* SOUND_x enum can be generated by audiohw_settings.h along with settings
entries and sound_val2phys.
* VOLUME_MIN and VOLUME_MAX are no longer necessary within sound.c. If
you need them, they are for target-defined purposes.
* Fix up SDL volume implementation in sdl.c. Move sim volume calculation
code to pcm-sdl.c.
* Min trigger tresholds were based upon VOLUME_MIN for some reason.
These setting have nothing to do with playback volume. Since it is no
longer present, set these at -89dB which is the minimum peak meter
sensitivity setting.
* Fix an oversight in wm8758.c. I forgot to add the dB->register
conversion to audiohw_set_volume.
Change-Id: Ie1df33f1793eee75e6793f16bc7bddd16edb7f75
This is going right in since it's long overdue. If anything is goofed,
drop me a line or just tweak it yourself if you know what's wrong. :-)
Make HW/SW codec interface more uniform when emulating HW functionality
on SWCODEC for functions such as "audiohw_set_pitch". The firmware-to-
DSP plumbing is in firmware/drivers/audiohw-swcodec.c. "sound_XXX"
APIs are all in sound.c with none in DSP code any longer.
Reduce number of settings definitions needed by each codec by providing
defaults for common ones like balance, channels and SW tone controls.
Remove need for separate SIM code and tables and add virtual codec header
for hosted targets.
Change-Id: I3f23702bca054fc9bda40f49824ce681bb7f777b
Onda VX747 sim was missing a limits #define; #include limits.h in
pcm_sw_volume.h.
Simply use the software volume control for the SIM volume control
rather than the SDL volume control when the target would have it
natively.
Change-Id: I8e924a2ff1b410f602452d2ea9b691efb82c931e
Implements double-buffered volume, balance and prescaling control in
the main PCM driver when HAVE_SW_VOLUME_CONTROL is defined ensuring
that all PCM is volume controlled and level changes are low in latency.
Supports -73 to +6 dB using a 15-bit factor so that no large-integer
math is needed.
Low-level hardware drivers do not have to implement it themselves but
parameters can be changed (currently defined in pcm-internal.h) to work
best with a particular SoC or to provide different volume ranges.
Volume and prescale calls should be made in the codec driver. It should
appear as a normal hardware interface. PCM volume calls expect .1 dB
units.
Change-Id: Idf6316a64ef4fb8abcede10707e1e6c6d01d57db
Reviewed-on: http://gerrit.rockbox.org/423
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
In the modern everything-can-be-skinned world, themes are beginning
to hit the limit of 8 fonts (which includes sysfont). Increasing this
to 12 will allow some headroom, at the cost of a bit more RAM usage
(about 20 bytes per extra possible font, so about 80 bytes total here)
Change-Id: Iddf4374b7ccf92b400614a7309bf3d2147ba98ab
This was spotted while playing with qemu-jz:
1) rockbox reads TECR and TESR which are described as write-only
registers. Datasheet doesn't mention what happens if they are
readed. Apparently this doesn't have fatal side effects.
It comes down to two defines from jz4740.h
__tcu_stop_counter(n) and __tcu_start_counter(n) which use
read-modify-write sequence.
2) rockbox accesses out of bound offset 0xd4 in DMA memspace.
It comes from dis_irq() in system-jz4740.c. NUM_DMA is 6 but
DMA channels are 0-5 so (irq <= IRQ_DMA_0 + NUM_DMA)) bound
check is wrong.
This are *NOT* tested on device.
Change-Id: I29dff6a4f828030877b7d50fbcc98866478b9e3d
Reviewed-on: http://gerrit.rockbox.org/338
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Tested-by: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
This patch adds to YP-R0 (and other future targets using Linux
framebuffer) the ability to use LCD_ENABLE to save some CPU cycles
while display is powered off.
This patch also changes the way to toggle LCD power: now using
a proper ioctl call, slightly more efficient.
