bootloader passes the player version to rockbox for LCD init changes
Credit ZappBranigan2972 on forums for original changes
Credit Bilgus for devicedata additions
Change-Id: Ia2ca493edef49b7457e84dc19b05397dc915fa5a
* Create new 'sector_t' type alias:
* uint64_t for all targets with HAVE_LBA48 or HAVE_SDUC
* unsigned long for the everything else
* Alter all storage APIs to use sector_t instead of 'unsigned long'
* Alter Volume/Partition/storage info structures to use sector_t
* Disk cache converted to sector_t
* ATA Core:
* convert to using sector_t for sector addresses and drive sizes
* Always fill out upper 16 bits of LBA48 addresses
* IDENTIFY INFO is fixed at 512 bytes, not SECTOR_SIZE
* USB mass storage:
* convert to using sector_t for sector addesses and drive sizes
* Implement READ_16/WRITE_16 for LBA48 addresses
* Convert FAT code to use sector_t for all sector references
* output_dyn_value() now accepts int64_t instead of 'int'
* Corrected "rockbox info" to work for (MULTIVOLUME & !MULTIDRIVE)
* Better reporting of disk and (logical+physical) sector sizes in debug info
* Detect SDUC cards and report on storage debug_info screen
To-do: SDUC
* Refactor SD core to remove duplicate code in every driver
* Card probe and init state machine
* Implement core SDUC support
* SD2.0 needs to be 2.0+ (fixed for jz47xx and x1000)
* Host and Card ID (ACMD41)
* 32-bit addressing for all read/write/erase operations (CMD22)
* ADD SDUC to target device drivers, defining HAVE_SDUC as appropriate
Change-Id: Ib0138781a0081664d11511037685503df1b93608
the define for HOME_DIR has a single slash for native
hosted does or doesn't but native always has 2
Change-Id: I2ff546da8e422feb04027de164caf3747f6d9355
(It would be interesting to try and work around this but it would have to
be done on a per-target/platform basis)
Change-Id: I7a27199082998420fea3c6abbbf5f3c526ccaec4
* If CF Timing mode is specified, treat it as SSD
(some SD adapters don't report CFA supported but but report this,
and _all_ microdrives seen do not report this)
* If CFA compliant and CF power level 0, treat as SSD
Change-Id: Ia8c88b4636af9bae75fbd1c253d8b2b01bca6584
* hostfs_removeable()/present() needed IF_MDVOID() in their prototypes
* SIM_EXT_INSERTED/EXTRACTED are gated by HAVE_HOTSWAP
Change-Id: Id8c688f3538db99586a4f5062c83466374451883
* xDuoo X3 fix some warnings due to an incorrect #ifdef
* stub storage_removeable() and storage_present() for non-HOTSWAP builds
* sim_trigger_external() is gated by HOTSWAP, not MULTIDRIVE
Change-Id: I38f14fdfeba13957899c378051d49afc2e8245e5
Multivolume support is only necessary if mounting multiple volumes
simultaneously, which the bootloader won't do.
Change-Id: I725061dd2aa47abe7652b0d27258dd3af821c913
Notably:
* double-paste in ihifi760 config.h
* jz4740 ATA & SD drivers used MULTIVOLUME instead of MULTIDRIVE
* Simulators implicitly rely on HAVE_HOTSWAP
Change-Id: I44fc7f98f0f6df366f016567c330f87e9f3ca6a6
* HAVE_MULTIDRIVE implies HAVE_MULTIVOLUME as the latter is always
removeable storage
* SD storage implies MULTIVOLUME
* ATA storage (with HAVE_LBA48) implies MULTIVOLUME
* Replace HAVE_MULTIDRIVE && NUM_DRIVES == 1 with HAVE_MULTIVOLUME
Since SD and ATA can exceed 2TB, we need multiple volumes to fully
utilize available storage with FAT32.
In practice I believe this only affects the ipod devices.
Change-Id: Ia597770948b0e2b47630f7264ad34f225a33a640
Status:
- tested on:
Samsung YH920 - it uses this detection too, it always should have
the radio.
Samsung YH925 with the radio.
- untested on:
Samsung YH925 without the radio.
Change-Id: I68b39c09d6b7e26a4c373fbd8bf9401a97e86123
This should actually be strip_extra_leading_separators() but
its not used anywhere else yet and I don't see enough callers
in core to make it worth the extra overhead
Change-Id: Icdd292869b4198bed7725c51820f6b2111ad739d
In verbose mode it will log valid the strings found, otherwise it will
only complain when we encounter a missing string.
Unfortunately a missing string is not inherently a problem, due to
conditional expressions. So all we can do is complain in checkwps
or if wps debugging is turned on.
Meanwhile, this is the first step in actually enumerating the translated
strings used by themes.
Change-Id: Ia93b333085e825d5b085c4d372ad8e13aa3e3ba1
Annoyingly, this makes all of the '.S' files we compile get treated as
divided syntax, so we need to make the syntax in them explicit.
Change-Id: I56a3916b7b24c84a1214a5d6bc4ed4d651f002cf
* Use of ata_disk_can_poweroff() was inverted, resulting in SATA SSDs
getting powered off but leaving _everything_ else on, including spinning
rust!
* Replace the can_poweroff() heuristic with a test for the mandatory
ATA power mgmt feature flag. Notably, the CF->SD adapters don't claim
to support this!
