remove nvram and use the existing settings framework for it
add a crc check to the user_settings data to see if we need to save
the user setting file or if we can just save the status file (resume.cfg)
move volume to the system_status struct so we don't write the whole settings file
over volume changes
allow user to still export volume with save sound settings
allow the user to also export pitch and speed
name the file .resume.cfg
Rename all the SYSTEM_STATUS save file variables to TLAs to save space and
discourage tinkering
Cleanup DEBUG_AVAIL_SETTINGS output
when saving user_settings it calls status_save as well this cause the resume
file to be written twice. instead remove the callback for status_save
when setting_save is called
remove header text when saving .resume.cfg
convert status_save() to status_save(bool force)
add SYSTEM_STATUS_UPDATE_TICKS
for ATA device set this to 5 minutes
since we arlready wait for the disk to be up before saving
we don't want to miss our window
for all other every 15 minutes
that way if the battery is too low by the time shutdown comes around you
don't lose much progress
Change-Id: I27214ffd6e5d5494ee5ca83b14f04a41ba426ad7
Turns out they did not swap the stereo switch lines on us,
so this setting isn't really useful. Repurpose it to allow
the user to force the device into headphone or line output mode.
Note that settings other than "Automatic" will cause jack detection
to not work.
Default Automatic.
Change-Id: If94499fbb8f0d92111811fe51f6107ce213b66ad
Hopefully this should cover our bases so we can change
the behavior of the stereo switch to keep line out working
when they change the hardware on us!
Change-Id: Ic36bcb3778d5681a5f3f158c689df9c1420c1d7e
since int_setting is the largest struct in the union of settings
saving 32 bytes adds up over every setting
frees ~200 bytes
Change-Id: Id4722262e40db3021c740e138fe7352be10e2c70
This allows the user to make use of the DAC's power-saving abilities.
The two modes are "high performance" and "battery saver". This feature
is supported by the AK4376 DAC in the upcoming FiiO M3K port.
The setting is only a manual toggle right now, but in the future it
could be hooked up to the battery level (via another setting) so it
can be toggled automatically when the battery gets too low.
Change-Id: I482af6e2f969fcbdeb3411bd3ff91f866b12d027
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
keep running into the rigid nature of do_menu
it isn't too bad when you don't need voice but once
you do the fun awaits
do_menu likes to talk on menu enter which is in a loop when you use do_menu
I would like to move the processing to the callback
TOO BAD you only get an action and the menu_item_ex struct
you sent it when calling the function
Change-Id: Iaefd0cc133435d675b7dd27a558c504d6ccb327a
Cleaned up, rebased, and forward-ported from the xvortex fork.
(original credit to vsoftster@gmail.com)
Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
The implementation is not very complicated but there are a few things worth
noting. There was a previous "speaker enable" setting but it was a boolean.
I decided to replace it with a choice setting that has 2 options (on, off)
if headphones cannot be detect on this target, or 3 options (on, off, auto)
if we can detect headphones. This will break the old setting on target that
cannot detect jack but it makes the code more uniform and avoid maintaining
two settings with more #ifdef. The third option (auto) uses the LANG_AUTO
text, which I think is clear enough (disable speaker on jack plug).
In order to avoid code duplication (both in apps and firmware), I decided to
keep the audiohw_enable_speaker function as-is: it takes a boolean and doesn't
care about the speaker policy. I introduced a new audio_enable_speaker that
takes directly the mode (which follows the setting encoding): 0=off, 1=on
and 2=auto. This way one calls audio_enable_speaker and it changes the speaker
once to reflect the request mode. The apps code then uses this function in the
places where it makes sense: on setting load, setting change and jack (un)plug
event.
Change-Id: I027873f698eb4bc365d7c02b515297806355d9e2
perceptual bass enhancement
- a bbe-ish group delay corrction with Biophonic EQ boost.
- precut
auditory fatigue reduction
-reduce signal in frequency that may trigger temporary threshold shift
haas surround
-frequency between f(x1) and f(x2) is always bypassed.
-can apply to side only.
Change-Id: Icb6355ce9b1c99bf2c58c9385c3c411c0ae209d3
Add a "volume limit" parameter to the configuration file. The maximum
value of volume setting in sound menu will be limited to the same as
volume limit. Also each time when setvol() is excuted, Rockbox will
check if the global_settings.volume value larger than
global_settings.volume_limit. If larger, take the value of volume_limit
instead. The volume_limit argument shares the same maximum and minimum values
with volume argument, while taking the maximum volume as its default value.
Change-Id: I8ca9bc6ea6e617b48fc346aae5f2a0a1d259ae36
Reviewed-on: http://gerrit.rockbox.org/697
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
This is an improvement to the current compressor which I have added
to my own Sansa Fuze V2 build. I am submitting here in case others
find it interesting.
Features added to the existing compressor:
Attack, Look-ahead, Sidechain Filtering.
Exponential attack and release characteristic response.
Benefits from adding missing features:
Attack:
Preserve perceived "brightness" of tone by letting onset transients
come through at a higher level than the rest of the compressed program
material.
Look-ahead:
With Attack comes clipping on the leading several cycles of a transient
onset. With look-ahead function, this can be pre-emptively mitigated with
a slower gain change (less distortion). Look-ahead limiting is implemented
to prevent clipping while keeping gain change ramp to an interval near 3ms
instead of instant attack.
The existing compressor implementation distorts the leading edge of a
transient by causing instant gain change, resulting in log() distortion.
This sounds "woofy" to me.
Exponential Attack/Release:
eMore natural sounding. On attack, this is a true straight line of 10dB per
attack interval. Release is a little different, however, sounds natural as
an analog compressor.
Sidechain Filtering:
Mild high-pass filter reduces response to low frequency onsets. For example,
a hard kick drum is less likely to make the whole of the program material
appear to fade in and out. Combined with a moderate attack time, such a
transient will ride through with minimal audible artifact.
Overall these changes make dynamic music sound more "open", more natural. The
goal of a compressor is to make dyanamic music sound louder without necessarily
sounding as though it has been compressed. I believe these changes come closer to this goal.
Enjoy. If not, I am enjoying it
Change-Id: I664eace546c364b815b4dc9ed4a72849231a0eb2
Reviewed-on: http://gerrit.rockbox.org/626
Tested: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Also move the definition to config.h
Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius <nils@rockbox.org>
a bool to appear the same as the old API. Possibly fixes some bugs, but
doubtful.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12772 a1c6a512-1295-4272-9138-f99709370657
Icons are now used by their id which must be part of the icons_6x8 enum,
or Icon_NOICON for none
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12571 a1c6a512-1295-4272-9138-f99709370657
Blind users: get a new voice file as there are lots of lang changes and new strings.
FS#6630 or RootMenu on the wiki for more info. complaints to /dev/null :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12528 a1c6a512-1295-4272-9138-f99709370657
Any menus which dont yet show them are not converted to the new system.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12300 a1c6a512-1295-4272-9138-f99709370657
Remove apps/recording_settings_menu.c which should never have been
commited
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12293 a1c6a512-1295-4272-9138-f99709370657