Change-Id: I544de77f5abd4ac1c13d3fe3a6e40a30f7c0bece
Reviewed-on: http://gerrit.rockbox.org/410
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
As per title this patch aims at splitting common target
code and specific target code in a better way to
support future ports within the same environment
(e.g. Samsung YP-R1 where the Linux and the SoC
are the same, with differences in hardware devices
handling)
Change-Id: I67b4918c46403b184d3d8f42ab5aae7d01037fd0
Reviewed-on: http://gerrit.rockbox.org/409
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
The build of bootloader with HAVE_ATA_DMA fails because of missing
commit_discard_dcache(). This seems to be bigger problem as
bootloader builds don't call cache_init() also which seems wrong.
but I know too little about the PP platform to judge.
For now use ATA DMA only in regular builds.
Change-Id: I82873cb1771f5a95ebfbef91ce26744e3abd743c
PP502x ATA DMA was disabled in 55fab77 because it caused various
instability on all targets using it. This instability is fixed in
583c948 via FS#12391. Here, ATA DMA is enabled for all PP502x targets
except nano1g and hdd6330. For nano1g, there may be other causes of
instability and more testing is needed. ATA DMA does not work on hdd6330.
Change-Id: I786b9edb19e74e6eb957ab205ea026f0969200ac
Reviewed-on: http://gerrit.rockbox.org/340
Tested-by: David Hooper <dave@beermex.com>
Tested-by: Boris Gjenero <boris.gjenero@gmail.com>
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
Tested-by: Szymon Dziok <b0hoon@o2.pl>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
pcm_dma_apply_settings(): sets the configured PCM frequency,
all native CS42L55 sample rates are available.
Change-Id: I2fcd5581457a669c3044516804cb64fb972218d0
Fixes missing Settings - General Settings - System - Disk - Spindown
setting.
Change-Id: Iae686598dfd7ad4ca1faf8db9f1271e7808de752
Reviewed-on: http://gerrit.rockbox.org/376
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Tested-by: Michael Giacomelli <giac2000@hotmail.com>
Use %x9(id) to draw an image in the whole current viewport using the
9 segment drawer (which draws the corners as normal and *tiles*
the middle segments to the needed width/height).
Future work is to make it scale instead of tile
Change-Id: Ic3ed1cad93f96091694801eb442e0da5a2401203
Some USB controllers like the one of the Rockchip 27xx handle some
requests in pure hardware. This is especially a problem for two
of them:
- SET ADDR which is used by our core to track the DEFAULT/ADDRESS
state and is required for the drivers to work properly
- SET CONFIG which is used by our core to initialise the drivers
by calling init_connection()
In these cases we need a way to notify the core that such requests
happened.
We do this by exporting two functions which directly notify the
core about these requests and perform the necessary init steps
required without doing the actual USB transfers. Special care is
needed because these functions could be called from an interrupt
handler. For this reason we still use the usb_queue and introduce
new IDs so that they are processed in order and safely.
No functional change is intended, both in the usbstack and on
targets without such quirks.
Change-Id: Ie42feffd4584e88bf37cff018b627f333dca1140
* Adds some additional niftyness like a floating popup display that
is implemented in an OSD library for use by other plugins.
* Speed changes are now gradual for both views and follow a curve
derived from some fiddling around to get a nice feel.
* Refined a few behavioral things overall.
It needs a bit of help from a direct PCM channel callback so it may
capture PCM for waveform display. Also need a few other core routines
to help out for the OSD.
Messes with some keymaps. Some targets need keymaps to access the
different views. Some devices can't support the additional view
because it requires a large buffer ( > 1 s) for samples.
If the plugin buffer is small, they can still use the popup display
since the plugin is also much smaller in that case.
Slow speed waveform needs some refining so it draws gradually like
a real oscilloscope but I'll stick with what it is, for the moment.
Change-Id: Ieb5b7922a2238264e9b19a58cb437739194eb036
Reviewed-on: http://gerrit.rockbox.org/245
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
The running count is only 16-bit wide, since the always tick
setting derives from the crystal clock at 24MHz the user timer
cannot be set lower than ~300Hz which is already too high.
