Change-Id: Ideacbca2ca78f9158c2b114b113c274f68e908d5
Prevents cutoff of tracks, especially short ones:
* Extend looped tracks by fade length to fade at start of loop repeat.
* No fade occurs for non-repeating track only having an intro.
* Uses id3.tail_trim field to store fade duration.
Use libGME built-in elapsed time reporting instead of custom calculation:
* libGME already reports in milliseconds.
* Don't advance time counter when Repeat == One. It just runs the progress
over the length limit.
Fix a comment about sample rate and set the reported bitrate to be
accurate for 44.1 kHz stereo.
Change-Id: I3ede22bda0f9a941a3fef751f4d678eb0027344c
Flush decoder state and frame out buffer upon a forced stop to prevent
a short burst of stale audio from the previously decoding track from
playing when skipping from one WMA track to another.
Change-Id: I24c910c5dbd83caed2510db68d9e39a474332a79
Reviewed-on: http://gerrit.rockbox.org/406
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Speeds up decoding of 128k opus files by 1.2MHz on AMSv2. Rounding
error is 1 bit due to KissFFT using a 15 bit shift instead of a 16 bit shift.
Also, change an LDMIA in the armv4 code to LDM as the pointer should not
increment.
Change-Id: I626a207c6a056a1984e33cfe89415c35d0caed93
Reviewed-on: http://gerrit.rockbox.org/377
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Tested-by: Michael Giacomelli <giac2000@hotmail.com>
I'm not 100% sure that the rounding of denormals is correct. As compared to foobar2000,
some samples are off by +1 LSB. However, since I can't output 24 bit PCM easily with
rockbox, I'm not sure if this is due to a bug or just how rockbox rounds. In practice
I don't think it matters so I'm just going to commit this for now.
Change-Id: Ic0792fcb172e4369a5512d202121c2b918b36079
avoids complicated index calculations in the loops.
saves 0.3MHz decoding a 64kbps test file on h300 (cf) and
0.2MHz on c200 (pp)
Change-Id: I1918912d9a4502f89980c6bb270ec2ef10a07010
Signed-off-by: Nils Wallménius <nils@rockbox.org>
on a target with a disk.
Change-Id: I37c875c9cd014eb61fe5232dab0f4b8f15f057dd
Reviewed-on: http://gerrit.rockbox.org/319
Tested-by: Thiago Okada <thiago.mast3r@gmail.com>
Reviewed-by: Frederik Vestre <freqmod@gmail.com>
Tested-by: Frederik Vestre <freqmod@gmail.com>
speeds up decoding of a 64kbps test_file by 1.5MHz on c200 (pp)
and 1.9MHz on fuzev1 (amsv1)
Change-Id: I1db460b634eba608c3e00541d96fc93d5a05710b
Signed-off-by: Nils Wallménius <nils@rockbox.org>
speeds up decoding of a 64kbps test file by 0.5Hz on h300 (cf)
0.9MHz on c200 (pp) and 0.2MHz on fuzev1 (amsv1)
Change-Id: Ib537c2393fa6dca0b61e4e9f80eef5e688c2c2bd
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Unroll overlap add loop by four and use memcpy for copying
instead of loops.
Change-Id: I17114626a395d5972130251d892f851bc86e3a6a
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Replace complicated macro doing three 16*16 muls and add an inline
asm implementation for arm, speeds up decoding a 64kbps test file
by 0.5MHz on c200 (pp) and gives slightly better precision.
Change-Id: I6fc5b83c210f01bffdc38aec54cc5a8b646d8169
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Hoist load of coefficients out of the loop.
Speeds up decoding of a 64kbps test file by 0.6MHz on h300 (cf)
0.2MHz on c200 (pp) and 0.1MHz on fuzev1 (amsv1)
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Change-Id: I4be0059fc2a77748575f5fc9378f7f348d64f1c4
Skip expensive multiply-accumulate loop when gains are 0 and
just copy using memcpy if soure and destination are not the same
Speeds up decoding of a 64kbps test file by 6MHz on h300 (cf)
7MHz on c200 (pp) and 6MHz on fuzev1 (amsv1)
Change-Id: Ibbc9ddfd45a9ac661467b1327b8c67761924fb8b
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Reorder operands to take advantage of the early termination of
multiplications. Saves 2.5MHz decoding a 64kbps opus test file
on c200 (pp).
Change-Id: I470266dc870ab183ece3b23426d41e2a64342a71
Speeds up decoding of 64kbps test file by 6.3MHz on h300 (cf)
and 1.2MHz on c200 (pp).
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Change-Id: I08c2c332153abcbef9447c81986777fd2fcc73fe
speeds up decoding of 64kbps test file by 19MHz on h300 (cf)
and 2.5MHz on c200 (pp)
Change-Id: Idacd2f8962c20c518055d586daeec6b932b7ded2
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Speeds up decoding of a 64kbps test file 26MHz on H300 (cf) and
2MHz on c200 (pp)
Change-Id: I2fb4fe6c0a29321087e02fbd17fd1b1eb84e7b57
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Remove downsampling code from deemphasis loop as we don't use
it and remove multiplications that are not relevant when
not using custom modes. Saves 1.4MHz on h300 (cf), 4.3MHz on
c200 (pp) and 4.6 on fuzev1 (amsv1).
Change-Id: Iab3f1d737a656a563aaa351d50db987a9cff2287
Saves about 30MHz on h300 (cf) and 1.5MHz on c200 (pp) decoding a
64kbps test file. Stack usage is still below 70%.
Change-Id: Ib13df9011adb4eef4bb91a52e5a32741c8bf8988
Speeds up decoding of a 64kbps opus test file by 34MHz on h300 (cf),
24MHz on c200 (pp) and 13MHz on fuzev1 (amsv1)
Change-Id: I0dce6b3bfe6c81d0a722dfebb13891b9a428c6ba
Synchronised with opus repo on github (https://github.com/freqmod/rockbox-opus)
Status:
* Seeking ported from speex, but fails on some cases (e.g. seek to granule 0)
* ReplayGain parsing needs to be reworked, we do vorbis-style replaygain now.
http://wiki.xiph.org/OggOpus#Comment_Header explicitly forbids these in
favour of R128_TRACK_GAIN tag.
* No optimisation yet, source files still nearly identical to opus upstream
* Multi-stream opus files may not be parsed correctly
Change-Id: Ia66f1027dc1d288083e3c57b2816700078376f9a
Reviewed-on: http://gerrit.rockbox.org/300
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Tested-by: Bertrik Sikken <bertrik@sikken.nl>