* Eliminate duplicated tests in sleep code
* Wrap all poweroff-related code with HAVE_ATA_POWER_OFF
* Don't ever use SLEEP command, only STANDBY_IMMEDIATE
* Gate call to STANDBY_IMMEDIATE behind a can_poweroff() test
* Prefer FLUSH_CACHE_EXT to FLUSH_CACHE where available.
* Improve SSD detection heuristics to any of these:
* Explicltly identifies as SSD (covers newer CF and SATA)
* TRIM support
* CFA compliant AND (CF level 0 OR high speed support)
* Report SSD detection in debug menu
Change-Id: I7fcb83b6d6eabddc11c64326a573b08ab85412b5
Max allowed size: 120860
Old thumb build: 128494
New thumb build: 118514 (fits!)
Disabled:
Logo;
alpha blending capabilities for bitmaps;
Arm stack unwinder (backtrace);
Related forum discussion: https://forums.rockbox.org/index.php/topic,54768.0.html
Fixes FS#12380
Change-Id: I978720d795cb0ef5169103e467cf8386c21d8e93
v1 passes the drive and partition number of the boot volume
instead of using the volume number. The volume number isn't
reliable because the same filesystem might get a different
volume number once the firmware is loaded, which will cause
the firmware to use the wrong root volume and fail to locate
the correct .rockbox directory.
Using drive and partition numbers avoids this issue because
drive numbering is fixed and determined by the target.
Change-Id: I7e68b892d9424a1f686197a6122e139b438e5f7e
Instead of verifying the CRC before every access of the boot data,
verify the CRC once at startup and set a flag to indicate the boot
data is valid.
Also add a framework to support multiple boot protocol versions.
Firmware declares the maximum supported protocol version using a
version byte in the boot data header. The bootloader chooses the
highest version supported by it and the firmware when deciding
what boot protocol to use.
Change-Id: I810194625dc0833f026d2a23b8d64ed467fa6aca
These functions just reset some state related to the scroll engine,
which is already disabled for bootloaders. They get called from the
LCD code and compiled into the binary, but have no real effect when
the rest of the scroll engine is not present. Replacing the calls
with inline stubs gets rid of this dead code from bootloaders.
Change-Id: I12a6d8926e19477ae3a5913e7fc8aff41cecd970
The standard load_firmware() function is used on targets which
use the "scramble -add" method for generating Rockbox binaries.
While it tries to be a bit more generic and allows the CRC/data
offsets to be placed anywhere in the file, there are no targets
which actually need this flexibility, because they are all using
plain old "scramble -add".
So we can actually simplify load_firmware() and remove defines
from the target headers. All the targets used CRC offset = 0 and
data offset = 8, except for a few which I assume never supported
ROLO or were never tested -- eg. samsungyh820: the CRC and data
offsets cannot both be 0.
The actual motivation for this is removing the calls to lseek(),
which can help make bootloaders a tiny bit smaller, as lseek is
typically not used anywhere else in bootloaders.
Change-Id: Ic2d01e5b75a32e88363f085e3e839146a0710bf4
Turn off legacy codepage handling in the filesystem code for
bootloaders, and support ISO-8859-1 (Latin-1) only.
This only affects DOS 8.3 filename parsing when FAT32 long
names are unavailable; long names are Unicode and can always
be decoded properly regardless of this setting.
In reality, bootloaders never supported codepages other than
Latin-1 in the first place. They did contain the code to load
codepages from disk, but had no way to actually change the
codepage away from Latin-1.
Compiling out this useless codepage handling code frees up
precious space for very size-constrained bootloaders like the
Sansa e200v2.
Change-Id: I26b049dd648fed4a0cc61fa938faa84e9816ab7d
Unifies codec size with most targets.
Apart from other things increased size improves seek accuracy in long m4b audiobooks.
Tested on Agptek Rocker and XDuoo X3II
Related discussion: https://www.rockbox.org/tracker/task/13049#comment44591
Change-Id: Id246969e78386b71ac66aace128cfba72a3f209e
Define CONFIG_CPU if not defined
This fix makes sure that AAC-LC decoding is used both on device and simulator.
It's important for testing purposes as proper AAC-LC decoding requires changes both in decoder and in metadata handling.
Fixup for 4cd65b9d9.
Change-Id: Idef88825458761fffa3f5c5f4f221b555c509d89
Add HW volume control via ES9018K2M, and reorganize
eros_qn_codec.c/.h, audiohw-erosqnative.c.
This automatically detects the presence of the new DAC and
uses its hardware volume scaling. If not present, use same
SWVOL we have been using so far.
Add debug menu readout of SWVOL/I2C result.
Break out es9018k2m stuff into its own file so that
maybe it can be useful to other ports.
Note that we may need to get smarter about detecting the DAC
type if/when another model emerges.
Change-Id: I586a1cf7f150dd6b4e221157859825952840af56
Includes ipod video (5G) and earlier models, sansa c200 and others players not capable to decode AAC-HE.
Allows to play backward compatible files as AAC-LC.
Change-Id: Ic9f5c0f255d9a4308c3414d402f8f27f4328ca94
remove some duplicated strings previously allocd off the stack
just removing string duplications that are easily handled with truncation
now available with path_append_ex()
this also has an advantage of less stack used in worst case scenarios
Change-Id: I3a43e33ef8a8c36599e4c6c036a0ccdd8ed0c883