Switch to the 32KHz crystal source to fix this.
Change-Id: Ie7775460b17ea7ab331738734e3d688ad5563857
Uses register polling method to decide when it's time to decode
RDS packets.
Change-Id: I1d3cc995ea3350ec7b101438b8f2027130d4a4c9
Reviewed-on: http://gerrit.rockbox.org/320
Reviewed-by: Lorenzo Miori <memorys60@gmail.com>
Tested-by: Lorenzo Miori <memorys60@gmail.com>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
Make set_sleep_timer a static function and only call
set_sleeptimer_duration externally, which is always called with minutes
values.
Change-Id: I985308bf014e354f91c47a0b2bf62f4f5a591919
Reviewed-on: http://gerrit.rockbox.org/327
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Use DMA engine for fullscreen updates and bypass mode for partial
updates. This gives major boost on rk27generic:
default ARM:AHB:APB 200💯50
HEAD 1/1: 26.3fps 1/4: 105.0fps
patched 1/1: 116.5fps 1/4: 249.5fps
with freq scalling NORMAL mode ARM:AHB:APB 50:50:50
HEAD 1/1: 13.1fps 1/4: 52.5fps
patched 1/1: 54.5fps 1/4: 119.0fps
Tested on rk27generic noname DAP and on Hifimans.
Change-Id: Id9dd4d2d61542c7ea6b5c6336b170d6357cefde9
Implemented scheme:
ARM AHB APB
Normal 50 50 50 MHz
Max 200 100 50 MHz
Frequency scaling is disabled on rk27generic due to too
slow lcd updates when running with 50MHz AHB.
battery_bench shows ~1h runtime improvement on hifiman.
Change-Id: I2c6f8acf6d4570c4e14f5bcc72280b51ce13c408
Due to the way Archos devices (i.e. the only HWCODEC devices) boot,
memory is tight these days. Disabling LOGFDISK on them will make them
work for now. In the long term a better solution is needed.
Change-Id: Ifc6bb97a81cc33545294e319bbc0a6c499788d39
Further merge drivers by using the same command and data functions.
No use one mutex per drive instead of a global sd lock. Fix the
RCA handling which was different between SD and MMC (shifted 16)
and thus confusing. Add MMC commands definition to the mmc.h
header similarly to the SD one. Change MMC handling a bit by
selecting/deselecting on each transfer like SD, which allows
for several MMC devices in theory and is more uniform.
Change-Id: I7024cb19c079553806138ead75b00640f1d2d95c
Merge sd and mmc drivers into a single sdmmc driver. This allows
some factoring of the code and simplify bug fixing. Also fix the
dma/cache related issue by doing all transfers via a correctly
aligned buffer. The current code is not smart enough to take
advantage of large user buffers currently but at least it is safe!
Change-Id: Ib0fd16dc7d52ef7bfe99fd586e03ecf08691edcd
Also, add dummy defines for application targets so that ERRORF, etc
map to DEBUGF instead of a compile error and add a new line at the
end of logf.c.
Change-Id: Ie7c5bc3397a853af619e810defce6123114e7a51
Logs information, errors, etc to disk using the register_storage_idle_func
mechanism to write to the disk when available. Currently, this is disabled
in normal builds, but can be enabled by adding ROCKBOX_HAS_LOGDISKF to the
config file. By default, it uses a 2KB buffer and drops text if the buffer
overflows.
The system includes a simple warning level mechanism that can be used to by
default exclude non-serious errors from logging on release builds.
Change-Id: I0a3d186a93625c7c93dae37b993a0d37e5a3a925
Reviewed-on: http://gerrit.rockbox.org/288
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Tested-by: Michael Giacomelli <mgiacomelli@gmail.com>
Reviewed-by: Michael Giacomelli <mgiacomelli@gmail.com>
It was also broken functionally, probably since a while.So restore the
functionality. Run it on the dap, the tcd files will be placed into .rockbox folder.
Change-Id: Id7a6ce4389dfaf99799258902be80d630af0601c
