* HAVE_MULTIDRIVE implies HAVE_MULTIVOLUME as the latter is always
removeable storage
* SD storage implies MULTIVOLUME
* ATA storage (with HAVE_LBA48) implies MULTIVOLUME
* Replace HAVE_MULTIDRIVE && NUM_DRIVES == 1 with HAVE_MULTIVOLUME
Since SD and ATA can exceed 2TB, we need multiple volumes to fully
utilize available storage with FAT32.
In practice I believe this only affects the ipod devices.
Change-Id: Ia597770948b0e2b47630f7264ad34f225a33a640
The standard load_firmware() function is used on targets which
use the "scramble -add" method for generating Rockbox binaries.
While it tries to be a bit more generic and allows the CRC/data
offsets to be placed anywhere in the file, there are no targets
which actually need this flexibility, because they are all using
plain old "scramble -add".
So we can actually simplify load_firmware() and remove defines
from the target headers. All the targets used CRC offset = 0 and
data offset = 8, except for a few which I assume never supported
ROLO or were never tested -- eg. samsungyh820: the CRC and data
offsets cannot both be 0.
The actual motivation for this is removing the calls to lseek(),
which can help make bootloaders a tiny bit smaller, as lseek is
typically not used anywhere else in bootloaders.
Change-Id: Ic2d01e5b75a32e88363f085e3e839146a0710bf4
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
